SaRonix Crystal Clock Oscillator ECL, PECL, High Frequency, SMD Technical Data SEL3600 / 3700 Series Frequency Range: 25 MHz to 155.52 MHz Frequency Stability: 50 or 100 ppm over all conditions: calibration tolerance, operating temperature, input voltage, load, aging, shock and vibration. Temperature Range: Operating: Storage: 0 to +70C -55 to +125C Supply Voltage: +5.0V or -5.2V or +3.3V PECL Supply Current: 70mA typ, 100mA max @ 5V, 63mA typ @ 3.3V Output Drive: Symmetry: Rise & Fall Times: Logic 0: ACTUAL SIZE Description Logic 1: A crystal controlled, high frequency, highly stable oscillator, compatible with 10K ECL Logic. The output can be disabled and wired-OR to facilitate testing or combining multiple clocks. Open emitter output allows the user to adjust termination to optimize matching and performance. Complementary outputs are standard.* Applications & Features * Ideal for high resolution graphics & imaging applications * Provides 10K compatible outputs * 3.3V PECL version available * Frequencies from 25 MHz to 155.52 MHz, consult factory for frequencies beyond this range * Disable/wired-OR output feature available * Standard SMD 6-pin J-lead package * Available on tape & reel; 24mm tape, 500pcs per reel Load: RMS Period Jitter: 45/55% max VBB or Complementary Outputs Crossing 350ps typ, 550ps max, 20% to 80% of the waveform VCC -1.60V max @ 5V VCC -1.62V max @ 3.3V VCC -1.02V min @ 5V VCC -1.025V min @ 3.3V 50 to VCC -2V (all outputs require termination) 3.5ps max, 1ps max 1 cycle-to-cycle jitter Mechanical: Shock: Solderability: Terminal Strength: Vibration: Solvent Resistance: Resistance to Soldering Heat: Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-202, MIL-STD-202, Method 2002, Condition B Method 2003 Method 2004, Condition B2 Method 2007, Condition A Method 215 Method 210, Condition I or J MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Part Numbering Guide SEL 3 6 0 1 B - 100.0000 (T) (T) = Tape & Reel full reel increments only Series ECL Supply Type 6 = Positive Supply, Pin 6 = VCC, Pin 3 = VEE 7 = Negative Supply, Pin 6 = VEE, Pin 3 = VCC Logic Type 0 = 10K, 5V 3 = 10K, 3.3V Frequency (MHz) Stability Tolerance B = 50 ppm C = 100 ppm Device Type (See Table I) 1 = Pin 2: NC 2 = Pin 2: Enable/Disable *For internal termination or single output without disable contact factory. DS-165 SaRonix REV D01 141 Jefferson Drive * Menlo Park, CA 94025 * USA * 650-470-7700 * 800-227-8974 * Fax 650-462-9894 SaRonix Crystal Clock Oscillator ECL, PECL, High Frequency, SMD Technical Data SEL3600 / 3700 Series Output Waveform Enable Function Truth Table where applicable (Table I) Complementary Logic 1 80% TRUTH TABLE Positive Supply VOH Min Outputs Crossing 20% Logic 0 Pin 2 Pin 4 Pin 1 Pin 4 Pin 1 Logic 0 or N/C CLK Output CLK Output CLK Output CLK Output Logic 1 Logic 0 Logic 1 Logic 1 Logic 0 VOL Max SYMMETRY 45% Min, 55% Max Enable/Disable Propagation Delay: 10K: ( [ 1/f ] / 2 ) +250ps 6 Supply Options (Table II) 5 4 8.74 .344 1 2 10.4 max .409 Solder Reflow Guide Device Type Pin 3 Pin 6 SEL36XX VEE 0V / GND VCC +5V / +3.3V SEL37XX VCC 0V / GND VEE -5V / -3.3V Temperature - C Package Details DENOTES PIN 1 Negative Supply 200 Preheat 183 10C Cooling 150 4C/sec max Time 5.9 .234 6.1 max .240 1 - 2 minutes 5 sec min 10 sec max Test Circuits POSITIVE SUPPLY (PECL) 0.46 .018 2.54 .100 (For SEL3701/3711 use -3.2V) 5.08 .200 +2V 6 5: N/C .75 .030 1.50.15 .059.006 4C/sec max 3 13.2 max .520 0.51 x45 CHAM .020 Reflow 235 5C 250 OSCILLATOR 1 50 INTERNAL SCOPE TERMINATION TO GND 8.74 .344 50 INTERNAL SCOPE TERMINATION TO GND 2 3 ENABLE/DISABLE OR N/C "ECL COMPATIBLE INPUT" Pin Functions: Pin 1: Output Pin 2: Enable / Disable or N/C Pin 3: V EE or V CC 4 Pin 4: Output Pin 5: N/C Pin 6: V CC or V EE -3V or -1.3V FOR SEL360X: USE -3V FOR SEL363X: USE -1.3V NEGATIVE SUPPLY (ECL) Recommended Land Pattern FOR SEL370X: USE -3V FOR SEL373X: USE -1.3V 5.08 .200 -3V or -1.3V 6 5: N/C 4 OSCILLATOR 8.62 .339 1.27 .050 50 INTERNAL SCOPE TERMINATION TO GND 2.5 .100 1 2 50 INTERNAL SCOPE TERMINATION TO GND 3 ENABLE/DISABLE OR N/C "ECL COMPATIBLE INPUT" 2.54 .100 Scale: None ( Dimensions in mm ) inches +2V All specifications are subject to change without notice. DS-165 SaRonix REV D01 141 Jefferson Drive * Menlo Park, CA 94025 * USA * 650-470-7700 * 800-227-8974 * Fax 650-462-9894