LITE-ON DCC
RELEASE
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LED Display
Product Data Sheet
LTL-53173Y
Spec No.: DS30-2000-355
Effective Date: 05/17/2012
Revision: C
BNS-OD-FC001/A4
BNS-OD-FC001/A4
BNS-OD-FC001/A4
BNS-OD-FC001/A4
LITE-ON TECHNOLOGY CORPORATION
Property
of
Lite-On
Only
PART NO.: LTL-53173Y
BNS-OD-C131/A4
FEATURES
LARGE, BRIGHT, UNIFORM LIGHT EMITTING AREAS.
LOW POWER REQUIREMENT.
EXCELLENT ON-OFF CONTRAST.
CAN BE USED WITH PANEL AND LEGEND MOUNT.
WIDE VIEWING ANGLE.
SOLID STATE RELIABILITY.
CATEGORIZED FOR LIGHT OUTPUT.
DESCRIPTION
The LTL-53173Y is a rectangular light source display that is designed
for a variety of applications where a large bright source of light is
required. This device utilizes yellow LED chips that are made from
GaAsP on a transparent GaP substrate, and has yellow bar color.
DEVICE
PART NO.
DESCRIPTION
YELLOW
Universal
Rectangular Bar
LTL-53173Y
LITE-ON TECHNOLOGY CORPORATION
Property
of
Lite-On
Only
PART NO.: LTL-53173Y
BNS-OD-C131/A4
PACKAGE DIMENSIONS
NOTES: All dimensions are in millimeters. Tolerance is 0.25-mm (0.01“) unless otherwise noted.
INTERNAL CIRCUIT DIAGRAM
LITE-ON TECHNOLOGY CORPORATION
Property
of
Lite-On
Only
PART NO.: LTL-53173Y
BNS-OD-C131/A4
PIN CONNECTION
No.
CONNECTION
1
CATHODE A
2
NO PIN
3
ANODE B
4
CATHODE B
5
NO CONNECTION
6
ANODE A
LITE-ON TECHNOLOGY CORPORATION
Property
of
Lite-On
Only
PART NO.: LTL-53173Y
BNS-OD-C131/A4
ABSOLUTE MAXIMUM RATING AT TA=25oC
PARAMETER
MAXIMUM RATING
UNIT
Power Dissipation Per Bar
60
mW
Peak Forward Current Per Bar
( 1/10 Duty Cycle, 0.1ms Pulse Width )
80
mA
Continuous Forward Current Per Bar
Derating Linear From 250C Per Bar
20
0.27
mA
mA/0C
Operating Temperature Range
-350C to +850C
Storage Temperature Range
-350C to +850C
Solder Temperature 1/16 inch Below Seating Plane for 3 Seconds at 2600C
ELECTRICAL / OPTICAL CHARACTERISTICS AT TA=25oC
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
TEST CONDITION
Average Luminous Intensity
IV
2300
4200
cd
IF=10mA
Peak Emission Wavelength
p
585
nm
IF=20mA
Spectral Line Half-Width

35
nm
IF=20mA
Dominant Wavelength
d
588
nm
IF=20mA
Forward Voltage. Per Bar
VF
2.1
2.6
V
IF=20mA
Reverse Current, Per Bar
IR
100
A
VR=5V
Note: 1. Luminous intensity is measured with a light sensor and filter combination that
approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve.
2. Reverse voltage is only for IR test. It can not continue to operate at this situation.
LITE-ON TECHNOLOGY CORPORATION
Property
of
Lite-On
Only
PART NO.: LTL-53173Y
BNS-OD-C131/A4
TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES
(25oC Ambient Temperature Unless Otherwise Noted)