* High current capability
* High surge current capability
* Low forward voltage drop
* Fast switching for high efficiency
* Case : DO-41 Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
* Polarity : Color band denotes cathode end
* Mounting position : Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
C ambient temperature unless otherwise specified
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage VRRM 100 200 400 V
Maximum RMS Voltage VRMS 70 140 280 V
Maximum DC Blocking Voltage VDC 100 200 400 V
Maximum Average Forward Current
0.375"(9.5mm) Lead Length Ta = 55 °C
Maximum Peak Forward Surge Current,
8.3ms Single half sine wave Superimposed
on rated load (JEDEC Method)
Maximum Peak Forward Voltage at IF = 0.8 A VF1.3 V
Maximum DC Reverse Current Ta = 25 °CIR5µA
at Rated DC Blocking Voltage Ta = 100 °CIR(H) 50 µA
Maximum Reverse Recovery Time ( Note 1 ) Trr 250 ns
Typical Junction Capacitance ( Note 2 ) CJ50 pf
Junction Temperature Range TJ - 65 to + 150 °C
Storage Temperature Range TSTG - 65 to + 150 °C
Notes : (1) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC
Page 1 of 2 Rev. 02 : March 25, 2005
UNITRATING SYMBOL
A
A
IFSM
IF(AV) 0.8
35
Dimensions in inches and ( millimeters )
1.00 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
0.205 (5.2)
0.166 (4.2)
1.00 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)