DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D087 BCP69 PNP medium power transistor Product specification Supersedes data of 1999 Apr 08 2002 Nov 15 Philips Semiconductors Product specification PNP medium power transistor BCP69 FEATURES PINNING * High current (max. 1 A) PIN * Low voltage (max. 20 V). DESCRIPTION 1 base 2, 4 APPLICATIONS collector 3 emitter * General purpose switching and amplification * Power applications such as audio output stages. 4 handbook, halfpage 2, 4 DESCRIPTION PNP medium power transistor in a SOT223 plastic package. NPN complement: BCP68. 1 3 1 2 3 Top view MAM288 Fig.1 Simplified outline (SOT223) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT open emitter - -32 collector-emitter voltage open base - -20 V emitter-base voltage open collector - -5 V collector current (DC) - -1 A ICM peak collector current - -2 A IBM peak base current Ptot total power dissipation Tstg VCBO collector-base voltage VCEO VEBO IC V - -200 mA - 1.35 W storage temperature -65 +150 C Tj junction temperature - 150 C Tamb operating ambient temperature -65 +150 C Tamb 25 C; note 1 Note 1. Device mounted on a printed-circuit board, single-sided copper, tinplated, mounting pad for collector 1 cm2. For other mounting conditions, see "Thermal considerations for SOT223 in the General Part of associated Handbook". 2002 Nov 15 2 Philips Semiconductors Product specification PNP medium power transistor BCP69 THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS Rth j-a thermal resistance from junction to ambient Rth j-s thermal resistance from junction to soldering point VALUE note 1 UNIT 91 K/W 10 K/W Note 1. Device mounted on a printed-circuit board, single-sided copper, tinplated, mounting pad for collector 1 cm2. For other mounting conditions, see "Thermal considerations for SOT223 in the General Part of associated Handbook". CHARACTERISTICS Tj = 25 C unless otherwise specified. SYMBOL ICBO PARAMETER collector cut-off current CONDITIONS MIN. TYP. MAX. UNIT IE = 0; VCB = -25 V - - -100 nA IE = 0; VCB = -25 V; Tj = 150 C - - -10 A nA IEBO emitter cut-off current IC = 0; VEB = -5 V - - -100 hFE DC current gain IC = -5 mA; VCE = -10 V 50 - - IC = -500 mA; VCE = -1 V; see Fig.2 85 - 375 IC = -1 A; VCE = -1 V; see Fig.2 60 - - 100 - 250 160 - 375 140 - 230 DC current gain IC = -500 mA; VCE = -1 V; see Fig.2 BCP69-16 BCP69-25 DC current gain IC = -10 mA; VCE = -1.8 V; see Fig.3 BCP69-16/IN VCEsat collector-emitter saturation voltage IC = -1 A; IB = -100 mA VBE base-emitter voltage - - -500 mV IC = -5 mA; VCE = -10 V - -620 - mV IC = -1 A; VCE = -1 V - - -1 V IE = ie = 0; VCB = -5 V; f = 1 MHz - 48 - pF MHz Cc collector capacitance fT transition frequency IC = -10 mA; VCE = -5 V; f = 100 MHz 40 - - h FE1 ----------h FE2 DC current gain ratio of the complementary pairs IC = 0.5 A; VCE = 1 V - 1.6 2002 Nov 15 3 - Philips Semiconductors Product specification PNP medium power transistor BCP69 MGD845 400 handbook, full pagewidth hFE 300 200 100 0 -10-1 -1 -10 -102 -103 IC (mA) -104 BCP69 VCE = -1 V. Fig.2 DC current gain; typical values. MBL745 400 handbook, full pagewidth hFE 300 (1) 200 (2) 100 (3) 0 -10-1 BCP69-16/IN VCE = -1.8 V. -1 (1) Tamb = 150 C. (2) Tamb = 25 C. -10 (3) Tamb = -40 C. Fig.3 DC current gain; typical values. 2002 Nov 15 4 -102 IC (mA) -103 Philips Semiconductors Product specification PNP medium power transistor BCP69 PACKAGE OUTLINE Plastic surface mounted package; collector pad for good heat transfer; 4 leads D SOT223 E B A X c y HE v M A b1 4 Q A A1 1 2 3 Lp bp e1 w M B detail X e 0 2 4 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 bp b1 c D E e e1 HE Lp Q v w y mm 1.8 1.5 0.10 0.01 0.80 0.60 3.1 2.9 0.32 0.22 6.7 6.3 3.7 3.3 4.6 2.3 7.3 6.7 1.1 0.7 0.95 0.85 0.2 0.1 0.1 OUTLINE VERSION SOT223 2002 Nov 15 REFERENCES IEC JEDEC EIAJ SC-73 5 EUROPEAN PROJECTION ISSUE DATE 97-02-28 99-09-13 Philips Semiconductors Product specification PNP medium power transistor BCP69 DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2002 Nov 15 6 Philips Semiconductors Product specification PNP medium power transistor BCP69 NOTES 2002 Nov 15 7 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA74 (c) Koninklijke Philips Electronics N.V. 2002 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/04/pp8 Date of release: 2002 Nov 15 Document order number: 9397 750 10588