MSMP150 -- ICCNexergy Page 1 of 3 MSMP150 Series 150 W Medical Open Frame Power Supply * Wide Range AC Input * Power Factor Correction * +5V Standby & Fan Power * Fully regulated DC output * Output Floating * High Efficiency * Medical Approval - EN60601-1 Class I * EISA Compliant * RoHs Compliant Elpac Part Number Output Voltage Output Current Typical Efficiency MSMP15012F 12.0V 12.5A 82% MSMP15015F 15.0V 10.0A 83% MSMP15024F 24.0V 6.2A 85% MSMP15028F 28.0V 5.3A 86% MSMP15048F 48.0V 3.2A 85% Input Input Voltage 85 - 264VAC 100 - 240VAC Nominal Input Frequency 47 - 63Hz Input Current 5A @ 100VAC Touch Leakage Current <75A @ 132VAC @ 60Hz <75A @ 264VAC @ 60Hz Output Output Voltage See Table Total Regulation +/-5% http://iccnexergy.com/elpac/medical-power-supplies/open-frame/msmp150/ 5/27/2011 MSMP150 -- ICCNexergy Page 2 of 3 Minimum Load No minimum load required Start-Up Delay <1s Hold-Up Time >20ms at full load, 115VAC Ripple & Noise <1% pk-pk ** Over Voltage Protection 110-135% Over Temperature Protection Active - Recoverable; plus Passive - Non Recoverable Over Current Protetion 120 - 180% Short Circuit Protection Pulsing Mode Auto Recovery General Efficiency Avg Efficiency % @ 115VAC; % @ 230VAC MTBF min. 200,000 hours demonstrated Size 5.25 Weight 2.0 lbs (0.91 kg) Environmental Operating Temperature 0 - 50C (Full load to 50C, derate linearly to 50% load at 70C) Storage Temperature -40C to +85C Relative Humidity 5-95%, non-condensing Cooling Natural Convection (250W) or Forced Air (350W) Vibration All units production tested to 19.6m/s2 EMC & Safety Emissions FCC class B, CISPR11 class B EN61000-3-2, Class D Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11 Certified by TUV to the following: cTUVus UL 60601-1 CAN/CSA-22.2 No.601.1-M90 CB per IEC60601-1 CE marked to LVD http://iccnexergy.com/elpac/medical-power-supplies/open-frame/msmp150/ 5/27/2011 MSMP150 -- ICCNexergy Page 3 of 3 MSMP150 | ICCNEXERGY | (c) 2011 | http://iccnexergy.com/elpac/medical-power-supplies/open-frame/msmp150/ 5/27/2011