MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06 Vishay Beyschlag Leaded Metal Film Resistors with Established Reliability FEATURES MBA/SMA 0204 VG06, MBB/SMA 0207 VG06 and MBE/SMA 0414 VG06 leaded metal film resistors with established reliability are the perfect choice for all high-reliability applications typically found in the fields of military, aircraft and spacecraft electronics. These versions supplement the families of professional and precision leaded resistors MBA/SMA 0204, MBB/SMA 0207 and MBE/SMA 0414. IECQ-CECC approved to EN 140101-806, version E Established reliability, failure rate level E7 Advanced thin film technology Excellent overall stability: Up to class 0.25 Fused pure tin (Sn) plating on copper (Cu) wire Compliant to RoHS Directive 2002/95/EC APPLICATIONS Military Avionics Space METRIC SIZE DIN 0204 0207 0414 A B D EN/CECC TECHNICAL SPECIFICATIONS DESCRIPTION EN/CECC Size, Style Resistance Range MBA/SMA 0204 VG06 MBB/SMA 0207 VG06 A B D 1 to 5.11 M; 0 1 to 10 M; 0 1 to 21.5 M Resistance Tolerance MBE/SMA 0414 VG06 1 %; 0.1 % Temperature Coefficient 50 ppm/K; 15 ppm/K 200 V 350 V (1) 500 V 1 Minute; Uins 300 V 500 V 800 V (1) Continuous 75 V 75 V 75 V Operating Voltage, Umax. AC/DC Permissible Voltage Against Ambient (Insulation): E7 = 10-7/h Assessed Failure Rate Level Quality Factor, Q 0.1 < 0.1 x 10- 9/h Failure Rate, FITobserved Notes * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. * The failure rate level E7 (10-7/h, Q = 0.1), corresponding to MIL Level R, is superior to level E6 (10-6/h, Q = 0.3) or level E5 (10-5/h, Q = 1) and thus may be used as a replacement. (1) These figures provide a user advantage over the prescriptions or requirements of EN140101-806. TECHNICAL SPECIFICATIONS FOR PRODUCTS 50 ppm/K; 1 % DESCRIPTION Rated Dissipation P70 MBA/SMA 0204 VG06 MBB/SMA 0207 VG06 MBE/SMA 0414 VG06 0.4 W 0.6 W 1 W (1) Permissible Film Temperature F max. 155 C - 55 C to 155 C Operating Temperature Range Max. Resistance Change at P70 for Resistance Range, |R/R| max., after: www.vishay.com 60 1 to 332 k 1 to 1 M 1 to 2.43 M 1000 h 0.5 % 0.5 % 0.4 % (1) 8000 h 1% 1% 0.8 % (1) For technical questions, contact: specialresistors@vishay.com Document Number: 28768 Revision: 01-Feb-11 MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06 Leaded Metal Film Resistors with Established Reliability Vishay Beyschlag TECHNICAL SPECIFICATIONS FOR PRODUCTS 15 ppm/K; 0.1 % DESCRIPTION MBA/SMA 0204 VG06 0.25 W Rated Dissipation P70 MBB/SMA 0207 VG06 MBE/SMA 0414 VG06 0.4 W 0.65 W (1) (1) Permissible Film Temperature F max. 125 C - 55 C to 125 C Operating Temperature Range Max. Resistance Change at P70 for Resistance Range, |R/R| max., after: 100 to 221 k 100 to 499 k 100 to 470 k 1000 h 0.25 % 0.15 % (1) 0.25 % 8000 h 0.5 % 0.5 % 0.5 % Note (1) These figures provide a user advantage over the prescriptions or requirements of EN140101-806. PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: MBB0207CE3523BCT00 PART NUMBER: MBB0207CZ0000ZCT00 M B B 0 2 0 7 C E 3 5 2 3 B C T 0 0 M B B 0 2 0 7 C Z 0 0 0 0 Z C T 0 0 MODEL and SIZE VARIANT TCR/MATERIAL RESISTANCE TOLERANCE PACKAGING MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 C = EN 140101-806, version E, failure rate level E7 C = 50 ppm/K E = 15 ppm/K Z = Jumper 3 digit value 1 digit multiplier MULTIPLIER 8 = *10- 2 9 = *10- 1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 0000 = Jumper F=1% B = 0.1 % Z = Jumper C1 CT PRODUCT DESCRIPTION: MBB/SMA 0207-15 0.1 % VG06 CT 352K PRODUCT DESCRIPTION: MBB/SMA 0207 VG06 CT 0R0 MBB/SMA 0207 -15 0.1 % VG06 CT 352K MBB/SMA 0207 - - VG06 CT 0R0 MODEL and SIZE TCR TOLERANCE VARIANT PACKAGING RESISTANCE MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 50 ppm/K 15 ppm/K 1% 0.1 % VG06 = EN 140101-806, version E, failure rate level E7 C1 CT 49R9 = 49.9 352K = 352 k 0R0 = Jumper Note * Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION. Document Number: 28768 Revision: 01-Feb-11 For technical questions, contact: specialresistors@vishay.com www.vishay.com 61 MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06 Leaded Metal Film Resistors with Established Reliability Vishay Beyschlag EN 140101-806 ORDERING INFORMATION Example of the ordering information for a resistor:MBB/SMA 0207-15 0.1 % VG06 352K EN140101-806EZBP352KBE7 Example of the ordering information for a zero ohm jumper:MBB/SMA 0207 VG06 0R0 EN140101-806EZB-0R00-E7 The elements used in the component number have the following meaning: EN detail specification number Assessment level for the zero-defect approach Style Temperature coefficient, according to EN60062 R = 50 ppm/K; P = 15 ppm/K Resistance value, according to EN60062, 4 characters Tolerance on rated resistance, according to EN60062 F = 1 %; B = 0.1 % Failure rate level according to EN60115-1, Table ZB.1 EN140101-806 EZ B P 352K B E7 Note * The ordering information according to EN 140101-806:2007 shown above succeeds and replaces the ordering information according to its predecessor CECC 40101-806, for example: CECC 40101-806 S B E 352K B E7 with S Assessment level, where EZ is successor to and superior replacement for S E Temperature coefficient, according to the detail specification C = 50 ppm/K; E = 15 ppm/K TEMPERATURE COEFFICIENT AND RESISTANCE RANGE DESCRIPTION TCR RESISTANCE RANGE TOLERANCE MBA/SMA 0204 VG06 MBB/SMA 0207 VG06 MBE/SMA 0414 VG06 50 ppm/K 1% 1 to 5.11 M 1 to 10 M 1 to 21.5 M 15 ppm/K 0.1 % 100 to 221 k 100 to 499 k 100 to 470 k 10 m; Imax. = 3 A 10 m; Imax. = 5 A - Jumper Note * According to EN140101-806, resistance values are to be selected from the E96 series for 1 % tolerance and from the E192 series for 0,1 % tolerance. PACKAGING MODEL CODE QUANTITY C1 1000 PACKAGING STYLE PITCH PACKAGING DIMENSIONS 184 mm x 75 mm x 42 mm 53 mm MBA/SMA 0204 VG06 CT 5000 C1 1000 MBB/SMA 0207 VG06 MBE/SMA 0414 VG06 WIDTH CT 5000 C1 1000 Taped acc. IEC 60286-1, fan-folded in a box 330 mm x 75 mm x 55 mm 5 mm 184 mm x 75 mm x 42 mm 53 mm 324 mm x 77 mm x 83 mm 63 mm 377 mm x 85 mm x 47 mm Notes * Width is the nominal spacing between tapes, with the nominal tape width on both sides being 6 mm, and pitch is the nominal standard spacing between components; tolerances apply according to IEC 60286-1. * The length given for reel packages includes the protrusion of the hub joint. * The tape on one side is marked with a black print every 100th component position. www.vishay.com 62 For technical questions, contact: specialresistors@vishay.com Document Number: 28768 Revision: 01-Feb-11 MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06 Leaded Metal Film Resistors with Established Reliability Vishay Beyschlag DIMENSIONS D d L I M DIMENSIONS AND MASS Dmax. (mm) Lmax. (mm) Imin. (mm) dnom. (mm) MBA/SMA 0204 VG06 1.6 3.6 29 MBB/SMA 0207 VG06 2.5 6.3 28 MBE/SMA 0414 VG06 4.0 11.9 31 TYPE Mmin. (mm) MASS (mg) 0.5 5 125 0.6 10 220 0.8 15 700 Note * Color code marking is applied according to IEC 60062 (3) in five bands. Each color band appears as a single solid line, voids are permissible if at least 2/3 of the band is visible from each radial angle of view. The last color band for tolerance is approximately 50 % wider than the other bands. Zero ohm jumpers are marked with one centered black color band. An interrupted violet band between the 1st and 2nd full band indicates the failure rate level E7. An interrupted orange band between the 4th and 5th full band indicates the temperature coefficient of 15 ppm/K. DESCRIPTION ASSEMBLY Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body (Al2O3) and conditioned to achieve the desired temperature coefficient. Plated steel termination caps are firmly pressed on the metallised rods. A special laser is used to achieve the target value by smoothly cutting a helical groove in the resistive layer without damaging the ceramics. Connecting wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps. The resistor elements are covered by a light blue protective coating designed for electrical, mechanical and climatic protection. Five colour code rings designate the resistance value and tolerance in accordance with IEC 60062 (3). The resistors are suitable for processing on lead forming and cropping equipment and automatic insertion machines. They are suitable for automatic wave or reflow soldering, including miniature wave selective soldering. Solderability is specified for 2 years after production or requalification, however, the permitted storage time is 20 years. The result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1 (3). The resistors are completely lead (Pb)-free, the fused pure tin plating provides compatibility with lead (Pb)-free soldering processes. The immunity of the plating against tin whisker growth has been proven under extensive testing. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. All products comply with the GADSL (1) and the CEFIC-EECA-EICTA (2) list of legal restrictions on hazardous substances. This includes full compliance with the following directives: 2000/53/EC End of Vehicle Life Directive (ELV) and Annex II (ELVII) 2002/95/EC Restriction of the Substances Directive (RoHS) use of Hazardous 2002/96/EC Waste Electrical and Electrical Equipment Directive (WEEE) Document Number: 28768 Revision: 01-Feb-11 For technical questions, contact: specialresistors@vishay.com www.vishay.com 63 MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06 Vishay Beyschlag Leaded Metal Film Resistors with Established Reliability APPROVALS RELATED PRODUCTS The resistors are approved within the IECQ-CECC Quality Assessment System for Electronic Components to the detail specification EN140101-806 which refers to EN60115-1, EN140100 and the variety of environmental test procedures of the IEC 60068 (3) series. A wider range of TCR, tolerance and resistance values, plus the option of values from a different E series is available with products approved to EN140101-806, version A, without established reliability, nominal failure rate level E0 (Quality factor Q = 3). See the datasheets: Conformity is attested by the use of the CECC logo ( the Mark of Conformity on the package label. "Professional Leaded Metal Film Resistors", document no. 28766 ) as Vishay BEYSCHLAG has achieved "Approval of Manufacturer" in accordance with IEC QC 001002-3, clause 2. The release certificate for "Technology Approval Schedule" in accordance with CECC 240001 based on IEC QC 001002-3, clause 6 is granted for the Vishay Beyschlag manufacturing process. "Precision Leaded Metal Film Resistors", document no. 28767 Notes (1) Global Automotive Declarable Substance List, see www.gadsl.org. (2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade organisation representing the information and communications technology and consumer electronics), see www.eicta.org/index.php?id=1053&id_article=340. (3) The quoted IEC standards are also released as EN standards with the same number and identical contents. Power Dissipation P FUNCTIONAL PERFORMANCE 1.0 W 0.5 MBE/SMA 0414-50 1 % VG06 MBB/SMA 0207-50 1 % VG06 MBA/SMA 0204-50 1 % VG06 0.0 - 50 0 50 70 100 C 150 Ambient Temperature amb Derating for Products 50 ppm/K; 1 % www.vishay.com 64 For technical questions, contact: specialresistors@vishay.com Document Number: 28768 Revision: 01-Feb-11 MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06 Power Dissipation P Leaded Metal Film Resistors with Established Reliability Vishay Beyschlag MBE/SMA 0414-15 0.1 % VG06 MBB/SMA 0207-15 0.1 % VG06 MBA/SMA 0204-15 0.1 % VG06 1.0 W 0.5 0.0 - 50 0 50 70 100 C 150 Ambient Temperature amb Current Noise A1 Derating for Products 15 ppm/K; 0.1 % MBE/SMA 0414 VG06 MBB/SMA 0207 VG06 MBA/SMA 0204 VG06 1 V/V 0.1 0.01 100 1K 10K 100K 1M In accordance with IEC 60195 10M Resistance Value R Current Noise - A 1 (1) Non-Linearity A 3 Note (1) These figures provide a user advantage over the prescriptions or requirements of EN140101-806. 120 dB 100 80 MBE/SMA 0414 VG06 MBB/SMA 0207 VG06 MBA/SMA 0204 VG06 60 10 100 1K In accordance with IEC/TR 60440 10K 100K 10M Resistance Value R 1M Non-Linearity - A 3 Document Number: 28768 Revision: 01-Feb-11 For technical questions, contact: specialresistors@vishay.com www.vishay.com 65 MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06 Vishay Beyschlag Leaded Metal Film Resistors with Established Reliability FUNCTIONAL PERFORMANCE TEST AND REQUIREMENTS Further information on the performance of these products is given in the following datasheet: All tests are carried out in accordance with the following specifications: "Professional Leaded Metal Film Resistors", document no. 28766 EN60115-1, generic specification EN140100, sectional specification "Precision Leaded Metal Film Resistors", document no. 28767 EN140101-806, detail specification For further information on the tests and requirements of these products please refer to the specifications mentioned above, and to the following datasheet: "Professional Leaded Metal Film Resistors", document no. 28766 "Precision Leaded Metal Film Resistors", document no. 28767 HISTORICAL 12NC INFORMATION The resistors had a 12-digit numeric code starting with 2312 The subsequent 4 digits indicated the resistor type, specification and packaging; see the 12NC table The remaining 4 digits indicated the resistance value: - The first 3 digits indicate the resistance value - The last digit indicated the resistance decade in accordance with the resistance decade table RESISTANCE DECADE RESISTANCE DECADE LAST DIGIT 1 to 9.99 8 10 to 99.9 9 100 to 999 1 1 k to 9.99 k 2 10 k to 99.9 k 3 100 k to 999 k 4 1 M to 9.99 M 5 10 M to 99.9 M 6 Historical 12NC Example The 12NC of a MBB 0207 VG06 resistor, value 352K. and TCR 15 with 0.1 % tolerance, supplied taped and fan-folded in a box of 5000 units was: 2312 917 03524. HISTORICAL 12NC - Resistor type and packaging 2312 ... ..... DESCRIPTION TYPE MBA 0204 VG06 TAPED, FAN-FOLDED IN A BOX TOL. C1 1000 PIECES CT 5000 PIECES 50 ppm/K 1% 900 0.... 905 0.... 15 ppm/K 0.1 % 902 0.... 907 0.... 902 90001 907 90001 915 0.... TCR Jumper MBB 0207 VG06 50 ppm/K 1% 910 0.... 15 ppm/K 0.1 % 912 0.... 917 0.... 912 90001 917 90001 Jumper MBE 0414 VG06 50 ppm/K 1% 920 0.... 15 ppm/K 0.1 % 922 0.... - Note * The 12NC coding had been established for the series of MBA 0204 VG06, MBB 0207 VG06 and MBE 0414 VG06 products. These products are succeeded and replaced by the new series of MBA/SMA 0204 VG06, MBB/SMA 0207 VG06 and MBE/SMA 0414 VG06 products, for which the 12NC coding is no longer applicable. The 12NC numeric codes are no longer supported as an official Vishay ordering code. However, customers using the 12NC in their material management system may choose to use the 12NC as their customer specific part numbering system. www.vishay.com 66 For technical questions, contact: specialresistors@vishay.com Document Number: 28768 Revision: 01-Feb-11 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1