Plug-In Phase Detector 50 High Output Maximum Ratings RPD-1+ 1 to 100 MHz Features Operating Temperature -55C to 100C Storage Temperature -55C to 100C Input Power 50mW Peak IF current 20mA Permanent damage may occur if any of these limits are exceeded. Pin Connections RF REF (RF2) 8 RF IN (RF1) 1 DC OUT (I) * * * * wideband, 1 to 100 MHz hermetic case low DC offset, 0.2 mV typ. high DC output, 1000 mV typ. 2,5,6,7 CASE GROUND 2 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications * monitoring circuits * leveling circuits * PLL Phase Detector Electrical Specifications 3,4 GROUND CASE STYLE: A01 PRICE: $20.70 ea. QTY (1-9) FREQUENCY (MHz) POWER IN SCALE FACTOR RF1 RF1 I RF2 RF2 1-100 Outline Drawing (dBm) mV/deg. 7 8 DC-50 IMPEDANCE (ohms) Output Load I 500 ISOLATION (dB) OUTPUT POLARITY DC OUTPUT (mV) RF1/RF2 RF1/RF2 Min. In-Phase Typ. Min. Typ. Max. Typ. 40 neg. 1000 700 0.2 1 143 Max. FIGURE OF MERIT Offset DC output decreases to 550mV over 1-10 MHz as temperature decreases to -55C Typical Performance Data Frequency (MHz) DC Output mV -- X 1.00 5.00 8.07 10.00 15.14 20.00 22.21 29.29 36.36 40.00 43.43 50.50 57.57 60.00 64.64 71.71 78.79 85.86 92.93 100.00 Outline Dimensions ( inch mm ) E F .370 .400 9.40 10.16 wt grams 5.2 -- X -- X 14.85 8.90 14.44 14.61 17.01 18.91 20.52 22.55 24.77 25.39 26.41 25.99 28.69 33.08 38.60 45.18 51.83 57.31 60.65 74.27 0.10 0.11 0.11 0.10 0.11 0.11 0.10 0.11 0.11 0.12 0.12 0.14 0.15 0.15 0.15 0.17 0.18 0.17 0.18 0.23 0.16 0.18 0.18 0.18 0.19 0.19 0.20 0.21 0.22 0.23 0.23 0.25 0.27 0.26 0.27 0.31 0.31 0.31 0.38 0.43 76.12 75.09 74.07 73.19 70.19 68.10 67.28 65.14 63.29 62.38 61.76 60.51 59.35 59.18 58.73 57.82 57.35 57.15 56.93 56.36 RPD-1+ DC OFFSET RPD-1+ DC OUTPUT -500 at RF/LO power = 7 dBm 0.25 -600 -700 -800 -900 0 RF1-RF2 ISOLATION (dB) at RF/LO power = 7 dBm 0.20 0.15 0.10 0.05 0.00 -1000 90 RF1-RF2 Isolation (dB) DC OFFSET (mV) C D .385 .400 9.78 10.16 J K .14 .031 3.56 0.79 DC OUTPUT (mV) A B .770 .800 19.56 20.32 G H .200 .20 5.08 5.08 -769.98 -830.34 -840.24 -843.71 -851.12 -859.20 -861.26 -872.02 -881.57 -886.86 -889.93 -917.82 -927.50 -917.14 -920.62 -925.22 -928.03 -932.34 -932.98 -909.17 DC Offset mV 20 40 60 FREQUENCY (MHz) RPD-1+ RF1-RF2 ISOLATION 80 100 0 20 40 60 80 100 FREQUENCY (MHz) electrical schematic at RF/LO power = 7 dBm 80 70 60 50 40 0 20 40 60 80 100 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits (R) www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. B M108294 RPD-1+ DJ/TD/CP 070205