DO NOT
SCALE FROM
THIS PRINT
-01: 1 POSITION (SEE NOTE 4)
-02: 2 POSITIONS
-04: 4 POSITIONS
-06: 6 POSITIONS
-08: 8 POSITIONS
*-10: 10 POSITIONS
(*=NOT TOOLED)
LEAD STYLE
No. OF POSITIONS PER ROW
*-02.0 (SEE TABLE 1 & 5)
*-03.0 (SEE TABLE 1 & 6)
*-04.0 (SEE TABLE 1 & 6)
-05.0 (SEE TABLE 1 & 6)
*-06.0 (SEE TABLE 1 & 6)
*-07.0 (SEE TABLE 1 & 6)
*-08.0 (SEE TABLE 1 & 6)
*-09.0 (SEE TABLE 1 & 6)
*-10.0 (SEE TABLE 1 & 6)
*-11.0 (SEE TABLE 1 & 6)
(* NOT TOOLED)
IP5-XX-XX.X-X-X-X-X-TR
TAIL OPTIONS
ROW
PLATING OPTIONS
-S: SELECTIVE, 30 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN
ON CONTACT, MATTE TIN TAIL
-1: .062" THICK BOARD
*-2: .093" THICK BOARD
(*= NOT TOOLED)
OPTION
-L: CABLE LATCH
(SEE NOTE 5)
(*=NOT TOOLED)
-S: SINGLE ROW
-D: DOUBLE ROW
(SEE NOTE 4)
PACKAGING
-TR: TAPE & REEL
(SEE NOTE 3)
"B"
(REF)
"A"
(REF)
"F"
.1575
.0050 [4.001
0.127] = "E"
"D" EQUAL SPACES @
0°
±.5°
SWAY
(EITHER DIRECTION)
"A"
"A"
"B" "B"
IP-XX-XX.X-S
PIN 1
INDICATOR
C1
C3
.336
(REF)
8.53 .080
(REF)
2.03
"C"
(REF)
.060
(REF)
1.52
.158 [4.00] = "E"
"D" EQUAL SPACES @
.158
±.005
4.00
±0.127
"G"
"G"
ITP5-XX.X-X-X
C2
C
L
C
FIG.1
(IP5-04-05.0-L-S-X SHOWN)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES [MILLIMETERS]
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0030 [.076]
MATERIAL:
BY:
IP5-XX-XX.X-X-X-X-X-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
PIERCE
11/10/2007
3
1
SHEET SCALE: 4:1
F:\DWG\MISC\Mktg\IP5-XX-XX.X-X-X-X-X-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
BODY: HIGH TEMP NYLON, COLOR: BLACK
SHIELD: COPPER ALLOY
TERMINAL: COPPER ALLOY
DIELECTRIC: LCP, COLOR: BLACK
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSH OUT FORCE .5 LBS. [0.23 Kg.]
3. FOR QUANTITIES UP TO 49 PCS., NO LEADER, TRAILER OR REEL WILL BE SUPPLIED,
FOR QUANTITES OF 50 TO 124 PCS., NO LEADER OR TRAILER WILL BE SUPPLIED.
4. -01 POSITION NOT AVAILABLE WITH -D ROW OPTION
5. -L: CABLE LATCH OPTION ONLY AVAILABLE IN -05.0 LEAD STYLE & -S ROW OPTION.
6. LOAD WELD TAB WITH LANCES FACING INWARD.
TERMINAL ARRAY ASSEMBLY, IP5 CONNECTOR
REVISION C
.045
(REF)
1.15
.076 1.92
(REF)
"G"
(REF)
SECTION "A"-"A"
SCALE 5 : 1
.493
(REF)
12.52
.393
(REF)
9.98
"C"
"C"
"F"
"F"
FIG.2
(IP5-04-XX.X-L-D-X SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
IP-XX-XX.X-D
ITP5-XX.X-X-X
.045
(REF)
1.15
.157 4.00
(REF)
SECTION "C"-"C"
SCALE 3 : 1
.060 1.52
(REF)
.060 1.52
(REF)
.018 0.46
(REF)
.018 0.46
(REF)
.016 0.41
(REF)
SECTION "B"-"B"
SCALE 10 : 1
FIG.3
(IP5-04-02.0-L-S-X SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
IP-XX-02.0-S
ITP5-XX.X-X-X
SECTION "F"-"F"
SCALE 3 : 1
CLIP SIDE
SECTION "G"-"G"
SCALE 5 : 1
CLIP SIDE
SHEET OF
TERMINAL ARRAY ASSEMBLY, IP5 CONNECTOR
BY:
IP5-XX-XX.X-X-X-X-X-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
PIERCE
11/10/2007
3
2
SHEET SCALE: 4:1
REVISION C
F:\DWG\MISC\Mktg\IP5-XX-XX.X-X-X-X-X-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
"H"
(REF)
"D"
"D"
"E"
"E"
IP-04-05.0-L
ITP5-XX.X-X-X
.062 1.57
.010 0.25
(REF)
2°
MAX SWAY
(EITHER DIRECTION)
"J"
±.005
(SEE NOTE 6)
SECTION "D"-"D"
FIG.4
(IP5-04-05.0-L-S-X-L SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
C5
C4
.025 0.64
(REF)
SECTION "E"-"E"
WT-25-04-T
SHEET OF
TERMINAL ARRAY ASSEMBLY, IP5 CONNECTOR
BY:
IP5-XX-XX.X-X-X-X-X-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
PIERCE
11/10/2007
3
3
SHEET SCALE: 4:1
REVISION C
F:\DWG\MISC\Mktg\IP5-XX-XX.X-X-X-X-X-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
