AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
The Rugged, Modular Solution for
Flexible, Reliable Aerospace Connectivity
DEUTSCH
DMC-M Series
Multicavity EN4165 Connectors
DEUTSCH
DMC-M
Multicavity Connectors
Flexible Modularity
Rugged for Harsh Environments
EN4165 Compliant
Table of Contents
Introduction 4
Typical Configuration 6
Specifications 7
Receptacles
Dimensional Drawings 8
Part Numbering System 10
Multi-Receptacle Plates 12
Receptacle Keying 13
Plugs
Dimensional Drawings 14
Part Numbering System 16
Plug Keying 18
Modules
Overview and Dimensions 19
Part Numbering System 22
Accessories
Shielded Accessory Bodies 27
Nonshielded Cable Clamps 29
Chimneys for Shielded Accessories 30
Masses 32
Contacts and Tooling
Electrical Contacts and Tooling 36
Fiber Optic Termini 38
Fiber Optic Tool Kits and Training 39
Panel Cutouts 40
Connector Tooling 41
User Manual 42
PAGE 4
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
MODULARITY
Crimp and PCB contacts size 24
to size 08
Signal, coaxial, microcoax,
Quadrax, power, optical,
thermocouple contacts
• High-speed Ethernet modules
• Aluminum cable compliant
FLEXIBLE
Easily replaced modules for fast
reconfiguration
Allows mixing of male and female
modules in each connector half
Wide range of modules allows
great flexibility in input/output
configurations
WEIGHT OPTIMIZATION
Nickel or cadmium-plated
composite shells
• Compact solution
EASY TO INSTALL
• 36 keying possibilities
• Quick-install coupling
RELIABLE
• Environmental sealing
• Vibration resistant
EMI protection as per
EN4165 standard
Meets FAA ammability, smoke, and
toxicity requirements
• EN4165 and BACC65 compliant
Modular, Compact, and Weight Saving
Originally designed in the 1980s, DEUTSCH DMC-M
connectors from TE Connectivity (TE) have evolved into
one of the most widely used connector styles for cabin
applications in commercial aerospace. Standardized in
European Standard EN4165, DMC-M connectors provide
a modular, exible, and reliable system. The connectors
are available in both multi-cavity and single-module
congurations, using the same modules, to provide compact,
lightweight connectivity.
Gain Flexibility
Today this connector continues to attract new users and
applications because of its modularity, space/weight
savings and robustness. In addition, it has evolved to include
composite housings, aluminum wire capability, ber optics,
higher densities, and shunting congurations.
Save Weight
The DMC-M shells are available in lightweight aluminum alloy
or composite, with nickel or cadmium plating, to withstand
harsh environments. For EMI protection, the connectors use
360° shielding on the shell interfaces.
DEUTSCH DMC-M Series
Multicavity EN4165
PAGE 5
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Space Savings
1
22
1
22
1
22
1
22
1
22
1
22
1
22
1
22
1
22
30-22 insert Purple interior
Circular Connectors
Insert 13-35
Size 22 Contacts, 5A
198 contacts
309 g (without panel)
36 mounting screws
9 panel cutouts
DMC-M Connectors
Insert 20-22
Size 22 Contacts, 5A
320 contacts
149 g (without panel)
10 mounting screws
1 panel cutout
DMC-M Connectors
Insert 30-23
Size 23 Contacts, 5A
480 contacts
175 g (without panel)
10 mounting screws
1 panel cutout
FLEXIBLE MODULARITY
PAGE 6
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
TYPICAL CONFIGURATIONS
1 Modules tted with crimp contacts
2 Receptacle keying component
3 Receptacle
4 Plug keying component
5 Plug
6 Accessory in 2 halves
7 Chimneys
Wire-to-Wire Configuration
1 2 3 4 5 1 66 7
7
1 Modules tted with PCB contacts
2 Receptacle keying component
3 Fixing panel nuts
4 Receptacle
5 Flat gasket
6 Plug keying component
7 Panel
8 Panel-mount screws
9 Plug
10 Modules tted with crimp contacts
11 Accessory in 2 halves
12 Chimneys
Wire-to-Board Configuration
1 2 3 4 5 6 7 8 9 10 11 12
PAGE 7
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
MATERIALS
Shell: Aluminum alloy or composite, with electroless nickel or
olive drab cadmium nish
Module: Thermoplastic and uorinated silicone
Contact: Copper alloy, plated gold over nickel
Key: Aluminum alloy, with stainless steel lock nut
MECHANICAL/ENVIRONMENTAL
Durability: 500 mating cycles
Operating Temperature: -55°C to +175°C
Module Retention In Housing: 25.4 daN (57.1 lb.)
Contact Retention:
Size 24: 2.7 daN (6.1 lb.)
Size 23: 4.5 daN (10.1 lb.)
Size 22: 4.5 daN (10.1 lb.)
Size 20: 9.0 daN (20.2 lb.)
Size 16: 11.0 daN (24.7 lb.)
Size 12: 13.0 daN (29.2 lb.)
Size 08: 15.6 daN (35.1 lb.)
Salt Spray:
Aluminum cadmium nish: 500 hours
Aluminum nickel nish: 96 hours
Composite nickel nish: 500 hours
ELECTRICAL
Withstand Voltage:
At Sea Level:
Service I: 1300 Vrms 50 Hz, module size 24, 23 and 22
Service II: 1500 Vrms 50 Hz, module sizes 20, 16, 12 and 08
Altitude Immersion to 11 hPa (30,000 m/100,000 ft): 1000 Vrms 50 Hz
(all module sizes)
Insulation Resistance
At Sea Level: 5000 MΩ
Altitude Immersion to 11 hPa (30,000 m/100,000 ft): 1000 MΩ
Contact Current Rating (Sealed Connectors):
Size 24: 3 A
Size 23: 5 A
Size 22: 5 A
Size 20: 7.5 A
Size 16: 13 A
Size 12: 23 A
Size 08: 46 A (up to 90 A with specics contacts)
Shielding Eectiveness:
(With conductive shell nish and RFI spring ngers)
Frequency (MHz) Attenuation, Min. (dB)
Aluminum Shell Composite Shell
100 80 65
200 78 60
300 78 55
400 77 55
800 75 45
1000 75 45
1500 59 43
2000 55 40
3000 51 37
4000 48 35
6000 45 33
10,000 40 30
SPECIFICATIONS
PAGE 8
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
STACKABLE RECEPTACLES
DMC-M 82-01: 4 Modules
SHORT STACKABLE
RECEPTACLES
DMC-M 83-01: 4 Modules
DMC-M 42-01: 2 Modules
DMC-M 43-01: 2 Modules
80 ±0.1
[3.15 ±0.004]
3.8 ±0.1
[0.15 ±0.004]
3.3 ±0.1
[0.13 ±0.004]
81 ±0.1
[3.189 ±0.004]
5.05 ±0 .1
[0.199 ±0.004]
49.5 ±0.1
[1.949 ±0.004]
50.5 ±0.1
[1.988 ±0.004]
15.25
[0.6]
MAX.
86 .1
[3.39]
MAX.
4
[0.157 ]
MAX.
55.6
[2.189]
MAX.
2 oblong holes
Ø 3.2 ±0.05
[0.126 ±0.002]
2 times
19 .15
[0.754]
MAX.
26.8
[1.055]
MAX.
55.6
[2.189]
MAX.
3.8 ±0.1
[0.15 ±0.004]
3.3 ±0.1
[0.13 ±0.004]
4
[0.157 ]
MAX.
2 oblong holes
49.5 ±0.1
[1.949 ±0.004]
50.5 ±0.1
[1.988 ±0.004]
5.05 ±0 .1
[0.199 ±0.004]
86 .1
[3.39]
MAX.
Ø 3.2 ±0.05
[0.126 ±0.002]
2 times
19 .15
[0.754]
MAX.
23.1
[0.909]
MAX.
80 ±0.1
[3.15 ±0.004]
81 ±0.1
[3.189 ±0.004]
15.25
[0.6]
MAX.
RECEPTACLES
Note: No accessory can be mounted on the rear of short receptacle shell.
PAGE 9
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
FLANGE-MOUNT
RECEPTACLES
DMC-M 84-01: 4 Modules
SHORT FLANGE-MOUNT
RECEPTACLES
DMC-M 85-01: 4 Modules
DMC-M 44-01: 2 Modules
DMC-M 45-01: 2 Modules
Note: No accessory can be mounted on the rear of short receptacle shell.
DMC-MD shielded versions are delivered with a conductive flat gasket (part no. 108-0019-00 A1142 for 4-module receptacles and 108-0019-01 A1142
for 2-module receptacles). A sealing flat gasket (part no. 108-0019-00 for 4-module receptacles and 108-0019-01 for 2-module receptacles) is also
available but not supplied with receptacles.
4
[0.157 ]
MAX.
57.5
[2.264]
MAX.
5.05 ±0 .1
[0.199 ±0.004]
88
[3.465]
MAX.
19 .15
[0.754]
MAX.
26.8
[1.055]
MAX.
80 ±0.1
[3.15 ±0.004]
81 ±0.1
[3.189 ±0.004]
26.8
[1.055]
MAX.
3.8 ±0.1
[0.15 ±0.004]
3.3 ±0.1
[0.13 ±0.004]
2 oblong holes
49.5 ±0.1
[1.949 ±0.004]
50.5 ±0.1
[1.988 ±0.004]
5.05 ±0 .1
[0.199 ±0.004]
88
[3.465]
MAX.
19 .15
[0.754]
MAX.
23.6
[0.929]
MAX.
4
[0.157 ]
MAX.
57.5
[2.264]
MAX.
80 ±0.1
[3.15 ±0.004]
81 ±0.1
[3.189 ±0.004]
20.4
[0.803]
MAX.
3.8 ±0.1
[0.15 ±0.004]
3.3 ±0.1
[0.13 ±0.004]
2 oblong holes
49.5 ±0.1
[1.949 ±0.004]
50.5 ±0.1
[1.988 ±0.004]
RECEPTACLES
PAGE 10
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
TE PART NUMBERING SYSTEM DMC-MD 84 B 3 5 W 01 ****
CONNECTOR TYPE
DMC-M Standard
DMC-MD Shielded
HOUSING TYPE
Two-Module Receptacle
42 Standard
43 Short
44 Flange Mount Standard
45 Flange Mount Short
Four-Module Receptacle
82 Standard
83 Short
84 Flange Mount Standard
85 Flange Mount Short
SHELL DELIVERY CONFIGURATION (Optional)
Omit for Standard Keying Component Not Mounted
A Without Keying Component
B With Keying Component Coded, Mounted or Not Mounted
KEYING COMPONENT TYPE (Optional: B Configuration Only)
0 Type 0 (Black)
1 Type 1 (Purple)
2 Type 2 (Yellow)
3 Type 3 (Green)
4 Type 4 (Blue)
5 Type 5 (Orange)
6 Type 6 (White)
KEYING COMPONENT ORIENTATION IN THE RECEPTACLE (Optional)
Omit - Not mounted
1, 2, 3, 4, 5, 6
PLATING/FINISH (Optional)
Aluminum Alloy Shell
Omit - Black Nickel
W Olive Drab Cadmium
Composite Shell
M Nickel (Shell Types 82 and 83 Only)
J Olive Drab Cadmium (Shell Types 82 and 83 Only)
ISSUE
01
MODIFICATIONS (Optional)
A1064 Bright Nickel Finish
Consult TE for additional modications
RECEPTACLES
Keying Component Orientation
Viewed from front face of receptacle housing
Largest keyway indicates orientation
Keying Component Orientation
Viewed from front face of plug housing
Largest keyway indicates orientation
PAGES 9 and 10
PAGES 15 and 16
4
3
2
1
5 6
1
23
4
6
5
PAGE 11
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
EN4165 PART NUMBERING SYSTEM EN4165 W 7 A 4 3 5
CONNECTOR TYPE
EN4165
PLATING/FINISH (Optional)
Aluminum Alloy Shell
F Black Nickel
W Olive Drab Cadmium
Composite Shell
M Nickel (EN4165*0A4** Only)
J Olive Drab Cadmium (EN4165*0A4** Only)
HOUSING TYPE
0 Receptacle Housing
7 Flange-Mount Receptacle Housing
SERIES
A Series 2
B Series 3 (Consult TE)
COMPOSITION
2 2 Modules
4 4 Modules
KEYING COMPONENT TYPE
A Standard Keying Component (Black)
0 Without Keying Component
1 Type 1 (Purple)
2 Type 2 (Yellow)
3 Type 3 (Green)
4 Type 4 (Blue)
5 Type 5 (Orange)
6 Type 6 (White)
KEYING COMPONENT ORIENTATION IN THE RECEPTACLE
0 Not mounted
1, 2, 3, 4, 5, 6
RECEPTACLES
Keying Component Orientation
Viewed from front face of receptacle housing
Largest keyway indicates orientation
Keying Component Orientation
Viewed from front face of plug housing
Largest keyway indicates orientation
PAGES 9 and 10
PAGES 15 and 16
4
3
2
1
5 6
1
23
4
6
5
PAGE 12
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
TE PART NUMBERING SYSTEM DMC-MD 0484 A W 01 A
CONNECTOR TYPE
DMC-M Standard
DMC-MD Shielded (Includes Conductive Gasket)
SIZE/CAPACITY
1044 52 modules (13 rows)
0964 48 modules (12 rows)
0804 40 modules (10 rows)
0644 32 modules (8 rows)
0484 24 modules (6 rows)
0324 16 modules (4 rows)
0244 12 modules (3 rows)
0164 8 modules (2 rows)
Consult TE for other sizes
KEYING COMPONENT (Optional)
Omit - With Keying Component
A Without Keying Component
PLATING/FINISH (Optional)
Aluminum Alloy Shell
Omit - Black Nickel
W Olive Drab Cadmium
ISSUE
01
TYPE (Optional)
Omit - Standard Plate
A Short Plate (No Backshell Mount)
STANDARD PLATE SHORT PLATE
These multi-receptacle plates receive 4-module rack and panel plugs or free plugs.
No accessory can be mounted on the rear of the lightweight multi-receptacle versions.
No. of Rows 13 12 10 8 6 4 3 2
Version 1044 0964 0804 0644 0484 0324 0244 0164
Dim A 232.2
(9.142)
216.2
(8.512)
184.2
(7.252)
152.2
(5.992)
120.2
(4.732)
68.6
(2.701)
52.6
(2.071)
36.6
(1.437)
MULTI-RECEPTACLE PLATES
Dimensions are mm (inches)
3.7 ±1
[0.146
±0.039]
3.5 ±1
[0.138
±0.039]
A
8.85
[.348]
5.15
[0.283] 98.2
[3.866]
16
[0.630]
98.2
[3.866]
8.85
[.348]
5.15
[0.283]
16
[0.630]
A
3.5 ±1
[0.138
±0.039]
9.2 ±1
[0.362
±0.039]
PAGE 13
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
DMC-M receptacles use keying components to allow 6 mating
possibilities. An additional 6 keying orientations are possible
providing a total of 36 keying options thereby preventing connector
misalignment and mismating. Keying is especially useful for rack and
multiconnector applications. The keys are provided in sealed and
unsealed versions.
Type 01 02 03 04 05 06 10
TE (Standard) 732-8021-01 B 732-8021-02 B 732-8021-03 B 732-8021-04 B 732-8021-05 B 732-8021-06 B 732-8021-10 B
EN4165 EN4165R01 EN4165R02 EN4165R03 EN4165R04 EN4165R05 EN4165R06 EN4165R10
Type 01 02 03 04 05 06 10
TE (Sealed) 732-8174-01 732-8174-02 732-8174-03 732-8174-04 732-8174-05 732-8174-06 732-8174-10
The assembly coupling mechanism requires the use of the tool part no. 057-0590-80. It is delivered with a removable lock nut
(coupling torque 0.15 ±0.02 daN.m (13.3 ±6.1 in. lbf.]).
01 02 03 04 05 06 10
Violet Yellow Green Blue Orange White Standard Lock nut
732-8021-01 B
CD9
732-8021-02 B
CD9
732-8021-03 B
CD9
732-8021-04 B
CD9
732-8021-05 B
CD9
732-8021-06 B
CD9
732-8021-10 B
CD9
RECEPTACLE KEYING
732-8174-10
CD9
732-8021-10 B
CD9
TE (Standard)
EN4165
TE (Sealed)
(Not EN4165)
O-Ring
732-8174-10
CD9
732-8021-10 B
CD9
TE (Standard)
EN4165
TE (Sealed)
(Not EN4165)
O-Ring
Sealed Keying
Unsealed EN4165-Compliant Keying
PAGE 14
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
FREE PLUGS
DMC-M 80-01: 4 Modules
RACK AND PANEL PLUGS
DMC-M 88-01: 4 Modules
DMC-M 40-01: 2 Modules
DMC-M 48-01: 2 Modules
See page 40 for panel cutouts.
The receptacle/plug coupling is done with the tool 057-0592-80 or a standard Allen wrench (coupling torque 0.1 ±0.03 daN.m [8.8 ±2.6 in. lbf.]).
1.3
[0.051]
MAX.
Ø 5.2
[0.205]
MAX.
28 .1
[1.106]
MAX.
15 .1
[0.594]
MAX.
3.05 [0.594] Width across flats
Hexagon socket
6.7
[0.264]
MAX.
75.1
[2.957]
MAX.
44.60
[1.756]
MAX.
15 .1
[0.594]
MAX.
91
[3.583]
MAX.
60.5
[2.382]
MAX.
2 .1
[0.083]
MAX.
M3
28 .1
[1.106]
MAX. 30
[1.181]
MAX.
6
[0.236]
MAX.
PLUGS
PAGE 15
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
REVERSE RACK AND
PANEL PLUGS
DMC-M 89-01: 4 Modules
DMC-M 49-01: 2 Modules
See page 40 for panel cutouts.
PAGE 15
See page 40 for panel cutouts.
28.1
[1.106]
MAX.
DMC-M 49-01
CD9
DMC-M 89-01
CD9
M3
123
4
56
123
4
5
6
BCADAB
28.1
[1.106]
MAX.
6.5
[0.256]
MAX.
6.5
[0.256]
MAX.
34.7
[1.366]
MAX.
34.7
[1.366]
MAX.
88
[3.465]
MAX.
57.5
[2.264]
MAX.
PLUGS
PAGE 16
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
TE PART NUMBERING SYSTEM DMC-MD 89 B 3 5 W 01 ****
CONNECTOR TYPE
DMC-M Standard
DMC-MD Shielded
HOUSING TYPE
Two-Module Receptacle
40 Free Plug
48 Rack and Panel Plug
49 Reversed Rack and Panel Plug
Four-Module Receptacle
80 Free Plug
88 Rack and Panel Plug
89 Reversed Rack and Panel Plug
SHELL DELIVERY CONFIGURATION (Optional)
Omit for Standard Keying Component Not Mounted
A Without Keying Component
B With Keying Component Coded, Mounted or Not Mounted
KEYING COMPONENT TYPE (Optional: B Configuration Only)
0 Type 0 (Black)
1 Type 1 (Purple)
2 Type 2 (Yellow)
3 Type 3 (Green)
4 Type 4 (Blue)
5 Type 5 (Orange)
6 Type 6 (White)
KEYING COMPONENT ORIENTATION IN THE RECEPTACLE (Optional)
Omit - Not Mounted
1, 2, 3, 4, 5, 6
PLATING/FINISH (Optional)
Aluminum Alloy Shell
Omit - Black Nickel
W Olive Drab Cadmium
Composite Shell
M Nickel (Shell Type 80 Only)
J Olive Drab Cadmium (Shell Type 80 Only)
ISSUE
01
MODIFICATIONS (Optional)
A1064 Bright Nickel Finish
Consult TE for additional modications
PLUGS
Keying Component Orientation
Viewed from front face of receptacle housing
Largest keyway indicates orientation
Keying Component Orientation
Viewed from front face of plug housing
Largest keyway indicates orientation
PAGES 9 and 10
PAGES 15 and 16
4
3
2
1
5 6
1
23
4
6
5
PAGE 17
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
EN4165 PART NUMBERING SYSTEM EN4165 W 9 A 4 R 3 5
CONNECTOR TYPE
EN4165
PLATING/FINISH)
Aluminum Alloy Shell
F Black Nickel
W Olive Drab Cadmium
Composite Shell
M Nickel (EN4165*6A4** Only)
J Olive Drab Cadmium (EN4165*6A4** Only)
HOUSING TYPE
6 Free Plug
9 Rack and Panel Plug
SERIES
A Series 2
B Series 3 (Consult TE)
SIZE
2 2 Modules
4 4 Modules
RACK AND PANEL ORIENTATION (Optional)
Omit - Standard
R Reversed
KEYING COMPONENT TYPE (B Configuration Only)
A Standard Keying Component (Black)
0 Without Keying Component
1 Type 1 (Purple)
2 Type 2 (Yellow)
3 Type 3 (Green)
4 Type 4 (Blue)
5 Type 5 (Orange)
6 Type 6 (White)
KEYING COMPONENT ORIENTATION IN THE RECEPTACLE
0 Not Mounted
1, 2, 3, 4, 5, 6
PLUGS
Keying Component Orientation
Viewed from front face of receptacle housing
Largest keyway indicates orientation
Keying Component Orientation
Viewed from front face of plug housing
Largest keyway indicates orientation
PAGES 9 and 10
PAGES 15 and 16
4
3
2
1
5 6
1
23
4
6
5
PAGE 18
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
DMC-M plugs use an optional keying component to allow 6 mating
possibilities. An additional 6 keying orientations are possible
providing a total of 36 keying options thereby preventing connector
misalignment and mismating. Keying is especially useful for rack and
multiconnector applications.
The assembly of these keys is toolless. Once clipped into their cavities,
keys must be broken to be removed.
VioletYellow Green Blue Orange White Standard
01 02 03 04 05 06 10
732-8020-01
732-8020-03
CD9
732-8020-02
CD9
CD9
732-8020-04
732-8020-05
732-8020-06
732-8020-10
CD9
CD9
CD9
CD9
Type 01 02 03 04 05 06 10
TE 732-8020-01 732-8020-02 732-8020-03 732-8020-04 732-8020-05 732-8020-06 732-8020-10
EN4165 EN4165P01 EN4165P02 EN4165P03 EN4165P04 EN4165P05 EN4165P06 EN4165P10
PLUG KEYING
PAGE 19
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Arrangement Configuration
Pin Contacts Socket Contacts
View Part No. View Part No.
30-23 30 Contacts, Size 23 DMC-MR 30-23 AN DMC-MR 30-23 BN
20-22 20 Contacts, Size 22
DMC-M 20-22 AN
BACI10BC2022PNB
EN4165A20-221NA
DMC-M 20-22 BN
BACI10BC2022SNB
EN4165A20-221NB
20-22* 20 Contacts, Size 22 DMC-MA 20-22 AN
EN4165A20A221NA
DMC-MA 20-22 BN
EN4165A20A221NB
12-20 12 Contacts, Size 20
DMC-M 12-20 AN
BACI10BC1220PNB
EN4165A12-201NA
DMC-M 12-20 BN
BACI10BC1220SNB
EN4165A12-201NB
08-16 8 Contacts, Size 16
DMC-M 08-16 AN
BACI10BC0816PNB
EN4165A08-161NA
DMC-M 08-16 BN
BACI10BC0816SNB
EN4165A08-161NB
04-12 4 Contacts, Size 12 DMC-M 04-12 AN
EN4165A04-121NA
DMC-M 04-12 BN
EN4165A04-121NB
01-08 1 Contact, Size 08 DMC-M 01-08 AN
EN4165A01-081NA
DMC-M 01-08 BN
EN4165A01-081NB
99-01 6 Contacts, Size 16
5 Contacts, Size 22
DMC-M 99-01 AN
BACI10BC1622PNB
EN4165A99-011NA
DMC-M 99-01 BN
BACI10BC1622SNB
EN4165A99-011NB
99-01* 6 Contacts, Size 16
5 Contacts, Size 22
DMC-MA 99-01 AN
EN4165A99A011NA
DMC-MA 99-01 BN
EN4165A99A011NB
99-06 8 Contacts, Size 22
2 Contacts, Size 12
DMC-M 99-06 AN
BACI10BC1001PNB
DMC-M 99-06 BN
BACI10BC1001SNB
99-10 8 Contacts, Size 20
2 Contacts, Size 16
DMC-M 99-10 AN
EN4165A99-101NA
DMC-M 99-10 BN
EN4165A99-101NB
ELECTRICAL MODULES / AS39029/57 AND /58 AND EN3155 CONTACT COMPLIANT
* DMC-MA connector modules are compatible
with aluminium cable contacts and with
EN3155-070 / 071 size 22 contacts (for copper cable)
DEUTSCH Part Numbers (DMC-M)
BACI10BC Part Numbers
EN4165 Part Numbers
Aluminium cable technology possible
with size 22 contacts
MODULES
Arrangement Configuration
Pin Contacts Socket Contacts
View Part No. View Part No.
99-10 8 Size 20 Contacts
2 Size 16 Contacts
DMC-MB 99-10 AN
BACI10BC0910PNB
DMC-MB 99-10 BN
BACI10BC0910SNB
12-20 12 Size 20 Contacts DMC-MB 12-20 AN
BACI10BC1220APNB
DMC-MB 12-20 BN
BACI10BC1220ASNB
ELECTRICAL MODULES / BACC47 CONTACT COMPLIANT
PAGE 20
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Configuration View Part No.
Blanking Module DMC-M 00-00 PN
EN4165-1N
Arrangement Configuration View Part No.
22-05 20 Contacts, Size 22
5 Shunts 4 Ways
DMC-M 22-05 BN
EN4165A20Y221NB
22-07
20 Contacts, Size 22
3 Shunts 4 Ways
4 Shunts 2 Ways
DMC-M 22-07 BN
EN4165A2AY221NB
22-10 20 Contacts, Size 22
10 Shunts 2 Ways
DMC-M 22-10 BN
EN4165A2BY221NB
BLANKING MODULES SHUNT MODULES
Distribution shunt modules use dedicated contacts based on
standard AS39029. The shunt modules can only be mated with
DMC-M 20-22 AN or DMC-MA 20-22 AN modules.
DEUTSCH Part Numbers (DMC-M)
BACI10BC Part Numbers
EN4165 Part Numbers
Arrangement Configuration
Pin Contacts Socket Contacts
View Part No. View Part No.
16-02
6 Contacts, Size 16
2 Contacts, Size 22
8 Contacts, Size 24
2226454-1
DMC-M 16-02 AN
266455-1
DMC-M 16-02 BN
99-02 8 Contacts, Size 22
3 Contacts, Size 20 DMC-M 99-02 AN DMC-M 99-02 BN
99-03 8 Contacts, Size 20
8 Contacts, Size 24 DMC-M 99-03 AN DMC-M 99-03 BN
99-04
6 Contacts, Size 20
2 Contacts, Size 22
8 Contacts, Size 24
DMC-M 99-04 AN DMC-M 99-04 BN
HIGH-SPEED ETHERNET MODULES
Arrangement Configuration
Pin Contacts Socket Contacts
View Part No. View Part No.
01-09 1 Quadrax Contact DMC-M 01-08 AN-GQ
EN4165A01Q281NA
DMC-M 01-08 BN-GQ
EN4165A01Q281NB
QUADRAX MODULES
MODULES
Arrangement Configuration
Pin Contacts
View Part No.
08-16 8 Size 16 Contacts DMC-M 08-16 AN-G
EN4165A08G161NA
04-12 4 Size 12 Contacts DMC-M 04-12 AN-G
EN4165A04G121NA
01-08 1 Size 08 Contact DMC-M 01-08 AN-G
EN4165A02G081NA
DMC-M 01-08 BN-G
EN4165A02G081NB
GROUNDING MODULES
PAGE 21
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Module Dimensions (Except Fiber Optic Modules)
SERIES 2 MODULES
Polarization Keys
(Module viewed from front face)
L2 MAX.
14.1
[0.555]
15
[0.591]
L1 MAX.
14.1
[0.555]
15
[0.591]
Modules for Contact Size L1 (Short) L2 (Long)
24, 23, 22, 20, 16, 12 16.46 (0.648) 22.40 (0.882)
08 18.70 (0.736) 33.20 (1.307)
Module extraction is done with the tool part no. 057-0289-00 A or B.
The module insertion into the plug or receptacle is done manually.
NA BCD
NNNNN
Each module can have a specific polarization key A, B, C or D. The polarized modules must
be installed in a similarly polarized shell cavity. N-keyed modules will fit into all shells.
MODULES
Configuration
Module Part No.
Alignment Sleeve
Pin Part No. Socket Part No.
6 MC5
Termini 458235 458238 458237-C (Ceramic)
458237-M (Metal)
1 MT Ferrule
(12 or 24 Fibers) DMC-M01-MC6N DMC-M01-MC6N Not required
2 ARINC 801 Termini
5 Contacts, Size 16
2 Contacts, Size 22
459736
459736-P (With Contacts)
459823 (Right Angle)
459737 (Ceramic Sleeve)
459737-S (Ceramic Sleeve with Contacts)
459737-M (Metal Sleeve)
459737-M-S (Metal Sleeve with Contacts)
Included with
socket module
FIBER OPTIC AND HYBRID MODULES
PAGE 22
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
TE PART NUMBERING SYSTEM DMC-M 20-22 A N E
Standard Modules
CONNECTOR TYPE
DMC-M
ARRANGEMENT
See Pages 19 - 21
CONTACTS*
P Standard Male Contact
S Standard Female Contact
A Without Male Contact
B Without Female Contact
C Male Contact, Enlarged Crimp Barrel
D Female Contacts, Enlarged Crimp Barrel
POLARIZATION
N, A, B, C, D
SEALING (Optional)
Omit - Standard (No Sealing)
E Sealed
MODULES
EN4165 PART NUMBERING SYSTEM EN4165 A 20-22 2 N A
Standard Modules
CONNECTOR TYPE
EN4165
MODULE SERIES
A Series 2
B Series 3 (Consult TE)
ARRANGEMENT
See Pages 19 - 21
SEALING
1 Unsealed
2 Sealed
POLARIZATION
N, A, B, C, D
CONTACTS*
F Standard Female Contact
M Standard Male Contact
A Without Male Contact
B Without Female Contact
C Male Contact, Enlarged Crimp Barrel
D Female Contacts, Enlarged Crimp Barrel
*Standard contacts compliant with AS39029 and EN3155
PAGE 23
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
MODULES
TE PART NUMBERING SYSTEM DMC-MA 20-22 A N
Aluminum Cable Compliant Modules
CONNECTOR TYPE
DMC-MA
ARRANGEMENT
20-22
99-01
CONTACTS
A Without Male Contact
B Without Female Contact
POLARIZATION
N, A, B, C, D
EN4165 PART NUMBERING SYSTEM EN4165 A 20A22 1 N A
Aluminum Cable Compliant Modules
CONNECTOR TYPE
EN4165
MODULE SERIES
A Series 2
B Series 3 (Consult TE)
ARRANGEMENT
20A22
99A01
SEALING
1 Unsealed
POLARIZATION
N, A, B, C, D
CONTACTS
A Without Male Contact
B Without Female Contact
Note: DMC-MA connector modules are compatible with aluminum cable contacts and with EN4165-070/071 size 22 contacts for copper cable.
PAGE 24
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
TE PART NUMBERING SYSTEM DMC-M 01-08 B N - G W
Grounding Modules
CONNECTOR TYPE
DMC-M
MODULE TYPE
01-08
04-12
08-16
CONTACTS
P Standard Male Contact
S Standard Female Contact
A Without Male Contact
B Without Female Contact
POLARIZATION
N, A, B, C, D
GROUNDING
G
PLATING/FINISH (Optional)
Aluminum Alloy
Omit - Black Nickel
W Olive Drab Cadmium
MODULES
EN4165 PART NUMBERING SYSTEM EN4165 A 01G 08 2 N B
Grounding Modules
CONNECTOR TYPE
EN4165
MODULE SERIES
A Series 2
B Series 3 (Consult TE)
ARRANGEMENT
01G08
04G12
08G16
SEALING
1 Unsealed
2 Sealed
POLARIZATION
N, A, B, C, D
CONTACTS
F Standard Female Contact
M Standard Male Contact
A Without Male Contact
B Without Female Contact
C Male Contact, Enlarged Crimp Barrel
D Female Contacts, Enlarged Crimp Barrel
PAGE 25
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
EN4165 PART NUMBERING SYSTEM EN4165 A 01Q28 2 N B
Quadrax Modules
FAMILY
EN4165
MODULE SERIES
A Series 2
B Series 3 (Consult TE)
ARRANGEMENTS
1Q28
SEALING
1 Unsealed
2 Sealed
POLARIZATION
N, A, B, C, D
CONTACTS
A Without Male Contact
B Without Female Contact
MODULES
TE PART NUMBERING SYSTEM DMC-M 01-08 B N G Q W
Quadrax Modules
CONNECTOR TYPE
DMC-M
ARRANGEMENT
01-08 Only
CONTACT TYPE
A Without Male Contact
B Without Female Contact
POLARIZATION
N, A, B, C, D
GROUNDING
G
QUADRAX
Q
PLATING/FINISH (Optional)
Aluminum Alloy
Omit - Black Nickel
W Olive Drab Cadmium
PAGE 26
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
MODULES
TE PART NUMBERING SYSTEM DMC-M 22-05 B N
Shunt Modules
CONNECTOR TYPE
DMC-M
ARRANGEMENTS
22-05 5 Shunts 4 Ways
22-07 3 Shunts 4 Ways and 4 Shunts 2 Ways
22-10 10 Shunts 2 Ways
CONTACT TYPE
S Female Contact
B Without Female Contact
POLARIZATION
N, A, B, C, D
EN4165 PART NUMBERING SYSTEM EN4165 A 20Y22 1 N B
Shunt Modules
FAMILY
EN4165
MODULE SERIES
A Series 2
B Series 3 (Consult TE)
ARRANGEMENTS
20Y22 5 Shunts 4 Ways
2AY22 3 Shunts 4 Ways and 4 Shunts 2 Ways
2BY22 10 Shunts 2 Ways
SEALING
1 Unsealed
POLARIZATION
N, A, B, C, D
CONTACT TYPE
B Without Female Contact
F With Female Contact
PAGE 27
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
SHIELDED ACCESSORY BODIES
732-8054-10 A: 4 Modules 732-8054-14 A: 2 Modules
TE PART NUMBERING SYSTEM 732 8052 00 W A
FAMILY
732
TYPE (Used With)
8052 Free Plug
8053 Rack and Panel Plug
8054 Receptacle
SHELL
Two-Module Accessory
01 2 Round Chimneys
14 No Chimney
Four-Module Accessory
00 4 Round Chimneys
10 No Chimney
PLATING/FINISH (Optional)
Aluminum Alloy Body
Omit - Black Nickel
W Olive Drab Cadmium
Composite Body
M Nickel (For Shell Types 00 and 10 Only)
J Olive Drab Cadmium (For Shell Types 00 and 10 Only)
ISSUE
A
15.2
[0.598]
MAX.
75
[2.953]
MAX.
2 7. 2
[1.071]
MAX.
32.2
[1.268]
MAX.
Ø 11. 05
[0.435]
MAX.
14.2
[0.559]
MAX.
4.1
[0.161]
MAX.
30 .1
[1.185]
MAX.
14.2
[0.559]
MAX.
4.1
[0.161]
MAX.
15.2
[0.598]
MAX.
44.50
[1.752]
MAX.
32.2
[1.268]
MAX.
ACCESSORIES
PAGE 28
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
EN PART NUMBERING SYSTEM EN4165 F 14 P 4
FAMILY
EN4165
PLATING/FINISH
Aluminum Alloy Body
F Black Nickel
W Olive Drab Cadmium
Composite Body
M Nickel (For Shell Types P4 and R4 Only)
J Olive Drab Cadmium (For Shell Types P4 and R4 Only)
BODY
14 Shielded Accessory Body
TYPE (Used With)
P Free Plug
R Receptacle and Rack and Panel Plug
SHELL
2 2 Modules
4 4 Modules
ACCESSORIES
PAGE 29
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
NONSHIELDED CABLE CLAMPS
732-8002-00: 4 Modules 732-8002-01: 2 Modules
TE PART NUMBERING SYSTEM 732 8002 00 W
FAMILY
732
MATERIAL
8002 Metal
8040 PEI Plastic
SIZE
00 4 Module (Metal)
00A 4 Module (PEI)
01 2 Module (Metal and PEI)
PLATING/FINISH (Optional: Metal Clamps Only)
Omit - Black Nickel
W Olive Drab Cadmium
EN PART NUMBERING SYSTEM EN4165 F 13 A 4
FAMILY
EN4165
PLATING/FINISH
F Black Nickel
W Olive Drab Cadmium
TYPE
13 Cable Clamp
SERIES
A Series 2
B Series 3 (Consult TE)
SIZE
2 2 Modules
4 4 Modules
33
[1.299]
MAX.
2 7. 2
[1.071]
MAX.
4.1
[0.161]
MAX.
6
[0.236]
MAX.
15.2
[0.598]
MAX.
44.5
[1.752]
MAX.
Ø 12
[0.472]
MAX.
75
[2.953]
MAX.
24
[0.945]
MAX.
ACCESSORIES
PAGE 30
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
14.55
[0.573]
MAX.
29.3
[1.154]
MAX.
23.7
[0.933]
MAX.
8.87
[0.349]
MIN.
11.8 3
[0.466]
MAX.
R = 5.0 ±0.3
[0.197 ±0.012]
9.0 ±0.2
[0.354 ±0.008]
15.5 ±0.3
[0.61 ±0.012]
18.5
[0.711]
MAX.
1.1
[0.043]
MAX.
13.1
[0.516]
MAX.
26.6
[1.047]
MAX.
Ø 9.45
[0.372]
MIN.
Ø 14.3
[0.563]
MAX.
5.0
[0.197]
MAX.
1.1
[0.043]
MAX.
18.05
[0.711]
MAX.
13.1
[0.516]
MAX.
1.1
[0.043]
MAX.
9.1
[0.358]
MAX.
Ø 9.45
[0.372]
MIN.
Ø 14.3
[0.563]
MAX.
Ø 10.55
[0.412]
MAX.
Ø 11.05
[0.435]
MAX.
CHIMNEYS FOR SHIELDED ACCESSORIES
732-8052-12 A: Double Oval Chimney (1 for 2 cavities, for 4-module accessories only)
732-8052-11 A:
Round Chimney (1 per cavity)
732-8052-13 A:
Blank Chimney (1 per cavity)
ACCESSORIES
PAGE 31
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
TE PART NUMBERING SYSTEM 732-8052 11 W A
FAMILY
732-8052
TYPE
11 Round Chimney
12 Double Oval Chimney
13 Blank Chimney
18 Anti-Rotational Round Chimney
19 Anti-Rotational Round Chimney with Tie Wrap Option
PLATING/FINISH
Omit for Black Nickel
W Olive Drab Cadmium
ISSUE
A
EN PART NUMBERING SYSTEM EN4165 16 F
STANDARD
EN4165
TYPE
15 Round Chimney
15A Anti-Rotational Round Chimney with Tie Wrap Option
16 Double Oval Chimney
17 Blank Chimney
PLATING/FINISH
F Black Nickel
W Olive Drab Cadmium
ACCESSORIES
732-8052-18 A : Anti-Rotation Round Chimney 732-8052-19 A: Ani-Rotation Round Chimney with
Tie Wrap Option
CD-9-732-8052-19A
CD9-732-8052-18A
Ø10.55
[0.415]
MAX.
Ø14.3
[0.563]
MAX.
13.1
[0.516]
MAX.
Ø11.05
[0.435]
9.1
[0.358]
MAX.
1.1
[0.043]
MAX. Ø9.45
[0.372]
MIN.
18.4
[0.724]
MAX.
13.1
[0.516]
MAX.
1.1
[0.043]
MAX. Ø9.45
[0.372]
MIN.
Ø11.05
[0.435]
Ø14.3
[0.563]
MAX.
9.1
[0.358]
MAX.
Ø10.55
[0.415]
MAX.
0.75
[0.030]
20
[0.787]
MAX. 24.3
[0.957]
MAX.
11
[0.433]
MAX.
11
[0.433]
MAX.
CHIMNEYS FOR SHIELDED ACCESSORIES
732-8052-18 A:
Anti-Rotational Round Chimney
732-8052-19 A
Anti-Rotational Round Chimney with Tie Wrap Option
PAGE 32
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Receptacles
Multi-Receptacle Housings
Plugs
Receptacle Keying Component
Type Nickel Finish Olive Drab Cadmium Finish Mass,
Max. (g) Page
TE Part No. EN Part No. TE Part No. EN Part No.
2-Module Plugs
Free Hanging (Aluminum) DMC-M 40 A 01 EN4165F6A200 DMC-M 40 AW 01 EN4165W6A200 22 14
Rack and Panel DMC-M 48 A 01 EN4165F9A200 DMC-M 48 AW 01 EN4165W9A200 33 14
Reversed Rack and Panel DMC-M 49 A 01 EN4165F9A2R00 DMC-M 49 AW 01 EN4165W9A2R00 33 15
4-Module Plugs
Type Nickel Finish Olive Drab Cadmium Finish Mass,
Max. (g) Page
TE Part No. EN Part No. TE Part No. EN Part No.
Free Hanging (Aluminum) DMC-M 80 A 01 EN4165F6A400 DMC-M 80 AW 01 EN4165W6A400 22 14
Free Hanging (Composite) DMC-MD 80 AM EN4165M6A400 DMC-MD 80 AJ EN4165J6A400 19 14
Rack and Panel DMC-M 88 A 01 EN4165F9A400 DMC-M 88 AW 01 EN4165W9A400 38 14
Reversed Rack and Panel DMC-M 89 A 01 EN4165F9A4R00 DMC-M 89 AW 01 EN4165W9A4R00 38 15
Type Nickel Finish Olive Drab Cadmium Finish Mass,
Max. (g) Page
TE Part No. EN Part No. TE Part No. EN Part No.
2-Module Receptacles
Standard DMC-M 42 A 01 EN4165F0A200 DMC-M 42 AW 01 EN4165W0A200 17 8
Short DMC-M 43 A 01 DMC-M 43 AW 01 15 8
Flange Mount DMC-M 44 A 01 EN4165F7A200 DMC-M 44 AW 01 EN4165W7A200 22 9
Short, Flange Mount DMC-M 45 A 01 DMC-M 45 AW 01 21 9
4-Module Receptacles
Standard (Aluminum) DMC-M 82 A 01 EN4165F0A400 DMC-M 82 AW 01 EN4165W0A400 22 8
Standard (Composite) DMC-MD 82 AM 01 EN4165M0A400 DMC-MD 82 AJ 01 EN4165J0A400 15 8
Short (Aluminum) DMC-M 83 A 01 DMC-M 83 AW 01 20 8
Short (Composite) DMC-MD 83 AM 01 DMC-MD 83 AJ 01 14 8
Flange Mount DMC-M 84 A 01 EN4165F7A400 DMC-M 84 AW 01 EN4165W7A400 28 9
Short, Flange Mount DMC-M 85 A 01 DMC-M 85 AW 01 27 9
Size (No. of Modules) Type TE Part No. Mass (g) Page
8Standard DMC-M 0164-01 98 12
Lightweight DMC-M 0164-01 A 55 12
12 Standard DMC-M 0244-01 127 12
Lightweight DMC-M 0244-01 A 75 12
16 Standard DMC-M 0324-01 156 12
Lightweight DMC-M 0324-01 A 95 12
24 Standard DMC-M 0484-01 214 12
Lightweight DMC-M 0484-01 A 131 12
32 Standard DMC-M 0644-01 273 12
Lightweight DMC-M 0644-01 A 171 12
40 Standard DMC-M 0804-01 331 12
Lightweight DMC-M 0804-01 A 211 12
48 Standard DMC-M 0964-01 390 12
Lightweight DMC-M 0964-01 A 251 12
52 Standard DMC-M 1044-01 419 12
Lightweight DMC-M 1044-01 A 271 12
Type TE Part No. EN Part No. Mass, Max. (g) Page
Keying 732-8021-** B EN4165R** 2.5 13
MASSES
PAGE 33
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Modules
Plug Keying Component
Insert Contact Type TE Part No. EN Part No. Mass, Max. (g) Page
Standard Modules
00-00 (Blank) DMC-M 00-00 PN EN4165-1N 3.0 20
01-08 Male DMC-M 01-08 A* EN4165A01-081*A 2.9 19
Female DMC-M 01-08 B* EN4165A01-081*B 4.4 19
04-12 Male DMC-M 04-12 A* EN4165A04-121*A 2.8 19
Female DMC-M 04-12 B* EN4165A04-121*B 3.7 19
08-16 Male DMC-M 08-16 A* EN4165A08-161*A 2.9 19
Female DMC-M 08-16 B* EN4165A08-161*B 3.9 19
12-20 Male DMC-M 12-20 A* EN4165A12-201*A 3.2 19
Female DMC-M 12-20 B* EN4165A12-201*B 4.1 19
20-22 Male DMC-M 20-22 A* EN4165A20-221*A 3.1 19
Female DMC-M 20-22 B* EN4165A20-221*B 4.1 19
99-01 Male DMC-M 99-01 A* EN4165A99-011*A 2.4 19
Female DMC-M 99-01 B* EN4165A99-011*B 3.2 19
99-06 Male DMC-M 99-06 A* ?? 19
Female DMC-M 99-06 B* ?? 19
99-10 Male DMC-M 99-10 A* EN4165A99-101*A 3.2 19
Female DMC-M 99-10 B* EN4165A99-101*B 4.2 19
High-Density Modules
30-23 Male DMC-MR 30-23 A* 3.4 19
Female DMC-MR 30-23 B* 2.5 19
Aluminum Cable Compatible Modules
20-22 Male DMC-MA 20-22 A* EN4165A20A221*A 2.9 19
Female DMC-MA 20-22 B* EN4165A20A221*B 3.2 19
99-01 Male DMC-MA 99-01 A* EN4165A99A011*A 2.9 19
Female DMC-MA 99-01 B* EN4165A99A011*B 3.7 19
Grounding Modules
01-08 Male DMC-M 01-08 A*-G* EN4165A01G081*A 3.6 20
Female DMC-M 01-08 B*-G* EN4165A01G081*B 7.5 20
04-12 Male DMC-M 04-12 A*-G* EN4165A04G121*A 3.8 20
Female DMC-M 04-12 B*-G* EN4165A04G121*B 6.7 20
08-16 Male DMC-M 08-16 A*-G* EN4165A08G161*A 3.9 20
Female DMC-M 08-16 B*-G* EN4165A08G161*B 6.9 20
BACC47 Contact Compliant
99-10 Male DMC-MB 99-10 A* 2.9 19
Female DMC-MB 99-10 B* 4.1 19
12-20 Male DMC-MB 12-20 A* 2.9 19
Female DMC-MB 12-20 B* 4.1 19
Type TE Part No. EN Part No. Mass, Max. (g) Page
Keying 732-8020-** EN4165P** 0.7 18
MASSES
PAGE 34
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Modules (continued)
Insert Contact Type TE Part No. EN Part No. Mass, Max. (g) Page
Quadrax Modules
01-08 (Ni) Male DMC-M 01-08 A*-GQ EN4165A01Q281*A 3.5 20
Female DMC-M 01-08 B*-GQ EN4165A01Q281*B 7.4 20
01-08 (Cd) Male DMC-M 01-08 A*-GQW 3.5 20
Female DMC-M 01-08 B*-GQW 7.4 20
Shunt Modules
20-22 (5 Shunts 4 Ways) Female DMC-M 22-05 B* EN4165A20Y221*B 3.8 20
20-22 (3 Shunts 4 Ways and
4 Shunts 2 Ways) Female DMC-M 22-07 B* EN4165A2AY221*B 3.7 20
20-22 (10 Shunts 2 Ways) Female DMC-M 22-10 B* EN4165A2BY221*B 3.7 20
High-Speed Modules
99-02 Male DMC-M 99-02 A* 3.6 20
Female DMC-M 99-02 B* 4.4 20
99-03 Male DMC-M 99-03 A* 2.5 20
Female DMC-M 99-03 B* 3.35 20
99-04 Male DMC-M 99-04 A* 2.9 20
Female DMC-M 99-04 B* 3.4 20
16-02
Male 2226454-1 /
DMC-M 16-02 A* 2.5 20
Female 2226455-1 /
DMC-M 16-02 B* 3.4 20
Optical and Hybrid Modules
MC5 Male 458235 5.5 21
Female 458238 8.9 21
T47 Hybrid Male 459736-x 4.3 21
Female 459739-x 5.3 21
MC6 Hermaphroditic DMC-M01-MC6N 12.5 21
MASSES
PAGE 35
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Shielded Accessory Bodies
Non-Shielded Cable Clamps
Chimneys for Shielded Accessories
MASSES
Type Nickel Finish Olive Drab Cadmium Finish Mass,
Max. (g) Page
TE Part No. EN Part No. TE Part No. EN Part No.
2-Module Plugs
Free Hanging 732-8052-14 A EN4165F14P2 732-8052-14 WA EN4165W14P2 25 27
Rack and Panel 732-8053-14 A 732-8053-14 23 27
4-Module Plugs
Free Hanging (Aluminum) 732-8052-10 A EN4165F14P4 732-8052-10 WA EN4165W14P4 34 27
Free Hanging (Composite) 732-8052-10 M EN4165M14P4 732-8052-10 J EN4165J14P4 26 27
Rack and Panel 732-8053-10 A 732-8053-10 WA 32 27
2-Module Receptacles
Standard and Short 732-8054-14 A EN4165F14R2 732-8054-14 WA EN4165W14R2 23 27
4-Module Receptacles
Standard and Short 732-8054-10 A EN4165F14R4 732-8054-10 WA EN4165W14R4 32 27
Type Nickel Finish Olive Drab Cadmium Finish Mass,
Max. (g) Page
TE Part No. EN Part No. TE Part No. EN Part No.
Round 732-8052-11 A EN4165F15 732-8052-11 WA EN4165W15 1.5 30
Double Oval 732-8052-12 A EN4165F16 732-8052-12 WA EN4165W16 3.5 30
Blank 732-8052-13 A EN4165F17 732-8052-13 WA EN4165W17 2 30
Anti-Rotation Round 732-8052-18 A 732-8052-18 WA 1.55 31
Anti-Rotation Round/Tie Wrap 732-8052-19 A EN4165F15A 732-8052-19 WA EN4165W15A 1.7 30
Type Nickel Finish Olive Drab Cadmium Finish Mass,
Max. (g) Page
TE Part No. EN Part No. TE Part No. EN Part No.
4-Module Shells 732-8002-00 EN4165F13A4 732-8002-00 W EN4165W13A4 34 29
2-Module Shells 732-8002-01 EN4165F13A2 732-8002-01 W EN4165W13A2 22 29
PAGE 36
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
ELECTRICAL CONTACTS
Color Coding
Pin: AS39029/58
Socket: AS39029/57
Color Coding
Pin and Socket: EN3155
Size Part No. Type Color Bands Wire Range
AS39029 EN3155 AWG mm2
24/24 724-0001-24 Pin 26-24 0.15 - 0.25
724-0003-24 Socket
23/22 182-4043-23 Pin Green-Purple 26-22 0.15 - 0.4
182-4042-23 Socket
22/22 724-0001-22 Pin Orange-Blue-Black Green-Green 26-22 0.15 - 0.40
724-0003-22 Socket Orange-Green-Yellow
22/20 182-0860-22 Pin Red-Green 24-20 0.25 - 0.60
182-0862-22 Socket
20/20 724-0001-20 Pin Orange-Blue-Orange Red-Red 24-20 0.25 - 0.60
724-0003-20 Socket Orange-Green-Purple
20/18 724-1063-20 Pin Brown-Red 24-18 0.25 - 1.00
724-1064-20 Socket
16/16 724-0001-16 Pin Orange-Blue-Yellow Blue-Blue 20-16 0.60 - 1.20
724-0003-16 Socket Orange-Green-Gray
16/14 724-1063-16 Pin White-Blue 20-14 0.60 - 2.00
724-1064-16 Socket
12/12 724-0001-12 Pin Orange-Blue-Green Yellow-Yellow 14-12 2.00 - 3.00
724-0003-12 Socket Orange-Green-White
12/10 724-1063-12 Pin White-Yellow 12-10 3.00 - 5.00
724-1064-12 Socket
08 (Power) 724-0001-08 Pin 08 5.30 - 8.98
724-0003-08 Socket
08 (Power) 182-0001-08 Pin 08
182-0003-08 Socket
Microcoax 724-0004-16 Pin Yellow-Red-Yellow KX 22 0.057 - 0.158
724-0005-16 Socket Yellow-Orange-Red
08 (Coax) 182-0125-08 Pin ALPEN A 26 DT
182-0126-08 Socket
08 182-0048-08 Pin SMA Interface
182-0044-08 Socket
22 (Shunt) 724-1272-22 Socket 26-22 0.15 - 0.40
Databus Contacts (Twisted Pair) As Per AS39029
Cable Type Part No. Type Color Bands Conductor Size, Max. Braid OD, Max.
Single Braid 182-0034-03 Pin Brown-Red 2 x 0.34 mm23.48
182-0035-03 Skt
Double Braid 182-0034-04 Pin Red-Red 2 x 0.34 mm23.91
Olive Drab Cadmium Skt
213 2
31
Inspection hole Inspection hole
21 12
CONTACTS
Bold part numbers are standard contacts delivered with modules.
PAGE 37
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
TOOLING
Part No. Crimp Tool Positioner Insertion/Extraction
Tool
Part No. Mil Part No. Part No. Mil Part No.
724-0001-24
724-0003-24 057-0463-12 M22520/2-01 057-1030-02
057-1030-01 605837-22
182-4043-23
182-4042-23 057-0463-12 M22520/2-01 057-0467-32
057-0515-32
M22520/2-09
M22520/2-06 M81969/14-01
724-0001-22
724-0003-22 057-0463-12 M22520/2-01 057-0467-32
057-0515-32
M22520/2-09
M22520/2-06 M81969/14-01
182-0860-22
182-0862-22 057-0463-12 M22520/2-01 057-0467-32
057-0515-32
M22520/2-09
M22520/2-06 M81969/14-01
724-0001-20
724-0003-20 057-0461-11 M22520/1-01 057-0466-21 M22520/1-04 M81969/14-10
724-1063-20
724-1064-20 057-0461-11 M22520/1-01 056-0466-21 M22520/1-04 M81969/14-10
724-0001-16
724-0003-16 057-0461-11 M22520/1-01 057-0466-21 M22520/1-04 M81969/14-03
724-1063-16
724-1064-16 057-0461-11 M22520/1-01 056-0466-21 M22520/1-04 M81969/14-03
724-0001-12
724-0003-12 057-0461-11 M22520/1-01 057-0466-21 M22520/1-04 M81969/14-04
724-1063-12
724-1064-12 057-0461-11 M22520/1-01 056-0466-21 M25520/1-04
724-0001-08
724-0003-08 057-0064-05 A N/A 057-0065-05 A N/A 114-008 or
M81969/14-06
182-0001-08
182-0003-08 057-0064-05 A N/A 057-0065-05 A N/A 114-008 or
M81969/14-06
724-0004-16
724-0005-16
057-0463-12
(Center Contact)
057-0509-14
(Outer Contact)
N/A
057-0539-32
(Center Contact)
057-0511-34
(Outer Contact)
N/A M15570-16
182-0125-08
182-0126-08 N/A N/A N/A N/A 114-008 or
M81969/14-06
182-0048-08
182-0044-08 N/A N/A N/A N/A 114-008 or
M81969/14-06
724-1272-22 057-0463-12 M22520/2-01 057-0515-32 M22520/2-06 M81969/14-01
Tooling for Databus Contacts
Cable Type Sleeve Type Center Conductor Ferrule Insertion/Extraction Tool
Single Braid Thermoplastic and
Silicone TDB-CY-08 TDB-CT-HEX Mark C
114-008 or
M81969/14-06
Double Braid Thermoplastic and
Silicone TDB-CT-08 TDB-CT-08HEX Mark D
CONTACTS
Bold part numbers are standard contacts delivered with modules.
PAGE 38
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
MC6 Termini
MC5 Termini
ARINC 801 Termini for T47 Modules
MC6 12 SM 01 P
FAMILY
MC6
NUMBER OF FIBERS
12
FIBER TYPE
SM Single Mode
MM Multimode
CABLE TYPE
01 Ruggedized Oval Aerospace Multiber Cable, 3.95 mm x 1.60 mm max. Jacket
02 Round Multiber Cable, Ø 3.96 mm max. Jacket
FERRULE TYPE
P Male, with Alignment Pins
S Female, without Alignment Pins
455335 126 01
FAMILY
455335 MC5
OPTICAL HOLE DIAMETER
126 126 μm
127 127 μm
CABLE TYPE
00 900 μm buered ber
01 2.1 mm cable OD
02 1.8 mm cable OD
03 2.5 mm cable OD
04 2.4 mm cable OD
05 1.2 mm cable OD
459265 126 02
FAMILY
459265 ARINC 801
OPTICAL HOLE DIAMETER
126 126 μm
CABLE TYPE
00 900 μm buered ber
02 1.8 mm cable OD
FIBER OPTIC TERMINI
PAGE 39
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
FIBER OPTIC TOOL KITS
We offer tool kits to meet a range of needs, including emergency
field terminations, workshop termination, fusion splicing, and testing
and inspection. Kit can cover a generic range of connectors or
can be tailored to specific products.
FIBER OPTIC TRAINING
Our training equips technicians with best practices for handling
fiber and termination it in a range of TE connectors. Contact TE for
further details.
FIBER OPTIC TOOL KITS AND TRAINING
PAGE 40
DEUTSCH DMC-M Series Multicavity EN4165 ConnectorsDEUTSCH DMC-M Series Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
Ø 3.2 ±0.05
[0.126 ±0.002]
54 ±0.1
[2.126 ±0.02]
46.2 ±0.1
[1.819 ±0.004]
7.8
[0.307]
MAX.
38.4
[1.512]
MAX.
33.4
[1.315]
MAX.
54.9
[2.161]
MAX.
16.7 ±0.1
[0.657 ±0.004]
11. 0 ±0.05
[0.433 ±0.002]
76.7 ±0.1
[3.02 ±0.004]
84.5 ±0.1
[3.327 ±0.004]
2 times
Ø 2 .15 ±0.05
[0.085 ±0.002]
4 times
15.4 ±0.1
[0.606 ±0.004]
80.5 ±0.5
[3.169 ±0.02]
75.3 ±0.1
[2.965 ±0.004]
50 ±0.5
[1.969 ±0.02]
44.8 ±0.1
[1.764 ±0.004]
M3 or 2 times
Unmated
Position
Mated
Position
Coupling torque 0.1 daN.m max.
38.4
[1.512]
MAX.
7.8
[0.307]
MAX.
33.4
[1.315]
MAX.
54.9
[2.161]
MAX.
Panel Cutouts for Rack and Panel Plugs
Panel Cutouts for Receptacles
TYPES 88, 89
TYPES 82, 83, 84, 85
TYPES 48, 49
TYPES 42, 43, 44, 45
Coupling torque for panel screw: 0.2 daN.m (17.7 in. lbf) max.
Maximum Misalignment between Plug and Receptacle
OZ: ±2 mm (±0.79 in.) OY: ±0.75 mm (±0.030 in.) OX: ±0.75 mm (±0.030 in.) ø: ±1°
PANEL CUTOUTS
PAGE 41
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
CONNECTOR TOOLING
Mounting and dismounting of
receptacle keying component.
057-0590-80 / EN4165TC
Mounting of plug keying component
Manual insertion and extraction
Insertion tool (only for sealed module)
Long version
057-0699-00 A / EN4165TS
Short version
057-0699-00 B / EN4165TS
Extraction tool
Long version
057-0289-00 A / EN4165TN
Short version
057-0289-00 B / EN4165TN
Standard allen keys
Contact tools
Size 22: M81969/14-01
Size 20: M81969/14-10
Size 16: M81969/14-03
Size 12: M81969/14-04
Size 08: M81969/14-06
* Delivered with contacts
PAGE 42
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Contact Crimping
Use a crimping tool with the appropriate
pilot stop.
Insert the contact into the crimping tool.
Tighten the crimping tool fully. The handles will
not release until the tool is fully bottomed.
Strip the insulation from the copper wire, with
5 mm maximum strip length. (For aluminum wire,
consult TE.)
Insert the wire into the contact.
Remove and inspect the completed termination.
The contact must have 8 markings, and the wire
must be seen in the contact side hole.
For the use of a shielded version, do not forget to slide the cables in the chimney before crimping the contacts.
USER MANUAL
PAGE 43
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Contact Insertion and Withdrawal
Use the appropriate plastic tool. There is one tool
for each contact size.
Insert the wire into the slot of the colored end of
tool. Pull the wire until the contact butts against
the tool.
For extraction, insert the wire in the slot of
the white end of the tool. Slide the tool into
the cavity and push it in until butts against the
contact shoulder.
Insert the contact in the module cavity. Push the
contact fully home. Then remove the tool and
lightly pull back on the wire to make sure that the
contact is fully seated.
Press the wire between the fingers and the tool.
Then pull the overall wire and tool back.
CONTACT INSERTION
CONTACT WITHDRAWAL
Part Number Contact Size
M81969/14-01 22
M81969/14-10 20
M81969/14-03 16
M81969/14-04 12
114-008 or M81969/14-06 08
USER MANUAL
PAGE 44
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Module Insertion and Extraction
The module must be inserted from the rear side of
the housing. The module polarization key must be
visible from the marked side of the housing.
For extraction use the tool part number
057-0289-00 A or B.
Note the tool’s different orientation depending on
the A, B, C or D cavities.
Manually push the module into the cavity until the
module’s rear should butt against the shell.
For sealed modules, use the insertion tool part
number 057-0699-00 A or B.
Check that the module is properly seated either by
pulling back the wires or by pushing the module
from the front of the housing.
Slide the tool around the cable. Then push the
tool inside the cavity until the tool butts against
the shell.
Press the cable between the tool and the fingers
and pull back. If the module is not wired, use the
same tool, but push the module from the front of
the housing.
MODULE INSERTION
MODULE EXTRACTION
USER MANUAL
PAGE 45
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Mounting the Receptacle Keying Component
Mounting the Plug Keying Component
For mounting and dismounting, use the tool
057-0590-80.
The receptacle keying component must be inserted
from the rear side of the receptacle housing. The
component can be rotated in 60° increments.
Orientation is indicated by the largest keyway.
Use the plug keying component corresponding
to the receptacle keying component (same
color code).
Tighten the nut with the tool, by applying a
0.15 ±0.02 daN.m (13.3 ±6.1 in. lbf.) coupling torque.
Insert the nut from the front of the
receptacle housing.
Insert the plug keying component in the front side
of the plug housing. Make sure that it has the same
orientation as the receptacle key. Then seat the
plug keying component manually by pushing it
fully into the cavity.
USER MANUAL
PAGE 46
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
DEUTSCH DMC-M Series Connectors
Free Plug/Receptacle Coupling
Mounting Shielded Braid on Chimney
Use the tool 05 7-0450-00 to tighten the ring
around the shielded braid over the chimney.
Use the tool part number 057-0592-80 or a
standard allen key and apply a 0.1 ±0.03 daN.m
(8.8 ±2.6 in. lbf.) coupling torque.
Slide the chimney and the shielded braid around
the cable.
Insert the module in the housing.
Slide the shielded braid and the 3 mm band strap
ring over the chimney.
USER MANUAL
PAGE 47
DEUTSCH DMC-M Series Multicavity EN4165 Connectors
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
Shielded Accessories Assembly
Fit the accessory cover, and tighten the overall screws by applying a 0.05 +0.02 daN.m (4.4 +1.7 in. lbf.)
coupling torque with a standard allen key.
Choose the appropriate plug or receptacle
accessory. Insert the accessory in the housing.
Make sure that the marking of the accessory is in
front of the respective housing’s cavities.
Insert the chimneys in their cavities.
USER MANUAL
te.com/dmc-m
AMP, AGASTAT, CII, DEUTSCH, HARTMAN, KILOVAC, LL ROWE, MICRODOT, NANONICS, POLAMCO,
Raychem, SEACON, TE, TE Connectivity and the TE connectivity (logo) are trademarks of the TE Connectivity
Ltd. family of companies. Other products, logos, and company names mentioned herein may be trademarks of
their respective owners.
While TE Connectivity (TE) has made every reasonable eort to ensure the accuracy of the information herein,
nothing herein constitutes any guarantee that such information is error-free, or any other representation,
warranty or guarantee that the information is accurate, correct, reliable or current. The TE entity issuing this
publication reserves the right to make any adjustments to the information contained herein at any time without
notice. All implied warranties regarding the information contained herein, including, but not limited to, any
implied warranties of merchantability or tness for a particular purpose are expressly disclaimed. The dimensions
herein are for reference purposes only and are subject to change without notice. Specications are subject to
change without notice.
Consult TE for the latest dimensions and design specications.
© 2017 TE Connectivity Ltd. family of companies All Rights Reserved.
1-1773886-6  02/17   
AEROSPACE, DEFENSE & MARINE /// DEUTSCH DMC-M SERIES MULTICAVITY EN4165 CONNECTORS
LET’S CONNECT
We make it easy to connect with our experts and are ready to
provide all the support you need. Just call your local support number or visit
www.te.com/industrial to chat with a Product Information Specialist.
Technical Support
te.com/support-center
North America +1 800 522 6752
North America (Toll) +1 717 986 7777
EMEA/South Africa +800 0440 5100
EMEA (Toll) +31 73 624 6999
India (Toll-Free) +800 440 5100
Asia Pacic +86 400 820 6015
Japan +81 044 844 8180
Australia +61 2 9554 2695
New Zealand +64 (0) 9 634 4580
The Rugged, Modular Solution for Flexible, Reliable
Aerospace Connectivity