Order this document by 2N3055/D SEMICONDUCTOR TECHNICAL DATA . . . designed for general-purpose switching and amplifier applications. *Motorola Preferred Device * DC Current Gain -- hFE = 20 - 70 @ IC = 4 Adc * Collector-Emitter Saturation Voltage -- VCE(sat) = 1.1 Vdc (Max) @ IC = 4 Adc * Excellent Safe Operating Area 15 AMPERE POWER TRANSISTORS COMPLEMENTARY SILICON 60 VOLTS 115 WATTS IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III IIIIIIIIIIIII IIIII IIIII III MAXIMUM RATINGS Rating Symbol Value Unit Collector-Emitter Voltage VCEO 60 Vdc Collector-Emitter Voltage VCER 70 Vdc Collector-Base Voltage VCB 100 Vdc Emitter-Base Voltage VEB 7 Vdc Collector Current -- Continuous IC 15 Adc Base Current IB 7 Adc Total Power Dissipation @ TC = 25_C Derate above 25_C PD 115 0.657 Watts W/_C TJ, Tstg - 65 to + 200 _C Symbol Max Unit RJC 1.52 _C/W Operating and Storage Junction Temperature Range CASE 1-07 TO-204AA (TO-3) THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case PD, POWER DISSIPATION (WATTS) 160 140 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) 175 200 Figure 1. Power Derating Preferred devices are Motorola recommended choices for future use and best overall value. Motorola, Inc. 1995 Motorola Bipolar Power Transistor Device Data 1 IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III v v ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted) Characteristic Symbol Min Max Unit Collector-Emitter Sustaining Voltage (1) (IC = 200 mAdc, IB = 0) VCEO(sus) 60 -- Vdc Collector-Emitter Sustaining Voltage (1) (IC = 200 mAdc, RBE = 100 Ohms) VCER(sus) 70 -- Vdc Collector Cutoff Current (VCE = 30 Vdc, IB = 0) ICEO -- 0.7 mAdc Collector Cutoff Current (VCE = 100 Vdc, VBE(off) = 1.5 Vdc) (VCE = 100 Vdc, VBE(off) = 1.5 Vdc, TC = 150_C) ICEX -- -- 1.0 5.0 Emitter Cutoff Current (VBE = 7.0 Vdc, IC = 0) IEBO -- 5.0 20 5.0 70 -- -- 1.1 3.0 *OFF CHARACTERISTICS mAdc mAdc *ON CHARACTERISTICS (1) DC Current Gain (IC = 4.0 Adc, VCE = 4.0 Vdc) (IC = 10 Adc, VCE = 4.0 Vdc) hFE -- Collector-Emitter Saturation Voltage (IC = 4.0 Adc, IB = 400 mAdc) (IC = 10 Adc, IB = 3.3 Adc) VCE(sat) Vdc Base-Emitter On Voltage (IC = 4.0 Adc, VCE = 4.0 Vdc) VBE(on) -- 1.5 Vdc Is/b 2.87 -- Adc Current Gain -- Bandwidth Product (IC = 0.5 Adc, VCE = 10 Vdc, f = 1.0 MHz) fT 2.5 -- MHz *Small-Signal Current Gain (IC = 1.0 Adc, VCE = 4.0 Vdc, f = 1.0 kHz) hfe 15 120 -- *Small-Signal Current Gain Cutoff Frequency (VCE = 4.0 Vdc, IC = 1.0 Adc, f = 1.0 kHz) fhfe 10 -- kHz SECOND BREAKDOWN Second Breakdown Collector Current with Base Forward Biased (VCE = 40 Vdc, t = 1.0 s, Nonrepetitive) DYNAMIC CHARACTERISTICS * Indicates Within JEDEC Registration. (2N3055) (1) Pulse Test: Pulse Width 300 s, Duty Cycle 2.0%. 2N3055, MJ2955 20 IC, COLLECTOR CURRENT (AMP) 50 s 10 dc 1 ms 6 4 500 s 2 250 s 1 0.6 0.4 0.2 BONDING WIRE LIMIT THERMALLY LIMITED @ TC = 25C (SINGLE PULSE) SECOND BREAKDOWN LIMIT 6 10 20 40 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC - VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 2 is based on TC = 25_C; TJ(pk) is variable depending on power level. Second breakdown pulse limits are valid for duty cycles to 10% but must be derated for temperature according to Figure 1. 60 Figure 2. Active Region Safe Operating Area 2 Motorola Bipolar Power Transistor Device Data NPN 2N3055 PNP MJ2955 500 200 300 VCE = 4.0 V TJ = 150C VCE = 4.0 V hFE , DC CURRENT GAIN hFE , DC CURRENT GAIN 200 25C 100 - 55C 70 50 30 20 10 7.0 5.0 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (AMP) 5.0 7.0 25C 100 70 - 55C 50 30 20 10 10 TJ = 150C 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (AMP) 5.0 7.0 10 VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 3. DC Current Gain 2.0 TJ = 25C 1.6 IC = 1.0 A 4.0 A 8.0 A 1.2 0.8 0.4 0 5.0 10 20 50 100 200 500 IB, BASE CURRENT (mA) 1000 2000 5000 2.0 TJ = 25C 1.6 IC = 1.0 A 4.0 A 8.0 A 1.2 0.8 0.4 0 5.0 10 20 50 100 200 500 IB, BASE CURRENT (mA) 1000 2000 5000 Figure 4. Collector Saturation Region 1.4 2.0 TJ = 25C 1.2 TJ = 25C 0.8 V, VOLTAGE (VOLTS) V, VOLTAGE (VOLTS) 1.6 1.0 VBE(sat) @ IC/IB = 10 0.6 VBE @ VCE = 4.0 V 0.4 1.2 VBE(sat) @ IC/IB = 10 VBE @ VCE = 4.0 V 0.8 0.4 0.2 0 VCE(sat) @ IC/IB = 10 VCE(sat) @ IC/IB = 10 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 0 0.1 IC, COLLECTOR CURRENT (AMPERES) 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10 IC, COLLECTOR CURRENT (AMP) Figure 5. "On" Voltages Motorola Bipolar Power Transistor Device Data 3 PACKAGE DIMENSIONS A N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH REFERENCED TO-204AA OUTLINE SHALL APPLY. C -T- E D K 2 PL 0.13 (0.005) U T Q M M Y M -Y- L V SEATING PLANE 2 H G B M T Y 1 -Q- 0.13 (0.005) M DIM A B C D E G H K L N Q U V INCHES MIN MAX 1.550 REF --- 1.050 0.250 0.335 0.038 0.043 0.055 0.070 0.430 BSC 0.215 BSC 0.440 0.480 0.665 BSC --- 0.830 0.151 0.165 1.187 BSC 0.131 0.188 MILLIMETERS MIN MAX 39.37 REF --- 26.67 6.35 8.51 0.97 1.09 1.40 1.77 10.92 BSC 5.46 BSC 11.18 12.19 16.89 BSC --- 21.08 3.84 4.19 30.15 BSC 3.33 4.77 STYLE 1: PIN 1. BASE 2. EMITTER CASE: COLLECTOR CASE 1-07 TO-204AA (TO-3) ISSUE Z Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 4 Motorola Bipolar Power Transistor Device Data *2N3055/D* 2N3055/D