PAGE . 1
November 3,2010-REV.01
DI200S~DI2010S
• Plastic material used carries Underwriters
Laboratory recognition 94V-O
• Low leakage
• Surge overload rating-- 50 amperes peak
• Ideal for printed circuit board
• Exceeds environmental standards of MIL-S-19500/228
• Lead free in comply with EU RoHS 2011/65/EU directives
MECHANICAL DATA
• Case: Reliable low cost construction utilizing molded plastic technique
results in inexpensive product
• Terminals: Lead solderable per MIL-STD-750, Method 2026
• Polarity: Polarity symbols molded or marking on body
• Mounting Position: Any
• Weight: 0.0115 ounce, 0.3268 gram
DUAL-IN-LINE GLASS P ASSIV A TED SINGLE-PHASE SURF ACE MOUNT BRIDGE RECTIFIER
MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz, Resistive or inductive load.
For capacitive load, derate current by 20%
NOTES:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
2. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.5 X 0.5"(13 X 13mm) copper pads
FEATURES
VOLTAGE 50~1000 V olts 2.0 AmperesCURRENT
PARAMETER SYMBOL DI200S DI201S DI202S DI204S DI206S DI208S DI2010S UNITS
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Current TA=40OCI
F(AV) 2.0 A
Peak Forward Surge Current:8.3ms single half sine-wave
superimposed on rated load (JEDEC method) IFSM 50 A
I2t Rating for fusing ( t<8.35ms) I2t10.0A
2S
Maximum Forward Voltage Drop per Bridge Element at 2.0A VF1.1 V
Maximum DC Reverse CurrentTJ=25 OC
at Rated DC Blocking VoltageTJ=125 OCIR
5.0
500 μA
Typical Junction capacitance (Note 1) CJ25 pF
Typical thermal resistance per leg ((Note 2) RθJA
RθJL
40
15
OC / W
Operating Junstion and Storage Temperature Range TJ,TsTG -55 to + 150 OC
0.335(8.51)
0.316(8.05)
0.406(10.3)
0.360(9.40)
0.255(6.5)
0.245(6.2)
0.045(1.14)
0.035(0.89)
0.098(2.5)
0.086(2.2)
0.310(7.9)
0.290(7.4)
0.011(0.28)
0.004(0.10)
0.009(0.25)
0.060(1.524)
0.040(1.016)
• Green molding compound as per IEC61249 Std. . (Halogen Free)
PAGE . 2
November 3,2010-REV.01
DI200S~DI2010S
FIG.1 DERATING CURVE FOR OUTPUT
RECTIFIED CURRENT
FIG.3 TYPICAL REVERSE CHARACTERISTICS
AMBIENT TEMPERATURE, C
O
PERCENT OF PEAK REVERSE VOLTAGE, %
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
INSTANTANEOUS REVERSE CURRENT,uA
RATING AND CHARACTERISTIC CURVES
3.0
2.0
1.0
0
0 50 100 150
1.5
2.5
0.5
T = 100 C
A
O
T=25 C
A
O
10
1.0
0.1
0.01
0 20 40 60 80 100 120 140
Fig.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
Fig.4 MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT
NO. OF CYCLES AT 60Hz
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
FORWARD SURGE CURRENT,AMPERES pk
(HALF SINE-WAVE)
0
.01
.1
1.0
10
0.2 0.4 0.6 0.8 1.0 1.2 1.4
10060
60
50
70
40
40
30
20
2010
10
5
21
0
PAGE . 3
MOUNTING P AD LA YOUT
• Packing information
T/R - 1.5K per 13" plastic Reel
ORDER INFORMA TION
DI200S~DI2010S
November 3,2010-REV.01
PAGE . 4
Part No_pa cking code _Version
DI200S_R2_00001
DI200S_T0_00001
For example :
RB500V-40_R2_00001
Part No. Serial number
Version code means HF
Packing size code means 13"
Packing type means T/R
Packing Code XX Version C o de XXXXX
Packing type 1
st
Code Packing size code 2
nd
Code HF or RoHS 1
st
Code 2
nd
~5
th
Code
Tape and Ammunition Box
(T/B) AN/A 0HF 0 serial number
Tape and R ee l
(T/R) R7" 1RoHS 1 serial number
Bu lk Pac k in g
(B/P) B13" 2
Tube Packing
(T/P) T26mm X
Tape and Reel (Right Oriented)
(TRR) S52mm Y
Tape and Reel (Left Oriented)
(TRL) LPANASERT T/B CATHODE UP
(PBCU) U
FORMING FPANASERT T/B CATHODE DOWN
(PBCD) D
DI200S~DI2010S
November 3,2010-REV.01
PAGE . 5
Disclaimer
•Reproducing and modifying information of the document is prohibited without permission
from Panjit International Inc..
•Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest
document.
Panjit International Inc. disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
•Panjit International Inc. does not assume any and all implied warranties, including warranties
of fitness for particular purpose, non-infringement and merchantability.
•Applications shown on the herein document are examples of standard use and operation.
Customers are responsible in comprehending the suitable use in particular applications.
Panjit International Inc. makes no representation or warranty that such applications will be
suitable for the specified use without further testing or modification.
•The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages
resulting from such improper use or sale.
•
•Since Panjit uses lot number as the tracking base, please provide the lot number for tracking
when complaining.
DI200S~DI2010S
November 3,2010-REV.01
