0.8 mm pitch connector For PCB Right-angle through hole type female connector for PCB HDRA-EC68LFDT( )-( )+ Right-angle Through hole ANSI/SFF8441 Configuration of product Part No. HDRA- EC 68 LFD T ( )- ( )+ Series name S : A-2.08 mm contacts B-2.28 mm board lock pins No. of contacts: 68 Type of contact C-2.3 mm location peg LFD: Right-angle through hole type, female 2 : A-2.08 mm contacts With board lock pin B-2.28 mm board lock pins Length of contact, board lock pins or location peg C-1.4 mm location peg Blank: A-2.08 mm contacts Lock screws : B-2.28 mm board lock pins Blank : None : C-3.7 mm location peg SL : provided (Thickness of panel: 1.12 mm) 0.05 26.80.05 1.60.03 POS.#68 Edge of PCB 4.880.08 2.40.08 A 0.3 0.8 6 3.5 35 C 1 68 32.35 41.9 : PAD Recommended PCB layout t=1.6mm B 3.46 41.90.05 0.8 34 0.08 2-o1.75 32.350.05 POS.#2 POS.#1 0.05 2-o1.2 (P.T.H.) PAD o2.250.1 1.2 0.03 0.40.03 4.775 REF. 42.7 37.7 31.65 28.3 0.833=26.4 POS.#1 4.90.1 HDRA LFD (Two lock screws are supplied with a connector.) 6.3MAX. 4.30.1 2.6250.05 14.7 9.5 POS.#2 0.80.03 0.05 68-o0.65 (P.T.H.) PAD o10.1 1.150.03 0.4 2.250.05 26.8 1.150.03 3.40.1 2.775 0.3 3.925 0.1 34.7-0 1.15 5.3 R 1.55 1.2 1.15 Components 37.70.1 Contacts Brackets Insulator Recommended panel cut-out dimensions Select the connector according to panel thickness. For the application without panel, use washers or special lock screw (P/N: HDRA-E68LFD-7C). Hold downs Shell Lock screws Mating connector: HDRA series IDC type male cable connector, or straddle SMT type male connector Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole