FDS8984_F085 N-Channel PowerTrench(R) MOSFET tm 30V, 7A, 23m General Description Features This N-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either synchronous or conventional switching PWM controllers. It has been optimized for low gate charge, low rDS(ON) and fast switching speed. Max rDS(on) = 23m, VGS = 10V, ID = 7A Max rDS(on) = 30m, VGS = 4.5V, ID = 6A Low gate charge 100% RG tested Qualified to AEC Q101 RoHS Compliant DD2 DD2 D1 D 5 DD1 SO-8 Pin 1 SO-8 4 Q2 6 G2 S2 G G1 S S1 S 3 2 7 Q1 8 S 1 MOSFET Maximum Ratings TA = 25C unless otherwise noted Symbol VDS Drain to Source Voltage Parameter VGS Gate to Source Voltage Drain Current Continuous ID Ratings 30 Units V 20 V 7 A (Note 1a) Pulsed EAS PD TJ, TSTG Single Pulse Avalache Energy (Note 2) 30 A 32 mJ Power Dissipation for Single Operation 1.6 W Derate above 25C 13 mW/C -55 to 150 C (Note 1a) 78 C/W (Note 1) 40 C/W Operating and Storage Temperature Thermal Characteristics RJA Thermal Resistance, Junction-to-Ambient RJC Thermal Resistance, Junction-to-Case Package Marking and Ordering Information Device Marking FDS8984 Device FDS8984_F085 (c)2010 Fairchild Semiconductor Corporation FDS8984_F085 Rev. A Package SO-8 Reel Size 330mm 1 Tape Width 12mm Quantity 2500 units www.fairchildsemi.com FDS8984_F085 N-Channel PowerTrench(R) MOSFET Fabruary 2010 Symbol Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain to Source Breakdown Voltage ID = 250A, VGS = 0V BVDSS TJ Breakdown Voltage Temperature Coefficient ID = 250A, referenced to 25C IDSS Zero Gate Voltage Drain Current VDS = 24V VGS = 0V IGSS Gate to Source Leakage Current VGS = 20V,VDS = 0V 30 V 23 mV/C 1 TJ = 125C 250 A 100 nA 2.5 V On Characteristics (Note 3) VGS(th) Gate to Source Threshold Voltage VDS = VGS, ID = 250A VGS(th) TJ Gate to Source Threshold Voltage Temperature Coefficient ID = 250A, referenced to 25C VGS = 10V, ID = 7A 19 23 Drain to Source On Resistance VGS = 4.5V, ID = 6A 24 30 VGS = 10V, ID = 7A, TJ = 125C 26 32 rDS(on) 1.2 1.7 - 4.3 mV/C m Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance RG Gate Resistance VDS = 15V, VGS = 0V, f = 1.0MHz 475 635 pF 100 135 pF 65 100 pF f = 1MHz 0.9 1.6 5 10 ns 9 18 ns 42 68 ns 21 34 ns 9.2 13 nC 5.0 7 nC Switching Characteristics (Note 3) td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time Qg Total Gate Charge Qg Total Gate Charge Qgs Gate to Source Gate Charge Qgd Gate to Drain "Miller" Charge VDD = 15V, ID = 7A VGS = 10V, RGS = 33 VDS = 15V, VGS = 10V, ID = 7A VDS = 15V, VGS = 5V, ID = 7A 1.5 nC 2.0 nC Drain-Source Diode Characteristics VSD Source to Drain Diode Voltage trr Diode Reverse Recovery Time Qrr Diode Reverse Recovery Charge ISD = 7A 0.9 1.25 V ISD = 2.1A 0.8 1.0 V IF = 7A, di/dt = 100A/s 33 ns 20 nC Notes: 1: RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RCA is determined by the user's board design. a) 78C/W when mounted on a 0.5in2 pad of 2 oz copper b) 125C/W when mounted on a 0.02 in2 pad of oz copper c) 135C/W when mounted on a minimun pad Scale 1 : 1 on letter size paper 2: Starting TJ = 25C, L = 1mH, IAS = 8A, VDD = 27V, VGS = 10V. 3: Pulse Test:Pulse Width <300s, Duty Cycle <2%. FDS8984_F085 Rev. A 2 www.fairchildsemi.com FDS8984_F085 N-Channel PowerTrench(R) MOSFET Electrical Characteristics TJ = 25C unless otherwise noted RDS(ON), NORMALIZED ID, DRAIN CURRENT (A) VGS=10V PULSE DURATION =80S DUTY CYCLE =0.5% MAX VGS=5.0V VGS=3.5V 20 VGS=4.5V VGS=4.0V 10 VGS=3.0V 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Figure 1. On Region Characteristics RDS(on), DRAIN TO SOURCE ON-RESISTANCE (mOHM) NORMALIZED DRAIN TO SOURCE ON-RESISTANCE ID = 7A VGS = 10V 1.2 1.0 0.8 -40 0 40 80 120 PULSE DURATION =80S DUTY CYCLE =0.5% MAX 2.5 VGS=3.0V 2.0 VGS=3.5V VGS=4.0V 1.5 1.0 VGS=5.0V 0.5 5 160 Figure 3. On Resistance vs Temperature IS, REVERSE DRAIN CURRENT (A) ID, DRAIN CURRENT (A) O TJ = 150 C 15 O TJ = 25 C 10 5 0 O TJ = - 55 C 1 2 3 VGS, GATE TO SOURCE VOLTAGE (V) 4 25 30 50 45 40 TJ = 125oC 35 30 25 20 15 TJ = 25oC 2 4 6 8 VGS, GATE TO SOURCE VOLTAGE (V) 10 10 1 VGS = 0V TJ = 150oC TJ = 25oC 0.1 TJ = -55oC 0.01 1E-3 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics FDS8984_F085 Rev. A 20 PULSE DURATION = 80s DUTY CYCLE = 0.5%MAX ID = 7A 55 30 VDD = 5V 20 15 Figure 4. On-Resistance vs Gate to Source Votlage PULSE DURATION =80S DUTY CYCLE =0.5% MAX 25 10 VGS=10V 60 TJ, JUNCTION TEMPERATURE (oC) 30 VGS=4.5V Figure 2. On-Resistance vs Drain Current and Gate Voltage 1.6 0.6 -80 3.0 ID, DRAIN CURRENT (A) VDS, DRAIN-SOURCE VOLTAGE (V) 1.4 DRAIN-SOURCE ON-RESISTANCE 30 = 25C unless otherwise noted Figure 6. Source to Drain Diode Forward Voltage vs Source Current 3 www.fairchildsemi.com FDS8984_F085 N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ = 25C unless otherwise noted 700 VGS, GATE TO SOURCE VOLTAGE(V) 10 600 CISS VDD = 15V VDD = 10V 6 4 CAPACITANCE (pF) 8 VDD = 20V 2 500 f = 1MHz VGS = 0V 400 COSS 300 200 100 0 0 2 4 6 Qg, GATE CHARGE(nC) 8 10 CRSS 0.1 Figure 7. Gate Charge Characteristics 10 30 Figure 8. Capacitance vs Drain to Source Voltage 8 ID, DRAIN CURRENT (A) IAS, AVALANCHE CURRENT (A) 20 10 O STARTING TJ = 25 C O STARTING TJ = 125 C 1 0.01 0.1 7 6 VGS=10V 5 4 VGS=4.5V 3 2 1 1 10 0 25 20 P(PK), PEAK TRANSIENT POWER (W) 10us 0.1 0.01 0.1 100us 1ms OPERATION IN THIS AREA MAY BE LIMITED BY rDS(on) 10ms 100ms 1s SINGLE PULSE TJ = MAX RATED TA = 25oC DC 1 10 VDS, DRAIN TO SOURCE VOLTAGE (V) 100 Figure 11. Forward Bias Safe Operating Area FDS8984_F085 Rev. A 100 125 150 Figure 10. Maximum Continuous Drain Current vs Ambient Temperature 100 1 75 TA, AMBIENT TEMPERATURE ( C) Figure 9. Unclamped Inductive Switching Capability 10 50 o tAV, TIME IN AVALANCHE (mS) ID, DRAIN CURRENT (A) 1 VDS, DRAIN TO SOURCE VOLTAGE (V) 3000 TA = 25oC 1000 FOR TEMPERATURES ABOVE 25oC DERATE PEAK CURRENT AS FOLLOWS: 100 150 - T A -----------------------125 I = I25 VGS=10V 10 SINGLE PULSE 1 -5 10 -4 10 -3 10 -2 -1 0 1 10 10 10 10 t, PULSE WIDTH (s) 2 10 3 10 Figure 12. Single Pulse Maximum Power Dissipation 4 www.fairchildsemi.com FDS8984_F085 N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ Normalized Thermal Impedance ZJA 2 1 0.1 = 25C unless otherwise noted DUTY CYCLE - DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM 0.01 t1 1E-3 1E-4 -5 10 t2 SINGLE PULSE -4 10 -3 10 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJA x RJA + TA -2 -1 10 10 0 10 1 10 2 10 3 10 t, RECTANGULAR PULSE DURATION(s) Figure 13. Transient Thermal Response Curve FDS8984_F085 Rev. A 5 www.fairchildsemi.com FDS8984_F085 N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ tm tm tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handing and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I47 FDS8984_F085 Rev. A 6 www.fairchildsemi.com FDS8984_F085 N-Channel PowerTrench(R) MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPowerTM FRFET(R) PowerTrench(R) The Power Franchise(R) (R) Auto-SPMTM Global Power ResourceSM PowerXSTM Programmable Active DroopTM Green FPSTM Build it NowTM QFET(R) Green FPSTM e-SeriesTM CorePLUSTM TinyBoostTM QSTM GmaxTM CorePOWERTM TinyBuckTM Quiet SeriesTM GTOTM CROSSVOLTTM TinyCalcTM RapidConfigureTM IntelliMAXTM CTLTM TinyLogic(R) ISOPLANARTM Current Transfer LogicTM TM TINYOPTOTM (R) MegaBuckTM DEUXPEED TinyPowerTM Dual CoolTM Saving our world, 1mW/W/kW at a timeTM MICROCOUPLERTM TinyPWMTM EcoSPARK(R) SignalWiseTM MicroFETTM TinyWireTM EfficentMaxTM SmartMaxTM MicroPakTM TriFault DetectTM SMART STARTTM MicroPak2TM (R) TRUECURRENTTM* SPM(R) MillerDriveTM SerDesTM STEALTHTM MotionMaxTM Fairchild(R) SuperFETTM Motion-SPMTM Fairchild Semiconductor(R) SuperSOTTM-3 OptiHiTTM FACT Quiet SeriesTM UHC(R) SuperSOTTM-6 OPTOLOGIC(R) FACT(R) (R) Ultra FRFETTM (R) OPTOPLANAR SuperSOTTM-8 FAST (R) UniFETTM SupreMOSTM FastvCoreTM VCXTM SyncFETTM FETBenchTM VisualMaxTM Sync-LockTM FlashWriter(R) * PDP SPMTM XSTM (R)* FPSTM Power-SPMTM F-PFSTM