3.0x1.0mm SMD CHIP LED LAMP APBA3010SRSGWPR SUPER BRIGHT RED SUPER BRIGHT GREEN Features Description !3.0mmx1.0mm SMT LED, 2.0mm THICKNESS. The Super Bright Red source color devices are made with !LOW Gallium Aluminum Arsenide Red Light Emitting Diode. POWER CONSUMPTION. !WIDE VIEWING ANGLE. The Super Bright Green source color devices are made with !IDEAL FOR BACKLIGHT AND INDICATOR. Gallium Phosphide Green Light Emitting Diode. !VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: CDA0208 APPROVED : J. Lu REV NO: V.3 CHECKED : DATE: MAR/30/2002 DRAWN: L.Q.YANG PAGE: 1 OF 4 Selection Guide Par t No . Dic e APBA3010SRSGWPR Iv (m c d ) @ 20 m A L en s Ty p e SUPER BRIGHT RED (GaAlAs) SUPER BRIGHT GREEN (GaP) WHITE DIFFUSED V i ew i n g An g l e Min . Ty p . 40 70 8 16 21/2 140 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25C Sy m b o l Par am et er peak Peak Wavelength Super Bright Red Super Bright Green D Dominate Wavelength 1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 660 565 nm IF=20mA Super Bright Red Super Bright Green 640 568 nm IF=20mA Spectral Line Halfwidth Super Bright Red Super Bright Green 20 30 nm IF=20mA pF VF=0V;f=1MHz 2.5 2.5 V IF=20mA 10 uA V R = 5V C Capacitance Super Bright Red Super Bright Green 45 15 VF Forward Voltage Super Bright Red Super Bright Green 1.85 2.2 IR Reverse Current All Max . Absolute Maximum Ratings at T)=25C P ar am e t e r S u p er B r i g h t R ed Su p er B r ig h t Gr een Un it s Power dissipation 100 10 5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 155 140 mA 5 5 V Reverse Voltage -40C To +85C Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: CDA0208 APPROVED : J. Lu REV NO: V.3 CHECKED : DATE: MAR/30/2002 DRAWN: L.Q.YANG PAGE: 2 OF 4 Super Bright Red / Super Bright Green SPEC NO: CDA0208 APPROVED : J. Lu REV NO: V.3 CHECKED : APBA3010SRSGWPR DATE: MAR/30/2002 DRAWN: L.Q.YANG PAGE: 3 OF 4 APBA3010SRSGWPR SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: CDA0208 APPROVED : J. Lu REV NO: V.3 CHECKED : DATE: MAR/30/2002 DRAWN: L.Q.YANG PAGE: 4 OF 4