HFA320NJ40CPbF Vishay High Power Products HEXFRED(R) Ultrafast Soft Recovery Diode, 320 A FEATURES Lug terminal anode 1 Lug terminal anode 2 * Very low Qrr and trr * Lead (Pb)-free * Designed and qualified for industrial level RoHS COMPLIANT BENEFITS * Reduced RFI and EMI * Reduced snubbing Base common cathode TO-244 PRODUCT SUMMARY IF(AV) 320 A VR 400 V IF(DC) at TC 255 A at 85 C DESCRIPTION HEXFRED(R) diodes are optimized to reduce losses and EMI/RFI in high frequency power conditioning systems. An extensive characterization of the recovery behavior for different values of current, temperature and dI/dt simplifies the calculations of losses in the operating conditions. The softness of the recovery eliminates the need for a snubber in most applications. These devices are ideally suited for power converters, motors drives and other applications where switching losses are significant portion of the total losses. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Cathode to anode voltage VR Continuous forward current IF TEST CONDITIONS MAX. UNITS 400 V TC = 25 C 420 TC = 85 C 255 TC = 115 C 160 1200 Single pulse forward current IFSM Limited by junction temperature Non-repetitive avalanche energy EAS L = 100 H, duty cycle limited by maximum TJ 1.4 TC = 25 C 625 TC = 100 C 250 Maximum power dissipation Operating junction and storage temperature range PD TJ, TStg A mJ W - 55 to 150 C ELECTRICAL SPECIFICATIONS (TJ = 25 C unless otherwise specified) PARAMETER Cathode to anode breakdown voltage SYMBOL VBR TEST CONDITIONS IR = 100 A IF = 160 A Maximum forward voltage VFM IF = 320 A See fig. 1 IF = 160 A, TJ = 125 C Maximum reverse leakage current IRM TJ = 125 C, VR = 400 V See fig. 2 Junction capacitance CT VR = 200 V See fig. 3 Series inductance LS From top of terminal hole to mounting plane Document Number: 94072 Revision: 01-Aug-08 For technical questions, contact: ind-modules@vishay.com MIN. TYP. MAX. UNITS 400 - - - 1.10 1.35 - 1.30 1.54 - 1.00 1.20 - 0.9 3 - 370 500 pF - 5.0 - nH V mA www.vishay.com 1 HFA320NJ40CPbF HEXFRED(R) Ultrafast Soft Recovery Diode, 320 A Vishay High Power Products DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time See fig. 5 trr Peak recovery current See fig. 6 IRRM Reverse recovery charge See fig. 7 Peak rate of recovery current See fig. 8 Qrr dI(rec)M/dt TEST CONDITIONS MIN. TYP. MAX. IF = 1.0 A, dIF/dt = 200 A/s, VR = 30 V - 45 - TJ = 25 C - 90 140 TJ = 125 C - 290 440 TJ = 25 C - 8.7 20 - 18 30 - 420 1100 TJ = 125 C - 2600 7000 TJ = 25 C - 300 - TJ = 125 C - 280 - IF = 160 A dIF/dt = 200 A/s VR = 200 V TJ = 125 C TJ = 25 C UNITS ns A nC A/s THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range per leg Thermal resistance, junction to case per module Typical thermal resistance, case to heatsink Terminal torque MIN. TYP. MAX. UNITS TJ, TStg - 55 - 150 C RthJC RthCS Weight Mounting torque SYMBOL - - 0.19 - - 0.095 - 0.10 - - 68 - g - 2.4 - oz. (1) 30 (3.4) - 40 (4.6) center hole 12 (1.4) - 18 (2.1) 30 (3.4) - 40 (4.6) Vertical pull - - 80 2" lever pull - - 35 C/W K/W Nm (lbf in) lbf in Note (1) Mounting surface must be smooth, flat, free of burrs or other protrusions. Apply a thin even film or thermal grease to mounting surface. Gradually tighten each mounting bolt in 5 to 10 lbf in steps until desired or maximum torque limits are reached. www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 94072 Revision: 01-Aug-08 HFA320NJ40CPbF 140 100 TJ = 150 C TJ = 125 C TJ = 25 C 10 120 100 DC 80 60 40 20 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1.8 100 200 300 400 500 VFM - Forward Voltage Drop (V) IF(AV) - DC Forward Current (A) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current (Per Leg) Fig. 4 - Maximum Allowable Case Temperature vs. DC Forward Current (Per Leg) 400 10 000 TJ = 150 C TJ = 125 C TJ = 25 C 350 IF = 200 A IF = 160 A IF = 70 A 1000 300 TJ = 125 C 100 trr (ns) IR - Reverse Current (A) Vishay High Power Products 160 1000 Maximum Allowable Case Temperature (C) IF - Instantaneous Forward Current (A) HEXFRED(R) Ultrafast Soft Recovery Diode, 320 A 10 250 200 150 100 TJ = 25 C 1 50 0.1 100 200 300 0 100 400 VR - Reverse Voltage (V) dIF/dt (A/s) Fig. 2 - Typical Reverse Current vs. Reverse Voltage (Per Leg) Fig. 5 - Typical Reverse Recovery Time vs. dIF/dt (Per Leg) 80 10 000 70 TJ = 125 C TJ = 25 C 60 IRRM (A) CT - Junction Capacitance (pF) 1000 TJ = 25 C 1000 50 40 IF = 200 A IF = 160 A IF = 70 A 30 20 10 100 1 10 100 1000 0 100 1000 VR - Reverse Voltage (V) dIF/dt (A/s) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) Fig. 6 - Typical Recovery Current vs. dIF/dt (Per Leg) Document Number: 94072 Revision: 01-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 HFA320NJ40CPbF Vishay High Power Products HEXFRED(R) Ultrafast Soft Recovery Diode, 320 A 7000 Qrr (nC) 5000 4000 dI(rec)M/dt (A/s) 6000 10 000 TJ = 125 C TJ = 25 C IF = 200 A IF = 160 A IF = 70 A 3000 2000 200 A 160 A 70 A 1000 1000 TJ = 125 C TJ = 25 C 0 100 100 100 1000 1000 dIF/dt (A/s) dIF/dt (A/s) Fig. 7 - Typical Stored Charge vs. dIF/dt (Per Leg) Fig. 8 - Typical dI(rec)M/dt vs. dIF/dt (Per Leg) ZthJC - Thermal Response 1 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 0.01 Single pulse (thermal response) 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 9 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 94072 Revision: 01-Aug-08 HFA320NJ40CPbF HEXFRED(R) Ultrafast Soft Recovery Diode, 320 A Vishay High Power Products VR = 200 V 0.01 L = 70 H D.U.T. dIF/dt adjust D IRFP250 G S Fig. 10 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (4) Qrr - area under curve defined by trr and IRRM (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current Qrr = (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 11 - Reverse Recovery Waveform and Definitions L = 100 H High-speed switch D.U.T. Rg = 25 Current monitor IL(PK) Freewheel diode + Decay time Vd = 50 V V(AVAL) VR(RATED) Fig. 12 - Avalanche Test Circuit and Waveforms Document Number: 94072 Revision: 01-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 HFA320NJ40CPbF HEXFRED(R) Ultrafast Soft Recovery Diode, 320 A Vishay High Power Products ORDERING INFORMATION TABLE Device code HFA 320 NJ 40 C PbF 1 2 3 4 5 6 1 - HEXFRED(R) family, electron irradiated 2 - Average current rating 3 - NJ = TO-244 4 - Voltage rating (400 V) 5 - C = Common cathode 6 - Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com 6 http://www.vishay.com/doc?95021 For technical questions, contact: ind-modules@vishay.com Document Number: 94072 Revision: 01-Aug-08 Outline Dimensions Vishay Semiconductors TO-244 DIMENSIONS in millimeters (inches) 35 (1.37) REF. 13 (0.51) 7 (0.27) 6 (0.23) 17.5 (0.69) 16.5 (0.65) 80 (3.15) O 5.2 (O 0.20) 3 12.6 (0.5) O 7.2 (O 0.28) (2 places) 3 1 2 21 (0.82) 20 (0.78) 1/4" - 20 UNC 9.6 (0.37) MIN. 93 (3.66) MAX. Document Number: 95021 Revision: 25-Jun-07 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000