Industrial Circular Standard USB Panel- Mount Connector System 114- 13211
Rev E 3 of 13Tyco Electronics Corporation
2. REFERENCE MATERIAL
2.1. Revision Summary
SUpdated document to corporate requirements
SAdded new text to Paragraph 3.4.A
2.2. Customer Assistance
Reference Product Base Part Number 1954637 and Product Code K357 are representative of Industrial
Circular Standard USB Panel--Mount Connector System. Use of these numbers will identify the product line
and expedite your inquiries through a service network established to help you obtain product and tooling
information. Such information can be obtained through a local Tyco Electronics Representative or, after
purchase, by calling PRODUCT INFORMATION at the number at the bottom of page 1.
2.3. Drawings
Customer Drawings for product part numbers are available from the service network. If there is a conflict
between the information contained in the Customer Drawings and this specification or with any other technical
documentation supplied, call PRODUCT INFORMATION at the number at the bottom of page 1.
2.4. Specifications
Product Specification 108--2318 provides product performance and test information.
2.5. Instructional Material
Instruction Sheets (408--series) provide product assembly instructions. Documents available which pertain to
this product are:
408--10171 Industrial Circular USB Panel--Mount Connectors
2.6. Standards and Publications
Standards and publications developed by the International Electrotechnical Commission (IEC) and Association
of Connecting Electronics Industries (IPC) provide industry test and performance requirements. Documents
available which pertain to this product are:
IEC 60529, “Degrees of Protection Provided by Enclosures”
IPC--A--610, “Acceptability of Electronic Assemblies”
3. REQUIREMENTS
3.1. Safety
Do not stack product shipping containers so high that the containers buckle or deform.
3.2. Limitations
The connectors are designed to operate in a temperature range of 0_to 50_C[32_to 122_F] and for a
non--operating temperature range of --20_to 60_C[--4_to 140_F].
3.3. Storage
A. Ultraviolet Light
Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the connector
material.
B. Shelf Life
The connectors should remain in the shipping containers until ready for use to prevent deformation to the
contacts. The connectors should be used on a first in, first out basis to avoid storage contamination that
could adversely affect performance.
C. Chemical Exposure
Do not store connectors near any chemical listed below as they may cause stress corrosion cracking in
the contacts.
Alkalies Ammonia Citrates Phosphates Citrates Sulfur Compounds
Amines Carbonates Nitrites Sulfur Nitrites Tartrates