851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 10 851 Series Applications Description Former connector for military applications. Now used in the fields of professional and general electronics. * Bayonet coupling * Environmental and hermetic versions * Solder, crimp, straight spills and wire wrap versions * Thermocouple contacts available * Cadmium free plating (Zinc Cobalt) version Standards MIL-C 26482 G Series 1 NFC 93422-He 301 B VG 95328 GAM T1 list QPL approved (solder version) Characteristics * Mechanical endurance : 500 cycles (full mating-unmating) * Contact resistance : - environmental version : size 20 4 m size 16 3 m - hermetic version : size 20 30 m size 16 14 m * Shielding 70 dB to 5 MHz 40 dB to 100 MHz Electrical Climatic * Dielectric withstanding voltage : * at standard pressure : mated and unmated connectors - 1 500 Vrms between size 20 contacts (service 1) - 2 300 Vrms between size 16 contacts (service 2) - 1 500 Vrms between mixed size 20 and 16 contacts (service 1) * at reduced pressure (10 mbar) : connectors mated and unmated - 200 Vrms between size 20 contacts (service 1) - 300 Vrms between size 16 contacts (service 2) * Insulation resistance : 5 000 M under 500 Vdc * Current rating per contact : size 20 : 7.5 A size 16 : 13 A * Working temperature : -55C to +125C * Sealing : - crimp contact version, 1 bar differential pressure, leakage 8 cm3/hr - solder contact version, 2 bar differential pressure, leakage 16 cm3/hr * Hermiticity : 1 bar differential pressure leakage 2,8 mm3/hr * Chemical resistance : - to MIL-C 26482 G Series 1 and - NFC 93422-HE 301 B code A * Resistance to salt spray : 48 hours at environmental temperature * Damp heat : 21 days * Vibration : to NFC 20-616 contact size 20 (O 1 mm) 16 (O 1.6 mm) Mechanical * Shell : * environmental version : aluminum alloy plating - olive green cadmium - black anodized - white cadmium - satin finish bright nickel - zinc cobalt (olive green) * hermetic version : steel plating : - iridescent yellow cadmium, nickel * Insulator : - front section : neoprene elastomer (85 shore) - rear section : neoprene elastomer (40 shore) * Contact : - crimp : inserted and removed from rear of insulator retained by metallic clip ; solder and straight spills : non removable ; wire wrap : removable or not removable - material : copper alloy - plating : gold overall or gold plated active zone and tin/lead plated termination - min retention force of contacts in insulator solder straight spill ww 68 N 113 N crimp 68 N 113 N Ordering information - Environmental connectors solder version crimp version basic series 851 - 00 E 851 - 00 R 8 - 3A 8 - 3A P P * * 50 50 shell type solder 00 01 02E 07 07A 06 08 36 76 crimp 00 01 02R 07 06 08 36 76 - square flange receptacle accepting backshells cable connecting receptacle square flange receptacle not accepting backshells jam nut receptacle accepting backshells jam nut receptacle not accepting backshells plug for use with straight backshells plug for use with 90 backshells screened plug for use with straight backshells screened plug with lock finger backshell type see table next page shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 contact layout see table p 14 contact type orientation P = male - S = female normal (not included in part number) w, x, y, z, see table p 15 obligatory suffix B crimped version without clip which used layouts 8-2 / 8-3 / 8-4 / 12-14 50 - Crimp contacts: gold, plated, all sizes - Solder contacts: size 20, contacts with gold plated active zone + tin plated termination area. Except layouts 8-2,8-3,12-14 size 16, gold plated contact all over / Mix size 20 + size 16, gold plated contacts all over 51 solder contacts gold plated size 20 & size 16 52 zinc cobalt olive green plated (contacts : idem specif. 50) 54 black zinc nickel plating (contacts: idem specif. 50 / black zinc cobalt backshell (contacts idem specif. 50) specification 10 29 031 44 38 42 Q7 R3 66 G4 olive green cadmium plate (without specification) black anodized (solder contacts) black anodized (crimp contacts) nickel plate nickel plate backshell for screen termination, type T* and RT* olive green cadmium plate olive green cadmium plate, salt spray 500 hr - for crimp and solder contacts olive green cadmium plate, salt spray 500 hr - for straight spills contacts crimp version: delivered without backshell, nor conical ring / Solder version idem crimp version + no grommet crimp version: nickel plating, delivered without backshell, nor conical ring / Solder version idem crimp version + no grommet } 1 *** *** 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 11 851 Series Backshell type backshell E R EC RC EC RC AC solder version shells solder crimp crimp version 00 01 07 06 08 36 76 00 01 07 06 08 36 76 backnut * * * * - - - * * * * - - - straight cable clamp * * * * - - - * * * * - - - 90 cable clamp - - - - * - - - - - - * - - straight cable clamp without grommet * * * * - - - - - - - - - - P RP straight backshell for potting * * * * - - - * * * * - - - A RA straight adapter * * - * - * - * * - * - * - T RT straight backshell for heatshrink sleeving * * * * - - - * * * * - - - M RM straight removable backshell for heatshrink sleeving * * - * - - - * * - * - - - *T *RT straight removable backshell for screen termination and heatshrink sleeving (for specifications 38 & 42) * * * - - * - * * * - - * - G RG straight removable backshell for screen termination and heatshrink sleeving * * * - - * - * * * - - * - straight backshell with sealing gland * * - * - - - - - - - - - - straight backshell with sealing gland and cable clamp * * - * - - - - - - - - - - J JC U RU short backshell for screen termination and heatshrink sleeving - - - - - - * - - - - - - * Z RZ straight adapter for electrical pitch access - - - * - - - - - - * - - - Hermetic connectors 851 -02H 8 basic series -3A P * 50 ** shell type 02H - square flange receptable 07H - jam nut receptable IH - solder fixing receptable shell size contact layout 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 see table p 14 contact type P = male only orientation normal (not included in part number) w, x, y, z, see table p 15 obligatory suffix 50 - gold plating for size 20 and size 16 contacts specification - 02H and 07H, yellow cadmium plating. IH, nickel (without specification) 44 - 02H and 07H, nickel 11 2 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 12 851 Series Straight spills and wire wrap connectors 851 -02E 8 basic series -3A P * 50 shell type 02E - square flange receptable not accepting backshell 07A - jam nut receptable not accepting backshell shell size contact layout 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 contact type P = male - S = female orientation normal (not included in part number) w, x, y, z, see table p 15 see table p 14 obligatory suffix 50 - solder contacts: size 20, contacts gold plated active zone + tin plated termination area. Except layouts 8-2,8-3,12-14 / size 16, gold plated contacts all over / Mix size 20 + size 16, gold plated contacts all over 51 - gold plating for straight spill contacts size 20 52 - zinc cobalt olive green plated (contacts : idem specif. 50) 54 - black zinc nickel plating (contacts: idem specif. 50) / black zinc cobalt backshell (contacts: idem specif. 50) obligatory specification 16 olive green cadmium plated body - O 1 mm contact, O 0,6 mm terminal - O 1,6 mm contact, O 1 mm terminal nickel plating - O 1 mm contact, O 0,6 mm terminal - O 1,6 mm contact, O 1 mm terminal non-bonded contacts, olive green cadmium plated shell bonded contacts, olive green cadmium plated shell straight spill 45 34 34A wire wrap Cross reference list 851 version with crimp contacts (olive green cadmium plating) connectors with backshells NFC 93422 (HE 301 B) Souriau 851 00 R 851 00 RC 851 00 RP 851 00 RG 851 00 RA 851 01 R 851 01 RC 851 01 RP 851 01 RA 851 02 R 851 06 R 851 06 RC 851 06 RP 851 06 RT 851 06 RA 851 36 RG 851 36 RA 851 07 R 851 07 RC 851 07 RP 851 07 RT 851 07 RG 851 76 RU 851 08 RC 851 08 RP .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. MIL-C 26482 G Series I HE 301 B 00 R .. .. .. 1A HE 301 B 00 RC .. .. .. 1A HE 301 B 00 RP .. .. .. 1A * MS 3120 E .. .. .. * MS 3120 F .. .. .. * MS 3120 P .. .. .. VG 95328 VG 95328 A .. .. .. VG 95328 B .. .. .. VG 95328 R .. .. .. HE 301 B 00 RA HE 301 B 01 R HE 301 B 01 RC HE 301 B 01 RP HE 301 B 01 RA HE 301 B 02 R HE 301 B 06 R HE 301 B 06 RC HE 301 B 06 RP .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1A 1A 1A 1A 1A 1A 1A 1A 1A * MS 3121 E .. .. .. * MS 3121 F .. .. .. * MS 3121 P .. .. .. * MS 3122 E * MS 3126 E * MS 3126 F * MS 3126 P .. .. .. .. .. .. .. .. .. .. .. .. VG 95328 C .. .. .. VG 95328 K .. .. .. VG 95328 J .. .. .. HE 301 B 06 RA .. .. .. 1A HE 301 B 07 R .. .. .. 1A HE 301 B 07 RC .. .. .. 1A HE 301 B 07 RP .. .. .. 1A * MS 3124 E .. .. .. * MS 3124 F .. .. .. * MS 3124 P .. .. .. VG 95328 M VG 95328 N VG 95328 D VG 95328 E .. .. .. .. .. .. .. .. .. .. .. .. VG 95328 S .. .. .. VG 95328 T .. .. .. HE 301 B 08 RC .. .. .. 1A HE 301 B 08 RP .. .. .. 1A * Not QPL. Other plating plating Souriau solder version crimp version NFC 93422 (HE 301 B) black anodized 851 .. .. .. .. .. 5029 851 .. .. .. .. .. 50031 HE 301 B .. .. .. .. .. 4A nickel 851 .. .. .. .. .. 5044 851 .. .. .. .. .. 5044 HE 301 B .. .. .. .. .. 5A 12 3 16 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 13 851 Series 851 version with solder contacts (olive green cadmium plating) connectors with backshells Souriau 851 00 E 851 00 EC 851 00 AC 851 00 P 851 00 A 851 00 J 851 00 JC 851 01 E 851 01 EC 851 01 AC 851 01 P 851 01 A 851 01 J 851 01 JC 851 02 E 851 06 E 851 06 EC 851 06 AC 851 06 P 851 06 A 851 06 J 851 06 JC 851 08 EC 851 08 P 851 07 E 851 07 EC 851 07 AC 851 07 P 851 07 A .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 NFC 93422 (HE 301 B) .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. HE 301 B 00 E HE 301 B 00 EC HE 301 B 00 AC HE 301 B 00 P HE 301 B 00 A HE 301 B 00 J .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1A 1A 1A 1A 1A 1A HE 301 B 01 E HE 301 B 01 EC HE 301 B 01 AC HE 301 B 01 P HE 301 B 01 A HE 301 B 01 J .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1A 1A 1A 1A 1A 1A HE 301 B 02 E HE 301 B 06 E HE 301 B 06 EC HE 301 B 06 AC HE 301 B 06 P HE 301 B 06 A HE 301 B 06 J .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1A 1A 1A 1A 1A 1A 1A HE 301 B 08 EC HE 301 B 08 P HE 301 B 07 E HE 301 B 07 EC HE 301 B 07 AC HE 301 B 07 P HE 301 B 07 A .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1A 1A 1A 1A 1A 1A 1A MIL-C 26482 G Series I VG 95328 MS 3110 E .. .. .. MS 3110 F .. .. .. MS 3110 P .. .. .. MS 3110 J .. .. .. MS 3111 E .. .. .. MS 3111 F .. .. .. MS 3111 P .. .. .. MS 3111 J MS 3112 E MS 3116 E MS 3116 F .. .. .. .. .. .. .. .. .. .. .. .. VG 95328 H .. .. .. MS 3116 P .. .. .. MS 3116 J .. .. .. MS 3114 E .. .. .. MS 3114 F .. .. .. MS 3114 P .. .. .. 851 hermetic version Souriau 851 02 H 851 07 H 851 IH NFC 93422 (model HE 301 B) .. .. P.50 .. .. P.50 .. .. P.50 HE 301 B 02 H HE 301 B 07 H HE 301 B 1 H MIL-C-26482G serie 1 .. .. P.3A .. .. P.3A .. .. P.3A *MS 3114 H.. .. P. *MS 3113 H.. .. P. VG 95328 VG 95328 F .. .. .. VG 95328 G .. .. .. * Not QPL. Contacts - Crimp contacts contact type male standard female male female for contact layouts 8-2, 8-3, 8-4 and 12-14 contact size part numbers section in O over insulation gauge AWG mm2 min/Max (mm) 8500-9573* 0.21 to 0.93 24 to 18 1.20 / 2.11 18 to 14 1.60 / 2.80 8500-9331 0.93 to 1.91 20 8500-781 0.06 to 0.21 30 to 24 16 8500-1985 0.60 20 8500-809 8500-812 8500-2054 8500-2055 8500-1053 8500-1058 8500-1054 8500-1059 0.21 to 0.93 24 to 18 1.20 / 2.11 0.93 to 1.91 18 to 14 1.60 / 2.80 8500-9213* 20 8500-697 for other contact layouts 8500-1758A 8500-1300 male 16 female reducing sleeve thermocouple chromel male alumel chromel female alumel chromel male alumel chromel female alumel Not to be used with reduced sleeve 20 16 Wire wrap contacts contact type contact size male part numbers diagonals gauge AWG number of wraps 8500-4220 MQ 0.78 0.85 0.78 0.85 1.55 1.70 1.55 1.70 26-28-30 3 26-28-30 3 20-22-24-26 3 20-22-24-26 3 20 female 8500-9351 900 male female 8500-4304 LY 16 8500-4305 900 13 4 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 14 851 Series Contact layouts Viewed from front face of male insulator shells 2 3 3A ou 98 8 2 O 1 (# 20) 6 3 O 1 (# 20) 7 4 3 O 1 (# 20) 33 4 O 1 (# 20) 3 O 1 (# 20) 98 10 6 O 1 (# 20) 3 7 O 1 (# 20) 8 6 O 1 (# 20) 10 2 14 12 3 O 1,6 (# 16) 5 8 O 1 (# 20) 12 10 O 1 (# 20) 2 O 1,6 (# 16) 15 18 14 O 1 (# 20) 19 14 8 O 1 (# 20) 4 O 1,6 (# 16) 5 O 1,6 (# 16) 8 23 14 O 1 (# 20) 1 O 1,6 (# 16) 18 O 1 (# 20) 19 O 1 (# 20) 26 16 22 O 1 (# 20) 1 O 1,6 (# 16) 8 O 1,6 (# 16) 11 32 26 O 1 (# 20) 30 18 16 29 O 1 (# 20) 1 O 1,6 (# 16) 32 O 1 (# 20) 11 O 1,6 (# 16) 39 41 24 25 27 20 37 O 1 (# 20) 2 O 1,6 (# 16) 16 O 1,6 (# 16) 21 36 41 O 1 (# 20) 24 O 1 (# 20) 55 32 25 O 1 (# 20) 27 O 1 (# 20) 34 22 21 O 1,6 (# 16) 36 O 1 (# 20) 55 O 1 (# 20) 32 O 1 (# 20) 34 O 1 (# 20) 61 24 solder contact layouts (QPL) hermetic version contact layouts solder contact layouts straight spills contact layouts solder contact layouts without grommet wire wrap contact layouts crimp contact layouts 14 61 O 1 (# 20) Other layouts: please consult us. 5 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 15 851 Series Polarization - insulator rotated inside metal body Viewed from front face of male insulator (receptacle or plug) X Y Z 58 60 60 45 90 122 210 210 -- -- -- -- -- -- -- -- -- -- -- -- 90 90 90 -- -- 180 -- -- 240 -- -- 270 * 10 6 7* 98 -- 90 60 -- 45 -- 112 155 -- 180 203 270 -- -- 292 295 -- * 12 3 8 10 2 14* 5 12 15 18 19 45 45 45 45 45 92 90 110 90 165 184 -- 155 180 315 273 -- 234 270 -- * * * * * * * 16 8 23 26 54 158 60 152 270 -- 180 -- 275 331 -- 338 18 11 32 30 62 85 180 119 138 193 241 222 285 16 39 41 24 25 27 238 63 45 70 72 72 318 144 126 145 144 144 22 21 36 55 32 34 16 72 30 72 62 24 61 90 W X Y NFC 93422 HE 30 1B MIL-C 26482G Serie 1 service 1 service 2 solder crimp solder crimp 1500 Vrms 2300 Vrms W 8 normal angle in degrees shell layout 14 20 Z 2 3 3A (98)* 4 33 * * * * * * * * * * * * * X X X * * * * * * * X X * X X X X X * X X * X * * * * * * * * * * * X X X X * * * * * * * * * * * * X X 340 265 350 * * * * * * * * * * X X 333 252 225 215 216 216 347 333 -- 290 288 288 * * * * * * * * * * * * * * 135 144 142 145 142 175 216 226 215 218 349 288 314 288 298 * * * * * * * * * * * X X X X 180 270 324 * * * * X * X X X X X X X X X * X * 8-98 layout W and X no standard orientations 10-7 & 12-14 layouts W no standard orientation Dimensions - square flange receptacle with backnut solder 00 E shell L Max size solder crimp HE 301 B 00 E MS 3110 E crimp 00 R HE 301 B 00 R MS 3120 E VG 95328 A F L E OA OD 4 Holes OJ C B Max C Max D Max E F Max J 08 32.70 32.00 12.03 17.90 1.32 13.50 15.09 20.99 3.13 10 32.70 32.00 15.01 11.70 1.32 16.70 18.26 24.19 3.13 12 32.70 32.00 19.07 11.70 1.32 19.90 20.62 26.54 3.13 14 32.70 32.00 22.25 11.70 1.32 23.40 23.00 28.89 3.13 16 32.70 32.00 25.42 11.70 1.32 26.60 24.61 31.29 3.13 18 32.70 32.00 28.60 11.70 1.32 29.50 26.97 33.69 3.13 20 22 B A 24 1.287 1.287 1.287 1.287 1.287 1.287 1.260 1.260 1.260 1.260 1.260 1.260 .474 .591 .751 .876 1.001 1.126 .705 .461 .461 .461 .461 .461 .052 .052 .052 .052 .052 .052 .531 .657 .783 .921 1.047 1.161 .594 .719 .812 .906 .969 1.062 .826 .952 1.045 1.137 1.232 1.326 .123 .123 .123 .123 .123 .123 34.50 33.40 31.77 14.35 2.15 32.70 29.36 36.89 3.13 1.358 1.315 1.251 .565 .085 1.287 1.156 1.452 .123 34.50 33.40 34.95 14.35 2.15 36.00 31.75 39.99 3.13 1.358 1.315 1.376 .565 .085 1.417 1.250 1.574 .123 34.50 33.40 38.12 15.20 2.15 39.10 34.92 43.15 3.81 1.358 1.315 1.501 .598 .085 1.539 1.375 1.699 .150 15 6 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 16 851 Series Square flange receptacle with straight cable clamp L Max shell size solder crimp solder HE 301 B 00 EC MS 3110 F HE 301 B 00 AC 00 EC 00 AC crimp 08 10 HE 301 B 00 RC MS 3120 F VG 95328 B 00 RC 12 14 L 4 Holes OJ F 16 E D OG OA 18 20 22 B C 24 A B Max C Max D Max E F Max G J 48.00 47.30 12.03 11.70 1.32 19.90 15.09 20.99 3.50 1.890 1.862 .052 .826 .138 .123 1.32 21.50 18.26 24.19 5.00 3.13 .474 .461 48.00 47.30 15.01 11.70 1.890 1.862 .591 .461 48.00 47.30 19.07 11.70 1.890 1.862 .751 .461 48.00 47.30 22.25 11.70 1.890 1.862 .876 .461 51.00 50.50 25.42 11.70 2.008 1.988 1.001 .461 51.00 50.50 28.60 11.70 2.008 1.988 1.126 .461 53.00 51.50 31.77 14.35 2.087 2.028 1.251 .565 53.00 51.50 34.95 14.35 2.087 2.028 1.376 .565 .052 .783 .846 .594 .952 .197 .123 1.32 25.00 20.62 26.54 8.20 3.13 .052 .323 .123 1.32 27.80 23.00 28.89 10.00 3.13 .984 .052 1.094 .719 3.13 .812 1.045 .394 .123 1.32 29.40 24.61 31.29 13.00 3.13 .052 1.157 .906 1.137 .512 .123 1.32 35.30 26.97 33.69 16.00 .969 1.232 3.13 .630 .123 2.15 35.30 29.36 36.89 16.00 .052 1.390 1.062 1.326 3.13 .630 .123 2.15 41.10 31.75 39.99 19.30 .085 1.390 1.156 1.452 3.13 .760 .123 53.00 51.50 38.12 15.20 2.15 42.40 34.92 43.15 20.60 3.81 2.087 2.028 1.501 .085 1.669 1.375 1.699 .150 .598 .085 1.618 1.250 1.574 .811 Square flange receptacle with straight backshell for potting L Max shell size solder crimp solder HE 301 B 00 P MS 3110 P 00 P 08 crimp HE 301 B 00 RP MS 3120 P 00 RP 10 12 14 L 4 Holes OJ F 16 E D OA OG 18 20 22 B C 24 A B Max C Max D Max E F Max G Max 36.20 41.70 12.03 11.70 1.32 15.34 15.09 20.99 10.46 1.425 1.642 .052 .474 .461 36.20 41.70 15.01 11.70 1.425 1.642 .591 .461 36.20 41.70 19.07 11.70 1.425 1.642 .751 .461 36.20 41.70 22.25 11.70 1.425 1.642 .876 .461 36.20 41.70 25.42 11.70 1.425 1.642 1.001 .461 36.91 44.46 28.60 11.70 1.453 1.750 1.126 .461 43.80 50.93 31.77 14.35 1.724 2.005 1.251 .565 43.80 50.93 34.95 14.35 1.724 2.005 1.376 .123 1.32 17.70 18.26 24.19 13.55 3.13 .533 .123 3.13 .952 .550 .123 1.32 23.90 23.00 28.89 17.42 3.13 .052 .854 .719 .826 1.32 21.69 20.62 26.54 13.96 .052 .697 .594 3.13 .412 .052 .604 J .941 .812 1.045 .686 .123 1.32 27.00 24.61 31.29 20.56 3.13 .052 1.063 .906 1.137 .809 .123 1.32 30.50 26.97 33.69 23.66 .969 1.232 3.13 .931 .123 2.15 33.65 29.36 36.89 23.92 .052 1.201 1.062 1.326 3.13 .942 .123 2.15 37.10 31.75 39.99 25.52 .085 1.325 1.156 1.452 3.13 .565 .085 1.461 1.250 1.574 1.005 .123 43.80 51.40 38.12 15.20 2.15 40.00 34.92 43.15 32.00 3.81 1.724 2.024 1.501 .085 1.575 1.375 1.699 1.260 .150 .598 Square flange receptacle with straight adapter solder 00 A crimp 00 RA shell L Max size solder HE 301 B 00A 08 HE 301 B 00 RA 10 12 L 4 Holes OJ 14 F 18 E OA OG K D 16 20 B A crimp 22 C 24 16 7 B Max C Max D Max E F Max G Max J 41.00 12.03 11.70 1.32 14.50 15.09 20.99 9.10 3.13 1.614 .052 .358 .123 41.00 15.01 11.70 1.32 18.70 18.26 24.19 12.08 3.13 1.614 .052 .476 .123 41.00 19.07 11.70 1.32 21.70 20.62 26.54 15.25 3.13 1.614 .052 .600 .123 41.00 22.25 11.70 1.32 25.10 23.00 28.89 18.15 3.13 1.614 .052 .715 .123 41.00 25.42 11.70 1.32 28.13 24.61 31.29 21.32 3.13 1.614 1.001 .052 1.107 .123 .474 .591 .751 .876 .461 .461 .461 .461 .461 .571 .736 .854 .988 .594 .719 .826 .952 .812 1.045 .906 1.137 .969 1.232 .839 41.00 28.60 11.70 1.32 31.38 26.97 33.69 24.32 1.614 1.126 .052 1.235 1.062 1.326 .461 44.00 31.77 14.35 1.732 1.251 .957 2.15 34.30 29.36 36.89 26.73 K threading UNEF 2A 1/2 18 5/8 24 3/4 20 7/8 20 1-20 3.13 1-3/16 18 .123 3.13 1-3/16 18 .565 .085 1.350 1.156 1.452 1.052 .123 44.00 34.95 14.35 2.15 37.60 31.75 39.99 30.67 3.13 1-7/16 18 .565 .085 1.480 1.250 1.574 1.207 .123 44.00 38.12 15.20 1.732 1.376 2.15 40.70 34.92 43.15 33.08 3.81 1-7/16 18 1.732 1.501 .085 1.602 1.375 1.699 1.302 .150 .598 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 17 851 Series Square flange receptacle with straight backshell for heatshrink sleeving solder 00 T crimp 00 RT shell L Max size solder crimp 08 10 12 L 4 Holes OJ F 16 E OD OG OA 14 18 B M C 20 22 24 B C D Max Max Max A E F L Max Max solder crimp J M Max 36.70 36.00 12.03 11.70 1.32 15.35 15.09 20.99 7.20 6.70 3.13 3.70 1.445 1.417 .474 .461 .052 .604 .594 .826 .283 .264 .123 .146 36.70 36.00 15.01 11.70 1.32 18.15 18.26 24.19 10.20 9.40 3.13 3.70 1.445 1.417 .591 .461 .052 .715 .719 .952 .402 .370 .123 .146 36.70 36.00 19.07 11.70 1.32 23.45 20.62 26.54 13.20 11.95 3.13 3.70 1.445 1.417 .751 .461 .052 .923 .812 1.045 .520 .470 .123 .146 36.70 36.00 22.25 11.70 1.32 24.25 23.00 28.89 16.10 15.15 3.13 3.70 1.445 1.417 .876 .461 .052 .955 .906 1.137 .634 .596 .123 .146 39.00 38.30 28.60 11.70 1.32 31.75 26.97 33.69 21.30 19.95 3.13 3.70 1.535 1.508 1.001 .461 .052 1.163 .969 1.232 .758 .711 .123 .146 39.00 38.30 28.60 11.70 1.32 31.75 26.97 33.69 21.30 19.95 3.13 3.70 1.535 1.508 1.126 .461 .052 1.250 1.062 1.326 .839 .785 .123 .146 45.30 44.20 31.77 14.35 2.15 35.85 29.36 36.89 24.40 23.05 3.13 3.70 1.783 1.740 1.251 .565 .085 1.411 1.156 1.452 .961 .907 .123 .146 45.30 44.20 34.95 14.35 2.15 38.20 31.75 39.99 27.50 25.55 3.13 3.70 1.783 1.740 1.376 .565 .085 1.504 1.250 1.574 1.083 1.006 .123 .146 44.00 42.60 38.12 15.20 2.15 41.30 34.92 43.15 30.60 28.65 3.81 3.70 1.732 1.677 1.501 .598 .085 1.626 1.375 1.699 1.205 1.128 .150 .146 Square flange receptacle with removable straight backshell for heatshrink sleeving solder 00 M crimp 00 RM shell L Max A size solder crimp 50.00 12.03 08 L 4 Holes OJ 12 F 16 E OA OG OD 14 18 B C M 20 22 24 C Max D Max 13.55 15.09 11.70 1.32 .474 .461 .052 50.00 15.01 11.70 1.32 1.969 10 B Max .591 .461 .052 50.00 19.07 1.969 11.70 1.32 .751 .461 .052 50.00 22.25 1.969 11.70 1.32 .876 .461 .052 50.00 25.42 1.969 11.70 1.32 1.001 .461 .052 50.00 28.60 1.969 11.70 1.32 .461 .052 53.30 31.70 14.35 1.969 2.15 2.098 1.126 .565 .085 53.30 34.95 14.35 2.15 2.098 1.376 .565 .085 53.30 38.12 15.20 2.15 2.098 1.376 1.501 .598 .085 E F Max G Max J M Max 3.50 20.99 7.05 3.13 .719 .952 .390 .123 .138 15.35 18.26 24.19 9.90 3.13 3.50 1.045 .496 .123 .138 26.54 12.60 3.13 3.50 .604 .767 .812 19.48 20.62 .767 .812 21.30 23.00 .839 .906 24.50 24.61 .965 .969 26.45 26.97 1.041 1.062 34.24 31.75 1.348 1.250 34.24 31.75 1.348 1.250 36.47 34.92 1.436 1.375 .496 .123 .138 28.89 15.90 1.045 3.13 3.50 .626 .123 .138 31.29 18.95 1.137 3.13 3.50 .746 .123 .138 33.69 20.90 1.232 3.13 3.50 .823 .123 .138 39.99 26.60 1.326 3.13 3.50 1.047 .123 .138 39.99 26.60 1.574 3.13 3.50 1.047 .123 .138 43.15 29.30 1.574 3.81 3.50 .150 .138 1.699 1.154 Square flange receptacle with removable straight backshell for screen termination and heatshrink sleeving (38 and 42 suffix) solder 00 T crimp 00 RT shell L Max A size solder crimp 51.60 12.03 08 4 Holes OJ L 12 F 16 E OD OA OG 14 18 B C M 20 22 24 C Max D Max 18.25 15.09 11.70 1.32 .474 .461 .052 51.60 15.01 11.70 1.32 2.031 10 B Max .591 .461 .052 51.60 22.25 2.031 11.70 1.32 .751 .461 .052 51.60 22.25 2.031 11.70 1.32 .876 .461 .052 51.60 25.42 2.031 11.70 1.32 1.001 .461 .052 52.00 28.60 2.031 11.70 1.32 .461 .052 55.10 31.77 14.35 2.047 2.15 2.169 1.126 .565 .085 55.10 34.95 14.35 2.15 2.169 1.251 .565 .085 55.10 38.12 15.20 2.15 2.169 1.376 1.501 .598 .085 E F Max G Max J M Max 3.70 20.99 7.45 3.13 .594 .826 .293 .123 .146 20.25 18.26 24.19 9.00 3.13 3.70 .952 .354 .123 .146 26.54 13.30 3.13 3.70 .719 .797 .719 24.75 20.62 .974 .812 27.75 23.00 1.093 .906 30.05 24.61 1.183 .969 34.15 26.97 1.344 1.062 37.25 29.36 1.467 1.156 40.45 31.75 1.593 1.250 36.47 34.92 1.719 1.375 .524 .123 .146 28.89 16.50 1.045 3.13 3.70 .650 .123 .146 31.29 18.50 1.137 3.13 3.70 .728 .123 .146 33.69 21.90 1.232 3.13 3.70 .862 .123 .146 36.89 25.10 1.326 3.13 3.70 .988 .123 .146 39.99 28.20 1.452 3.13 3.70 1.110 .123 .146 43.15 29.30 1.574 3.81 3.50 .150 .146 1.699 1.236 17 8 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 18 851 Series Square flange receptacle with removable straight backshell for screen termination and heatshrink sleeving solder 00 G crimp 00 RG shell L Max A B size solder Max crimp 51.60 12.03 11.70 08 VG 95328 R 2.031 10 4 Holes OJ L 12 F 16 E OD OG OA 14 18 B C 20 M 22 24 1.32 .461 .052 51.60 15.01 11.70 1.32 2.031 .474 C Max .461 .052 51.60 19.07 11.70 1.32 2.031 .591 .461 .052 51.60 22.25 11.70 1.32 2.031 .751 .461 .052 51.60 25.42 11.70 1.32 2.031 .876 .461 .052 52.00 28.60 11.70 1.32 2.047 1.001 .461 .052 55.10 31.77 14.35 2.15 2.169 1.126 .565 .085 55.10 34.95 14.35 2.15 2.169 1.251 .565 .085 55.10 38.12 15.20 2.15 2.169 1.376 1.501 .598 D Max F Max G Max J M Max 18.25 15.09 20.99 3.70 E 7.45 3.13 .826 .293 .123 .146 20.25 18.26 24.19 9.00 3.13 3.70 .719 .797 .594 .354 .123 .146 24.75 20.62 26.54 13.30 3.13 3.70 .974 .719 .524 .123 .146 27.75 23.00 28.89 16.50 3.13 3.70 1.093 .812 .952 .650 .123 .146 30.05 24.61 31.29 18.50 3.13 3.70 1.183 .906 1.045 .728 .123 .146 34.15 26.97 33.69 21.90 3.13 3.70 1.344 .969 1.137 .862 .123 .146 37.25 29.36 36.89 25.10 3.13 3.70 1.467 1.062 1.232 .988 .123 .146 40.45 31.75 39.99 28.20 3.13 3.70 1.593 1.156 1.326 1.250 1.452 1.110 .123 .146 43.65 34.92 43.15 31.40 1.574 3.81 3.70 .150 .146 .085 1.719 1.375 1.699 1.236 B Max C Max D Max E F Max min Max 14.40 15.09 Square flange receptacle with straight sealing gland backshell solder 00 J shell L Max size solder HE 301 B 00 J 08 10 L 4 Holes OJ 12 F 16 E OD OA OG 14 18 B C 20 22 24 A 47.60 12.03 11.70 1.32 .474 .461 .052 47.60 15.01 11.70 1.32 1.874 .591 .461 .052 48.70 19.07 1.874 11.70 1.32 .751 .461 .052 53.50 22.25 1.917 11.70 1.32 .876 .461 .052 59.00 25.42 2.106 11.70 1.32 1.001 .461 .052 65.00 28.60 2.323 11.70 1.32 .461 .052 79.10 31.77 14.35 2.559 2.15 3.114 1.126 .565 .085 80.00 34.95 14.35 2.15 3.150 1.251 .565 .085 90.00 38.12 15.20 2.15 3.543 1.376 1.501 .598 .085 G J 20.99 5.02 5.84 .594 .826 .198 .230 .123 17.60 18.26 24.19 5.94 6.76 3.13 .234 .266 .123 9.34 10.16 3.13 .567 .719 .952 21.10 20.62 .693 26.54 .831 .812 24.40 23.00 .961 .906 27.60 24.61 1.087 .969 30.80 26.97 1.213 1.062 34.10 29.36 1.343 1.156 37.30 31.75 1.469 1.250 40.50 34.92 1.594 1.045 .400 .123 28.89 11.32 12.14 3.13 1.137 .368 3.13 .478 .123 31.29 14.73 15.55 3.13 1.232 .446 .612 .123 33.69 16.00 16.82 3.13 1.326 .580 .662 .123 36.89 16.89 17.70 3.13 1.452 .630 .697 .123 39.99 17.78 18.60 3.13 1.574 .665 .732 .123 43.15 20.34 21.16 .700 3.81 1.375 1.699 .801 .833 E F Max min Max .150 Square flange receptacle with straight sealing gland and cable clamp solder 00 JC shell L Max size solder MS 3110J 08 10 L 4 Holes OJ F 12 16 E OD OG OA 14 18 20 22 24 18 9 A 57.68 12.03 B Max C Max D Max 19.90 15.09 11.70 1.32 .474 .461 .052 57.68 15.01 11.70 1.32 2.271 .591 .461 .052 61.24 19.07 2.271 11.70 1.32 .751 .461 .052 66.01 22.25 2.411 11.70 1.32 .876 .461 .052 74.75 25.42 2.599 11.70 1.32 1.001 .461 .052 80.57 28.60 2.943 11.70 1.32 .461 .052 91.69 31.77 14.35 3.172 2.15 3.610 1.126 .565 .085 95.66 34.95 14.35 2.15 3.766 1.251 .565 .085 101.22 38.12 15.20 2.15 3.985 1.376 1.501 .598 .085 G J 20.99 5.02 5.84 .594 .826 .198 .230 .123 21.50 18.26 24.19 5.94 6.76 3.13 .234 .266 .123 9.34 10.16 3.13 .783 .719 .952 25.00 20.62 .846 26.54 .984 .812 27.80 23.00 1.094 .906 29.40 24.61 1.157 .969 35.30 26.97 1.390 1.062 35.30 29.36 1.390 1.156 41.10 31.75 1.618 1.250 42.40 34.92 1.669 1.375 1.045 .400 .123 28.89 11.32 12.14 3.13 1.137 .368 3.13 .478 .123 31.29 14.73 15.55 3.13 1.232 .446 .612 .123 33.69 16.00 16.82 3.13 1.326 .580 .662 .123 36.89 16.89 17.70 3.13 1.452 .630 .697 .123 39.99 17.78 18.60 3.13 1.574 .665 .732 .123 43.15 20.34 21.16 3.81 1.699 .700 .801 .833 .150 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 19 851 Series Jam nut receptacle with backnut shell size solder HE 301 B 07 E MS 3114 E 07 E 08 crimp HE 301 B 07 R MS 3124 E VG 95328 D 07 R L 10 12 14 P OF 16 S OA OD 18 20 22 C B 24 L Max solder A B Max crimp 34.10 33.50 C Max D Max 12.03 17.90 2.64 1.319 .474 .705 .104 34.10 33.50 15.01 17.90 2.64 1.343 1.319 .591 .705 .104 34.10 33.50 1.343 19.07 17.90 2.64 1.319 .751 .705 .104 34.10 33.50 1.343 22.25 17.90 2.64 1.319 .876 .705 .104 34.10 33.50 1.343 25.42 17.90 2.64 1.319 1.001 .705 .104 34.10 33.50 1.343 28.60 17.90 2.64 1.319 1.126 .705 .104 39.30 37.90 1.343 31.77 22.45 3.44 1.492 1.251 .884 .135 39.30 37.90 1.547 34.95 22.45 3.44 1.492 1.376 .884 .135 39.30 37.90 1.547 38.12 23.30 3.44 1.501 .917 .135 1.547 1.492 P Max S Max 18.50 26.94 19.29 23.94 .728 F Max .759 .943 21.70 30.14 22.38 26.94 .854 1.061 .881 1.061 24.90 34.94 27.13 31.74 .980 1.187 1.068 1.250 28.10 38.04 30.33 34.94 1.106 1.376 1.194 1.376 31.20 41.24 33.48 38.24 1.228 1.498 1.318 1.506 34.40 44.44 36.68 41.34 1.354 1.624 1.444 1.628 38.30 49.14 39.83 46.04 1.508 1.750 1.568 1.813 41.50 52.24 43.03 49.24 1.634 1.935 1.694 1.939 44.70 55.54 46.18 52.74 1.760 2.057 2.187 1.818 2.076 G P Max S Max Jam nut receptacle with straight cable clamp L Max shell size solder crimp solder HE 301 B 07 EC MS 3114 F HE 301 B 07 AC 07 EC 07 AC crimp 08 10 HE 301 B 07 RC MS 3124 F VG 95328 E 07 RC 12 L 14 P OF 16 S D OA OG 18 20 22 B C 24 A B Max 49.31 49.10 12.03 17.90 1.941 1.933 .474 .705 49.31 49.10 15.01 17.90 1.941 1.933 .591 .705 49.17 49.10 19.07 17.90 1.936 1.933 .751 .705 49.17 49.10 22.25 17.90 1.936 1.933 .876 .705 52.34 52.20 25.42 17.90 2.061 2.055 1.001 .705 53.22 53.10 28.60 17.90 2.095 2.091 1.126 .705 58.10 58.00 31.77 22.45 2.287 2.283 1.251 .884 58.10 58.00 34.95 22.45 2.287 2.283 1.376 .884 58.10 58.00 38.12 23.30 2.287 2.283 1.501 .917 C Max D Max F Max 2.64 19.90 26.94 .104 .783 1.061 2.64 21.50 30.14 .104 .846 1.187 2.64 25.00 34.94 .104 .984 1.376 3.50 19.29 23.94 .138 .759 .943 5.00 22.38 26.94 .197 .881 1.061 8.20 27.13 31.74 .323 1.068 1.250 2.64 27.80 38.04 10.00 30.33 34.94 .104 1.094 1.498 .394 1.194 1.376 2.64 29.40 41.24 13.00 33.48 38.24 .104 1.157 1.624 .512 1.318 1.506 2.64 35.30 44.44 16.00 36.68 41.34 .104 1.390 1.750 .630 1.444 1.628 3.44 35.30 49.14 16.00 39.83 46.04 .135 1.390 1.935 .630 1.568 1.813 3.44 41.10 52.24 19.30 43.03 49.24 .135 1.618 2.057 .760 1.694 1.939 3.44 42.40 55.54 20.60 46.18 52.74 .135 1.669 2.187 D Max F Max .811 1.818 2.076 P Max S Max Jam nut receptacle with straight backshell for potting L Max shell size solder crimp solder HE 301 B 07 P MS 3114 P 07 P 08 crimp HE 301 B 07 RP MS 3124 P 07 RP 10 12 L OF 14 P 16 S D OG OA 18 20 22 B C 24 A B Max 34.30 39.80 12.03 17.90 1.350 1.567 .474 .705 34.30 39.80 15.01 17.90 1.350 1.567 .591 .705 34.30 39.80 19.07 17.90 1.350 1.567 .751 .705 34.30 39.80 22.25 17.90 1.350 1.567 .876 .705 34.30 39.80 25.42 17.90 1.350 1.567 1.001 .705 34.10 41.80 28.60 17.90 1.343 1.646 1.126 .705 42.25 49.92 31.77 22.45 1.663 1.965 1.251 .884 42.25 49.92 34.95 22.45 1.663 1.965 1.376 .884 43.26 51.30 38.12 23.30 1.703 2.020 1.501 .917 C Max G Max 2.64 15.34 26.94 10.46 19.29 23.94 .104 .604 1.061 .412 .759 .943 2.64 17.70 30.14 13.55 22.38 26.94 .104 .697 1.187 .533 .881 1.061 2.64 21.69 34.94 13.96 27.13 31.74 .104 .854 1.376 .550 1.068 1.250 2.64 23.90 38.04 17.42 30.33 34.94 .104 .941 1.498 .686 1.194 1.376 2.64 27.00 41.24 20.56 33.48 38.24 .104 1.063 1.624 .809 1.318 1.506 2.64 30.50 44.44 23.66 36.68 41.34 .104 1.201 1.750 .931 1.444 1.628 3.44 33.65 49.14 23.92 39.83 46.04 .135 1.325 1.935 .942 1.568 1.813 3.44 37.10 52.24 25.52 43.03 49.24 .135 1.461 2.057 1.005 1.694 1.939 3.44 40.00 55.54 32.00 46.18 52.74 .135 1.575 2.187 1.260 1.818 2.076 19 10 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 20 851 Series Jam nut receptacle with straight backshell for heatshrink sleeving solder 07 T crimp 07 RT shell L Max size solder crimp VG 08 95328 S 10 L 12 P OF 16 S OD OG OA 14 18 M B 20 C 22 24 B C D F G Max M P S Max Max Max Max solder crimp Max Max Max A 42.60 41.50 12.03 17.90 2.64 15.35 26.94 7.20 6.70 3.70 19.29 23.94 1.677 1.634 .474 .705 .104 .604 1.061 .283 .264 .146 .759 .943 42.60 41.50 15.01 17.90 2.64 18.15 30.14 10.20 9.40 3.70 22.38 26.94 1.677 1.634 .591 .705 .104 .715 1.187 .402 .370 .146 .881 1.061 42.60 41.50 19.07 17.90 2.64 23.45 34.94 13.20 11.95 3.70 27.13 31.74 1.677 1.634 .751 .705 .104 .923 1.376 .520 .470 .146 1.068 1.250 42.60 41.50 22.25 17.90 2.64 24.25 38.04 16.10 15.15 3.70 30.33 34.94 1.677 1.634 .876 .705 .104 .955 1.498 .634 .596 .146 1.194 1.376 44.40 43.80 25.42 17.90 2.64 29.55 41.24 19.25 18.05 3.70 33.48 38.24 1.748 1.724 1.001 .705 .104 1.163 1.624 .758 .711 .146 1.318 1.506 44.40 43.80 28.60 17.90 2.64 31.75 44.44 21.30 19.95 3.70 36.68 41.24 1.748 1.724 1.126 .705 .104 1.250 1.750 .839 .785 .146 1.444 1.624 50.90 49.80 31.77 22.45 3.44 35.85 49.14 24.40 23.05 3.70 39.83 46.04 2.004 1.961 1.251 .884 .135 1.411 1.935 .961 .907 .146 1.568 1.813 50.90 49.80 34.95 22.45 3.44 38.20 52.24 27.50 25.55 3.70 43.03 49.24 2.004 1.961 1.376 .884 .135 1.504 2.057 1.083 1.006 .146 1.694 1.939 49.60 48.50 38.12 23.30 3.44 41.30 55.54 30.60 28.65 3.70 46.18 52.74 1.953 1.909 1.501 .917 .135 1.626 2.187 1.205 1.128 .146 1.818 2.076 Jam nut receptacle with removable straight backshell for screen termination and heatshrink sleeving (38 and 42 suffix) solder 07 T crimp 07 RT shell L Max size solder A crimp 08 10 12 L P OF 14 B C S OD OA OG 16 18 20 M 22 24 B Max C Max 60.00 12.03 17.90 2.64 2.362 .474 .705 .104 60.00 15.01 17.90 2.64 2.362 .591 .705 .104 60.00 19.07 17.90 2.64 2.362 .751 .705 .104 60.00 22.25 17.90 2.64 2.362 .876 .705 .104 60.00 25.42 17.90 2.64 2.362 1.001 .705 .104 60.40 28.60 17.90 2.64 2.378 1.126 .705 .104 63.40 31.77 22.45 3.44 2.496 1.251 .884 .135 63.40 34.95 22.45 3.44 2.496 1.376 .884 .135 63.40 38.12 23.30 3.44 2.496 1.501 .917 .135 D Max F Max G Max M Max 18.25 26.94 7.45 3.70 19.29 23.94 .719 1.061 .293 20.25 30.14 9.00 .797 1.187 .354 24.75 34.94 13.30 .974 1.376 .524 27.75 38.04 16.50 1.093 1.498 .650 30.05 41.24 18.50 1.183 1.624 .728 34.15 44.44 21.90 1.344 1.750 .862 37.25 49.14 25.10 1.467 1.935 .988 40.45 52.24 28.20 1.593 2.057 1.110 43.65 55.54 31.40 .146 P Max .759 S Max .943 3.70 22.38 26.94 .146 .881 1.061 3.70 27.13 31.74 .146 1.068 1.250 3.70 30.33 34.94 .146 1.194 1.376 3.70 33.48 38.24 .146 1.318 1.506 3.70 36.68 41.34 .146 1.444 1.628 3.70 39.83 46.04 .146 1.568 1.813 3.70 43.03 49.24 .146 1.694 1.939 3.70 46.18 52.74 1.719 2.187 1.236 .146 1.818 2.076 D Max F Max G Max M Max P Max S Max 2.64 16.30 26.94 7.45 3.60 19.29 23.94 Jam nut receptacle with removable straight backshell for screen termination and heatshrink sleeving solder 07 G crimp 07 RG shell L Max size solder A crimp 08 VG 95328 T 10 L 12 P B C 14 16 S OA OG OD OF 18 20 M 22 24 20 11 B Max 62.20 12.03 11.90 2.449 .474 .469 62.20 15.01 17.90 2.449 .591 .705 62.20 19.07 17.90 2.449 .751 .705 62.40 22.25 17.90 2.457 .876 .705 62.40 25.42 17.90 2.457 1.001 .705 62.40 28.60 17.90 2.457 1.126 .705 67.50 31.77 22.45 2.657 1.251 .884 67.50 34.95 22.45 2.657 1.376 .884 67.50 38.12 23.30 2.657 1.501 .917 C Max .104 .642 1.061 .293 2.64 18.30 30.14 10.30 .104 .720 1.187 .406 2.64 22.30 34.94 13.20 .104 .878 1.376 .520 2.64 25.30 38.04 16.50 .104 .996 1.498 .650 2.64 28.30 41.24 19.35 .104 1.114 1.624 .762 2.64 32.30 44.44 21.60 .104 1.272 1.750 .850 3.44 34.30 49.14 24.80 .135 1.350 1.935 .976 3.44 38.30 52.24 27.90 .135 1.508 2.057 1.098 3.44 41.30 55.54 31.00 .135 1.626 2.187 1.220 .142 .759 .943 3.60 22.38 26.94 .142 .881 1.061 3.60 27.13 31.74 .142 1.068 1.250 3.60 30.33 34.94 .142 1.194 1.376 3.60 33.48 38.24 .142 1.318 1.506 3.60 36.68 41.34 .142 1.444 1.628 3.60 39.83 46.04 .142 1.568 1.813 3.60 43.03 49.24 .142 1.694 1.939 3.60 46.18 52.74 .142 1.818 2.076 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 21 851 Series Square flange receptacle not accepting backshell solder shell size HE 301 B 02 E MS 3112 E VG 95328 H 02 E 08 crimp 10 HE 301 B 02 R MS 3122 E VG 95328 C 02 R 12 14 4 holes oJ L E 18 F oD oA 16 20 B 22 C 24 L Max solder crimp A B Max C Max D Max E F Max J 25.18 32.35 3.13 12.03 11.70 1.32 10.84 15.09 20.99 1.274 .474 .461 .052 .427 .594 .826 .123 25.10 32.35 15.01 11.70 1.32 13.99 18.26 24.19 3.13 .991 1.274 .591 .461 .052 .551 .719 .952 .123 25.10 32.35 .988 19.07 11.70 1.32 17.37 20.62 26.54 3.13 1.274 .751 .461 .052 .684 .812 1.045 .123 25.10 32.35 .988 22.25 11.70 1.32 20.57 23.00 28.89 3.13 1.274 .876 .461 .052 .810 .906 1.137 .123 25.10 32.35 .988 25.42 11.70 1.32 23.72 24.61 31.29 3.13 1.274 1.001 .461 .052 .934 .969 1.232 .123 25.10 32.35 .988 28.60 11.70 1.32 26.69 26.97 33.69 3.13 1.126 .461 .052 1.051 1.062 1.326 .123 31.77 14.35 2.15 29.89 29.36 36.89 3.13 .988 1.274 26.67 33.95 1.050 1.337 1.251 26.67 33.95 1.050 .085 1.177 1.156 1.452 .123 2.15 33.04 31.75 39.99 3.13 1.337 1.376 26.67 33.95 1.050 .565 34.95 14.35 .565 .085 1.301 1.250 1.574 .123 38.12 15.20 2.15 36.24 34.92 43.15 3.81 .085 1.427 1.375 1.699 .150 1.337 1.501 .598 Jam nut receptacle not accepting backshell solder 07 A shell size HE 301 B 07 A 08 10 12 P L 14 S oA 16 18 20 oF C B 22 24 L Max solder A B Max C Max F Max P Max S Max 25.18 12.03 17.90 2.64 26.94 19.29 23.94 .991 .474 .705 .104 1.061 .759 .943 25.10 15.01 17.90 2.64 30.14 22.38 26.94 .988 .591 .705 .104 1.187 .881 1.061 25.10 19.07 17.90 2.64 34.94 27.13 31.74 .988 .751 .705 .104 1.376 1.068 1.250 25.10 22.25 17.90 2.64 38.04 30.33 34.94 .988 .876 .705 .104 1.498 1.194 1.376 25.10 25.42 17.90 2.64 41.24 33.48 38.24 .988 1.001 .705 .104 1.624 1.318 1.506 25.10 28.60 17.90 2.64 44.44 36.68 41.34 .988 1.126 .705 .104 1.750 1.444 1.628 26.67 31.77 22.45 3.44 49.14 39.83 46.04 1.050 1.251 .884 .135 1.935 1.568 1.813 26.67 34.95 22.45 3.44 52.24 43.03 49.24 1.050 1.376 .884 .135 2.057 1.694 1.939 26.67 38.12 23.30 3.44 55.54 46.18 52.74 1.050 1.501 .917 .135 2.187 1.818 2.076 Cable connecting receptacle with backnut solder shell L Max size solder crimp HE 301 B 01 E MS 3111 E 01 E 08 crimp HE 301 B 01 R MS 3121 E 01 R 10 12 L P 14 18 oD oA 16 20 B C oF 22 24 A B Max C Max D Max F Max P Max 20.99 32.70 32.00 12.03 10.60 2.10 13.50 24.24 1.287 1.260 .474 .417 .083 .531 .954 .826 32.70 32.00 15.01 10.60 2.10 16.70 27.44 24.19 1.287 1.260 .591 .417 .083 .657 1.080 .952 32.70 32.00 19.07 10.60 2.10 19.90 29.79 26.54 1.287 1.260 .751 .417 .083 .783 1.173 1.045 32.70 32.00 22.25 10.60 2.10 23.40 32.10 28.89 1.287 1.260 .876 .417 .083 .921 1.264 1.137 32.70 32.00 25.42 10.60 2.10 26.60 34.59 31.29 1.287 1.260 1.001 .417 .083 1.047 1.362 1.232 32.70 32.00 28.60 10.60 2.10 29.50 36.94 33.69 1.287 1.260 1.126 .417 .083 1.161 1.454 1.326 34.50 33.40 31.77 13.85 2.65 32.70 40.14 36.89 1.358 1.315 1.251 .545 .104 1.287 1.580 1.452 34.50 33.40 34.95 13.85 2.65 36.00 43.24 40.00 1.358 1.315 1.376 .545 .104 1.417 1.702 1.575 34.50 33.40 38.12 14.70 2.65 39.10 46.44 43.29 1.358 1.315 1.501 .579 .104 1.539 1.828 1.704 21 12 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 22 851 Series Cable connecting receptacle with straight cable clamp L Max shell size solder crimp solder 01 EC 01 AC crimp 01 RC HE 301 B 01 EC MS 3111 F HE 301 B 01 AC 08 10 HE 301 B 01 RC MS 3121 F 12 L 14 P 18 D oG oD oA 16 20 B C 22 oF 24 48.00 47.30 1.890 1.862 48.00 47.30 1.890 1.862 48.00 47.30 1.890 1.862 48.00 47.30 1.890 1.862 51.00 50.50 2.008 1.988 51.00 50.50 2.008 1.988 53.00 51.50 2.087 2.028 53.00 51.50 2.087 2.028 53.00 51.50 2.087 2.028 B Max C Max D Max F Max G Max 12.03 10.60 3.50 20.99 A 2.10 19.90 24.24 .417 .083 .783 .954 15.01 10.60 2.10 21.50 27.44 .474 .417 .083 .846 1.080 19.07 10.60 .591 2.10 25.00 29.79 .417 .083 .984 1.173 22.25 10.60 .751 2.10 27.80 32.10 .417 .083 1.094 1.264 25.42 10.60 .876 2.10 29.40 34.59 .417 .083 1.157 1.362 28.60 10.60 1.001 2.10 35.30 36.94 .417 .083 1.390 1.454 31.77 13.85 1.126 2.65 35.30 40.14 .545 .104 1.390 1.580 34.95 13.85 1.251 2.65 41.10 43.24 1.376 .138 P Max .826 5.00 24.19 .197 .952 8.20 26.54 .323 1.045 10.00 28.89 .394 1.137 13.00 31.29 .512 1.232 16.00 33.69 .630 1.326 16.00 36.89 .630 1.452 19.30 40.00 .545 .104 1.618 1.702 38.12 14.70 2.65 42.40 46.44 .579 .104 1.669 1.828 B Max C Max D Max F Max G Max 12.03 10.60 10.46 20.99 1.501 .760 1.575 20.60 43.29 .811 1.704 Cable connecting receptacle with straight backshell for potting L Max shell size solder crimp solder 01 P HE 301 B 01 P MS 3111 P 08 crimp 01 RP HE 301 B 01 RP MS 3121 P 10 12 L P 14 oD oG oA 16 18 20 oF B C 22 24 36.20 41.70 1.425 1.642 36.20 41.70 1.425 1.642 36.20 41.70 1.425 1.642 36.20 41.70 1.425 1.642 36.20 41.70 1.425 1.642 36.91 44.46 1.453 1.750 43.80 50.93 1.724 2.005 43.80 50.93 1.724 2.005 43.80 50.93 A 2.10 15.34 24.24 .417 .083 .604 .954 15.01 10.60 2.10 17.70 27.44 .474 .417 .083 .697 1.080 19.07 10.60 .591 2.10 21.69 29.79 .417 .083 .854 1.173 22.25 10.60 .751 2.10 23.90 32.10 .417 .083 .941 1.264 25.42 10.60 .876 2.10 27.00 34.59 .417 .083 1.063 1.362 28.60 10.60 1.001 2.10 30.50 36.94 .417 .083 1.201 1.454 31.77 13.85 1.126 2.65 33.65 40.15 .545 .104 1.325 1.581 34.95 13.85 1.251 2.65 37.10 42.24 .545 .104 1.461 1.663 38.12 14.70 1.376 2.65 40.00 46.44 .579 .104 1.575 1.828 1.724 2.005 1.501 L Max solder crimp A B Max C Max D Max F Max 10.60 2.10 14.50 .412 P Max .826 13.55 24.19 .533 .952 13.96 26.54 .550 1.045 17.42 28.89 .686 1.137 20.56 31.29 .809 1.232 23.66 33.69 .931 1.326 23.92 36.89 .942 1.452 25.52 40.00 1.005 1.575 32.00 43.29 1.260 1.704 Cable connecting receptacle with straight adapter solder 01 A crimp 01 RA shell size HE 301 B 01 A 08 HE 301 B 01 RA 10 12 L P 14 K oD oA oG 16 18 20 B C oF 22 24 22 13 41.00 12.03 1.614 .474 .417 41.00 15.01 10.60 .591 .417 41.00 19.07 1.614 10.60 .751 .417 41.00 22.25 1.614 10.60 .876 .417 41.00 25.42 1.614 10.60 1.001 .417 41.00 28.60 1.614 10.60 1.126 .417 44.00 31.77 1.614 13.85 1.251 .545 44.00 34.95 1.732 13.85 1.376 .545 44.00 38.12 1.732 14.70 1.732 1.501 .579 G Max K P Threading UNEF 2 A Max 1/2 28 20.99 24.24 9.10 .571 .954 .358 .826 2.10 18.70 27.44 12.08 5/8 24 24.19 .083 .736 1.080 .476 .952 2.10 21.70 .083 29.79 15.25 3/4 20 26.54 .854 1.173 .600 1.045 2.10 25.10 .083 32.10 18.15 7/8 20 28.89 .988 1.264 .715 1.137 2.10 28.13 .083 34.59 21.32 1-20 31.29 .839 1.232 1.107 1.362 2.10 31.38 .083 36.94 1.235 1.454 2.65 34.30 .083 40.15 1.350 1.581 2.65 37.60 .104 42.24 1.480 1.663 2.65 40.70 .104 46.44 .104 1.602 1.828 24.32 1-3/16 18 33.69 .957 1.326 26.73 1-3/16 18 36.89 1.052 1.452 30.67 1-7/16 18 40.00 1.207 1.575 33.08 1-7/16 l8 43.29 1.302 1.704 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 23 851 Series Cable connecting receptacle with straight backshell for heatshrink sleeving solder 01 T crimp 01 RT shell L Max size solder crimp 08 10 12 P L 14 oD oA oG 16 18 20 M B oF C 22 24 A B Max 36.70 36.00 12.03 10.60 1.445 1.417 .474 .417 36.70 36.00 15.01 10.60 1.445 1.417 .591 .417 36.70 36.00 19.07 10.60 1.445 1.417 .751 .417 36.70 36.00 22.25 10.60 1.445 1.417 .876 .417 39.00 38.30 25.42 10.60 1.535 1.508 1.001 .417 39.00 38.30 28.60 10.60 1.535 1.508 1.126 .417 45.30 44.20 31.77 13.85 1.783 1.740 1.251 .545 45.30 44.20 34.95 13.85 1.783 1.740 1.376 .545 44.00 42.60 38.12 14.70 1.732 1.677 1.501 .579 C Max D Max F G Max Max solder crimp P Max M Max 3.70 2.10 15.35 24.24 7.20 6.70 20.99 .083 .283 .264 .604 .826 .146 2.10 18.15 27.44 10.20 9.40 24.19 3.70 .083 .370 .952 .146 2.10 23.45 29.70 13.20 11.95 26.54 3.70 .083 .715 .954 .402 1.045 .146 2.10 24.25 32.10 16.10 15.15 28.89 3.70 .083 .923 1.080 .520 1.137 .146 3.70 .634 1.232 .146 3.70 .758 1.326 .146 3.70 .839 1.452 .146 3.70 1.504 1.581 .785 2.65 38.20 42.24 27.50 25.55 40.00 .104 1.411 1.454 .711 2.65 35.85 40.15 24.40 23.05 36.89 .104 1.250 1.362 .596 2.10 31.75 36.94 21.30 19.95 33.69 .083 1.163 1.264 .470 2.10 29.55 34.59 19.25 18.05 31.29 .083 .955 1.169 1.575 .146 3.70 .104 .146 1.828 1.083 .907 2.65 41.30 46.44 30.60 28.65 43.29 1.626 1.663 .961 1.205 1.006 1.128 1.704 Cable connecting receptacle with removable straight backshell for heatshrink sleeving solder 01 M crimp 01 RM shell size 08 10 12 L P 14 B oD oA oG 16 18 20 oF M C 22 24 L Max A solder crimp 50.00 12.03 1.969 B Max C Max D Max F Max 10.60 2.10 13.55 .474 .417 50.00 15.01 10.60 .591 .417 50.00 19.07 1.969 10.60 .751 .417 50.00 22.25 1.969 10.60 .876 .417 50.00 25.42 1.969 10.60 1.001 .417 50.00 28.60 1.969 10.60 1.126 .417 53.30 31.77 1.969 13.85 1.251 .545 53.30 34.95 2.098 13.85 1.376 .545 53.30 38.12 2.098 14.70 2.098 1.501 .579 G Max P Max M Max 3.50 24.24 7.05 20.99 .533 .954 .278 .826 .138 2.10 15.35 27.44 9.90 24.19 3.50 .083 .604 1.080 .390 .952 .138 2.10 19.48 .083 29.79 12.60 26.54 3.50 .767 1.173 .496 1.045 .138 2.10 21.30 .083 32.10 15.90 28.89 3.50 .839 1.264 .626 1.137 .138 2.10 24.50 .083 34.59 18.95 31.29 3.50 .965 1.362 .746 1.232 .138 2.10 26.45 .083 36.94 20.90 33.69 3.50 1.041 1.454 .823 1.326 .138 2.65 30.75 .083 40.15 23.70 36.89 3.50 1.211 1.581 .933 1.452 .138 2.65 34.24 .104 42.24 26.60 40.00 3.50 1.348 1.663 1.047 1.575 .138 2.65 36.47 .104 46.44 29.30 43.29 3.50 1.154 1.704 .138 .104 1.436 1.828 B Max C Max D Max F Max 10.60 2.10 18.25 Cable connecting receptacle with removable straight backshell for screen termination and heatshrink sleeving (38 and 42 suffix) solder 01 T crimp 01 RT shell size 08 10 L P 12 16 oD oG oA 14 18 B C M oF 20 22 24 L Max A solder crimp 51.60 12.03 2.031 .474 .417 51.60 15.01 10.60 .591 .417 51.60 19.07 2.031 10.60 .751 .417 51.60 22.25 2.031 10.60 .876 .417 51.60 25.42 2.031 10.60 1.001 .417 52.00 28.60 2.031 10.60 1.126 .417 55.10 31.77 2.047 13.85 1.251 .545 55.10 34.95 2.169 13.85 1.376 .545 55.10 38.12 2.169 14.70 2.169 1.501 .579 G Max 24.24 7.45 .719 .954 .293 2.10 20.25 27.44 9.00 .083 .797 1.080 .354 2.10 24.75 .083 29.79 13.30 .974 1.173 .524 2.10 27.75 .083 32.10 16.50 1.093 1.264 .650 2.10 30.05 .083 34.59 18.50 1.183 1.362 .728 2.10 34.15 .083 36.94 21.90 1.344 1.454 .862 2.65 37.25 .083 40.15 25.10 1.467 1.581 .988 2.65 40.45 .104 42.24 28.20 1.593 1.663 1.110 2.65 43.65 .104 46.44 31.40 1.828 1.236 .104 1.719 M Max P Max 3.70 20.99 .146 .826 3.70 24.19 .146 .952 3.70 26.54 .146 1.045 3.70 28.89 .146 1.137 3.70 31.29 .146 1.232 3.70 33.69 .146 1.326 3.70 36.89 .146 1.452 3.70 40.00 .146 1.575 3.70 43.29 .146 1.704 23 14 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 24 851 Series Cable connecting receptacle with removable straight backshell for screen termination and heatshrink sleeving solder 01 G crimp 01 RG shell size 08 10 12 L P 14 oD oG oA 16 18 20 B C oF M 22 24 L Max A solder crimp 54.00 12.03 2.126 B Max C Max D Max F Max 10.60 2.10 16.30 .474 .417 54.00 15.01 10.60 .591 .417 54.00 19.07 2.126 10.60 .751 .417 54.00 22.25 2.126 10.60 .876 .417 54.00 25.42 2.126 10.60 1.001 .417 54.00 28.60 2.126 10.60 1.126 .417 59.30 31.77 2.126 13.85 1.251 .545 59.30 34.95 2.335 13.85 1.376 .545 59.30 38.12 2.335 14.70 2.335 1.501 .579 G Max M Max 24.24 7.45 .642 .954 .293 2.10 18.30 27.44 10.30 .083 .720 1.080 .406 2.10 22.30 .083 29.79 13.20 .878 1.173 .520 2.10 25.30 .083 32.10 16.50 .996 1.264 .650 2.10 28.30 .083 34.59 19.35 1.114 1.362 .762 2.10 32.30 .083 36.94 21.60 1.272 1.454 .850 2.65 34.30 .083 40.15 24.80 1.350 1.581 .976 2.65 38.30 .104 42.24 27.90 1.508 1.663 1.098 2.65 41.30 .104 46.44 31.00 .104 1.626 1.828 1.220 B Max C Max D Max F Max min 10.60 2.10 14.40 P Max 3.60 20.99 .142 .826 3.60 24.19 .142 .952 3.60 26.54 .142 1.045 3.60 28.89 .142 1.137 3.60 31.29 .142 1.232 3.60 33.69 .142 1.326 3.60 36.89 .142 1.452 3.60 40.00 .142 1.575 3.60 43.29 .142 1.704 Max P Max Cable connecting receptacle with straight sealing gland backshell solder 01 J shell size HE 301 B 01 J 08 10 12 L P 14 B oD oG oA 16 18 20 oF C 22 24 L Max solder A 47.60 12.03 1.874 .474 .417 47.60 15.01 10.60 .591 .417 48.70 19.07 1.874 10.60 .751 .417 53.50 22.25 1.917 10.60 .876 .417 59.00 25.42 2.106 10.60 1.001 .417 65.00 28.60 2.323 10.60 1.126 .417 79.10 31.77 2.559 13.85 1.251 .545 80.00 34.95 3.114 13.85 1.376 .545 90.00 38.12 3.150 14.70 3.543 1.501 .579 G 24.24 5.02 .567 .954 .198 2.10 17.60 27.44 5.94 .083 .693 1.080 2.10 21.10 .083 29.79 .831 1.173 2.10 24.40 .083 32.10 .961 1.264 2.10 27.60 .083 34.59 1.087 1.362 2.10 30.80 .083 36.94 1.213 1.454 2.65 34.10 .083 40.15 1.343 1.581 2.65 37.30 .104 42.24 1.469 1.663 2.65 40.50 .104 46.44 .104 1.594 1.828 .234 5.84 20.99 .230 .826 6.76 24.19 .266 .952 9.34 10.16 26.54 .368 .400 1.045 11.32 12.14 28.89 .446 .478 1.137 14.73 15.55 31.29 .580 .612 1.232 16.00 16.82 33.69 .630 .662 1.326 16.89 17.71 36.89 .665 .697 1.452 17.78 18.60 40.00 .700 .732 1.575 20.34 21.16 43.29 .801 .833 1.704 Max P Max Cable connecting receptacle with straight sealing gland and cable clamp backshell solder 01 JC shell size MS 3111 J 08 10 12 P L 14 B C oD oA oG 16 18 20 oF 22 24 24 15 L Max solder A 57.68 12.03 2.271 B Max C Max D Max F Max 10.60 2.10 19.90 .474 .417 57.68 15.01 10.60 .591 .417 61.24 19.07 2.271 10.60 .751 .417 66.01 22.25 2.411 10.60 .876 .417 74.75 25.42 2.599 10.60 1.001 .417 80.57 28.60 2.943 10.60 1.126 .417 91.69 31.77 3.172 13.85 1.251 .545 95.66 34.95 3.610 13.85 1.376 .545 101.22 38.12 3.766 14.70 3.985 1.501 .579 G min 24.24 5.02 .783 .954 .198 2.10 21.50 27.44 5.94 .083 .846 1.080 2.10 25.00 .083 29.79 .984 1.173 2.10 27.80 .083 32.10 1.094 1.264 2.10 29.40 .083 34.59 1.157 1.362 2.10 35.30 .083 36.94 1.390 1.454 2.65 35.30 .083 40.15 1.390 1.581 2.65 41.10 .104 42.24 1.618 1.663 2.65 42.40 .104 46.44 .104 1.669 1.828 .234 5.84 20.99 .230 .826 6.76 24.19 .266 .952 9.34 10.16 26.54 .368 .400 1.045 11.32 12.14 28.89 .446 .478 1.137 14.73 15.50 31.29 .580 .610 1.232 16.00 16.82 33.69 .630 .662 1.326 16.89 17.71 36.89 .665 .697 1.452 17.78 18.60 40.00 .700 .732 1.575 20.34 21.16 43.29 .801 .833 1.704 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 25 851 Series Plug with backnut solder 06 E shell size HE 301 B 06 E MS 3116 E 08 crimp 06 R HE 301 B 06 R MS 3126 E 10 12 L 14 oA 16 oD 18 20 22 24 L Max A Max D Max 32.00 19.05 13.50 1.260 .750 .531 32.00 21.80 16.70 solder crimp 32.54 1.281 32.54 1.281 1.260 .858 .657 32.54 32.00 26.15 19.90 1.281 1.260 1.030 .783 32.54 32.00 29.35 23.40 1.281 1.260 1.156 .921 32.54 32.00 32.50 26.60 1.281 1.260 1.280 1.047 32.54 32.00 35.30 29.60 1.281 1.260 1.390 1.165 33.30 32.10 38.85 32.70 1.311 1.264 1.530 1.287 33.30 32.10 42.05 36.00 1.311 1.264 1.656 1.417 33.30 32.10 45.10 39.10 1.311 1.264 1.776 1.539 Plug with straight cable clamp solder 06 EC 06 AC crimp 06 RC shell size HE 301 B 06 EC MS 3116 F HE 301 B 06 AC 08 10 HE 301 B 06 RC MS 3126 F VG 95328 K 12 14 L oA 16 D oG 18 20 22 24 L Max solder crimp A Max D Max G 3.50 48.00 47.30 19.05 19.90 1.890 1.862 .750 .783 .138 48.00 47.30 21.80 21.50 5.00 1.890 1.862 .858 .846 .197 48.00 47.30 26.15 25.00 8.20 1.890 1.862 1.030 .984 .323 48.00 47.30 29.35 27.80 10.00 1.890 1.862 1.156 1.094 .394 51.00 50.50 32.50 29.40 13.00 2.008 1.988 1.280 1.157 .512 51.00 50.50 35.30 35.30 16.00 2.008 1.988 1.390 1.390 .630 52.00 50.20 38.85 35.30 16.00 2.047 1.976 1.530 1.390 .630 52.00 50.20 42.05 41.10 19.30 2.047 1.976 1.656 1.618 .760 52.00 50.20 45.10 42.40 20.60 2.047 1.976 1.776 1.669 .811 Plug with straight backshell for potting solder 06 P shell size HE 301 B 06 P MS 3116 P 08 crimp HE 301 B 06 RP MS 3126 P 10 12 L oA 14 oD 16 oG 06 RP 18 20 22 24 L Max solder crimp A Max D Max G Max 10.46 36.20 42.10 19.05 15.34 1.425 1.657 .750 .604 .412 36.20 42.10 21.80 17.70 13.55 1.425 1.657 .858 .697 .533 36.20 42.10 26.15 21.69 13.96 1.425 1.657 1.030 .854 .550 36.20 42.10 29.35 23.90 17.42 1.425 1.657 1.156 .941 .686 36.20 42.10 32.50 27.00 20.56 1.425 1.657 1.280 1.063 .809 37.70 45.40 35.30 30.50 23.66 1.484 1.787 1.390 1.201 .931 42.40 50.00 38.85 33.65 23.92 1.669 1.969 1.530 1.325 .942 42.40 50.00 42.05 37.10 25.52 1.669 1.969 1.656 1.461 1.005 42.85 50.00 45.10 40.00 32.00 1.687 1.969 1.776 1.575 1.260 25 16 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 26 851 Series Plug with straight adapter solder 06 A crimp 06 RA L Max solder crimp shell size HE 301 B 06 A L 41.00 19.05 14.50 9.10 1.614 .750 .571 .358 10 41.00 41.00 21.80 18.70 12.08 1.614 1.614 .858 .736 .476 12 41.00 41.00 26.15 21.70 15.25 1.614 1.614 1.030 .854 .600 14 41.00 41.00 29.35 25.10 18.15 1.614 1.614 1.156 .988 .715 16 41.00 41.00 32.50 28.13 21.32 1.614 1.614 1.280 1.107 .839 18 41.00 41.00 35.30 31.38 24.32 1.614 1.614 1.390 1.235 .957 20 44.00 43.30 38.85 34.30 26.73 1.732 1.705 1.530 1.350 1.052 22 44.00 43.30 42.05 37.60 30.67 1.732 1.705 1.656 1.480 1.207 24 44.00 43.50 45.10 40.70 33.08 1.732 1.713 1.776 1.602 1.302 OD K G Max 1.614 OA OG D Max 41.00 08 HE 301 B 06 RA A Max K Threading UNEF 2 A 1/2 28 5/8 24 3/4 20 7/8 20 1-20 1-3/16 18 1-3/16 18 1-7/16 18 1-7/16 18 Plug with straight backshell for heatshrink sleeving solder 06 T crimp 06 RT shell size L Max solder crimp 08 VG 95328 J 10 12 L oA 14 oD oG 16 18 20 M 22 24 A D Max G Max solder crimp M Max 36.70 36.00 19.05 15.35 7.20 6.70 1.445 1.417 .750 .604 .283 .264 3.70 .146 36.70 36.00 21.80 18.15 10.20 9.40 3.70 1.445 1.417 .858 .715 .402 .370 .146 36.70 36.00 26.15 23.45 13.20 11.95 3.70 1.445 1.417 1.030 .923 .520 .470 .146 36.70 36.00 29.35 24.25 16.10 15.15 3.70 1.445 1.417 1.156 .955 .634 .596 .146 39.00 38.30 32.50 29.55 19.25 18.05 3.70 1.535 1.508 1.280 1.163 .758 .711 .146 39.00 38.30 35.30 31.75 21.30 19.95 3.70 1.535 1.508 1.390 1.250 .839 .785 .146 44.00 42.90 38.85 35.85 24.40 23.05 3.70 1.732 1.689 1.530 1.411 .961 .907 .146 44.00 42.90 42.05 38.20 27.50 25.55 3.70 1.732 1.689 1.656 1.504 1.083 1.006 .146 42.70 41.60 45.10 41.30 30.60 28.65 3.70 1.681 1.638 1.776 1.626 1.205 1.128 .146 Plug with removable straight backshell for heatshrink sleeving solder 06 M crimp 06 RM shell size 08 10 12 L oA 14 oD oG 16 18 20 M 22 24 26 17 L Max solder/crimp A Max D Max G Max M Max 50.00 19.05 13.55 7.05 1.969 .750 .533 .278 .138 50.00 21.80 15.35 9.90 3.50 3.50 1.969 .858 .604 .390 .138 50.00 26.15 19.48 12.60 3.50 1.969 1.030 .767 .496 .138 50.00 29.35 21.30 15.90 3.50 1.969 1.156 .839 .626 .138 50.00 32.50 24.50 18.95 3.50 1.969 1.280 .965 .746 .138 50.00 35.30 26.45 20.90 3.50 1.969 1.390 1.041 .823 .138 52.00 38.85 30.73 23.70 3.50 2.047 1.530 1.210 .933 .138 52.00 42.05 34.24 26.60 3.50 2.047 1.656 1.348 1.047 .138 52.00 45.10 36.47 29.30 3.50 2.047 1.776 1.436 1.154 .138 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 27 851 Series Plug with straight sealing gland backshell solder 06 J shell size HE 301 B 06 J 08 10 12 L oA 14 oD oG 16 18 20 22 24 L Max solder A Max D Max G 47.60 19.05 14.40 5.02 1.874 .750 .567 .198 .230 47.60 21.80 17.60 5.94 6.76 min Max 5.84 1.874 .858 .693 .234 .266 49.20 26.15 21.10 9.34 10.16 1.937 1.030 .831 .368 .400 54.00 29.35 24.40 11.32 12.14 2.126 1.156 .961 .446 .478 59.60 32.50 27.60 14.73 15.55 2.346 1.280 1.087 .580 .612 65.60 35.30 30.80 16.00 16.80 2.583 1.390 1.213 .630 .661 78.00 38.85 34.10 16.89 17.71 3.071 1.530 1.343 .665 .697 79.50 42.05 37.30 17.78 18.60 3.130 1.656 1.469 .700 .732 90.00 45.10 40.50 20.34 21.16 3.543 1.776 1.594 .801 .833 Plug with straight sealing gland and cable clamp backshell solder 06 JC shell size MS 3116 J 08 10 12 L oA 14 oD oG 16 18 20 22 24 L Max solder A Max D Max G 57.68 19.05 19.90 5.02 2.271 .750 .783 .198 .230 57.68 21.80 21.50 5.94 6.76 min Max 5.84 2.271 .858 .846 .234 .266 61.24 26.15 25.00 9.34 10.16 2.411 1.030 .984 .368 .400 66.01 29.35 27.80 11.32 12.14 2.599 1.156 1.094 .446 .478 74.75 32.50 29.40 14.73 15.50 2.943 1.280 1.157 .580 .610 80.57 35.30 35.30 16.00 16.82 3.172 1.390 1.390 .630 .662 91.69 38.85 35.30 16.89 17.71 3.610 1.530 1.390 .665 .697 95.66 42.05 41.10 17.78 18.60 3.766 1.656 1.618 .700 .732 101.22 45.10 42.40 20.34 21.16 3.985 1.776 1.669 .801 .833 Plug with elbow cable clamp backshell shell size HE 301 B 08 EC 08 HE 301 B 08 RC 10 oA L 12 14 16 18 R solder 08 EC crimp 08 RC 20 oG D 22 24 L Max solder/crimp A Max D Max G R Max 50.10 19.05 19.70 3.50 16.00 1.972 .750 .776 .138 .630 52.60 21.80 21.20 5.00 18.00 2.071 .858 .835 .197 .709 54.90 26.15 24.20 8.20 19.50 2.161 1.030 .953 .323 .768 58.50 29.35 27.50 10.00 22.00 2.303 1.156 1.083 .394 .866 60.80 32.50 29.10 13.00 23.50 2.394 1.280 1.146 .512 .925 65.00 35.30 35.70 16.00 25.00 2.559 1.390 1.406 .630 .984 69.10 38.85 35.70 16.00 26.50 2.720 1.530 1.406 .630 1.043 71.00 42.05 39.70 19.30 28.00 2.795 1.656 1.563 .760 1.102 75.50 45.10 43.50 20.60 31.00 2.972 1.776 1.713 .811 1.220 27 18 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 28 851 Series Screened plug with straight adapter solder 36 A crimp 36 RA shell size 08 VG 95328 N 10 12 L 14 OA 18 OD K OG 16 20 22 24 L Max solder/crimp A Max D Max G Max 41.00 19.05 14.50 9.10 1.614 .750 .571 .358 41.00 21.80 18.70 12.08 1.614 .858 .736 .476 41.00 26.15 21.70 15.25 1.614 1.030 .854 .600 41.00 29.35 25.10 18.15 1.614 1.156 .988 .715 41.00 32.50 28.13 21.32 1.614 1.280 1.107 .839 41.00 35.30 31.38 24.32 1.614 1.390 1.235 .957 43.30 38.85 34.30 26.73 1.705 1.530 1.350 1.052 43.30 42.05 37.60 30.67 1.705 1.656 1.480 1.207 43.50 45.10 40.70 33.08 1.713 1.776 1.602 1.302 G Max K threading UNEF 2 A 1/2 28 5/8 24 3/4 20 7/8 20 1-20 1-3/16 18 1-3/16 18 1-7/16 18 1-7/16 18 Screened plug with removable straight backshell for screen termination and heatshrink sleeving (38 and 42 suffix) solder 36 T crimp 36 RT shell size 08 10 12 L OA 14 OD OG 16 18 20 M 22 24 28 19 L Max solder/crimp A Max D Max M Max 51.60 19.05 18.25 7.45 2.031 .750 .719 .293 .146 51.60 21.80 20.25 9.00 3.70 3.70 2.031 .858 .797 .354 .146 51.60 26.15 24.75 13.30 3.70 2.031 1.030 .974 .524 .146 51.60 29.35 27.75 16.50 3.70 2.031 1.156 1.093 .650 .146 51.60 32.50 30.05 18.50 3.70 2.031 1.280 1.183 .728 .146 52.00 35.30 34.15 21.90 3.70 2.047 1.390 1.344 .862 .146 53.90 38.85 37.25 25.10 3.70 2.122 1.530 1.467 .988 .146 53.90 42.05 40.45 28.20 3.70 2.122 1.656 1.593 1.110 .146 53.90 45.10 43.65 31.40 3.70 2.122 1.776 1.719 1.236 .146 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 29 851 Series Screened plug with removable straight backshell for screen termination and heatshrink sleeving solder 36 G crimp 36 RG L Max solder/crimp A Max D Max 54.00 19.05 16.30 7.45 2.126 .750 .642 .293 .142 54.00 21.80 18.30 10.30 3.60 shell size 08 VG 95328 M 10 12 L OA 14 OG OD 16 18 20 M 22 G Max M Max 3.60 2.126 .858 .720 .406 .142 54.00 26.15 22.30 13.20 3.60 2.126 1.030 .878 .520 .142 54.00 29.35 25.30 16.50 3.60 2.126 1.156 .996 .650 .142 54.00 32.50 28.30 19.35 3.60 2.126 1.280 1.114 .762 .142 54.00 35.30 32.30 21.60 3.60 2.126 1.390 1.272 .850 .142 58.00 38.85 34.30 24.80 3.60 2.283 1.530 1.350 .976 .142 58.00 42.05 38.30 27.90 3.60 2.283 1.656 1.508 1.098 .142 58.00 45.10 41.30 31.00 3.60 2.283 1.776 1.626 1.220 .142 solder/crimp A Max B Max C Max D threading PE 08 - - - - - 10 - - - - 11 24 Plug with straight adapter for electrical pitch access L Max shell size solder 06 Z crimp 06 RZ 12 14 L 43.00 26.15 9.00 24.80 1.693 1.030 .354 .976 45.00 29.35 11.00 28.80 1.772 1.156 .433 1.134 45.00 32.50 11.00 30.80 1.772 1.280 .433 1.213 46.00 35.30 12.00 40.80 1.811 1.390 .472 1.606 46.50 38.85 12.00 40.80 1.831 1.530 .472 1.606 46.50 42.05 12.00 40.80 1.831 1.656 .472 1.606 65.50 45.10 31.40 45.00 2.579 1.776 1.236 1.772 OA B 16 D OC 18 20 22 24 16 16 21 21 21 29 Screened plug with lock finger and short backshell for screen termination and heatshrink sleeving solder 76 U crimp 76 RU L 2.8/0.098 min shell size L Max 08 10 12 OA OE 14 OD OG H D Max H Max G Max E Max M Max - - - - - - - - - - - - - - 35.60 25.00 22.50 32.00 13.20 19.50 3.70 1.402 .984 .886 1.260 .520 .768 .146 35.60 29.00 25.50 32.00 16.10 21.00 3.70 1.402 1.142 1.004 1.260 .634 .827 .146 35.60 32.00 28.50 32.00 19.25 22.50 3.70 1.402 1.260 1.122 1.260 .758 .886 .146 18 - - - - - - - 20 - - - - - - - 22 - - - - - - - 24 - - - - - - - 16 M A Max solder crimp 29 20 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 30 851 Series Hermetic connectors shell size square flange receptacle 02 H HE 301 B 02 H 08 10 12 H C F 14 M C E OG OA 16 N 4 Holes OJ 18 E 20 OD 22 24 shell size jam nut receptacle HE 301 B 07 H 07 H MS 3114 H VG 95328 F 08 10 12 L C 14 C P OA 16 18 20 G Oext du filetage M OD 22 24 shell size solder fixing receptacle HE 301 B 1 H IH MS 3113 H VG 95328 G 08 10 12 H F 14 OD 18 OG OA 16 20 M N 22 24 30 21 A C Max D Max E F G 12.03 21.42 27.09 15.09 13.84 14.27 H Max J M Max N Max 6.97 3.13 11.24 .562 .274 .123 .443 .066 15.01 24.62 31.87 18.26 13.84 17.06 6.97 3.13 11.24 1.67 .474 .843 1.067 .591 .969 1.255 .594 .672 .274 .123 .443 .066 6.97 3.13 11.24 1.67 .781 .274 .123 .443 .066 22.25 29.36 38.22 23.00 13.84 23.00 6.97 3.13 11.24 1.67 .876 1.156 1.505 .812 .545 1.67 19.07 26.98 35.04 20.62 13.84 19.85 .751 1.062 1.380 .719 .545 .906 .274 .123 .443 .066 25.42 31.73 41.39 24.61 13.84 26.18 6.97 3.13 11.24 1.67 1.001 1.249 1.630 .906 .545 .969 .545 .545 1.031 .274 .123 .443 .066 28.60 34.12 44.57 26.97 13.84 29.36 6.97 3.13 11.24 1.67 .545 1.156 .274 .123 .443 .066 31.77 37.20 47.74 29.36 15.42 31.74 1.126 1.343 1.755 1.062 6.99 3.13 12.00 2.48 .607 1.250 .275 .123 .472 .098 34.95 40.47 50.92 31.75 16.23 34.92 1.251 1.465 1.880 1.156 6.99 3.13 12.00 2.48 .639 1.375 .275 .123 .472 .098 38.12 43.66 55.69 34.92 17.04 38.10 1.376 1.593 2.005 1.250 6.19 3.81 12.81 2.48 1.501 1.719 2.193 1.375 .244 .150 .098 .671 1.500 .504 A C Max D Max G L Max M Max P 12.03 24.07 27.37 14.26 20.53 17.93 13.33 .474 .948 1.078 .561 .808 .706 .525 15.01 27.22 30.57 17.43 20.53 17.93 16.51 .591 1.072 1.204 .686 .808 .706 .650 19.07 32.00 35.32 22.19 20.53 17.93 20.63 .751 1.260 1.391 .874 .808 .706 .812 22.25 35.17 38.50 25.36 20.53 17.93 23.78 .876 1.385 1.516 .998 .808 .706 .936 25.42 38.35 41.67 28.54 20.53 17.93 26.93 1.001 1.510 1.641 1.124 .808 .706 1.060 28.60 41.52 44.85 31.71 20.53 17.93 30.10 1.126 1.635 1.766 1.248 .808 .706 1.185 31.77 46.27 49.62 34.89 26.10 22.70 33.28 1.251 1.822 1.954 1.374 1.028 .894 1.310 34.95 49.47 52.77 38.06 26.10 22.70 36.45 1.376 1.948 2.078 1.498 1.028 .894 1.435 38.12 52.62 55.97 41.24 26.93 23.54 39.63 1.501 2.072 2.204 1.624 1.060 .927 1.560 A D Max H Max F G Max M Max 12.03 16.40 8.19 13.84 14.27 10.69 .474 .646 .322 .545 .562 .421 .030 15.01 19.40 8.19 13.84 17.06 10.69 0.76 N Max 0.76 .591 .764 .322 .545 .672 .421 .030 19.07 21.80 8.19 13.84 19.83 10.69 0.76 .751 .858 .322 .545 .781 .421 .030 22.25 25.00 8.19 13.84 23.00 10.69 0.76 .876 .984 .322 .545 .906 .421 .030 25.42 28.10 8.19 13.84 26.18 10.69 0.76 1.001 1.106 .322 .545 1.031 .421 .030 28.60 31.30 8.19 13.84 29.36 10.69 0.76 1.126 1.232 .322 .545 1.156 .421 .030 31.77 33.70 8.16 15.42 31.74 12.32 0.76 1.251 1.327 .321 .607 1.250 .485 .030 34.95 36.90 8.16 16.23 34.92 12.32 0.76 1.376 1.453 .321 .639 1.375 .485 .030 38.12 40.10 7.36 17.04 38.10 13.12 0.76 1.501 1.579 .290 .671 1.500 .517 .030 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 31 851 Series Wire wrap and straight spills connectors Square flange receptacle type 02 E shell size wire wrap version 08 E L 4 Holes OJ 10 F OA OD H 12 14 B C 16 straight spills version E L 18 4 Holes OJ 20 7 mini B F OD OA T 22 C 24 A B Max 12.03 11.70 .474 .461 15.01 11.70 .591 .461 19.07 11.70 .751 .461 22.25 11.70 .876 .461 C Max OD Max E F Max J H +1,63 / 0 L Max T +1,25 / 0 1.32 10.84 15.09 20.99 12.42 3.13 20.50 9.46 .052 .123 .807 .372 1.32 13.99 18.26 24.19 12.42 3.13 20.50 9.46 .052 .123 .427 .551 .594 .826 .807 .372 1.32 17.37 20.62 26.54 12.42 3.13 20.50 9.46 .052 .123 .807 .372 1.32 20.57 23.00 28.89 12.42 3.13 20.50 9.46 .052 .123 .684 .810 .719 .952 .489 .812 1.045 .906 1.137 .489 .489 .489 .807 .372 25.42 11.70 1.32 23.62 24.61 31.29 12.42 3.13 20.50 9.46 1.001 .052 .123 .807 .372 9.46 .461 .930 .969 1.232 .489 28.60 11.70 1.32 26.69 26.97 33.69 12.42 3.13 20.50 1.126 .052 1.051 1.062 1.326 .123 .461 .489 .807 .372 31.77 14.35 2.15 29.89 29.36 36.89 10.69 3.13 23.80 7.76 1.251 .085 1.177 1.156 1.452 .123 .937 .306 7.76 .565 .421 34.95 14.35 2.15 33.04 31.75 39.99 10.69 3.13 23.80 1.376 .085 1.301 1.250 1.574 .123 .565 .421 .937 .306 38.12 15.20 2.15 36.24 34.92 43.15 10.69 3.81 23.80 7.76 1.501 .085 1.427 1.375 1.699 .150 .306 .598 .421 .937 Jam nut receptacle type 07 A shell size wire wrap version 08 P L 10 S OA H 12 14 C B OF 16 straight spills version A B Max C Max F Max +1,63 / 0 L Max P Max S Max 12.03 17.90 2.64 26.94 12.42 20.64 19.29 23.94 .474 .705 .104 1.061 .489 .813 .759 .943 .372 15.01 17.90 2.64 30.14 12.42 20.64 22.38 26.95 9.46 .591 .705 .104 1.187 .489 .813 .881 1.061 .372 19.07 17.90 2.64 34.94 12.42 20.64 27.13 31.74 9.46 .751 .705 .104 1.376 .489 .813 1.068 1.250 .372 22.25 17.90 2.64 38.04 12.42 20.64 30.33 34.94 9.46 .876 .705 .104 1.498 .489 .813 1.194 1.376 .372 25.42 17.90 2.64 41.26 12.42 20.64 33.48 38.24 9.46 1.001 .705 .104 1.624 .489 .813 1.318 1.506 .372 28.60 17.90 2.64 44.44 12.42 20.64 36.68 41.34 9.46 1.126 .705 .104 1.750 .489 .813 1.444 1.628 .372 31.77 22.45 3.44 49.14 8.64 25.99 39.83 46.04 8.49 1.251 .884 .135 1.935 .340 1.023 1.568 1.813 .334 34.95 22.45 3.44 52.24 8.64 25.99 43.03 49.24 8.49 1.376 .884 .135 2.057 .340 1.023 1.694 1.939 .334 38.12 23.30 3.44 55.54 7.79 26.84 46.18 52.74 7.79 1.501 .917 .135 2.187 .307 1.057 1.818 2.076 .307 H T +1,25 / 0 9.46 P L 18 T S OA 20 7 mini B C 22 OF 24 31 22 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 32 851 Series Caps Part numbers 8500 basic series shell size 8 02 10 part numbers for receptacle part numbers for plug cation 10 03 11 12 04 12 14 05 13 16 27 28 18 06 14 20 07 15 22 08 16 05 specifi- *** 24 09 17 for cap type and plating, see table below Type and plating receptacle cap Cap type plug cap olive green olive green black cadmium cadmium anodized nickel olive white black green cadmium anodized cadmium cap with chain and ring D 02 D 29 D 44 D D 02 D 29 D 44 D cap with nylon cord and ring B 02 B 29 B 44 B B 02 B 29 B 44 B cap with nylon cord and washer (shell 10, 12, 14, 16 and 18) - - - E - - - cap with nylon cord and washer H - 44 H - - - - cap with chain and washer J - - - - - - JQ7 - - - - - - M - - M - - - E OF - 14.00 cap 500hr salt spray Cap without chain Caps for plug B shell size 08 OA O3.5/ .138 10 C 12 D 14 16 B O3.5/ .138 OA 18 20 22 D 24 B&M - consult us OA B OF E 32 nickel E 23 OA Maxi B Maxi C D 16.80 19.84 132.00 128.00 .661 .781 5.197 5.039 19.80 19.84 132.00 128.00 132.00 .780 .781 5.197 5.039 5.197 .551 23.90 19.84 148.00 140.00 148.00 17.60 .941 .781 5.827 5.512 5.827 .693 27.00 19.84 148.00 140.00 148.00 20.80 1.063 .781 5.827 5.512 5.827 .819 30.20 19.84 148.00 140.00 148.00 25.60 148.00 28.70 - - - - - - 1.189 .781 5.827 5.512 33.40 19.84 148.00 140.00 1.315 .781 5.827 5.512 36.50 21.44 168.00 153.00 1.437 .844 6.614 6.024 39.80 21.44 168.00 153.00 1.567 .844 6.614 6.024 42.90 22.22 168.00 153.00 1.689 .875 6.614 6.024 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:21 Page 33 851 Series Caps for receptacle shell size B 08 OA O3.5/.138 10 C 12 D 14 16 B 18 OA O3.5/.138 20 D 22 24 B&M OA Max B Max C D J Max H K 19.00 21.44 84.00 77.00 14.80 80.00 84.00 .748 .844 3.307 3.031 .583 3.150 3.307 21.80 21.44 84.00 77.00 17.90 80.00 84.00 .858 .844 3.307 3.031 .705 3.150 3.307 26.10 21.44 100.00 89.00 22.70 90.00 100.00 1.028 .844 3.937 3.504 .894 3.543 3.937 29.30 21.44 100.00 89.00 25.90 90.00 100.00 1.154 .844 3.937 3.504 1.020 3.543 3.937 32.50 21.44 100.00 89.00 29.00 90.00 100.00 1.280 .844 3.937 3.504 1.142 3.543 3.937 35.30 21.44 100.00 89.00 32.20 90.00 100.00 1.390 .844 3.937 3.504 1.268 3.543 3.937 38.80 21.44 116.00 102.00 35.40 110.00 116.00 1.528 .844 4.567 4.016 1.394 4.331 4.567 42.00 21.44 116.00 102.00 38.60 110.00 116.00 1.654 .844 4.567 4.016 1.520 4.331 4.567 45.10 22.22 116.00 102.00 41.70 110.00 116.00 1.776 .875 4.567 4.016 1.642 4.331 4.567 B B OJ OA OA OJ H K J & JQ7 H Tools Crimping pliers contact sizes wire size mm2 AWG 20 0,93 0,60 0,38 0,21 18 20 22 24 16 1,91 1,34 0,93 14 16 18 part numbers crimping tool locator } 8476-01 (M 22520 / 2-01) 8365 (M 22520 / 1-01) 8476-02 (M 22520 / 2-02) 8365-02 (M 22520 / 1-02) } 8365 8365-02 (M 22520 / 1-02) (M 22520 / 1-01) Insertion and extraction tools contact type crimp part numbers contact size 20 16 20 for wire wrap 16 Square tube for tool : - 8500-36 A - 8500-38 A insertion tools extraction tools 8500-29 B * 8500-39 8500-31 or 8500-39 8500-37 8500-36 A 8500-38 A 8500-31 8500-37 PN : 8500-1163 PN : 8500-1486 021 * Except 8-2, 8-3, 8-4, 12-14 contact layouts : insertion tool 8500-93B Filler plug contact size part numbers colour 20 8500-4144 16 8500-479 blue 20 8500-4144 A (MS 3187 A 20) red 16 8500-4267 (MS 3187-16) blue profile grey 33 24 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:22 Page 34 851 Series Panel cut-out shell size square flange receptacle jam nut receptacle 08 10 OB P E OA OA 12 14 E X N 16 solder fixing receptacle 18 20 OC 22 24 Accessories A B C OA E M N Plastic protective caps for receptacle and plug Gaskets Shell gaskets for square flange receptacle E J N min Max P X min 2.90 15.55 14.60 14.70 15.10 3.15 1.57 3.17 13.75 .612 .575 .579 .594 .124 .062 .125 .541 .114 18.80 17.75 17.50 18.26 3.15 1.57 3.17 16.95 2.90 .740 .699 .689 .719 .124 .062 .125 .667 .114 22.15 22.50 20.20 20.62 3.15 1.57 3.17 21.50 2.90 .872 .886 .795 .812 .124 .062 .125 .846 .114 25.30 25.70 23.40 23.00 3.15 1.57 3.17 24.20 2.90 .996 1.012 .921 .906 .124 .062 .125 .953 .114 28.45 28.85 26.60 24.60 3.15 1.57 3.17 27.35 2.90 1.120 1.136 1.047 .969 .124 .062 .125 1.077 .114 31.65 32.05 29.80 26.97 3.15 1.57 3.17 30.55 2.90 1.246 1.262 1.173 1.062 .124 .062 .125 1.203 .114 34.80 35.20 32.10 29.36 3.15 1.57 6.35 33.70 5.50 1.370 1.386 1.264 1.156 .124 .062 .250 1.327 .217 38.00 38.40 35.30 31.75 3.15 1.57 6.35 36.90 5.50 1.496 1.512 1.390 1.250 .124 .062 .250 1.453 .217 41.20 41.55 38.40 34.92 3.73 1.57 6.35 40.05 5.50 1.622 1.636 1.512 1.375 .147 .062 .250 1.577 .217 Shell size Part Number 08 8500 - 18 10 8500 - 19 12 8500 - 20 14 8500 - 21 16 8500 - 26 18 8500 - 22 20 8500 - 23 22 8500 - 24 24 8500 - 25 Dummy receptacle 4 Holes OJ C A C Max 12.03 20.99 15.09 3.13 11.70 1.32 15.01 24.19 18.26 3.13 11.70 1.32 19.07 26.54 20.62 3.13 11.70 1.32 22.25 28.89 23.00 3.13 11.70 1.32 25.42 31.29 24.61 3.13 11.70 1.32 28.60 33.69 26.97 3.13 11.70 1.32 31.77 36.89 29.36 3.13 14.35 2.15 34.95 39.99 31.75 3.13 14.35 2.15 38.12 43.15 34.92 3.81 15.20 2.15 .474 .591 .751 .876 1.001 1.126 1.251 1.376 1.501 E .826 J .594 .952 .123 .719 1.045 .123 .812 1.137 .123 .906 1.232 .123 .969 1.326 .123 1.062 1.452 .123 1.156 1.574 .123 1.250 1.699 M Max .123 1.375 .150 .461 .461 .461 .461 .461 .461 .565 .565 Shell size caps for receptacle caps for plug 08 10 12 14 16 18 20 22 24 8500-5585A 8500-5586A 8500-5587A 8500-5588A 8500-5589A 8500-5590A 8500-5591A 8500-5592A 8500-5593A 8500-5594 8500-5595 8500-5596 8500-5597 8500-5598 8500-5599 8500-5600 8500-5601 8500-5602 .598 gaskets for jam nut receptacle size neoprene fairprene neoprene vitton (for hermetic receptacle) 8 10 12 14 16 18 20 22 24 8500-275 8500-276 8500-277 8500-278 8500-283 8500-279 8500-280 8500-281 8500-282 8500-4164 8500-4165 8500-4166 8500-4167 8500-4168 8500-4169 8500-4170 8500-4171 8500-4172 3330102 3330103 3330104 3330105 3330106 3330107 3330108 3330109 3330110 3330675 3330670 3330671 3330672 3331048 3331049 3331050 3331051 3331052 34 25 N Max .052 .052 .052 .052 .052 .052 .085 .085 .085 851 Series 10-35_typo_mod:Mise en page 1 24/02/2009 14:22 Page 35 851 Series SNC specific connectors and connection accessories Designation Part numbers Square flange through bulkhead, pins, sockets Shell size 8 to 24 EC 52 B Short profile 90 backshell with cable clamp for 08 RC plug Shell sizes 12, 14, 16, 18 and 22 SN 556 Plug and receptacle connector Shell size 24: contact layout = 3 contacts # 16, 7 contacts # 20, 1 coaxial contact 50 (for KX15 cable) SN 775 P SN 775 S Shunt plug SN 901 Straight two-piece backshell with sealing gland and cable strap Shell sizes 8, 10 and 16 SN 946 Plug with flanged coupling nut Shell sizes 20, 22 and 24 SN 1167 Cable connecting test connector, pins, sockets Shell sizes 8 to 24, arrangements with size contacts #20 SN 1206 Ring with lugs with cone-pointed grub screws fitting 851 plug Shell sizes 8 to 24 SN 1277 Elbow backshell with closing sleeve for shield termination by magnaforming Shell sizes 8 to 24 SN 1533 Jam nut receptacle with front release straight spills SN 0378 35 26