MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KXE 160 to 400Vdc long life, 105 Series KXF For LED light circuits and other long life applications Rated voltage range : 160 to 400 Vdc , Capacitance range : 3.3 to 33F Endurance with ripple current : 10,000 to 12,000 hours at 105 Non solvent resistant type RoHS2 Compliant Longer life KXE SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105 160 to 400Vdc 20% (M) (at 20, 120Hz) After 1 minute After 5 minutes CV1,000 I=0.1CV+40 I=0.03CV+15 CV>1,000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20) Rated voltage (Vdc) 160 to 400V tan (Max.) 0.24 (at 20, 120Hz) Rated voltage (Vdc) 160 to 400V Z(-25)/Z(+20) 4 Z(-40)/Z(+20) 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (12,000 hours for10x16L) at 105. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan) 300% of the initial specified value Leakage current 500% of the initial specified value Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life DIMENSIONS [mm] Code : E D' d Sleeve (PET : Brown) F0.5 Terminal L' Vent 4min. 15min. Gas escape end seal D d F D' L' 10 0.6 5.0 D+0.5max. L+1.5max. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KXE AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 3.3F:3R3,33F:330) Lead forming*taping code Terminal code Voltage code (ex. 160V:161,400V:401) Series code Category Please refer to "Product code guide (radial lead type)" RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Capacitance(F) Frequency(Hz) 3.3 to 33 120 1.00 1k 1.75 10k 2.25 100k 2.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001T MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 400Vdc long life, 105 KXESeries STANDARD RATINGS WV (Vdc) 160 200 400 Cap (F) Case size DxL(mm) tan Rated ripple current(mArms/105) 120Hz 100kHz Part No. 15 22 10x 12.5 10x 12.5 0.24 0.24 80 95 200 237 EKXE161E150MJC5S EKXE161E220MJC5S 27 33 12 15 18 27 3.3 4.7 5.6 6.8 6.8 10x 16 10x 16 10x 12.5 10x16 10x12.5 10x16 10x12.5 10x16 10x16 10x12.5 10x 16 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 105 130 70 90 85 120 60 90 100 85 115 262 325 175 225 212 300 150 225 250 212 287 EKXE161E270MJ16S EKXE161E330MJ16S EKXE201E120MJC5S EKXE201E150MJ16S EKXE201E180MJC5S EKXE201E270MJ16S EKXE401E3R3MJC5S EKXE401E4R7MJ16S EKXE401E5R6MJ16S EKXE401E6R8MJC5S EKXE401E6R8MJ16S : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001T