8 7 6 4 5 3 2 1 REVISION(S) D 2 LTR DESCRIPTION INIT APP'D O A ECN: 0S60-0121-04 ECR-06-003841 E.T 05/10/04 E.T 2/15/06 B.P 5/12/04 C.W 2/15/06 D PIN-FIN HS: 2.000 DIA. 1.100 HT. NOTE: 1. MATERIAL: HEAT SINK: ALUM. (BLACK ANODIZE) CLIP: BLACK PEI (UL94-VO) 1 3 2. BEFORE THE HEATSINK APPLICATION, THE USER SHOULD IDENTIFY THE SPECIFICATION OF MAXIMUM LOAD ON THE BGA PACKAGE. 4-LEG CLIP SIZE: 25mm HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE. BARE DIE PACKAGE: 1.5 INCH - LB TORQUE = 8.5 LBS FORCE 2.0 INCH - LB TORQUE =11.4 LBS FORCE C C FULL SIZE LID PACKAGE: 1.5 INCH - LB TORQUE = 8.3 LBS FORCE 2.0 INCH - LB TORQUE = 11.1 LBS FORCE .016.002 2.000.020 3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1 B 4. RoHS COMPLIANT AND CERTIFIED. DETAIL A SCALE =6X .970 MAX 1.100 .095 A .245.005 .115.005 .987 LIP LEG 1.069 C/W @ C/W @ C/W @ C/W @ Power Ambient 200 LFM 400 LFM 600 LFM 5 Watts 7.28 3.35 2.55 2.25 10 Watts 15 Watts A 8 5/8" - 27 UNS-2A THREAD B 7 ITEM DESCRIPTION QTY 1 MOUNTING CLIP 1 2 HEAT SINK 1 3 INTERFACE 1 6.37 6.00 DO NOT SCALE B 3.22 3.18 UNLESS OTHERWISE SPECIFIED TOLERANCES ARE: .XX .XXX .XXXX ANGLES . 2.42 2.38 DRAWN BY: ENGINEER: . FILENAME SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE SEE NOTE DATE 5/12/04 B.PETROCELLI . CUSTOMER DRAWING MATERIAL: 05/10/04 PROJECT SYSTEM .998 SECTION B-B 2.13 2.09 DATE E.TAO B CONFIDENTIAL PROPERTY OF TYCO ELECTRONICS. NOT TO BE DISCLOSED TO OTHERS. REPRODUCED OR USED FOR ANY PURPOSES EXCEPT AS AUTHORIZED IN WRITING BY AN AUTHORIZED OFFICIAL OF TYCO. MUST BE RETURNED TO TYCO ON DEMAND, ON COMPLETION OF ORDERS OR OTHER PURPOSES FOR WHICH LENT. DIMENSONS ARE IN: FINISH: INCHES SEE NOTE SCALE: 1:1 SIZE: TNIRD ANGLE PROJECTION A TITLE: A 25mm PIN FIN HS ASS'Y (HTS273NF-U) PART NO: DWG. NO. 2-1542001-9 C-2-1542001-9 SHEET: 1 OF 1 REV: A Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 2-1542001-9