611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com
Features:
• Exceptional Temperature Stability
• Low Video Resistance (112Ω typical)
• Flat Output vs. Frequency Over Broadband Performance
• Very Fast Pulse Response
• No Bias Required
• Flexible Design Options
Applications:
• Transmitter Monitoring
• Missile Guidance Systems
• Input to Low-Noise Amplifiers
• Broadband Or Narrowband ECM Receivers
• Power and Signal Monitors
• Doppler Radar and Beacon Receivers
• Matched units available for Multi-channel Receivers, Amplitude Comparator Systems and Discriminators
Minimum (2) Flatness Standard (5)
Frequency Sensitivity vs Typical (3) Video Standard Optional
Range Part (1) K Frequency TSS Typical (4) Capacitance Case Case
(GHz) Number (mV/mW) (+/-dB) (dBm) VSWR (pF) Styles Styles
0.005 - 0.5 ACTM1078N 800 0.2 -50 2.2:1 1000 M12 M35
0.05 - 0.5 ACTM1155N 700 0.3 -49 2.2:1 470 M35 M12
0.01 - 0.75 ACTM1080N 800 0.3 -50 2.4:1 1000 M12 M35
0.1 - 1 ACTM1037N 900 0.2 -51 2.3:1 270 M12 M34
0.5 - 1.3 ACTM1089N 900 0.2 -51 2.2:1 9 M12 M34,M35,M47,M51
0.01 - 2 ACTM1069N 400 0.3 -49 1.5:1 1000 M12 M35
0.1 - 2 ACTM1071N 900 0.2 -51 2.0:1 75 M12 M35
0.5 - 2 ACTM1001N 900 0.25 -51 1.9:1 75 M12 M34,M47
1 - 2 ACTM1013N 850 0.2 -51 1.9:1 20 M12 M34,M35,M47,M51
0.1 - 4 ACTM1073N 800 0.25 -50 2.0:1 75 M12 —
0.5 - 4 ACTM1054N 800 0.35 -51 2.0:1 39 M12 M34,M35,M47,M51
2 - 4 ACTM1002N 850 0.35 -51 2.0:1 39 M12 M34,M35,M47,M51
0.1 - 6 ACTM1017N 700 0.35 -50 2.2:1 75 M12 —
2 - 6 ACTM1006N 900 0.4 -51 2.5:1 20 M12 M51
2 - 8 ACTM1007N 750 0.5 -50 2.5:1 20 M12 M51
4 - 8 ACTM1003N 800 0.35 -51 1.9:1 20 M12 M51
8 - 12 ACTM1012N 650 0.4 -50 2.0:1 12 M12 M51
0.5 - 18 ACTM1020N 600 1.25 -49 3.3:1 20 M12 —
2 - 18 ACTM1009N 650 1.0 -50 3.0:1 20 M12 —
6 - 18 ACTM1058N 700 1.0 -49 2.5:1 9 M12 M51
8 - 18 ACTM1066N 700 0.9 -49 2.5:1 9 M12 —
1 - 20 ACTM1144N 600 1.3 -49 3.0:1 20 M12 M51
NOTES:
1) Standard output polarity is negative. If positive output is required, substitute “P” for “N” in part number.
2) Diode values can be changed to alter the level of sensitivity. As sensitivity is increased, VSWR will degrade. VSWR will improve as
sensitivity is lowered. Flatness and TSS will also be influenced by these changes. If your applications require something special,
please contact the factory.
3) Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with respect to noise. It is measured using a video amplifier with
a 20MHz bandwidth and a 3dB noise figure.
4) VSWR measured at or below -20dBm input power level.
5) Video capacitance is used for RF bypass. This value can be changed if required for video response time or other considerations.
Contact the factory if value other than those shown are needed.
The detectors listed are standard products. There are many possible
variations, which can be selected as options. Package configurations can be
changed if desired. Performance characteristics may be modified to meet
special requirements (e.g. the sensitivity might be moved higher or lower with a
corresponding effect on VSWR). RF bypass capacitance values can be
selected on some models. Contact the factory for special needs.
TUNNEL DIODE DETECTOR MODULES
611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com
ENVIRONMENTAL SPECIFICATIONS: SCREENING :
MIL-E-5400, MIL-STD-202, MIL-E-16400 Standard Screening:
Operating Temp: -65°C to +100°C Internal Visual per MIL-STD-883, Method 2017
Storage Temp: -65°C to +100°C Temperature Cycle: -65°C to +100°C, 10 cycles
Humidity: MIL-STD-202F, M103, Cond B Optional High-Rel Screening (Ref MIL-PRF-38534):
Shock: MIL-STD-202F, M213, Cond B Internal Visual per MIL-STD-883, Method 2017
Altitude: MIL-STD-202F, M105, Cond B Stabilization Bake per MIL-STD-883, Method 1008
Vibration : MIL-STD-202F, M204, Cond B Temperature Cycle per MIL-STD-883, Method 1010
Thermal Shock: MIL-STD-202F, M107, Cond A Constant Acceleration per MIL-STD-883, Method 2001
Temperature Cycle: MIL-STD-202F, M105C, Cond D Burn-in per MIL-STD-883, Method 1015
Maximum Input Power: +14dBm Leak Test per MIL-STD-883, Method 1014
(This allows for 3dB margin from possible burnout at +17dBm) External Visual per MIL-STD-883, Method 2009
CASE STYLE M12 CASE STYLE M47
CASE STYLE M51 CASE STYLE M34 CASE STYLE M35
Part Number Ordering Information: Example: ACTM1002NM1220
ACTM1002: Tunnel Module Detector, 2 - 4GHz
N: Negative output polarity
M12: Package type
20: 20pF custom video capacitance (omit for standard value)
TM-0205
0.050
(3) PLCS.
1
2
3
4
0.015±.003
TYP.
0.150
0.400 MAX.
0.210
0.180
SQ. MAX.
GROUND
N/C
OUTPUT
N/C
GROUND
N/C
RF INPUT
N/C
8
7
6
5
4
3
2
1
PIN FUNCTION
0.005±.002
0.080
MAX.
8
7
6
5
0.129
Ø0.012
TYP.
0.330
INPUT
0.120
0.080
0.246
±.003
OUTPUT
0.250
0.120
0.058
TYP.
C
L
0.004 X 0.020
MIN. (2) PLCS.
0.020 MAX.
(TO FLAT)
COLORED DOT
INPUT
0.280±.005
0.160
0.205±.003
0.135
±.010
(2) PLCS.
Ø0.096±.003
THRU
0.126
±.004
0.062±.002
0.079±.002
0.080
±.001
Ø0.500±.002
Ø0.450±.002
0.200
0.185±.015
0.031±.003
0.050
MAX.
0.300±.005
0.018±.002
(4) PLCS.
45°±3°
TYP.
RF IN
N/C
VIDEO OUT
GND
RF IN
VIDEO
OUT
N/C
GND
Ø0.360±.002
Ø0.300±.002
0.160
0.185±.015
0.031±.003
0.034±.005
45°±3°
TYP.
0.200±.005
TYP.
0.018±.002
(4) PLCS.
