Autotransformer AIM 3,2/1,6 Advantages Low weight and small size (compared to isolating transformers) Integrated short circuit and overload protection Very high efficiency Very good moisture protection and low noise thanks to XtraDenseFill resin encapsulation (AIM 1.8/8 - AIM 5.0/2.5) Screw terminals under cover with strain relief Applications Autotransformer for adjustment of the voltage on the input and output sides with no requirement for electrical isolation. Standards >Z Autotransformer to: VDE 0570 Part 2-13, DIN EN 61558-2-13, EN 61558-2-13, IEC 61558-2-13 Approvals Z Autotransformer AIM 3,2/1,6 AIM 3,2/1,6 Rated input Voltage Rated frequency 115 Vac/220 Vac 230 Vac/240 Vac 50 - 60 Hz Output Rated output voltage Rated output current No-load loss (typ.) 115 Vac/220 Vac 230 Vac/240 Vac 1.60 (PRI 115 / SEC 220, 230, 240); 3.20 (PRI 115 / SEC 115); 3.20 (PRI 220, 230, 240 / SEC 115, 220, 230, 240) 6.70 W AIM 3,2/1,6 Terminal and mounting Screw-type terminal Fixing holes in the terminal connection compartment Terminals Fixing method Measures and weights 3.60 kg Weight 167.0 76.0 117.0 77.0 97.0 14.0 4.3 Environment Ambient temperature max. Type 97.0 223.0 40 C Safety and protection Type Class of Insulation System Protection index Safety class Short circuit strength Resin encapsulated transformer A IP 20 May be used in protection category I and II. When protection category I devices are equipped the protective conductor in the output must be connected with the lead-in protective conductor. non-inherently short-circuit proof Order numbers Order Number AIM 3,2/1,6 Subjects to change. + Input 30 Type