3MTM Static Shielding Bag SCC 1000 Sizes on Page 2 Open Top ZipTop Static Shielding Bag ~ Metal-In This transparent, metallized static shield bag helps provide a static safe environment for sensitive electronic devices. Four layer construction. Polyester dielectric and metal layer provide Faraday effect shielding of ESD and fields. Tribocharging is minimized by the specially processed polyethylene. Flat and zipper closure styles. Coded for QC traceability. These bags are tested to meet or exceed certain electrical and physical requirements of ANSI/ESD S541, EIA 625, and to be ANSI/ESD S20.20 program compliant. Specifications Electrical Properties: Surface Resistivity / Resistance Interior Exterior Metal Static Shielding Static Shielding Static Decay Charge Generation PTFE Quartz Physical Properties: Tensile Strength Seam Strength Light Transmission Heat Sealing Conditions Temperature Time Pressure Thickness Silicone or Amine Content Material Structure Typical Values Test Method* ASTM D257 or ANSI/ESD STM11.11 <1012 ohms/square or <1011 ohms <1012 ohms/square or <1011 ohms 100 ohms < 30 volts < 10 nJ < 2 seconds EIA 541 ANSI/ESD STM11.31 MIL-STD-3010 4046 0.09 nC/sq.in. 0.01 nC/sq.in. Modified Inclined Plane 4700 PSI > 10 lbs 40 % ASTM D 882 ASTM D 882 Tobias 250oF - 375o F 0.5 - 3.5 seconds 30 - 70 PSI 3 mils** Not detected STATIC DISSIPATIVE SCC 1000 open top and ZipTop static shielding COATING bags are manufactured from industry approved POLYESTER Polyester/Metal/Polyethylene laminates. The polyester dielectric in concert with the metal ALUMINUM SHIELD layer provide Faraday Effect shielding of an Electrostatic Discharge (ESD). The metal layer STATIC prevents the penetration of damaging electrostatic fields. Tribocharging is minimized by the DISSIPATIVE POLYETHYLENE specially processed polyethylene. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. *This product is not on the Qualified Product Listing under the MIL-STD-3010 1003 +/-20% FTIR ** tolerance +/-15% See 3M Data Sheets for these related items: Static Warning Labels Heat Sealer Defense Standardization Program. P SCC 1000 R O D U C T D A Static Shielding Bag METAL-IN PRODUCT ITEM NUMBER DATASHEET STATIC SHIELDING BAG, OPEN TOP AND ZIPTOP 100(W")(L") 1100-A 98-0799-1068-7 T A S H E E T 3M is a trademark of 3M Company. 3M Electronic Solutions Division All other trademarks herein are the property 6801 River Place Blvd of their respective owners. Austin, TX 78726-9000 US and Canada: 866-722-3736 Fax: 866-722-3735 Intl: 919-718-0000; Fax: 919-774-8174 email: 3Mstaticinfo@mmm.com; www.3Mstatic.com (c) 3M 2012. All rights reserved. 3M SCC 1000 Open Top 3MTM Static Shielding Bag SCC 1000 3M SCC 1000 ZipTop OPENING OPENING Open Top Static Shielding Bag ~ Metal-In ZIPTOP 1" W"x L" 2x3 2x4 2x6 3x5 4x4 4x6 4x8 4 x 24 4 x 26 4 x 30 5x6 5x7 5x8 5 x 10 6x8 6x9 6 x 10 6 x 12 6 x 14 6 x 16 6 x 18 6 x 24 6 x 26 6 x 30 6.5 x 10 6.5 x 16 P/N 10023 10024 10026 10035 10044 10046 10048 100424 100426 100430 10056 10057 10058 100510 10068 10069 100610 100612 100614 100616 100618 100624 100626 100630 1006.510 1006.516 W"x L" P/N 7 x 8 10078 7 x 10 100710 7 x 11 100711 7 x 15 100715 7 x 16 100716 8 x 8 10088 8 x 10 100810 8 x 12 100812 8 x 14 100814 8 x 16 100816 8 x 18 100818 8 x 24 100824 8 x 30 100830 9 x 12 100912 10 x 12 1001012 10 x 14 1001014 10 x 16 1001016 10 x 18 1001018 10 x 24 1001024 10 x 26 1001026 10 x 30 1001030 11 x 14 1001114 11 x 15 1001115 12 x 12 1001212 12 x 14 1001214 12 x 16 1001216 W"x L" P/N 12 x 18 1001218 12 x 24 1001224 12 x 25 1001225 12 x 30 1001230 14 x 16 1001416 14 x 18 1001418 14 x 20 1001420 14 x 30 1001430 15 x 18 1001518 16 x 18 1001618 16 x 20 1001620 16 x 24 1001624 16 x 30 1001630 18 x 18 1001818 18 x 20 1001820 18 x 24 1001824 18 x 30 1001830 20 x 20 1002020 20 x 24 1002024 22 x 24 1002224 24 x 24 1002424 24 x 30 1002430 24 x 36 1002436 30 x 24 1003024 SEAL LENGTH SCC 1000 R O D U C LENGTH FOLD FOLD WIDTH WIDTH SEAM WIDTH SEAM WIDTH 3MTM Static Shielding Bag SCC 1000 ZipTop TM Recloseable Static Shielding Bag ~ Metal-In W"x L" 2x3 3x3 3x5 4x4 4x6 4x8 4 x 24 4 x 30 5x8 5 x 10 6x8 6 x 10 All standard sizes in-stock/same day shipment. Width is measured from inside seam to inside seam. Length is measured from the top edge to the bottom fold. Opening is in the "width" dimension. Custom bag sizes, custom printing, and custom hot stamping are available. Most sizes are packed 100 per case. Small sizes are packed 1000 or 500 per case. P SEAL T D A Static Shielding Bag METAL-IN PRODUCT ITEM NUMBER DATASHEET STATIC SHIELDING BAG, OPEN TOP AND ZIPTOP 100(W")(L") 1100-A 98-0799-1068-7 T P/N 30023 30033 30035 30044 30046 30048 300424 300430 30058 300510 30068 300610 A W" x L" P/N 6 x 24 300624 6 x 30 300630 7 x 15 300715 8 x 8 30088 8 x 10 300810 8 x 12 300812 9 x 12 300912 10 x 10 3001010 10 x 12 3001012 10 x 14 3001014 10 x 24 3001024 10 x 30 3001030 S H E E W" x L" P/N 11 x 15 3001115 12 x 12 3001212 12 x 16 3001216 12 x 18 3001218 14 x 18 3001418 15 x 18 3001518 16 x 24 3001624 18 x 18 3001818 18 x 24 3001824 20 x 24 3002024 24 x 24 3002424 T 3M is a trademark of 3M Company. 3M Electronic Solutions Division All other trademarks herein are the property 6801 River Place Blvd of their respective owners. Austin, TX 78726-9000 US and Canada: 866-722-3736 Fax: 866-722-3735 Intl: 919-718-0000; Fax: 919-774-8174 email: 3Mstaticinfo@mmm.com; www.3Mstatic.com (c) 3M 2012. All rights reserved.