HITACHI KAOHSIUNG HITACHI ELECTRONICS Co.,LTD P.O. BOX 26-27 2,13TH EAST ST. K.E.P.Z. KAOHSIUNG TAIWAN R.O.C. TEL:(07) 821-581 1(7 LINE) FAX:(07) 821-5815 FOR MESSRS: DATE: Jun.04,2004 CUSTOMERS ACCEPTANCE SPECIFICATIONS SP14Q006-T CONTENTS No. ITEM SHEET No. PAGE 1 |COVER 7B64PS 2701- SP14Q006-T-5 [1-1/1 2 |RECORD OF REVISION 7BG64PS_2702-SP14Q006-T-5 [2-1/1 3 J|GENERAL SPECIFICATION 7B64PS_2703-SP14Q006-T-5 (3-1/1 4 |IABSOLUTE MAXIMUM RATINGS 7B64PS 2704-SP14Q006-T-5 = /4-1/1 5 [ELECTRICAL CHARACTERISTICS 7B64PS 2705- SP14Q006-T-5 [5-1/2~2/2 6 (OPTICAL CHARACTERISTICS 7B64PS 2706- SP14Q006-T-5 _|6-1/3~3/3 7 |BLOCK DIAGRAM 7B64PS 2707- SP14Q006-T-5 [7-1/1 8 |INTERFACE TIMING CHART 7B64PS 2708- SP14Q006-T-5 _[8-1/3~3/3 9 |OUTLINE DIMENSIONS 7B63PS 2709-SP14Q006-T-5 = 9-1/2 7B64PS_2709- SP14Q006-T-5 [9-2/2 10 JAPPEARANCE STANDARD 7B64PS_ 2710- SP14Q006-T-5 =| 10-1/3~3/3 11_|PRECAUTION IN DESIGN (B64PS 2711-SP14Q006-T-5 = /11-1/2~2/2 12 |DESIGNATION OF LOT MARK 7B64PS 2712-SP14Q006-T-5 [12-1/1 13. |PRECAUTION FOR USE 7B64PS 2713-SP14Q006-T-5 = |13-1/1 * When products will be discontinued , customers will twelve months prior announcement. be informed by HITACHI with ACCEPTED BY; PROPOSED BY; ~iww HO KAOHSIUNG HITACHI Sh. ELECTRONICS CO.,LTD. | No. 7B64PS 2701- SP14Q006-T-5 PAGE | 1-1/1RECORD OF REVISION DATE SHEET No. SUMMARY Jan.16,'03 |7B64PS 2705- [5.2 ELECTRICAL CHARACTERISTICS OF LED BACKLIGHT SP14Q006-T-2 PAGE 5 - 2/2 syMBOL| TyP. | MAX VLED | (TBD) - ILED 60 - Revised | SYMBOL | TYP. MAX VLED 5 5.2 ILED 160 - Oct.22,'03 |7B64PS2709- Changed LED I/F SP14Q006-T-3 JAE/1L-G-4S8-S3C2 JAE/IL-G-4S8-S3C2 Page 9-2/2 Mar.24,04 |7B64PS2708- 8.3 POWER ON/OFF TIMING SEQUENCE SP14Q006-T-4 (Revised tDLD min. 200 50 Page 8-3/3 Revised tCH max. 200 30 Jun.04,'04 |7R64Ps 2705- ~[5.1 ELECTRICAL CHARACTERISTICS sp14qo06-1-5 Added Page 5-1/2 ITEM SYMBOL} MIN. TYP. MAX Power Supply Voltage Logic VDD-VSSs 3.2 3.3 3.4 21.0 22.0 23.0 Recommend LC Driving Voltage| VDD-VO0 20.0 21.0 22.0 19.0 20.0 21.0 7B64PS 2706- [6.2 OPTICAL CHARACTERISTICS OF BACKLIGHT SP14Q006-T-5 [Added The LCD driving voltage should be adjusted at the Page 6-3/3 voltage where the peak contrast is obtained. 7B64PS 2710- {10.1 APPEARANCE INSPECTION CONDITION SP14Q006-T-5 Revised 45>25 Page 10-1/3 KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Sh. No 7B64PS 2702- SP14Q006-T-5 Jun.04,04 PAGE | 2-1/13. GENERAL SPECIFICATIONS (1) Part Name (2) (3) (4) (9) (6) (7) (8) Outer Dimensions Effective Area Dot Size Dot Pitch Dot Number (Resolution) Duty Ratio LCD Type (9) (10) Viewing Direction Viewing Angle (11) Backlight Type SP14Q006-T 167.0(W)mm109.0(H)mm10.0 (D) mm max. 120(W)mm min. x 89(H)mm min. 0.345(W)min. x 0.345(H)min. 0.360(W)mm x 0.360(H)mm 320 (W) 240 (H) dots 1/240 Transflective type F-B/W STN With anti-glare type upper polarizer 6 O'clock Viewing Angle in Rear ~- Front (12:00) (6:00) R-F=90 *(typ.) LED(Color : white) KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Jun.04,04 Sh. No. 7B64PS 2703- SP14Q006-T-5 |PAGE 3-1/14. ABSOLUTE MAXIMUM RATINGS Note 2: Note 3: Note 4: Note 5: 4.1 ELECTRICAL ABSOLUTE MAXIMUM RATINGS VSS=0V : STANDARD ITEM SYMBOL | MIN. MAX. UNIT} COMMENT Power Supply for Logic VDD-VSS 0 6.0 V Power Supply for LC Driving VDD-VEE 0 27.5 V Input Signal Voltage Mi -0.3 VDD+0.3 V_{(Note 1) Static Electricity VESDO - +100 V_|(Note 2,3,4) VESD1 - +10 kV |{Note 2,3,5) Note 1: DOFF , FLM , CL1 , CL2 , DO~D3. Make certain you are grounded when handling LCM. Energy storage capacitance 200pF , discharge resistance 250Q Ta=25C , 60%RH. Contact discharge to I/F connector pins. Contact discharge to front metal bezel. 4.2 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS ITEM OPERATING STORAGE COMMENT MIN. MAX. MIN. MAX. Ambient Temperature -20C 70C -30C 80C _|(Note 2,3,6) Humidity (Note 1} (Note 1) Without Condensation 2.45m/s* 11.76m/s* Vibration - (0.25G) - (1.2G) |(Note 4) Note 5 {1h max 29.4m/s* 490.0m/s* Shock - (3 G) - (50 G) |X- Y + Z Directions (Note 5) Corrosive Gas Note Acceptable |Note Acceptable Note 2 : Note 3: Noite 4: Noie 5: Note 6: Note 1: Ta=<40 : 85%RH max. Ta>40C : Absolute humidity must be lower than the humidity of 85%RH at 40C Ta at -30C ---< 48h, at 80C ---< 168h., Background color changes slightly depending on ambient temperature. This phenomenon is reversible. 5Hz~100Hz (Except resonance frequency) This module should be operated normally after finish the test. The response time willbe slower under low temperature. KAOHSIUNG HITACHI Sh. ELECTRONICS CO.,LTD. No. DATE} Jun.04,'04 7B64PS 2704- SP14Q006-T-5 |PAGE ; 4-1/15. ELECTRICAL CHARACTERISTICS 5.1 ELECTRICAL CHARACTERISTICS |1TEM SYMBOL CONDITION MIN. | TYP. | MAX. | UNIT | COMMENT Power Supply Voltage VDD-VSS _ 4.75 } 5.0 | 5.25 V for Logic 3.2 3.3 3.4 Power Supply Voltage VEE-VSS . -23.1 | -22.0} -20.9 for LC Driving H LEVEL Q.8VDD}_ - VDD V i Volt i Input Signal Voltage Vi | LEVEL 0 To2vpp! v (Note1) Power Supply Current VDD-VSS=5.0V for Logic IDD | VEE-VSS= -22.0V 6.0 mA | (Note2) Power Supply Current VDD-VSS=5.0V for LC Driving IEE | VEE-VSS= -22.0V 9.0 mA | (Note2) Ta= 0 , g=0 21.0 | 22.0} 23.0 V Aviving. Voltage Le vpb-vo | Ta=25, =0 | 200 | 21.0] 220 | v | (Notes) g Ta=50C ,=0 | 190 | 200] 210 | V Frame Frequency fFLM - 70 75 80 Hz (Note4) Note 1: DOFF , FLM , CL1 , CL2 , DO~D3. Note 2 : FLM=75Hz, test pattern is all Q. VDD-V0=21.0V , Ta=25C Note 3 : Recommended LC driving voltage may fluctuate about +1.0V by each module. Test pattern is all Q Note 4: Please set the frame frequency so as to avoid flicker and rippling on the display. KAOHSIUNG HITACHI Sh. 04; 7B64PS 2705- SP14006-T- 4/2 ELECTRONICS CO.,LTD.|PATE| 447% 97 Ino, 5 |PAGE| 5-1/5.2 ELECTRICAL CHARACTERISTICS OF LED BACKLIGHT ITEM SYMBOL | CONDITION | MIN. | TYP. | MAX. | UNIT | COMMENT Power Supply Voltage . _ for LED VLED 5.0 5.2 V Power Supply Current ey ; _ +t for LED ILED VLED=5.0V 160 mA (Note 1) Note 1: The ILED changes depending on ambient temperature. 5 E 2 8 30 & < 20 < 2 5 40 \N Ww fy 0 S 0 20 40 60 80 100 < AMBIENT TEMPERATURE(C) HS TACH Sh. KAOHSIUNG Hi | DATE} Jun.04,04 7B64PS 2705- SP14Q006-T-5 |PAGE| 5-2/2 ELECTRONICS CO.,LTD. No.6. OPTICAL CHARACTERISTICS Ta=25\U+2103 (Backlight off) 6.1 OPTICAL CHARACTERISTICS ITEM SYMBOL | CONDITION | MIN. | TYP. | MAX. | UNIT | NOTE . K220 @=0 _ 90 - deg 4 Viewing Area <a sree 7 ____bt+g2 - 80 7 deg. 1 Contrast Ratio K $=0", 6 =0 . 5 - . 2,3 Response Time (Rise) ir p=0", 8=0 - (336) - ms 4 Response Time (Fall) tf b=0", 8 =0 - (148) - ms 4 Note 1: Definition of @ and (Measure condition by HITACHI) (Normal) Viewing direction Note 2: Definition of viewing angle 1 and @ 2 K 61<0'<$2 2.0 1 2 Viewing Angle Contrast ratio K vs viewing angle REAR 12:00 LEFT RIGHT 9:00 3:00 FRONT 6:00 Note 3 : Definition of contrast"K" Brightness on non-selected dot (B1) = Brightness on selected dot (B2) (B1} Brightness Operating Voltage & Light Sensor BM? Distance=0.4m Backlight LCD KAOHSIUNG HITACHI ELECTRONICS Co.,LTD. |PATE Jun.04,'04 Sh. No. 7B64PS 2706-SP14Q006-T-5 PAGE 6-1/3Note 4 : Definition of optical response Non-selective state Selective state Non-selective state j = ee seen % x| 3 2 S| = 7 = 2 o m - tr tf Rise Time Fall Time KAOHSIUNG HITACHI \ Sh. ELECTRONICS CO.,LTD. DATE | Jun.04,'04 No. 7B64PS 2706-SP14Q006-T-5 | PAGE | 6-2/36.2 OPTICAL CHARACTERISTICS OF BACKLIGHT (Backlight ON) ITEM MIN. TYP. MAX. | UNIT NOTE Brightness 60 - cd/m? ILED=160mA Brightness Uniformity +30 % (Note 1) Ta=25C, Display data should be all ON. The LCD driving voltage should be adjusted at the voltage where the peak contrast is obtained. Note 1: Measure of the following 9 places on the display. Y=80 Y=1 60 Y=240 X=60 X=120 fat < why LJ Ty LS ea Ty SL fab A Ty F X=180 (1, NT iT, SL oy Y Definition of the brightness tolerance. ( Max. or Min. Brightness-Average Brightness Average Brightness ) x 100 KAOHSIUNG HITACHI ELECTRONICS Co.,LTD. DATE Jun.04,'04 Sh. No. 7B64PS 2706- SP14Q006-T-5 PAGE 6-3/37. BLOCK DIAGRAM 320 D3 D2 D1 DO X1 320x240 DOTS X240 * > TIMING CIRCUIT LED Back Light co oN => 7 LL. I I 23 ZO S B8ol FA a a >Sss Ga ! > > KAOHSIUNG HITACHI Sh. 04; 7B64PS$ 2707- SP14Q006-T-5 IPAGE| 7-1/4 ELECTRONICS CO.,LTD, [PATE] 47-04-04 | e8. INTERFACE TIMING CHART 8.1 INTERFACE TIMING CHART 52.1s<T<59.5ys ke mS LULU UL UU Ue x1 X2 D3 (iXvex XXX XK XY D2 (2XvexX XXX OX KK X_Y D1 YsXv7X X XX XK _X_) DO (vaxveX X XX XK BAK OX) wv CL1 CL2 at bas NO P io FLM _} ee | CL1 Lt, JL, ff 240xT | FLM zg a X Do~D3__ Xx Xx2X__KraseXUOX_X YAS KAOHSIUNG HITACHI Sh. DATE| Jun.04,'04 7B64PS 2708- SP14Q006-T-5 |PAGE | 8-1/3 ELECTRONICS CO.,LTD. No.8.2 TIMING CHARACTERISTICS ITEM SYMBOL | MIN. | TYP. | MAX. | UNIT CL2 frequency fCP - - 6.5 MHz CL2 pulse width tw 45 - - ns CL2 rise, fall time tr, tf - - 15 ns Data set up time tDSU 30 - - ns Data hold time tDHD 30 - - ns CL1 set up time tLSU 80 - - ns CL1 clock time tLC 120 - - ns FLM set up time tSETUP 100 - - ns FLM hold time tHOLD 100 - - ns CL1 pulse width twc 125 - - ns tw tw tr ie 0.8VDD 0.8VDD CL2 L0.2V0D 760.2VDD <0.2VDD tDSU tDHD - 0.8VDD o.8V0D 0.8VDD 0.8VDD tLSU tLC 0.8VDD _0.8VDD CL1 0.2VDD \ J o2von two tSETUP, tHOLD 0.8VDD 0.8VDD FLM KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Sh. 04, Jun.04,04 No. 7B64PS8 2708- SP14Q006-T-5 PAGE 8-2/38.3 POWER ON/OFF TIMING SEQUENCE tDLD {DLD VDD 0.95VDD 4~ S 0.95VDD tCH tCH NK 0.8VD0 XL Sy 0.8VDD SIGNAL MM GND iptecr ADLCf GND \ Y- VEE NL 4 tDLCs tDLCs DOFF Y 0.8VDD 0.8VDD fj Kloavon 0.2VDD | 5- GND ttpH tLDH tDOr tDOf SYMBOL MIN. MAX. UNIT COMMENT tDLD 50 - ms tCH 0 30 ms (Note 1) tLDH 0 - ms tDOr - 100 ns tDOT - 100 ns tDLCr 0 - ms (Note 2) tDLCf 0 - ms {DLCs 20 - ms Note 1: Please keep the specified sequence because wrong sequence may cause permanent damage to the LCD panel. Note 2: HITACHI recommends you to use DOFF function. Display quality may deteriorate if you dont use DOFF function. 8.4 POWER SUPPLY FOR LCM (EXAMPLE) VDD LCM VSS | VO VEE Note 1: VR: 10kQ KAOHSIUNG HITACHI Sh. 04, 7B64PS 2708- SP14Q006-T-5 |PAGE | 8- ELECTRONICS CO.,LTD.|PATE) Ju-04 4 Io, a0 3/39. OUTLINE DIMENSIONS 9.1 OUTLINE DIMENSIONS 167.0 +0.5 (200.0) 160.0 +0.5 7.0 40.5 152.0 +0.3 11.0 +0.3 (122.0) (20.0) 120.0 min. 21.0 max. 0.36x319+0.345=115.185 23.41 40.3 9 > F| oe a is 7.0 40.5 =} B| 8] oo 7.3 20.5 | 2-12 AY ] _ - - X - - _ - 4-3.5 40.3 BO KO o 408.5 203 | g ; Dots Area 3, 2 wolw 0.36 Effective Area ~ 1 oo] : " ;' Ss & L, 0.345 Window of Metal Frame y a I 7 I [Poo NE 7, Li CN2 uw | ] -: | Sle] [2/2 Blo} S/R] R 1 | | &| 2} o : re a | S 3 To) Viewing Direction a es} 8 o 2 = - - - - Fa oO 7.0 20.5 Ss We ----~-~- wa Ss in & Fi 0.85 +0.2 0.3 +0.1 2 - : we Oley] S/S 1.25201 J | 0.8 20.1 F191 Se 18.75 40.3 Po Detail A rm] 2] Pio Detail A < ) Fj iN Note 1 : Measurement when adding 9.8 x 10* Pa at the measuring point. Scale : NTS Unit :mm KAOHSIUNG HITACHI \ Sh. ELECTRONICS CO..LTD. DATE | Jun.04,'04 |g |7B63PS 2709-SP14Q006-T-5 |PAGE | 9-1/29.2 DISPLAY PATTERN 115.185 (320 dots) 0.36 0.345 .] 86.385 (240 dots) ml C1 0.345 | [ose 0.36 9.3 INTERFACE PIN CONNECTION FPC : pitch 1.25mm 14 pins Scale : NTS Unit : mm Measurement Tolerance: +0.1 INTERFACE PIN No. SIGNAL LEVEL FUNCTION LCM | CN1 1 DO H/L {Display Data 2 D1 3 D2 4 D3 5 DOFF H/L__|H:ON / L: OFF 6 FLM H First Line Marker 7 N.C - - 8 CL1 H->L |Data Laich 9 CL2 HL |Data Shift 10 VDD - Power Supply for Logic 11 vss - GND 12 VEE - Power Supply for LC 13 v0 - Operating Voltage LC Driving 14 VSS - GND INTERFACE PIN No. SIGNAL LEVEL FUNCTION LCM | CN2 1 VLED(+) - Power Supply for LED 2 N.C - 3 N.C - - 4 VLED(-) - LED GND LED IVF: JAE /ILG-4S8S $3C2 KAOHSIUNG HITACHI DATE] Jun.04,04 Sh. 7B64PS 2709- SP14Q006-T-5 |PAGE | 9-2/2 ELECTRONICS CO.,LTD. No.10. APPEARANCE STANDARD 10.1 APPEARANCE INSPECTION CONDITION Visual inspection should be done under the following condition. (1) The inspection should be done under in the dark room. (2) The CFL should be lighted with the prescribed inverter. (3) The distance between eyes of an inspector and the LCD module is 25cm. (4) The viewing zone is shown the figure . Viewing angle <25 eye LCD Bezel 10.2 DEFINITION OF EACH ZONE A zone: Within the effective area specified at page 9-1/2 of this document. B zone: Area between the window of metal frame and the effective area line specified at page 9-1/2 of this document. pre eee | Effective Area | K Window of Metal Frame | iY A zone meee einen KAOHSIUNG HITACHI Sh. 04, 2710- SP14Q006-T-5 |PAGE - ELECTRONICS CO.,LTD. DATE} Jun.04,704 No. 7B64PS 0 Q 10-1/310.3 APPEARANCE SPECIFICATION *) If a problem occurs in respect to any of these items, both parties(Customer and HITACHI) will discuss in more detail. No. ITEM CRITERIA A|B Scratches Distinguished one is not acceptable * | = (To be judged by HITACHI limit sample) Dent Same as Above - Wrinkles in Polarizer |Same as Above - Bubbles Average Diameter Maximum Number D(mm) Acceptable D=<=0.2 Ignore 0.2<D=<0.3 12 Ol - 0.3<Ds0.5 3 0.5<D None Stains, Filamentous Foreign Materials, Length Width Maximum Number | ] - Dark Spot L(mm) W(mm) Acceptable L=2.0 W 30.03 Ignore L<3.0 0.03<W =0.05 6 L L=2.5 0.05<W=0.1 1 Round Average Maximum Number Minimum Diameter Acceptable Space C D(mm) D<0.2 ignore - CO} - 0.2 =D<0.33 8 10mm 0.335D None - D Total Filamentous + Round = 10 Those wiped out easily are acceptable OO Color Tone To be judged by HITACHI limit sample QO] - Color Uniformity Same as above | - Pinhole Average Diameter Maximum Number D(mm) Acceptable D=0.15 Ignore 0.15<D=<0.3 10 Cs0.015 Ignore Contrast Average Contrast Maximum Minimum |Q] - Irregularity Diameter Number Space (Spot) D(mm) Acceptable D<0.25 To be Ignore - 0.25<Ds0.35 | judged by 10 20mm 0.35<Ds0.5 HITACHI 4 20mm 0.5 <D None - KAOHSIUNG HITACHI Sh. ELECTRONICS CO.LTD. DATE] Jun.04,'04 No. 7B64PS 2710- SP14Q006-T-5 |PAGE | 10-2/3No. ITEM A |B oe Width Length nen Minimum rregularity (Line) D(mm) Limm) | acceptable | SP2 L (Filamentous) W 0.25 L31.2 2 20mm C ws02 | LS15 3 20mm | O | D WsS0.15 L<=2.0 3 20mm Ws0.1 L33.0 4 20mm Total 6 Rubbing Scratch |To be judged by HITACHI standard QO} Note 1: Definition of average diameter (D) b PAGE atb _ A Di o > D,...... verage Diameter Note 2: Definition of length (L) and width (W) L L J = Note 3 : Definition of pinhole a & sf IY ~ c : Salience wo ol b s|1.8 bt KAOHSIUNG HITACHI ing |oh. ELECTRONICS CO., LTD. DATE| Jun.04,'04 No. 7B64PS 2710-SP14Q006-5 10-3/311. PRECAUTION IN DESIGN 11.1LC DRIVING VOLTAGE (VEE) AND VIEWING ANGLE RANGE Setting VEE out of the recommended condition will be a cause for a change of viewing angle range. 41.2 PRECAUTIONS AGAINST STATIC CHARGE As this module contains C-MOS LSls , it is not strong against electrostatic discharge. Make certain that the operators body is connected to the ground through a list band etc. And dont touch I/F pins directly. . 11.3 POWER ON SEQUENCE Input signals should not be applied to LCD module before power supply voltage is applied and reaches to specified voltage (VDD). if above sequence is not kept, C-MOS LSls of LCD modules may be damaged due to latch up problem. 11.4 PACKAGING (1) No leaving product is preferable in the place of high humidity for a long period of time. For their storage in the place where temperature is 35 C or higher ,special care to prevent them from high humidity is required. A combination of high temperature and high humidity may cause them polarization degradation as well as bubble generation and polarizer peel-off. Please keep the temperature and humidity within the specified range for use and storage. (2) Since polarizers tend to be easily damaged, They should be handled full with care so as not to get them touched, pushed or rubbed. (3) As the adhesives used for adhering polarizers are made of organic substances which will be deteriorated by a chemical reaction with such chemicals as acetone, toluene , ethancl and isopropyl alcohol. The following solvents are recommended for use: normal hexane Please contact us when it is necessary for you to use chemicals. (4) Lightly wipe to clean the dirty surface with absorbent cotton waste or other soft material like chamois , soaked in the chemicals recommended without scrubbing it hardly. To prevent the display surface from damage and keep the appearance in good state, it is sufficient, in general, to wipe it with absorbent cotton. (5) Immediately wipe off saliva or water drop attached on the display area because its long period adherence may cause deformation or faded color on the spot. (6) Foggy dew deposited on the surface due to coldness will be caused for polarizer damage, stain and dirt on product. When necessary to take out the products from some place at low temperature for test, etc. It is required for them to be warmed up in a container once at the temperature higher than that of room. (7) Touching the display area and contact terminals with bare hands and contaminating them are prohibited, because the stain on the display area and poor insulation between terminals are often caused by being touched by bare hands. (Some cosmetics are detrimental to polarizers.) KAOHSIUNG HITACHI Sh. 04, 7B64PS 2711- SP14 -T- - ELECTRONICS CO.,LTD. DATE} Jun.04,'04 No. Q006-T-5 |PAGE ; 11-1/2(8) In general the quality of glass is fragile so that it tends to be cracked or chipped in handling, specially on its periphery. Be careful not to give it sharp shock caused by dropping down, etc. 11.5 CAUTION FOR OPAERATION (1) it is an indispensable condition to drive LCDs within the specified voltage limit since the higher voltage than the limit causes the shorter LCD life. An electrochemical reaction due to direct current causes LCDs undesirable deterioration , so that the use of direct current driver should be avoided. (2) Response time will be extremely delayed at lower temperature than the operating temperature range and on the other hand at higher temperature LCDs show dark blue color in them. However those phenomena do not mean malfunction or out of order with LCDs which will come back in the specified operating temperature range. (3) If the display area is pushed hard during operation, some font will be abnormally displayed but it resumes normal condition after turning off once. (4) A slight dew depositing on terminals is a cause for electrochemical reaction resulting in terminal open circuit. Please operate the LCD module under the relative condition of 40C 85%RH. 11.6 STORAGE In case of storing for along period of time (for instance , for years) for the purpose of replacement use , the following ways area recommended. (1) Storage in a polyethylene bag with the opening sealed, so the fresh air will not be entered from outside . (2) Placing in a dark place where neither exposure to direct sunlight nor light is , keeping temperature in the range from 0C to 35. (3) Storing with no touch on polarizer surface by anything else. (It is recommended to store them as they have been contained inthe inner container at the time of delivery from us.) 11.7 SAFETY (1} It is recommendable to crash damaged or unnecessary LCDs into pieces and wash off liquid crystal by either of solvents such as acetone and ethanol, which should be burned up later. (2) When any liquid leaked out of a damaged glass cell comes in contact with your hands , please wash it off well with soap and water. KAOHSIUNG HITACHI Sh. 04, 7B64PS 2711- SP14Q006-T-5 _ ELECTRONICS CO.,LTD.|PATE| Hun-O4: 0% Io, Q PAGE | 11-2/212. DESIGNATION OF LOT MARK LOT MARK Lot mark is consisted of 4 digital number. 4llol|3 T YEAR FIGURE IN 4 LOT MARK 2004 4 Made in Taiwan 2005 5 Week 2006 6 Month 2007 7 Year 2008 8 Note 1: Some products have alphabet at the end or the first. FIGURE IN FIGURE IN WEEK _ |FIGURE IN MONTH | LOT MARK MONTH LOT MARK (DAY IN| [LOT MARK Jan. 01 Jul. 07 CALENDAR) Feb. 02 Aug. 08 01~07 1 Mar. 03 Sep. 0g 08~14 2 Apr. 04 Oct. 10 15~21 3 May 05 Nov. 11 22~28 4 Jun. 06 Dec. 12 29~31 5 Location of lot mark : on the back side of LCM 4034T KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE| Jun.04,04 Sh. No. 7BG64PS 2712- SP14Q006-T-5 PAGE 12-1/113. PRECAUTION FOR USE 13.1 A limit sample should be provided by the both parties on an occasion when the both parties agreed its necessity. Judgment by a limit sample shall take effect after the limit sample has been established and confirmed by the both parties. 13.2 On the following occasions, the handling of the problem should be decided through discussion and agreement between responsible persons of the both parties. (1) When a question is arisen in the specifications. (2) When a new problem is arisen which is not specified in this specifications. (3) When an inspection specifications change or operating condition change in customer is reported to HITACHI, and some probiem is arisen in this specification due to the change. (4) When a new problem is arisen at the customer's operating set for sample evaluation in the customer site. The precaution that should be observed when handling LCM have been explained above. If any points are unclear or if you have any request, please contact HITACHI. Sh. KAOHSIUNG HITACHI lpate| Jun.04,04 |~" |7B64Ps 2713- sP14qo0s-T-5 [PAGE| 13-1/1 ELECTRONICS CO.,LTD. No.