SGLS175 - AUGUST 2003 D Qualification in Accordance With D D D D D D D D D Contact factory for details. Q100 qualification data available on request. description D PACKAGE (TOP VIEW) 1OUT 1IN - 1IN + VDD - /GND 1 8 2 7 3 6 4 5 VDD + 2OUT 2IN - 2IN + HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 5 VDD = 5 V VOH - High-Level Output Voltage - V D D AEC-Q100 Qualified for Automotive Applications Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) Output Swing Includes Both Supply Rails Extended Common-Mode Input Voltage Range . . . 0 V to 4.5 V (Min) With 5-V Single Supply No Phase Inversion Low Noise . . . 18 nV/Hz Typ at f = 1 kHz Low Input Offset Voltage 950 V Max at TA = 25C (TLV2422A) Low Input Bias Current . . . 1 pA Typ Micropower Operation . . . 50 A Per Channel 600- Output Drive TA = -40C 4 TA = 25C 3 2 TA = 85C 1 TA = 125C 0 The TLV2422 and TLV2422A are dual low-voltage 4 8 12 16 20 24 28 32 36 40 0 operational amplifiers from Texas Instruments. IOH - High-Level Output Current - mA The common-mode input voltage range for this device has been extended over the typical CMOS Figure 1 amplifiers making them suitable for a wide range of applications. In addition, the devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. The TLV2422 only requires 50 A of supply current per channel, making it ideal for battery-powered applications. The TLV2422 also has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecom applications. Other members in the TLV2422 family are the high-power, TLV2442, and low-power, TLV2432, versions. The TLV2422, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels and low-voltage operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single- or split-supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV2422A is available with a maximum input offset voltage of 950 V. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Advanced LinCMOS is a trademark of Texas Instruments. Copyright 2003, Texas Instruments Incorporated !"#$ %" & '##% & "! (')* %" %+ #"'%& "!"#$ %" &(! %"& (# %, %#$& "! - & &%#'$%& &% # . ## %/+ #"'%" (#"&&0 "& "% && #*/ *' %&%0 "! ** ( # $%#&+ POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SGLS175 - AUGUST 2003 description (continued) If the design requires single operational amplifiers, see the TI TLV2211/21/31. This is a family of rail-to-rail output operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment. ORDERING INFORMATION TA -40C to 125C VIOmax AT 25C PACKAGE ORDERABLE PART NUMBER 950 V SOIC (D) Tape and reel TLV2422AQDRQ1 2.5 mV SOIC (D) Tape and reel TLV2422QDRQ1 TOP-SIDE MARKING 2422AQ 2422Q1 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VB2 IN+ IN- VB1 Q2 R1 Q1 Q23 Q22 Q4 Q3 R9 R2 Q5 Q7 Q6 VB3 R3 Q25 Q24 equivalent schematic (each amplifier) Q9 Q8 R4 Q27 Q26 Q12 Q11 VB4 Q10 C1 Q13 D1 Q30 Q29 Q14 VB3 Q17 Q16 Q15 Q33 Q32 Q31 Q19 R6 R5 Q18 R10 Q35 Q34 Q37 C3 C2 VB2 Q36 R8 Q21 Q20 R7 VB4 OUT VDD-/GND VDD+ Transistors Diodes Resistors Capacitors 69 5 26 6 COMPONENT COUNT 1 1 1 11 1 1 SGLS175 - AUGUST 2003 3 2 SGLS175 - AUGUST 2003 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDD Input voltage, VI (any input, see Note 1): C and I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to VDD Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Total current into VDD + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Total current out of VDD - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Duration of short-circuit current at (or below) 25C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: Q suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to 125C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VDD+ and VDD - . 2. Differential voltages are at IN+ with respect to IN -. Excessive current flows if input is brought below VDD - - 0.3 V. 3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE TA 25C 25 C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70 70C C POWER RATING TA = 85 85C C POWER RATING TA = 125 125C C POWER RATING D 725 mW 5.8 mW/C 464 mW 377 mW 145 mW recommended operating conditions MIN MAX Supply voltage, VDD 2.7 10 V Input voltage range, VI VDD - VDD - VDD + - 0.8 VDD + - 0.8 V Common-mode input voltage, VIC Operating free-air temperature, TA -40 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 UNIT V C 5 2 SGLS175 - AUGUST 2003 electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA TLV2422-Q1 MIN 25C VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current VOH VOL Common-mode input voltage range High-level output voltage Low-level output voltage 300 2000 VIC = 0, 0.003 0.003 V/mo 25C 0.5 VIC = 0, IOL = 250 A A 60 0.5 150 1 0 to 2.5 60 Full range 0 to 2.2 -0.25 to 2.75 1 300 0 to 2.5 2.97 25C 2.75 -0.25 to 2.75 V 2.75 0.05 25C 0.2 Full range 0.05 0.2 0.5 2 V 2.5 25C 6 pA 2.97 2.5 25C pA 60 0 to 2.2 25C Full range 60 150 300 25C Full range IOL = 100 A V V 25C RS = 50 IOH = - 500 A A 950 1800 UNIT V/C V/C Full range IOH = - 100 A 300 MAX 2 Full range |VIO| 5 mV, TYP 2 Full range VDD = 1.5 V, RS = 50 MIN 2500 25C VICR MAX Full range VIC = 0, VO = 0, TLV2422A-Q1 TYP 10 V 0.5 6 10 AVD Large-signal differential voltage amplification 25C 700 700 ri(d) Differential input resistance 25C 1012 1012 ri(c) Common-mode input resistance 25C 1012 1012 ci(c) Common-mode input capacitance f = 10 kHz 25C 8 8 pF zo Closed-loop output impedance f = 100 kHz, 25C 130 130 CMRR Common-mode rejection ratio VIC = VICR min, VO = 1.5 V, RS = 50 kSVR Supply-voltage rejection ratio (VDD/VIO) VDD = 2.7 V to 8 V, VIC = VDD /2, No load IDD Supply current VO = 1.5 V, RL = 10 k VIC = 1.5 V, VO = 1 V to 2 V RL = 1 M AV = 10 No load 25C 70 Full range 70 25C 80 Full range 80 2 83 70 V/mV 83 dB 70 95 80 95 dB 25C Full range 80 100 150 175 100 150 175 A Full range is - 40C to 125C for Q level part. Referenced to 1.5 V NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2 SGLS175 - AUGUST 2003 operating characteristics at specified free-air temperature, VDD = 3 V PARAMETER TEST CONDITIONS VO = 1.1 V to 1.9 V, CL = 100 pF SR Slew rate at unity gain Vn Equivalent input noise voltage VN(PP) Peak-to-peak equivalent input noise voltage In Equivalent input noise current THD + N ts m 25C 0.01 0.02 Full range 0.008 100 23 f = 0.1 Hz to 1 Hz 25C 2.7 f = 0.1 Hz to 10 Hz 25C 4 25C 0.6 AV = 1, CL = 100 pF Settling time AV = - 1, Step = 0.5 V to 2.5 V, RL = 10 k, CL = 100 pF RL = 10 k, POST OFFICE BOX 655303 UNIT MAX V/s 25C VO(PP) = 1 V, RL = 10 k, Gain margin Full range is - 40C to 125C for Q level part. Referenced to 1.5 V TYP 25C Maximum output-swing bandwidth Phase margin at unity gain MIN f = 1 kHz AV = 1 Total harmonic distortion plus noise TLV2422-Q1, TLV2422A-Q1 f = 10 Hz VO = 0.5 V to 2.5 V, f = 1 kHz, RL = 10 k f = 10 kHz, CL = 100 pF Gain-bandwidth product BOM RL = 10 k, TA nV/Hz V V fAHz 0.25% 25C AV = 10 RL = 10 k, 1.8% 25C 46 kHz 25C 8.3 kHz To 0.1% 8.6 ss 25C To 0.01% CL = 100 pF * DALLAS, TEXAS 75265 16 25C 62 25C 11 dB 7 2 SGLS175 - AUGUST 2003 electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA TLV2422-Q1 MIN 25C VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current VOH VOL Common-mode input voltage range High-level output voltage Low-level output voltage 300 2000 VIC = 2.5 V, 0.003 0.003 V/mo 25C 0.5 VIC = 2.5 V, IOL = 500 A A 60 0.5 150 1 0 to 4.5 60 Full range 0 to 4.2 -0.25 to 4.75 1 300 0 to 4.5 4.97 25C 4.75 -0.25 to 4.75 V 4.75 0.04 25C 0.15 Full range 0.04 0.15 0.5 3 V 4.5 25C 8 pA 4.97 4.5 25C pA 60 0 to 4.2 25C Full range 60 150 300 25C Full range IOL = 100 A V V 25C RS = 50 IOH = - 1 mA 950 1800 UNIT V/C V/C Full range IOH = - 100 A 300 MAX 2 Full range |VIO| 5 mV, TYP 2 Full range VDD = 2.5 V, RS = 50 MIN 2500 25C VICR MAX Full range VIC = 0, VO = 0, TLV2422A-Q1 TYP 12 V 0.5 8 12 AVD Large-signal differential voltage amplification 25C 1000 1000 ri(d) Differential input resistance 25C 1012 1012 ri(c) Common-mode input resistance 25C 1012 1012 ci(c) Common-mode input capacitance f = 10 kHz 25C 8 8 pF zo Closed-loop output impedance f = 100 kHz, 25C 130 130 CMRR Common-mode rejection ratio VIC = VICR min, VO = 2.5 V, RS = 50 kSVR Supply-voltage rejection ratio (VDD/VIO) VDD = 4.4 V to 8 V, VIC = VDD /2, No load IDD Supply current VO = 2.5 V, RL = 10 k VIC = 2.5 V, VO = 1 V to 4 V RL = 1 M AV = 10 No load 25C 70 Full range 70 25C 80 Full range 80 3 90 70 V/mV 90 dB 70 95 80 95 dB 25C Full range 80 100 150 175 100 150 175 A Full range is - 40C to 125C for Q level part. Referenced to 2.5 V NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2 SGLS175 - AUGUST 2003 operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER SR TEST CONDITIONS VO = 1.5 V to 3.5 V, CL = 100 pF Slew rate at unity gain Vn Equivalent input noise voltage VN(PP) Peak-to-peak equivalent input noise voltage In Equivalent input noise current THD + N Total harmonic distortion plus noise BOM ts m RL = 10 k, MIN TYP 25C 0.01 0.02 Full range 0.008 100 f = 1 kHz 25C 18 f = 0.1 Hz to 1 Hz 25C 1.9 f = 0.1 Hz to 10 Hz 25C 2.8 25C 0.6 Gain-bandwidth product f = 10 kHz, CL = 100 pF RL =10 k, Maximum output-swing bandwidth VO(PP) = 2 V, RL = 10 k, AV = 1, CL = 100 pF Settling time AV = - 1, Step = 1.5 V to 3.5 V, RL = 10 k, CL = 100 pF RL = 10 k, UNIT MAX V/s 25C AV = 1 Gain margin TLV2422-Q1, TLV2422A-Q1 f = 10 Hz VO = 1.5 V to 3.5 V, f = 1 kHz, RL = 10 k Phase margin at unity gain TA nV/Hz V V fAHz 0.24% 25C AV = 10 1.7% 25C 52 kHz 25C 5.3 kHz To 0.1% 8.5 ss 25C To 0.01% CL = 100 pF 15.5 25C 66 25C 11 dB Full range is - 40C to 125C for Q level part. Referenced to 2.5 V POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS Table of Graphs FIGURE VIO Input offset voltage Distribution vs Common-mode input voltage 2,3 4,5 VIO IIB/IIO Input offset voltage temperature coefficient Distribution 6,7 Input bias and input offset currents vs Free-air temperature VOH VOL High-level output voltage vs High-level output current 9,11 Low-level output voltage vs Low-level output current 10,12 VO(PP) Maximum peak-to-peak output voltage vs Frequency 13 IOS Short-circuit output current vs Supply voltage vs Free-air temperature 14 15 VID Differential input voltage vs Output voltage 16,17 Differential gain vs Load resistance 18 Large-signal differential voltage amplification AVD Differential voltage amplification vs Frequency vs Free-air temperature 19,20 21,22 zo Output impedance vs Frequency 23,24 CMRR Common-mode rejection ratio vs Frequency vs Free-air temperature 25 26 kSVR Supply-voltage rejection ratio vs Frequency vs Free-air temperature 27,28 29 IDD Supply current vs Supply voltage 30 SR Slew rate vs Load capacitance vs Free-air temperature 31 32 VO VO Inverting large-signal pulse response 33,34 Voltage-follower large-signal pulse response 35,36 VO VO Inverting small-signal pulse response 37,38 Voltage-follower small-signal pulse response 39,40 Vn Equivalent input noise voltage vs Frequency Noise voltage (referred to input) Over a 10-second period Total harmonic distortion plus noise vs Frequency Gain-bandwidth product vs Supply voltage vs Free-air temperature Phase margin vs Frequency vs Load capacitance 19,20 48 Gain margin vs Load capacitance 49 Unity-gain bandwidth vs Load capacitance 50 THD + N m B1 10 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 41, 42 43 44,45 46 47 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS DISTRIBUTION OF TLV2422 INPUT OFFSET VOLTAGE DISTRIBUTION OF TLV2422 INPUT OFFSET VOLTAGE 20 18 Percentage of Amplifiers - % 16 14 Percentage of Amplifiers - % 452 Amplifiers from 1 Wafer Lot VDD = 3 V RL = 10 k TA = 25C 12 10 8 6 4 454 Amplifiers from 1 Wafer Lot VDD = 5 V RL = 10 k TA = 25C 15 10 5 2 0 0 -0.4 -0.3 -0.2 -0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 -0.4 -0.3 -0.2 -0.1 0 VIO - Input Offset Voltage - mV Figure 2 Figure 3 INPUT OFFSET VOLTAGE vs COMMON-MODE INPUT VOLTAGE INPUT OFFSET VOLTAGE vs COMMON-MODE INPUT VOLTAGE 2 2 VDD = 3 V VDD = 5 V 1.5 VIO - Input Offset Voltage - mV VIO - Input Offset Voltage - mV 1.5 1 0.5 0 -0.5 -1 -1.5 -2 -0.5 0.1 0.2 0.3 0.4 0.5 0.6 VIO - Input Offset Voltage - mV 1 0.5 0 -0.5 -1 -1.5 0 0.5 1 1.5 2 2.5 3 VIC - Common-Mode Input Voltage - V -2 -0.5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 VIC - Common-Mode Input Voltage - V Figure 4 Figure 5 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 11 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS DISTRIBUTION OF TLV2422 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT DISTRIBUTION OF TLV2422 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT 25 32 Amplifiers From 1 Wafer Lot VDD = 1.5 V TA = 25C to 125C 20 15 10 5 0 -4 32 Amplifiers From 1 Wafer Lot VDD = 2.5 V TA = 25C to 125C 20 Percentage of Amplifiers - % Percentage of Amplifiers - % 25 2 3 -3 -2 -1 0 1 VIO - Temperature Coefficient - V / C 15 10 5 0 4 -4 2 3 -3 -2 -1 0 1 VIO - Temperature Coefficient - V / C Figure 7 HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT INPUT BIAS AND INPUT OFFSET CURRENTS vs FREE-AIR TEMPERATURE 3 200 VDD = 2.5 V VDD = 3 V VOH - High-Level Output Voltage - V I IB and I IO - Input Bias and Input Offset Currents - pA Figure 6 160 120 IIB 80 40 2.5 TA = 85C 2 TA = 0C 1.5 TA = 125C 1 TA = 25C 0.5 IIO 0 -55 0 -40 0 25 70 85 125 TA - Free-Air Temperature - C 0 3 6 Figure 9 POST OFFICE BOX 655303 9 12 IOH - High-Level Output Current - mA Figure 8 12 4 * DALLAS, TEXAS 75265 15 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 1.6 5 VDD = 3 V VDD = 5 V VOH - High-Level Output Voltage - V VOL - Low-Level Output Voltage - V 1.4 1.2 TA = 125C 1 TA = 85C 0.8 0.6 0.4 TA = 25C 0.2 TA = -40C 4 TA = 25C 3 2 TA = 85C 1 TA = 125C TA = -40C 0 0 1 2 3 4 0 5 0 IOL - Low-Level Output Current - mA 4 12 8 Figure 10 1 TA = 125C 0.8 TA = 85C 0.4 TA = 25C TA = -40C 0 1 2 3 4 5 VO(PP) - Maximum Peak-to-Peak Output Voltage - V VOH - High-Level Output Voltage - V VDD = 5 V 0 24 28 32 36 40 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY 1.2 0.2 20 Figure 11 LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 0.6 16 IOH - High-Level Output Current - mA 5 RL = 10 k TA = 25C VDD = 5 V 4 3 VDD = 3 V 2 1 0 102 IOL - Low-Level Output Current - mA 103 104 105 106 f - Frequency - Hz Figure 12 Figure 13 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 13 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE 8 30 VO = VDD/2 VIC = VDD/2 TA = 25C 20 VID = -100 mV I OS - Short-Circuit Output Current - mA I OS - Short-Circuit Output Current - mA 25 15 10 5 0 -5 -10 -15 -20 -25 -30 2 3 4 5 6 7 8 9 6 4 2 VDD = 5 V 0 -2 -4 -6 VID = 100 mV -8 -55 10 -40 Figure 14 125 1000 VDD = 3 V RL = 10 k TA = 25C 800 VID - Differential Input Voltage - V VID - Differential Input Voltage - V 85 DIFFERENTIAL INPUT VOLTAGE vs OUTPUT VOLTAGE 1000 600 400 200 0 -200 -400 -600 -800 600 VDD = 5 V RL = 10 k TA = 25C 400 200 0 -200 -400 -600 -800 -1000 0 0.5 1 1.5 2 2.5 3 -1000 0 VO - Output Voltage - V 1 2 Figure 17 POST OFFICE BOX 655303 3 VO - Output Voltage - V Figure 16 14 70 Figure 15 DIFFERENTIAL INPUT VOLTAGE vs OUTPUT VOLTAGE 800 25 0 TA - Free-Air Temperature - C VDD - Supply Voltage - V * DALLAS, TEXAS 75265 4 5 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS DIFFERENTIAL GAIN vs LOAD RESISTANCE 10000 Differential Gain - V/mV 1000 VID = 5 V VID = 3 V 100 10 1 10 100 1000 RL - Load Resistance - k Figure 18 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE MARGIN vs FREQUENCY 50 30 180 VDD = 3 V RL = 10 k CL = 100 pF 135 20 PHASE 90 10 45 0 GAIN -10 0 -20 -30 m - Phase Margin - 40 AVD - Large-Signal Differential Voltage Amplification - dB 2 -45 -40 -50 103 104 105 -90 106 f - Frequency - Hz Figure 19 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 15 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE MARGIN vs FREQUENCY 60 180 VDD = 5 V RL = 10 k CL = 100 pF AVD - Large-Signal Differential Voltage Amplification - dB 40 135 PHASE 30 90 20 45 10 0 GAIN -10 0 -20 m - Phase Margin - 50 -45 -30 -40 103 104 -90 106 105 f - Frequency - Hz Figure 20 DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE 10000 VDD = 3 V AVD - Differential Voltage Amplication - V/mV AVD - Differential Voltage Amplication - V/mV 10000 RL = 1 M 1000 100 RL = 10 k 10 1 -75 -50 -25 0 25 50 75 100 125 VDD = 5 V RL = 1 M 1000 100 RL = 10 k 10 1 -75 -50 TA - Free-Air Temperature - C 0 25 Figure 22 POST OFFICE BOX 655303 50 75 TA - Free-Air Temperature - C Figure 21 16 -25 * DALLAS, TEXAS 75265 100 125 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS OUTPUT IMPEDANCE vs FREQUENCY OUTPUT IMPEDANCE vs FREQUENCY 1000 1000 AV = 100 AV = 10 z o - Output Impedance - z o - Output Impedance - AV = 100 100 AV = 1 10 AV = 10 100 AV = 1 10 VDD = 3 V TA = 25C VDD = 5 V TA = 25C 1 102 103 1 102 105 104 103 f - Frequency - Hz Figure 23 Figure 24 COMMON-MODE REJECTION RATIO vs FREQUENCY COMMON-MODE REJECTION RATIO vs FREE-AIR TEMPERATURE 94 TA = 25C CMRR - Common-Mode Rejection Ratio - dB CMRR - Common-Mode Rejection Ratio - dB 100 80 60 VDD = 5 V 40 VDD = 3 V 20 0 102 105 104 f - Frequency - Hz 103 104 105 106 f - Frequency - Hz 93 92 VDD = 5 V 91 90 VDD = 3 V 89 88 87 86 85 84 -55 -40 0 25 70 85 125 TA - Free-Air Temperature - C Figure 25 Figure 26 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 17 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS SUPPLY-VOLTAGE REJECTION RATIO vs FREQUENCY SUPPLY-VOLTAGE REJECTION RATIO vs FREQUENCY 120 VDD = 3 V TA = 25C KSVR - Supply-Voltage Rejection Ratio - dB KSVR - Supply-Voltage Rejection Ratio - dB 120 100 KSVR+ 80 60 KSVR- 40 20 0 101 103 102 104 105 VDD = 5 V TA = 25C 100 KSVR+ 80 60 KSVR- 40 20 0 101 106 103 102 f - Frequency - Hz Figure 27 106 SUPPLY CURRENT vs SUPPLY VOLTAGE 100 160 VDD = 2.7 V to 8 V VO = VDD/2 No Load 140 TA = -40C 98 I DD - Supply Current - A k SVR - Supply-Voltage Rejection Ratio - dB 105 Figure 28 SUPPLY-VOLTAGE REJECTION RATIO vs FREE-AIR TEMPERATURE 96 94 TA = 25C 120 100 TA = 85C 80 60 40 92 20 90 -55 -40 0 25 70 85 125 0 0 1 TA - Free-Air Temperature - C 2 3 4 5 6 Figure 30 POST OFFICE BOX 655303 7 VDD - Supply Voltage - V Figure 29 18 104 f - Frequency - Hz * DALLAS, TEXAS 75265 8 9 10 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS SLEW RATE vs LOAD CAPACITANCE SLEW RATE vs FREE-AIR TEMPERATURE 0.03 0.025 30 VDD = 3 V AV = -1 TA = 25C SR - Slew Rate - V/ms SR - Slew Rate - V/s 25 SR- 0.02 SR+ 0.015 0.01 20 15 10 0.005 0 102 VDD = 5 V RL = 10 k CL = 100 pF AV = 1 104 103 105 5 -55 106 CL - Load Capacitance - pF -40 0 Figure 31 1500 3 1000 2 VO - Output Voltage - mV VO - Output Voltage - mV 4 500 0 -500 -2000 -1000 VDD = 3 V RL = 10 k CL = 100 pF AV = -1 TA = 25C -600 0 125 1 0 -1 -2 -3 -200 85 INVERTING LARGE-SIGNAL PULSE RESPONSE 2000 -1500 70 Figure 32 INVERTING LARGE-SIGNAL PULSE RESPONSE -1000 25 TA - Free-Air Temperature - C 200 600 1000 -4 -1000 VDD = 5 V RL = 10 k CL = 100 pF AV = -1 TA = 25C -600 t - Time - s -200 0 200 600 1000 t - Time - s Figure 34 Figure 33 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 19 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 2000 1000 1500 VO - Output Voltage - mV VO - Output Voltage - mV 1500 2000 VDD = 3 V RL = 10 k CL = 100 pF AV = 1 TA = 25C 500 0 -500 -1000 -1500 1000 500 0 -500 -1000 -1500 -2000 -1000 -600 -200 0 200 600 VDD = 5 V RL = 10 k CL = 100 pF AV = 1 TA = 25C -2000 -1000 1000 -600 -200 t - Time - s INVERTING SMALL-SIGNAL PULSE RESPONSE VO - Output Voltage - mV VO - Output Voltage - mV 300 0 -100 -200 -300 200 VDD = 5 V RL = 10 k CL = 100 pF AV = -1 TA = 25C 100 0 -100 -200 -300 -4 -3 -2 -1 0 1 2 3 4 5 -400 -5 -4 t - Time - s -3 -2 -1 0 1 t - Time - s Figure 38 Figure 37 20 1000 400 VDD = 3 V RL = 10 k CL = 100 pF AV = -1 TA = 25C 100 -400 -5 600 INVERTING SMALL-SIGNAL PULSE RESPONSE 400 200 200 Figure 36 Figure 35 300 0 t - Time - s POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2 3 4 5 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE 400 200 300 VO - Output Voltage - mV VO - Output Voltage - mV 300 400 VDD = 3 V RL = 10 k CL = 100 pF AV = 1 TA = 25C 100 0 -100 -200 -300 -400 -5 200 VDD = 5 V RL = 10 k CL = 100 pF AV = 1 TA = 25C 100 0 -100 -200 -300 -4 -3 -2 -1 0 1 2 3 4 -400 -5 5 -4 -3 -2 t - Time - s 0 1 2 3 4 5 t - Time - s Figure 40 Figure 39 EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 120 120 VDD = 3 V TA = 25C Vn - Equivalent Input Noise Voltage - nV/ Hz Vn - Equivalent Input Noise Voltage - nV/ Hz -1 100 80 60 40 20 0 10 102 103 104 VDD = 5 V TA = 25C 100 80 60 40 20 0 10 f - Frequency - Hz 102 103 104 f - Frequency - Hz Figure 41 Figure 42 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 21 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS NOISE VOLTAGE OVER A 10-SECOND PERIOD 1000 Over a 10 Second Period 800 600 VDD = 5 V f = 0.1 Hz to 10 Hz TA = 25C Noise Voltage - nV 400 200 0 -200 -400 -600 -800 -1000 -1200 0 1 2 3 4 5 6 8 7 10 9 t - Time - s Figure 43 22 100 VDD = 3 V RL = 10 k TA = 25C 10 1 AV = 10 AV = 1 0.1 0.01 101 102 103 TOTAL HARMONIC DISTORTION PLUS NOISE vs FREQUENCY THD +N - Total Harmonic Distortion Plus Noise - % THD +N - Total Harmonic Distortion Plus Noise - % TOTAL HARMONIC DISTORTION PLUS NOISE vs FREQUENCY 104 105 100 VDD = 5 V RL = 10 k TA = 25C 10 1 AV = 10 AV = 1 0.1 0.01 0.001 101 102 103 f - Frequency - Hz f - Frequency - Hz Figure 44 Figure 45 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 104 105 2 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS GAIN-BANDWIDTH PRODUCT vs SUPPLY VOLTAGE GAIN-BANDWIDTH PRODUCT vs FREE-AIR TEMPERATURE 80 80 RL = 10 k CL = 100 pF f = 10 kHz TA = 25C Gain-Bandwidth Product - kHz Gain-Bandwidth Product - kHz 70 VDD = 5 V RL = 10 k CL = 100 pF f = 10 kHz 70 60 50 40 30 60 50 40 30 20 10 20 3 5 4 6 7 0 -50 8 VDD - Supply Voltage - V 0 -25 25 50 Figure 46 125 Figure 47 PHASE MARGIN vs LOAD CAPACITANCE GAIN MARGIN vs LOAD CAPACITANCE 120 40 RL = 10 k TA = 25C Rnull = 500 100 RL = 10 k TA = 25C Rnull = 500 Rnull = 1000 30 80 Gain Margin - dB m - Phase Margin - 100 75 TA - Free-Air Temperature - C 60 40 Rnull = 1000 Rnull = 200 20 Rnull = 100 Rnull = 200 10 Rnull = 100 20 Rnull = 0 Rnull = 0 0 10 102 103 104 105 0 10 CL - Load Capacitance - pF 102 103 104 105 CL - Load Capacitance - pF Figure 48 Figure 49 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 23 SGLS175 - AUGUST 2003 TYPICAL CHARACTERISTICS UNITY-GAIN BANDWIDTH vs LOAD CAPACITANCE B1 - Unity-Gain Bandwidth - kHz 60 50 40 30 20 10 0 10 102 103 104 CL - Load Capacitance - pF Figure 50 24 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 105 2 PACKAGE OPTION ADDENDUM www.ti.com 25-Feb-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TLV2422AQDRQ1 ACTIVE SOIC D 8 2500 TLV2422QDRQ1 ACTIVE SOIC D 8 2500 Lead/Ball Finish MSL Peak Temp (3) Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight. (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated