FSS12L........FSS115L 1.0 Amp. Surface Mounted Glass Passivated Schottky Barrier Rectifier Dimensions in mm. Voltage 20 to 150 V CASE: M1F (DO219AA) Current 1.0 A R For surface mounted application Low profile package Ideal for automated pick & place Low power loss, high efficiency High current capability,low VF High surge current capability Plastic material used carriers Underwriters Laboratory Classification 94V-0 Epitaxial construction High temperature soldering: 260 C / 10 seconds at terminals MECHANICAL DATA Case: Sub SMA plastic case Terminal: Pure tin plated, lead free. Polarity: Color band denotes cathode end Packaging: 12 mm tape per EIA STD RS-481 Weight approx. 15 mg XXX = Marking code WW = Week code Y = Year code Maximun Ratings and Electrical Characteristics at 25 C FSS12L FSS13L FSS14L FSS16L FSS110L FSS115L Marking Code L12 L13 L14 L16 LX0 LX5 VRRM Maximum Recurrent Peak Reverse Voltage (V) 20 30 40 60 100 150 VRMS Maximum RMS Voltage (V) 14 21 28 42 70 105 VDC Maximum DC Blocking Voltage (V) 20 30 40 60 100 150 I(AV) Maximum Average Forward Rectified Current 1.0 A IFSM Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC Metod) 30 A 0.58 V 0.70 V 0.65 V 0.80 V 0.75 V 0.90 V VF IR Rth (j-a) Maximum Instantaneous Forward Voltage (Note 1) @ 0.5A @ 1.0A Maximum DC Reverse Current @ Ta = 25 C at Rated DC Blocking Voltage @ Ta = 100 C 0.385 V 0.45 V 8.0 mA 0.43 V 0.50 V 0.51 V 0.55 V 0.4 mA 6.0 mA Maximum Thermal Resistance (Note 2) 0.05 mA 0.5 mA 100 C/W Rth (j-l) 45 C/W Tj Operating Temperature Range Tstg Storage Temperature Range -55 to + 125 C -55 to + 150 C -55 to + 150 C Notes: 1. Pulse Test with PW=300 sec, 1% Duty Cycle. 2. Measured on P.C. Board with 5.0mm x 5.0mm Copper Pad Areas. May - 11 FSS1.L Rating And Characteristic Curves IF(AV), average forward current (A) 1.2 1.0 FSS16L-115L 0.8 0.6 FSS12L-14L 0.4 0.2 0 0 TYPICAL FORWARD CHARACTERISTICS IF, instantaneous forward current (A) MAXIMUM FORWARD CURRENT DERATING CURVE 20 40 60 80 100 120 140 160 100 50 20 10 5 FSS16L FSS13L-FSS14L FSS12L 2 1 0.5 FSS115L 0.2 0.1 0.05 FSS110L 0.02 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Lead temperature (C) VF, forward voltage (V) TYPICAL JUNCTION CAPACITANCE 100 100 50 50 Cj, junction capacitance (pF) IFSM, peak forward current (A) MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 20 10 5 8.3ms Single Half Sine Wave Tj=Tj max 2 1 1 2 5 10 20 Tj = 25 C f = 1.0 MHz Vsig = 50mVp-p 20 10 5 2 1 0.1 50 100 Number of cycles at 60 Hz Tj = 75 C 100 10 Tj = 25 C 1 0.1 0 20 40 60 80 100 120 140 Percent of rated peak reverse voltage (%) 1000 100 TYPICAL TRANSIENT THERMAL CHARACTERISTICS Transient thermal impedance (C/W) IR, instantaneous reverse current (mA) Tj = 100 C 1000 10 VR, reverse voltage (V) TYPICAL REVERSE CHARACTERISTICS 10000 1.0 100 10 1 0.1 0.01 0.1 1 10 100 T, pulse duration (sec.) May - 11