HDSP-740x Series, HDSP-750x Series, HDSP-780x Series, HDSP-A15x Series, HDSP-A40x Series 7.6 mm (0.3 inch) Micro Bright Seven Segment Displays Data Sheet Description Features The 7.6 mm (0.3 inch) LED seven segment displays are designed for viewing distances up to 3 meters (10 feet). These devices use an industry standard size package and pinout. Both the numeric and 1. overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode. * Compact package - 0.300 x 0.500 inches - Leads on 2.54 mm (0.1 inch) centers * Choice of colors - AlGaAs Red, High Efficiency Red, Yellow, Green, Orange * Excellent appearance - Evenly lighted segments - Mitered corners on segments - Surface color gives optimum contrast - 50 viewing angle * Design flexibility - Common anode or common cathode - Right hand decimal point - 1. Overflow Character * Categorized for luminous intensity - Yellow and Green categorized for color - Use of like categories yields a uniform display * High light output * High peak current * Excellent for long digit string multiplexing * Intensity and color selection available - See Intensity and Color Selected Displays Data Sheet * Sunlight viewable AlGaAs These displays are ideal for most applications. Pin-forpin equivalent displays are also available in a low current design. The low current displays are ideal for portable applica tions. For additional information see the Low Current Seven Segment Displays. Devices Package Drawing Orange AlGaAs [1] HER [1] Yellow [1] Green [1] HDSP-A401 HDSP-A151 HDSP-7501 HDSP-7401 HDSP-7801 Common Anode Right Hand Decimal A HDSP-A403 HDSP-A153 HDSP-7503 HDSP-7403 HDSP-7803 Common Cathode Right Hand Decimal C HDSP-7507 HDSP-7807 CommonAnode 1. Overflow E HDSP-7508 HDSP-7808 Common Cathode 1. Overflow F Description Note: 1. These displays are recommended for high ambient light operation. For low current operation, refer to the HDSP-A10X AlGaAs, HDSP-335X HER, HDSP-A80X Yellow, and HDSP-A90X Green data sheet. Part Numbering System 5082 - X XX X - X X X XX HDSP - X XX X - X X X XX Mechanical Option [1] 00: No Mechanical Option Color Bin Options [1, 2] 0: No Color Bin Limitation 3: Color Bins 3- and 3+ only (applicable for Yellow devices only) Z: Color Bins 2- and 3+ only (applicable for Yellow devices only) Maximum Intensity Bin [1, 2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1, 2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color [1] 1: Common Anode 2: Common Anode 3: Common Cathode 4: Common Cathode Device Specific Configuration [1] Refer to Respective Datasheet Package [1] A: 7.6 mm (0.3 inch) Single Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Refer to respective datasheet for specific bin limit information. 2 Package Dimensions Notes: 1. All dimensions in millimeters (inches). 2. All untoleranced dimensions are for reference only. 3. Redundant anodes. 4. Redundant cathodes. 5. For HDSP-7400/7800 series product only. Internal Circuit Diagram 3 FUNCTION Pin A 1 2 3 4 5 6 7 8 9 10 ANODE[3] CATHODE f CATHODE g CATHODE e CATHODE d ANODE[3] CATHODE DP CATHODE c CATHODE b CATHODE a C CATHODE[4] ANODE f ANODE g ANODE e ANODE d CATHODE[4] CATHODE DP CATHODE c CATHODE b CATHODE a E ANODE[3] CATHODE PLUS CATHODE MINUS NC NC ANODE[3] CATHODE DP CATHODE c CATHODE b NC F CATHODE[5] ANODE PLUS ANODE MINUS NC NC CATHODE[4] ANODE DP ANODE c ANODE b NC Absolute Maximum Ratings Description AlGaAs Red HDSP-A150 Series HER/Orange HDSP-7500/ -A40X Series Yellow HDSP-7400 Series Green HDSP-7800 Series Units Average Power per Segment or DP 96 105 80 105 mW Peak Forward Current per Segment or DP 160[1] 90[3] 60[5] 90[7] mA DC Forward Current per Segment or DP 40[2] 30[4] 20[6] 30[8] mA Operating Temperature Range -20 to +100[9] -40 to +100 Storage Temperature Range C -55 to +100 C Reverse Voltage* per segment or DP 3.0 V Wave Soldering Temperature for 3 Seconds (1.59mm [0.063 in.] below Body) 250 C * reverse voltage is for LED testing purposes and is not recommended to be used as an application condition. Notes: 1. See Figure 1 to establish pulsed conditions. 2. Derate above 46C at 0.54 mA/C. 3. See Figure 6 to establish pulsed conditions. 4. Derate above 53C at 0.45 mA/C. 5. See Figure 7 to establish pulsed conditions. 6. Derate above 81C at 0.52 mA/C. 7. See Figure 8 to establish pulsed conditions. 8. Derate above 39C at 0.37 mA/C. 9. For operation below -20C, contact your local Avago components sales office or an authorized distributor. Electrical/Optical Characteristics at TA = 25C AlGaAs Red Device Series - HDSP-A15x Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2,5] (Digit Average) IV 6.9 Forward Voltage/Segment or DP VF Units Test Conditions 14.0 mcd IF = 20 mA 1.8 V IF = 20 mA V IF = 100 mA 2.0 Peak Wavelength PEAK Dominant Wavelength[3] d Reverse Voltage/Segment or DP[4] VR Temperature Coefficient of VF/Segment or DP Thermal Resistance LED Junction-to-Pin Max. 3.0 645 nm 637 nm 15.0 V VF/C -2 mV/C RJ-PIN 255 C/W/Seg 3.0 IR = 100 A High Efficiency Red Device Series - HDSP-750x Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2,6] IV 360 980 Forward Voltage/Segment or DP VF 2.0 Peak Wavelength PEAK 635 nm Dominant Wavelength[3] d 626 nm Reverse Voltage/Segment or DP[4] VR 30 V Temperature Coefficient of VF/Segment or DP VF/C -2 mV/C Thermal Resistance LED Junction-to-Pin RJ-PIN 200 C/W/Seg (Digit Average) 4 Max. Units Test Conditions cd IF = 5 mA 5390 3.0 IF = 20 mA 2.5 V IF = 20 mA IR = 100 A Orange Device Series - HDSP-A40x Parameter Symbol Luminous Intensity/Segment[1,2,6] (Digit Average) IV Min. 0.70 Forward Voltage/Segment or DP VF 2.0 Peak Wavelength PEAK 600 nm Dominant Wavelength[3] d 603 nm Reverse Voltage/Segment or DP[4] VR 30 V Temperature Coefficient of VF/Segment or DP VF/C -2 mV/C Thermal Resistance LED Junction-to-Pin RJ-PIN 200 C/W/Seg 3.0 Typ. Max. 2.5 Units Test Conditions mcd IF = 5 mA V IF = 20 mA IR = 100 A Yellow Device Series - HDSP-740x Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2,7] IV 225 980 Forward Voltage/Segment or DP VF 2.2 Peak Wavelength PEAK 583 Dominant Wavelength[3,9] d 581.5 586 Reverse Voltage/Segment or DP[4] VR 3.0 50.0 V Temperature Coefficient of VF/Segment or DP VF/C -2 mV/C Thermal Resistance LED Junction-to-Pin RJ-PIN 200 C/W/Seg (Digit Average) Max. Units Test Conditions cd IF = 5 mA 5390 IF = 20 mA 2.5 V IF = 20 mA nm 592.5 nm IR = 100 A High Performance Green Device Series - HDSP-780x Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2,8] (Digit Average) IV 860 3000 Max. Units Test Conditions cd IF = 10 mA Forward Voltage/Segment or DP VF 2.1 Peak Wavelength PEAK 566 Dominant Wavelength[3,9] d 571 Reverse Voltage/Segment or DP[4] VR 50.0 V Temperature Coefficient of VF/Segment or DP VF/C -2 mV/C Thermal Resistance LED Junction-to-Pin RJ-PIN 200 C/W/Seg 6800 3.0 IF = 20 mA 2.5 V IF = 20 mA nm 577 nm IR = 100 A Notes: 1. Case temperature of device immediately prior to the intensity measurement is 25C. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. For low current operation the AlGaAs HDSP-A101 series displays are recommended. 6. For low current operation the HER HDSP-7511 series displays are recommended. 7. For low current operation the Yellow HDSP-A801 series displays are recommended. 8. For low current operation the Green HDSP-A901 series displays are recommended. 9. The yellow (HDSP-7400) and Green (HDSP-7800) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. 5 100 OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF I DC MAXIMUM 10 z 0H 10 z Hz 100 0H 30 Hz 10 1K 1 3K 1 Z KH 10 I F PEAK RATIO OF MAXIMUM OPERATING I DC MAX PEAK CURRENT TO TEMPERATURE DERATED MAXIMUM DC CURRENT AlGaAs Red 1000 10000 DC OPERATION t P - PULSE DURATION - s IDC MAX. - MAXIMUM DC CURRENT PER SEGMENT - mA 50 RJ-A = 770C/W 45 AlGaAs RED 40 35 30 25 20 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 IF - FORWARD CURRENT PER SEGMENT - mA Figure 1. Maximum Allowed Peak Current vs. Pulse Duration - AlGaAs Red. 160 140 120 AlGaAs RED 100 80 60 40 20 0 0 TA - AMBIENT TEMPERATURE - C AlGaAs RED 1.25 1.00 0.75 0.50 0.25 0 0 5 10 15 20 25 30 35 40 IF - FORWARD CURRENT PER SEGMENT - mA Figure 4. Relative Luminous Intensity vs. DC Forward Current. 6 1.5 2.0 2.5 3.0 3.5 4.0 Figure 3. Forward Current vs. Forward Voltage. PEAK - NORMALIZED RELATIVE EFFICIENCY RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) 2.00 1.50 1.0 VF - FORWARD CURRENT - V Figure 2. Maximum Allowable DC Current per Segment as a Function of Ambient Temperature. 1.75 0.5 1.4 1.2 1.0 0.8 0.6 0.5 AlGaAs RED 5.0 50.0 150.0 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF I DC MAXIMUM 10 IDC MAX - MAXIMUM DC CURRENT PER SEGMENT - mA 35 30 25 z RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 5 mA FOR HER AND )t (YELLOW AND TO 1 AT 10 mA FOR GREEN) IF - FORWARD CURRENT PER SEGMENT - mA YELLOW HER / ORANGE GREEN 1.0 2.0 3.0 4.0 5.0 VF - FORWARD VOLTAGE - V Figure 10. Forward Current vs. Forward Voltage Characteristics. 7 HER, ORANGE GREEN 20 YELLOW 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 TA - AMBIENT TEMPERATURE - C 80 0 DC OPERATION z H H z Z 10000 100 0 10000 40 Figure 9. Maximum Allowable DC Current per Segment as a Function of Ambient Temperature. 12 10 HER / ORANGE 8 YELLOW 6 4 GREEN 2 0 0 5 10 15 20 25 30 IF - FORWARD CURRENT PER SEGMENT - mA Figure 11. Relative Luminous Intensity vs. DC Forward Current. PEAK - RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 5 mA FOR HER, ORANGE AND YELLOW, AND 10 mA FOR GREEN) I F PEAK RATIO OF MAXIMUM OPERATING I DC MAX PEAK CURRENT TO TEMPERATURE DERATED DC CURRENT 0 10 0 z H K H H K K 30 1 3 10 1000 DC OPERATION Figure 8. Allowable Peak Current vs. Pulse Duration - Green. 20 1000 R = 770C/W J-A 45 t P - PULSE DURATION - s 40 Z H 0 10 Hz 0 30 50 10 60 100 Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration - Yellow. OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF I DC MAXIMUM 100 z 100 10 z 10 t P - PULSE DURATION - s Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration - HER, Orange. 1 H 1 t P - PULSE DURATION - s 1 K 1 1 DC OPERATION z 10000 H 1000 H z K H 10 K Hz 100 0 OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF I DC MAXIMUM 0 0 30 Hz 10 Hz Z KH 1 1K 3K 10 1 10 100 3 I F PEAK RATIO OF MAXIMUM OPERATING I DC MAX PEAK CURRENT TO TEMPERATURE DERATED DC CURRENT 100 10 I F PEAK RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE I DC MAX DERATED DC CURRENT HER, Yellow, Green, Orange 1.8 YELLOW 1.6 HER / ORANGE 1.4 GREEN 1.2 1.0 0.8 0 20 40 60 80 100 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 12. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. Intensity Bin Limits (mcd) AlGaAs Red Yellow HDSP-A15x HDSP-740x IV Bin Category Min. Max. IV Bin Category Min. Max. M 7.07 13.00 B 0.229 0.387 N 10.60 19.40 C 0.317 0.582 O 15.90 29.20 D 0.476 0.872 P 23.90 43.80 E 0.714 1.311 Q 35.80 65.60 F 1.073 1.967 G 1.609 2.950 H 2.413 4.425 HER HDSP-750x Green IV Bin Category Min. Max. B 0.342 0.630 HDSP-780x C 0.516 0.946 IV Bin Category Min. Max. D 0.774 1.418 H 0.86 1.58 E 1.160 2.127 I 1.29 2.37 F 1.740 3.190 J 1.94 3.55 G 2.610 4.785 K 2.90 5.33 H 3.915 7.177 L 4.37 8.01 IV Bin Category Min. Max. A 0.284 0.433 B 0.354 0.541 C 0.443 0.677 D 0.554 0.846 E 0.692 1.057 F 0.856 1.322 G 1.082 1.652 H 1.352 2.066 I 1.692 2.581 J 2.114 3.227 K 2.641 4.034 L 3.300 5.042 M 4.127 6.303 N 5.157 7.878 Orange HDSP-A40x 8 Contrast Enhancement Color Categories Dominant Wavelength (nm) Color Bin Min. Max. Yellow 1 581.50 585.00 3 584.00 587.50 2 586.50 590.00 4 589.00 592.50 2 573.00 577.00 3 570.00 574.00 4 567.00 571.00 5 564.00 568.00 Green Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representatives for further clarification/information. For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2015 Avago Technologies. All rights reserved. Obsoletes 5988-4434EN AV02-2553EN - October 9, 2015