TUNNEL DIODE DETECTOR MODULES The detectors listed are standard products. There are many possible variations, which can be selected as options. Package configurations can be changed if desired. Performance characteristics may be modified to meet special requirements (e.g. the sensitivity might be moved higher or lower with a corresponding effect on VSWR). RF bypass capacitance values can be selected on some models. Contact the factory for special needs. Features: * Exceptional Temperature Stability * Low Video Resistance (112 typical) * Flat Output vs. Frequency Over Broadband Performance * Very Fast Pulse Response * No Bias Required * Flexible Design Options Applications: * Transmitter Monitoring * Missile Guidance Systems * Input to Low-Noise Amplifiers * Broadband Or Narrowband ECM Receivers * Power and Signal Monitors * Doppler Radar and Beacon Receivers * Matched units available for Multi-channel Receivers, Amplitude Comparator Systems and Discriminators Frequency Range (GHz) 0.005 - 0.5 0.05 - 0.5 0.01 - 0.75 0.1 - 1 0.5 - 1.3 0.01 - 2 0.1 - 2 0.5 - 2 1-2 0.1 - 4 0.5 - 4 2-4 0.1 - 6 2-6 2-8 4-8 8 - 12 0.5 - 18 2 - 18 6 - 18 8 - 18 1 - 20 Part (1) Number Minimum (2) Sensitivity K (mV/mW) Flatness vs Frequency (+/-dB) Typical (3) TSS (dBm) ACTM1078N ACTM1155N ACTM1080N ACTM1037N ACTM1089N ACTM1069N ACTM1071N ACTM1001N ACTM1013N ACTM1073N ACTM1054N ACTM1002N ACTM1017N ACTM1006N ACTM1007N ACTM1003N ACTM1012N ACTM1020N ACTM1009N ACTM1058N ACTM1066N ACTM1144N 800 700 800 900 900 400 900 900 850 800 800 850 700 900 750 800 650 600 650 700 700 600 0.2 0.3 0.3 0.2 0.2 0.3 0.2 0.25 0.2 0.25 0.35 0.35 0.35 0.4 0.5 0.35 0.4 1.25 1.0 1.0 0.9 1.3 -50 -49 -50 -51 -51 -49 -51 -51 -51 -50 -51 -51 -50 -51 -50 -51 -50 -49 -50 -49 -49 -49 Typical (4) VSWR Standard (5) Video Capacitance (pF) Standard Case Styles Optional Case Styles 2.2:1 2.2:1 2.4:1 2.3:1 2.2:1 1.5:1 2.0:1 1.9:1 1.9:1 2.0:1 2.0:1 2.0:1 2.2:1 2.5:1 2.5:1 1.9:1 2.0:1 3.3:1 3.0:1 2.5:1 2.5:1 3.0:1 1000 470 1000 270 9 1000 75 75 20 75 39 39 75 20 20 20 12 20 20 9 9 20 M12 M35 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M35 M12 M35 M34 M34,M35,M47,M51 M35 M35 M34,M47 M34,M35,M47,M51 -- M34,M35,M47,M51 M34,M35,M47,M51 -- M51 M51 M51 M51 -- -- M51 -- M51 NOTES: 1) Standard output polarity is negative. If positive output is required, substitute "P" for "N" in part number. 2) Diode values can be changed to alter the level of sensitivity. As sensitivity is increased, VSWR will degrade. VSWR will improve as sensitivity is lowered. Flatness and TSS will also be influenced by these changes. If your applications require something special, please contact the factory. 3) Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with respect to noise. It is measured using a video amplifier with a 20MHz bandwidth and a 3dB noise figure. 4) VSWR measured at or below -20dBm input power level. 5) Video capacitance is used for RF bypass. This value can be changed if required for video response time or other considerations. Contact the factory if value other than those shown are needed. 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -65C to +100C Storage Temp: -65C to +100C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D Maximum Input Power: +14dBm (This allows for 3dB margin from possible burnout at +17dBm) 0.120 0.080 0.330 SCREENING : Standard Screening: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65C to +100C, 10 cycles Optional High-Rel Screening (Ref MIL-PRF-38534): Internal Visual per MIL-STD-883, Method 2017 Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883, Method 2001 Burn-in per MIL-STD-883, Method 1015 Leak Test per MIL-STD-883, Method 1014 External Visual per MIL-STD-883, Method 2009 0.250 0.120 0.400 MAX. 0.210 0.180 SQ. MAX. 0.050 (3) PLCS. CL O0.012 TYP. 0.246 .003 OUTPUT INPUT 0.015.003 TYP. 1 8 2 7 3 6 4 5 0.150 0.129 0.080 MAX. PIN FUNCTION 1 2 3 4 5 6 7 8 N/C RF INPUT N/C GROUND N/C OUTPUT N/C GROUND 0.005.002 0.058 TYP. CASE STYLE M12 CASE STYLE M47 O0.500.002 O0.360.002 O0.450.002 O0.300.002 0.280.005 0.079.002 COLORED DOT INPUT O0.096.003 THRU 0.160 0.200 0.160 0.185.015 0.185.015 0.080 .001 0.018.002 (4) PLCS. 0.135 .010 (2) PLCS. 0.020 MAX. (TO FLAT) 0.018.002 (4) PLCS. GND GND RF IN 0.004 X 0.020 MIN. (2) PLCS. 0.205.003 RF IN 0.200.005 TYP. 0.300.005 0.050 MAX. 0.126 .004 0.062.002 0.031.003 VIDEO OUT 0.034.005 VIDEO OUT 0.031.003 N/C N/C 453 TYP. CASE STYLE M51 Part Number Ordering Information: 453 TYP. CASE STYLE M34 CASE STYLE M35 Example: ACTM1002NM1220 ACTM1002: Tunnel Module Detector, 2 - 4GHz N: Negative output polarity M12: Package type 20: 20pF custom video capacitance (omit for standard value) TM-0205 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com