U.S. CAGE Code 06324
IPT Series
Bayonet Lock
Connectors
www.glenair.com E-Mail: sales@glenair.com
B-102
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2008 Glenair, Inc. Printed in U.S.A.
IPT 08 AM
Plug Connector
with 90° EMI Shield Termination Backshell Suitable for
MS3057 Cable Clamp (Not Included)
G
IPT G 08 AM 18-11 S Z C XX
MIL-C-26482
Series l Type
Grounding Finger
(Omit for Standard)
08 - 90° Backshell
Connector/Backshell Class
AM - Non-Environmental with
Backshell for EMI Shield Termination
Shell Size and
Insert Arrangements
Mod Code Options
See Table II
Contact Type
C - Crimp
(Omit for Solder Cup)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
Contact Gender
P - Pin
S - Socket
APPLICATION NOTES
1. Plug with 90° backshell for cable clamp MS3057-A/B/C (not included).
2. Connector/Backshell Class “A” (non-environmental ) ––no grommet supplied.
3. Standard materials conguration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
APPLICATION NOTES
U.S. CAGE Code 06324
IPT Series
Bayonet Lock
Connectors
www.glenair.com E-Mail: sales@glenair.com
B-103
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2008 Glenair, Inc. Printed in U.S.A.
TABLE I: DIMENSIONS
Shell size F
Thread in inches
G
Max.
H
±1
L
±1
8 .5000 - 28 UNEF 19.05 19 32
10 .6250 - 24 UNEF 21.80 24 32
12 .7500 - 20 UNEF 26.20 27 35
14 .8750 - 20 UNEF 29.40 28 38
16 1.0000 - 20 UNEF 32.55 30 41
18 1.1875 - 18 UNEF 35.35 32 44
20 1.1875 - 18 UNEF 38.90 34 48
22 1.4375 - 18 UNEF 42.10 36 51
24 1.4375 - 18 UNEF 45.10 39 56
IPT 08 AM
Plug Connector
with 90° EMI Shield Termination Backshell Suitable for
MS3057 Cable Clamp (Not Included)
TABLE II: MODIFICATION CODES
Shell Finish
(Omit for Standard Cad/Olive Drab Finish)
Assembly with Accessories
(Omit for Standard Version)
F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version)
W, X, Y, Z = Alternates
F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell
F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector
F8 - Olive Drab Zn-Co Plating
STANDARD FINISHES (For QQ-A-591 Aluminum Shells)
Requirements IAW RoHS Not IAW RoHS
F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive G3 Cadmium with Olive
Drab Passivation
F8 Zinc Cobalt with
Olive Drab Passivation
Thermal Shock -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C
Salt Spray After
Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour
Electical Conductivity Very Good NO Very Good Very Good Good
Abrasion Resistance Very Good Very Good Good Very Good Good
