Product description:
• AEC-Q200 Grade 3 qualified
• Handles high transient inrush current spikes
• Magnetically shielded
• Frequency range 20kHz to 10MHz
• Inductance range from 0.09µH to 22µH
• Current range from 1.1A to 32.0A
• 4.7 x 4.31 footprint surface mount package
in 1.2, 1.5, 1.85 or 2.0mm heights
• Rugged construction
• Halogen free, lead free, RoHS compliant
Applications:
Body electronics
- Central body control module
- Vehicle access control system
- Headlamps, tail lamps and interior lighting
- Door control
Advanced driver assistance systems
- 77GHz radar systems
- Automatic parking control
- Collision avoidance system
- Basic and smart surround, and rear and front
view camera
- Adaptive Cruise Control (ACC)
- Car black box system
Infotainment and cluster electronics
- Active noise cancellation (ANC)
- Audio subsystem: head unit and trunk amp
- Digital instrument cluster
- In-vehicle infotainment (IVI) and navigation
- Port power/USB hub for front and
rear passengers
Chassis and safety electronics
- Airbag control unit
Environmental data:
• Storage temperature range (component):
-55°C to +125°C
• Operating temperature range: -55°C to +125°C
(ambient plus self temperature rise)
• Solder reflow temperature: J-STD-020D
compliant
MPIA4040
Automotive Grade
High Current, High Frequency, Miniature Power Inductors
Technical Data 10230 Effective August 2014
HALOGEN
HF
FREE
Pb
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
www.eaton.com/elx2
Technical Data 10230
Effective August 2014
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
Product specications
1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10Vrms, 0.0Adc
2 Irms: DC current for an approximate temperature rise of 40°C without core
loss. De-rating is necessary for AC currents. Temperature rise is dependent
upon several factors, including the PCB pad layout, trace thickness and width,
air-ow and proximity to other heat generating components. It is
recommended the part temperature not exceed 125°C under worst case
operating conditions and therefore, the temperature rise should be veried
in the end use application. Irms testing was performed on a 19.05mm long x
6.35mm wide x 0.070mm thick copper trace in still air.
3 Isat: Peak current for approximately 30% rolloff at +25°C.
Part Number5
OCL1
± 20% (µH)
Part Marking
Designator
Irms
2
(Amps)
Isat
3
@ 25°C (Amps)
DCR (mΩ)
± 20% @ 20°C K-factor4
R1 -- 1.2mm Height
MPIA4040R1-R10-R 0.09 A 8.00 32.08.50 1401
MPIA4040R1-R15-R 0.15 B7.00 26.011.0 989
MPIA4040R1-R22-R 0.23 C 5.50 21.0 18.0 814
MPIA4040R1-R33-R 0.33 D 4.40 17.0 28.0 659
MPIA4040R1-R47-R 0.47 E 5.20 11.5 20.0 1295
MPIA4040R1-R68-R 0.68 F 3.30 9.00 51.0 461
MPIA4040R1-1R0-R 1.0 G 3.70 7.70 40.0 990
MPIA4040R1-1R5-R 1.5 H 3.00 6.50 60.0 732
MPIA4040R1-2R2-R 2.2 I 2.60 5.90 80.0 623
MPIA4040R1-3R3-R 3.3 J2.20 5.10 115 481
MPIA4040R1-4R7-R 4.7 K 1.80 3.80 180 411
MPIA4040R1-6R8-R†† 6.8 L1.50 3.20 250 344
MPIA4040R1-100-R†† 10.0 M 1.20 2.80 370 276
R2 -- 1.5mm Height
MPIA4040R2-R47-R 0.47 A 6.40 12.2 13.0 1403
MPIA4040R2-1R0-R 1.0 B4.60 8.90 25.0 935
MPIA4040R2-1R5-R 1.5 C 3.80 7.60 37.0 701
MPIA4040R2-2R2-R 2.2 D 3.20 5.70 58.0 647
MPIA4040R2-3R3-R 3.3 E 2.60 5.40 76.0 495
MPIA4040R2-4R7-R 4.7 F 2.20 4.30 105 421
MPIA4040R2-6R8-R 6.8 G 1.80 3.40 158 351
MPIA4040R2-100-R†† 10.0 H 1.50 3.10 240 271
4 K-factor: Used to determine Bp-p for core loss (see graph). Bp-p = K * L * DI.
Bp-p : (Gauss), K: (K-factor from table), L: (inductance in µH),
DI (peak-to-peak ripple current in amps).
5 Part Number Denition: MPIA4040RX-XXX-R
MPIA4040X = product code and size
XXX = inductance value in all, “R” = decimal point
- If no “R” is present, then third digit equals the number of zeros
“-R” sufx = RoHS compliant
Transient pulse not to exceed 1 millisecond.
†† Maximum operating frequency less than 10MHz, consult factory for
application specic values.
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
3
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
Technical Data 10230
Effective August 2014
Part Number5
OCL1
± 20% (µH)
Part Marking
Designator
Irms
2
(Amps)
Isat
3
@ 25°C (Amps)
DCR (mΩ)
± 20% @ 20°C K-factor4
R3 -- 1.85mm Height
MPIA4040R3-R22-R 0.22 A 8.00 20.0 5.8 1870
MPIA4040R3-R47-R 0.47 B5.80 17.0 10.3 1530
MPIA4040R3-1R2-R 1.2 C 4.00 9.40 32.0 732
MPIA4040R3-1R5-R 1.5 D 3.80 8.20 36.0 673
MPIA4040R3-2R2-R 2.2 E 3.40 7.90 48.0 543
MPIA4040R3-3R3-R 3.3 F 3.00 6.60 60.0 432
MPIA4040R3-4R7-R 4.7 G 2.30 4.80 92.0 374
MPIA4040R3-6R8-R 6.8 H 2.00 4.50 120 306
MPIA4040R3-100-R 10.0 I 1.50 3.80 213 251
MPIA4040R3-150-R 15.0 J1.30 3.00 285 213
MPIA4040R3-220-R†† 22.0 K 1.10 2.20 408 174
R4 -- 2.0mm Height
MPIA4040R4-R22-R 0.22 A 10.1 15.0 5.3 2405
MPIA4040R4-R33-R 0.33 B9.50 12.8 6.0 1870
MPIA4040R4-R47-R 0.45 C 8.10 11.5 8.2 1530
MPIA4040R4-1R0-R 1.0 D 5.70 8.20 17.0 990
MPIA4040R4-1R5-R 1.5 E 4.90 6.90 23.0 802
MPIA4040R4-2R2-R 2.2 F 3.90 5.70 35.0 673
MPIA4040R4-3R3-R†† 3.3 G 3.30 4.50 49.0 510
MPIA4040R4-4R7-R†† 4.7 H 2.90 3.90 67.0 455
MPIA4040R4-6R8-R†† 6.8 I 2.40 3.20 91.0 374
MPIA4040R4-100-R†† 10.0 J1.90 2.60 148 306
MPIA4040R4-220-R†† 22.0 K 1.30 1.80 316 203
1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10Vrms, 0.0Adc
2 Irms: DC current for an approximate temperature rise of 40°C without core
loss. De-rating is necessary for AC currents. Temperature rise is dependent
upon several factors, including the PCB pad layout, trace thickness and width,
air-ow and proximity to other heat generating components. It is
recommended the part temperature not exceed 125°C under worst case
operating conditions and therefore, the temperature rise should be veried
in the end use application. Irms testing was performed on a 19.05mm long x
6.35mm wide x 0.070mm thick copper trace in still air.
3 Isat: Peak current for approximately 30% rolloff at +25°C.
4 K-factor: Used to determine Bp-p for core loss (see graph). Bp-p = K * L * DI.
Bp-p : (Gauss), K: (K-factor from table), L: (inductance in µH),
DI (peak-to-peak ripple current in amps).
5 Part Number Denition: MPIA4040RX-XXX-R
MPIA4040X = product code and size
XXX = inductance value in all, “R” = decimal point
- If no “R” is present, then third digit equals the number of zeros
“-R” sufx = RoHS compliant
Transient pulse not to exceed 1 millisecond.
†† Maximum operating frequency less than 10MHz, consult factory for
application specic values.
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
www.eaton.com/elx4
Technical Data 10230
Effective August 2014
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
Temperature rise vs. total loss
Dimensions - mm
Packaging information - mm
MPIA4040R1-xxx-R
MPIA4040R2-xxx-R
MPIA4040R3-xxx-R
MPIA4040R4-xxx-R
Part Marking: L
xabcd
L = Automotive product
L
xabcd
User Direction of feed
12.0
±0.30
SECTION A-A
4.45
4.8
MPIA4040R1=1.30
MPIA4040R2=1.60
8.0
1.75
5.5
1.5 dia 1.5 dia. 4.0 2.0
L
xabcd
1
2
MPIA4040R3=1.95
MPIA4040R4=2.1
A
A
.
0
1 0
2 0
3 0
4 0
5 0
6 0
7 0
0 0 .1 0 .2 0 .3 0.4 0 .5 0.6 0 .7 0 .8 0 .9
Temperature Rise (°C)
Total Loss (W)
R 2
R 1 , R 4
R 3
Supplied in tape and reel packaging:
MPIA4040R1 = 5500 parts per 13” diameter reel
MPIA4040R2 = 4500 parts per 13” diameter reel
MPIA4040R3 = 3500 parts per 13” diameter reel
MPIA4040R4 = 3000 parts per 13” diameter reel
Do not route traces or vias underneath the inductor
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
5
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
Technical Data 10230
Effective August 2014
Core loss
1.85mm Height R3 2.0mm Height R4
1.5mm Height R2
1.2mm Height R1
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
www.eaton.com/elx6
Technical Data 10230
Effective August 2014
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
1.2mm Height R1 inductance characteristics — % of OCL vs. IDC
MPIA4040R1-R10-R
40
50
60
70
80
90
100
110
04812162024283236
% of OCL
MPIA4040R1-R15-R
40
50
60
70
80
90
100
110
0481216202
42
8
% of OCL
MPIA4040R1-R22-R
40
50
60
70
80
90
100
110
04812162024
% of OCL
MPIA4040R1-R33-R
40
50
60
70
80
90
100
110
02468101214161820
% of OCL
MPIA4040R1-R47-R
MPIA4040R1-R68-R
70
75
80
85
90
95
100
105
024681012
% of OCL
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
0
20
40
60
80
100
120
0 2 4 6 8 10 12 14
% OCL
MPIA4040R1-R10-R
40
50
60
70
80
90
100
110
04812162024283236
% of OCL
MPIA4040R1-R15-R
40
50
60
70
80
90
100
110
0481216202428
% of OCL
MPIA4040R1-R22-R
40
50
60
70
80
90
100
110
04812162024
% of OCL
MPIA4040R1-R33-R
40
50
60
70
80
90
100
110
02468101214161
82
0
% of OCL
MPIA4040R1-R47-R
MPIA4040R1-R68-R
70
75
80
85
90
95
100
105
024681012
% of OCL
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
0
20
40
60
80
100
120
0 2 4 6 8 10 12 14
% OCL
MPIA4040R1-R10-R
40
50
60
70
80
90
100
110
04812162024283236
% of OCL
MPIA4040R1-R15-R
40
50
60
70
80
90
100
110
0481216202428
% of OCL
MPIA4040R1-R22-R
40
50
60
70
80
90
100
110
04812162024
% of OCL
MPIA4040R1-R33-R
40
50
60
70
80
90
100
110
02468101214161820
% of OCL
MPIA4040R1-R47-R
MPIA4040R1-R68-R
70
75
80
85
90
95
100
105
024681
01
2
% of OCL
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
DC
I (Amps)
0
20
40
60
80
100
120
0 2 4 6 8 10 12 14
% OCL
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
7
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
Technical Data 10230
Effective August 2014
1.2mm Height R1 inductance characteristics — % of OCL vs. IDC
0
20
40
60
80
100
120
0 2 4 6 8 10 12
% OCL
IDC(Amps)
MPIA4040R1 -1R0-R
0
20
40
60
80
100
120
0 2 4 6 8 10
% OCL
IDC(Amps)
MPIA4040R1 -1R5-R
0
20
40
60
80
100
120
0 1 2 3 4 5 6 7 8
% OCL
IDC(Amps)
MPIA4040R1 -2R2-R
0
20
40
60
80
100
120
0 1 2 3 4 5 6 7 8
% OCL
IDC(Amps)
MPIA4040R1 -3R3-R
0
20
40
60
80
100
120
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
% OCL
IDC(Amps)
MPIA4040R1-4R7-R
0
20
40
60
80
100
120
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
% OCL
IDC(Amps)
MPIA4040R1 -6R8-R
0
20
40
60
80
100
120
0 0.5 1 1.5 2 2.5 3 3.5
% OCL
IDC(Amps)
MPIA4040R1 -100-R
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
www.eaton.com/elx8
Technical Data 10230
Effective August 2014
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
1.5mm Height R2 inductance characteristics — % of OCL vs. IDC
0
20
40
60
80
100
120
024681
01
2
% OCL
IDC(Amps)
MPIA4040R2-1R0-R
0
20
40
60
80
100
120
0123456789
% OCL
I
DC
(Amps)
MPIA4040R2-1R5-R
0
20
40
60
80
100
120
012345678
% OCL
I
DC
(Amps)
MPIA4040R2-2R2-R
0
20
40
60
80
100
120
012345678
% OCL
IDC(Amps)
MPIA4040R2-3R3-R
0
20
40
60
80
100
120
00.5 11.5 22.5 33.5 44.5
55.5
% OCL
I
DC
(Amps)
MPIA4040R2-4R7-R
0
20
40
60
80
100
120
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
% OCL
I
DC
(Amps)
MPIA4040R2-6R8-R
0
20
40
60
80
100
120
0246810121
41
6
% OCL
I
DC
(Amps)
MPIA4040R2-R47-R
0
20
40
60
80
100
120
0 0.5 1 1.5 2 2.5 3 3.5 4
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
9
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
Technical Data 10230
Effective August 2014
1.85mm Height R3 inductance characteristics — % of OCL vs. IDC
20.0%
30.0%
40.0%
50.0%
60.0%
70.0%
80.0%
90.0%
100.0%
110.0%
0.01.0 2.03.0 4.05.0 6.07.0 8.09.0 10.011.0
% of OCL
MPIA4040R3-1R2-R
Idc (Amps)
20.0%
30.0%
40.0%
50.0%
60.0%
70.0%
80.0%
90.0%
100.0%
110.0%
0.01.0 2.03.0 4.05.0 6.07.0 8.09.0 10.0 11.0
% of OCL
Idc (Amps)
MPIA4040R3-1R5-R
20.0%
30.0%
40.0%
50.0%
60.0%
70.0%
80.0%
90.0%
100.0%
110.0%
0.01.0 2.03.0 4.05.0 6.07.0 8.09.0 10.0
% of OCL
I
dc
(Amps)
MPIA4040R3-2R2-R
20%
30%
40%
50%
60%
70%
80%
90%
100%
110%
0.02.0 4.06.0 8.010.012.014.016.018.020.022.024.0
% of OCL
Idc (Amps)
MPIA4040R3-R22-R
20%
30%
40%
50%
60%
70%
80%
90%
100%
110%
0.02.0 4.06.0 8.010.012.014.016.018.020.0
% of OCL
Idc (Amps)
MPIA4040R3-R47-R
20%
30%
40%
50%
60%
70%
80%
90%
100%
110%
0.01.0 2.03.0 4.05.0 6.07.0 8.0
% of OCL
Idc (Amps)
MPIA4040R3-3R3-R
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
www.eaton.com/elx10
Technical Data 10230
Effective August 2014
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
1.85mm Height R3 inductance characteristics — % of OCL vs. IDC
20.0%
30.0%
40.0%
50.0%
60.0%
70.0%
80.0%
90.0%
100.0%
110.0%
0.01.0 2.03.0 4.05.0 6.07.0
% of OCL
Idc (Amps)
MPIA4040R3-4R7- R
20.0%
30.0%
40.0%
50.0%
60.0%
70.0%
80.0%
90.0%
100.0%
110.0%
0.00.5 1.01.5 2.02.5 3.03.5 4.04.5 5.05.5 6.0
% of OCL
Idc (Amps)
MPIA4040R3-6R8-R
20.0%
30.0%
40.0%
50.0%
60.0%
70.0%
80.0%
90.0%
100.0%
110.0%
0.00.5 1.01.5 2.02.5 3.03.5 4.04.5 5.0
% of OCL
Idc (Amps)
MPIA4040R3-100-R
20.0%
30.0%
40.0%
50.0%
60.0%
70.0%
80.0%
90.0%
100.0%
110.0%
0.00.5 1.01.5 2.02.5 3.03.5 4.0
% of OCL
Idc (Amps)
MPIA4040R3-150-R
20.0%
30.0%
40.0%
50.0%
60.0%
70.0%
80.0%
90.0%
100.0%
110.0%
0.00.5 1.01.5 2.02.5 3.03.5
% of OCL
Idc (Amps)
MPIA4040R3-220-R
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
11
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
Technical Data 10230
Effective August 2014
2.0mm Height R4 inductance characteristics — % of OCL vs. IDC
0
20
40
60
80
100
120
024681012141
61
8
% OCL
I
DC
(Amps)
MPIA4040R4-R22-R
0
20
40
60
80
100
120
02468101
21
4
% OCL
I
DC
(Amps)
MPIA4040R4-R33-R
0
20
40
60
80
100
120
02468101
21
4
% OCL
I
DC
(Amps)
MPIA4040R4-R47-R
0
20
40
60
80
100
120
024681
01
2
% OCL
I
DC
(Amps)
MPIA4040R4-1R0-R
0
20
40
60
80
100
120
012345678
% OCL
I
DC
(Amps)
MPIA4040R4-1R5-R
0
20
40
60
80
100
120
0
1234567
% OCL
I
DC
(Amps)
MPIA4040R4-2R2-R
0
20
40
60
80
100
120
0123456
% OCL
I
DC
(Amps)
MPIA4040R4-3R3-R
0
20
40
60
80
100
120
0123456
% OCL
IDC(Amps)
MPIA4040R4-4R7-R
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
www.eaton.com/elx12
2.0mm Height R4 inductance characteristics — % of OCL vs. IDC
Technical Data 10230
Effective August 2014
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
0
20
40
60
80
100
120
00.5 11.5 22.5 33.5
44
.5
% OCL
I
DC
(Amps)
MPIA4040R4-6R8-R
0
20
40
60
80
100
120
00.5 11.5 22.5
33
.5
% OCL
I
DC
(Amps)
MPIA4040R4-100-R
0
20
40
60
80
100
120
00.2 0.40.6 0.81 1.21.4 1.61.8
22.2
% OCL
I
DC
(Amps)
MPIA4040R4-220-R
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Eaton
Electronics Division
1000 Eaton Boulevard
Cleveland, OH 44122
United States
www.eaton.com/elx
© 2014 Eaton
All Rights Reserved
Publication No. 10230 — BU-SB14178
August 2014
MPIA4040 Automotive Grade High
Current, High Frequency Miniature
Power Inductors
Technical Data 10230
Effective August 2014
Temperature
t
tP
ts
TC -5°C
Time 25°C to Peak Time
25°C
Tsmin
Tsmax
TL
TP
Preheat
A
Max. Ramp Up Rate = C/s
Max. Ramp Down Rate = C/s
Table 1 - Standard SnPb Solder (Tc)
Volume Volume
Packagemm3mm3
Thickness <350 >
_350
<2.5mm 235°C 220°C
>
_2.5mm 220°C 220°C
Table 2 - Lead (Pb) Free Solder (Tc)
Volume Volume Volume
Packagemm3mm3mm3
Thickness <350 350 - 2000 >2000
<1.6mm 260°C 260°C 260°C
1.6 – 2.5mm 260°C 250°C 245°C
>2.5mm 250°C 245°C 245°C
Reference JDEC J-STD-020D
Profile Feature Standard SnPb Solder Lead (Pb) Free Solder
Preheat and Soak Temperature min.(Tsmin) 100°C 150°C
Temperature max. (Tsmax) 150°C 200°C
Time (Tsmin to Tsmax) (ts) 60-120 Seconds 60-120 Seconds
Average ramp up rate Tsmax to Tp3°C/ Second Max. 3°C/ Second Max.
Liquidous temperature (T
L
) 183°C 217°C
Time at liquidous (tL) 60-150 Seconds 60-150 Seconds
Peak package body temperature (TP)* Table 1Table 2
Time (tp)** within 5 °C of the specified classification temperature (Tc) 20 Seconds** 30 Seconds**
Average ramp-down rate (Tpto Tsmax) 6°C/ Second Max. 6°C/ Second Max.
Time 25°C to Peak Temperature 6 Minutes Max. 8 Minutes Max.
*Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum.
** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum.
Solder reow prole
Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support
systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to
result in significant injury to the user.
Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update,
without notice, any technical information contained in this bulletin.
Discontinued, Effective
September 15, 2016 or until
inventory is depleted.
Recommended replacement
MPIA40-V1
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Eaton:
MPIA4040R4-100-R MPIA4040R3-4R7-R MPIA4040R1-3R3-R MPIA4040R1-R10-R MPIA4040R1-R15-R
MPIA4040R4-R22-R MPIA4040R4-1R0-R MPIA4040R2-3R3-R MPIA4040R1-1R5-R MPIA4040R3-R47-R
MPIA4040R3-1R2-R MPIA4040R4-4R7-R MPIA4040R4-R33-R MPIA4040R2-2R2-R MPIA4040R4-1R5-R
MPIA4040R1-R47-R MPIA4040R4-2R2-R MPIA4040R1-R22-R MPIA4040R3-100-R MPIA4040R2-4R7-R
MPIA4040R1-R33-R MPIA4040R2-R47-R MPIA4040R3-2R2-R MPIA4040R2-100-R MPIA4040R2-1R5-R
MPIA4040R4-220-R MPIA4040R1-2R2-R MPIA4040R3-220-R MPIA4040R1-1R0-R MPIA4040R3-1R5-R
MPIA4040R1-4R7-R MPIA4040R2-1R0-R MPIA4040R1-R68-R MPIA4040R3-150-R MPIA4040R3-R22-R
MPIA4040R4-3R3-R