R32C/111 Group Datasheet R32C/111 Group RENESAS MCU 1. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Overview 1.1 Features The M16C Family offers a robust platform of 32-/16-bit CISC microcomputers (MCUs) featuring high ROM code efficiency, extensive EMI/EMS noise immunity, ultra-low power consumption, high-speed processing in actual applications, and numerous and varied integrated peripherals. Extensive device scalability from low- to high-end, featuring a single architecture as well as compatible pin assignments and peripheral functions, provides support for a vast range of application fields. The R32C/100 Series is a high-end microcontroller series in the M16C Family. With a 4-Gbyte memory space, it achieves maximum code efficiency and high-speed processing with 32-bit CISC architecture, multiplier, multiply-accumulate unit, and floating point unit. The selection from the broadest choice of onchip peripheral devices -- UART, CRC, DMAC, A/D and D/A converters, timers, I2C, and WDT enables to minimize external components. The R32C/100 Series, in particular, provides the R32C/111 Group as a standard product. This product, provided as 100-pin plastic molded LGA, and 100-/80-/64-pin plastic molded LQFP package, configures a maximum of nine channels of serial interface. 1.1.1 Applications Audio, cameras, television, home appliance, printer, meter, office/industrial equipment, communication/ portable devices REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 1 of 99 R32C/111 Group 1.1.2 1. Overview Performance Overview Table 1.1 to Table 1.6 show the performance overview of the R32C/111 Group. Table 1.1 R32C/111 Group Performance for the 100-pin Package (1/2) Unit CPU Function Central processing unit Memory Performance R32C/100 Series CPU Core * Basic instructions: 108 * Minimum instruction execution time: 20 ns (f(CPU) = 50 MHz) * Multiplier: 32-bit x 32-bit 64-bit * Multiply-accumulate unit: 32-bit x 32-bit + 64-bit 64-bit * IEEE-754 floating point standard: Single precision * 32-bit barrel shifter * Operating mode: Single-chip mode, memory expansion mode, microprocessor mode (optional (1)) Flash memory: 256 to 512 Kbytes RAM: 32 to 63 Kbytes Data flash: 4 Kbytes x 2 blocks Refer to Table 1.7 for memory size of each product group Voltage Detector Low voltage detector Optional (1) Low voltage detection interrupt Clock Clock generator * 4 circuits (main clock, sub clock, PLL, on-chip oscillator) * Oscillation stop detector: Main clock oscillator stop/re-oscillation detection * Frequency divide circuit: Divide-by-2 to divide-by-24 selectable * Low power modes: Wait mode, stop mode External Bus Expansion Bus and memory expansion * Address space: 4 Gbytes (of which up to 64 Mbytes is user accessible) * External bus Interface: Support for wait-state insertion, 4 chip select outputs, 3V/5V interface * Bus format: Separate bus/Multiplexed bus selectable, data bus width selectable (8/16 bits) Interrupts Interrupt vectors: 261 External interrupt inputs: NMI, INT x 6, key input x 4 Interrupt priority levels: 7 levels Watchdog Timer 15 bits x 1 (selectable input frequency from prescaler output) DMA DMAC 4 channels * Cycle-steal transfer mode * Request sources: 51 * 2 transfer modes: Single transfer, repeat transfer DMAC II * Can be activated by any peripheral interrupt source * 3 transfer functions: Immediate data transfer, calculation transfer, chained transfer Programmable I/O ports * 2 input-only ports * 82 CMOS inputs/outputs * 2 N-channel open drain ports * A pull-up resistor is selectable for every 4 input ports I/O Ports Note: 1. Please contact a Renesas sales office to use the optional feature. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 2 of 99 R32C/111 Group Table 1.2 1. Overview R32C/111 Group Performance for the 100-pin Package (2/2) Unit Timer Serial Interface Function Performance Timer A 16-bit timer x 5 Timer mode, event counter mode, one-shot timer mode, pulse-width modulation (PWM) mode Two-phase pulse signal processing in event counter mode (twophase encoder input) x 3 Timer B 16-bit timer x 6 Timer mode, event counter mode, pulse frequency measurement mode, pulse-width measurement mode Three-phase motor control timer Three-phase motor control timer x1 (timers A1, A2, A4, and B2 used) 8-bit programmable dead time timer UART0 to UART8 Asynchronous/synchronous serial interface x 9 channels * I2C-bus (UART0 to UART6) * Special mode 2 (UART0 to UART6) * IEBus (1) (optional (2)) (UART0 to UART6) A/D Converter 10-bit resolution x 26 channels Sample and hold functionality integrated D/A Converter 8-bit resolution x 2 CRC Calculator CRC-CCITT (X16 + X12 + X5 + 1) X-Y Converter 16 bits x 16 bits Intelligent I/O Time measurement (input capture): 16 bits x 16 Waveform generation (output compare): 16 bits x 19 Serial interface: Variable-length synchronous serial I/O mode, IEBus (1) mode (optional (2)) Flash Memory Programming and erasure supply voltage: VCC1 = VCC2 = 3.0 to 5.5 V Minimum endurance: 1,000 program/erase cycles Security protection: ROM code protect, ID code protect Debugging: On-chip debug, on-board flash programming Operating Frequency/Supply Voltage 50 MHz/VCC1 = 3.0 to 5.5 V, VCC2 = 3.0 V to VCC1 Operating Temperature -20C to 85C (version N) -40C to 85C (version D) Current Consumption 32 mA (VCC1 = VCC2 = 5.0 V, f(CPU) = 50 MHz) 8 A (VCC1 = VCC2 = 3.3 V, f(XCIN) = 32.768 kHz, in wait mode) Package 100-pin plastic molded LQFP (PLQP0100KB-A) 100-pin plastic molded TFLGA (PTLG0100KA-A) Notes: 1. IEBus is a trademark of NEC Electronics Corporation. 2. Please contact a Renesas sales office to use the optional feature. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 3 of 99 R32C/111 Group Table 1.3 1. Overview R32C/111 Group Performance for the 80-pin Package (1/2) Unit CPU Function Central processing unit Memory Performance R32C/100 Series CPU Core * Basic instructions: 108 * Minimum instruction execution time: 20 ns (f(CPU) = 50 MHz) * Multiplier: 32-bit x 32-bit 64-bit * Multiply-accumulate unit: 32-bit x 32-bit + 64-bit 64-bit * IEEE-754 floating point standard: Single precision * 32-bit barrel shifter * Operating mode: Single-chip mode, memory expansion mode, microprocessor mode (optional (1)) Flash memory: 128/256 Kbytes RAM: 32 Kbytes Data flash: 4 Kbytes x 2 blocks Refer to Table 1.7 for memory size of each product group Voltage Detector Low voltage detector Optional (1) Low voltage detection interrupt Clock Clock generator * 4 circuits (main clock, sub clock, PLL, on-chip oscillator) * Oscillation stop detector: Main clock oscillator stop/re-oscillation detection * Frequency divide circuit: Divide-by-2 to divide-by-24 selectable * Low power modes: Wait mode, stop mode Interrupts Interrupt vectors: 261 External interrupt inputs: NMI, INT x 6, key input x 4 Interrupt priority levels: 7 levels Watchdog Timer 15 bits x 1 (selectable input frequency from prescaler output) DMA DMAC 4 channels * Cycle-steal transfer mode * Request sources: 47 * 2 transfer modes: Single transfer, repeat transfer DMAC II * Can be activated by any peripheral interrupt source * 3 transfer functions: Immediate data transfer, calculation transfer, chained transfer Programmable I/O ports * 1 input-only port * 65 CMOS inputs/outputs * 2 N-channel open drain ports * A pull-up resistor is selectable for every 4 input ports I/O Ports Note: 1. Please contact a Renesas sales office to use the optional feature. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 4 of 99 R32C/111 Group Table 1.4 1. Overview R32C/111 Group Performance for the 80-pin Package (2/2) Unit Timer Serial Interface Function Performance Timer A 16-bit timer x 5 Timer mode, event counter mode, one-shot timer mode, pulse-width modulation (PWM) mode Two-phase pulse signal processing in event counter mode (twophase encoder input) x 3 Timer B 16-bit timer x 6 (1) Timer mode, event counter mode, pulse frequency measurement mode, pulse-width measurement mode Three-phase motor control timer Three-phase motor control timer x1 (timers A1, A2, A4, and B2 used) 8-bit programmable dead time timer UART0 to UART5, UART8 Asynchronous/synchronous serial interface x 7 channels * I2C-bus (UART0 to UART5) * Special mode 2 (UART0 to UART3, UART5) * IEBus (2) (optional (3)) (UART0 to UART5) A/D Converter 10-bit resolution x 26 channels Sample and hold functionality integrated D/A Converter 8-bit resolution x 1 CRC Calculator CRC-CCITT (X16 + X12 + X5 + 1) X-Y Converter 16 bits x 16 bits Intelligent I/O Time measurement (input capture): 16 bits x 16 Waveform generation (output compare): 16 bits x 19 Serial interface: Variable-length synchronous serial I/O mode, IEBus (2) mode (optional (3)) Flash Memory Programming and erasure supply voltage: VCC1 = 3.0 to 5.5 V Minimum endurance: 1,000 program/erase cycles Security protection: ROM code protect, ID code protect Debugging: On-chip debug, on-board flash programming Operating Frequency/Supply Voltage 50 MHz/VCC1 = 3.0 to 5.5 V Operating Temperature -20C to 85C (version N) -40C to 85C (version D) Current Consumption 32 mA (VCC1 = 5.0 V, f(CPU) = 50 MHz) 8 A (VCC1 = 3.3 V, f(XCIN) = 32.768 kHz, in wait mode) Package 80-pin plastic molded LQFP (PLQP0080KB-A) Notes: 1. Timer B4 is available in timer mode only. 2. IEBus is a trademark of NEC Electronics Corporation. 3. Please contact a Renesas sales office to use the optional feature. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 5 of 99 R32C/111 Group Table 1.5 1. Overview R32C/111 Group Performance for the 64-pin Package (1/2) Unit CPU Function Central processing unit Memory Performance R32C/100 Series CPU Core * Basic instructions: 108 * Minimum instruction execution time: 20 ns (f(CPU) = 50 MHz) * Multiplier: 32-bit x 32-bit 64-bit * Multiply-accumulate unit: 32-bit x 32-bit + 64-bit 64-bit * IEEE-754 floating point standard: Single precision * 32-bit barrel shifter * Operating mode: Single-chip mode, memory expansion mode, microprocessor mode (optional (1)) Flash memory: 128/256 Kbytes RAM: 32 Kbytes Data flash: 4 Kbytes x 2 blocks Refer to Table 1.7 for memory size of each product group Voltage Detector Low voltage detector Optional (1) Low voltage detection interrupt Clock Clock generator * 4 circuits (main clock, sub clock, PLL, on-chip oscillator) * Oscillation stop detector: Main clock oscillator stop/re-oscillation detection * Frequency divide circuit: Divide-by-2 to divide-by-24 selectable * Low power modes: Wait mode, stop mode Interrupts Interrupt vectors: 261 External interrupt inputs: NMI, INT x 6, key input x 4 Interrupt priority levels: 7 levels Watchdog Timer 15 bits x 1 (selectable input frequency from prescaler output) DMA DMAC 4 channels * Cycle-steal transfer mode * Request sources: 45 * 2 transfer modes: Single transfer, repeat transfer DMAC II * Can be activated by any peripheral interrupt source * 3 transfer functions: Immediate data transfer, calculation transfer, chained transfer Programmable I/O ports * 1 input-only port * 49 CMOS inputs/outputs * 2 N-channel open drain ports * A pull-up resistor is selectable for every 4 input ports I/O Ports Note: 1. Please contact a Renesas sales office to use the optional feature. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 6 of 99 R32C/111 Group Table 1.6 1. Overview R32C/111 Group Performance for the 64-pin Package (2/2) Unit Timer Serial Interface Function Performance Timer A 16-bit timer x 5 Timer mode, event counter mode, one-shot timer mode, pulse-width modulation (PWM) mode Two-phase pulse signal processing in event counter mode (twophase encoder input) x 3 Timer B 16-bit timer x 6 (1) Timer mode, event counter mode, pulse frequency measurement mode, pulse-width measurement mode Three-phase motor control timer Three-phase motor control timer x1 (timers A1, A2, A4, and B2 used) 8-bit programmable dead time timer UART0 to UART3, UART5, UART8 Asynchronous/synchronous serial interface x 6 channels * I2C-bus (UART0 to UART3, UART5) * Special mode 2 (UART0 to UART3, UART5) * IEBus (2) (optional (3)) (UART0 to UART3, UART5) A/D Converter 10-bit resolution x 20 channels Sample and hold functionality integrated D/A Converter 8-bit resolution x 1 CRC Calculator CRC-CCITT (X16 + X12 + X5 + 1) X-Y Converter 16 bits x 16 bits Intelligent I/O Time measurement (input capture): 16 bits x 16 Waveform generation (output compare): 16 bits x 19 Serial interface: Variable-length synchronous serial I/O mode, IEBus (2) mode (optional (3)) Flash Memory Programming and erasure supply voltage: VCC1 = 3.0 to 5.5 V Minimum endurance: 1,000 program/erase cycles Security protection: ROM code protect, ID code protect Debugging: On-chip debug, on-board flash programming Operating Frequency/Supply Voltage 50 MHz/VCC1 = 3.0 to 5.5 V Operating Temperature -20C to 85C (version N) -40C to 85C (version D) Current Consumption 32 mA (VCC1 = 5.0 V, f(CPU) = 50 MHz) 8 A (VCC1 = 3.3 V, f(XCIN) = 32.768 kHz, in wait mode) Package 64-pin plastic molded LQFP (PLQP0080KB-A) Notes: 1. Timer B4 is available in timer mode only. 2. IEBus is a trademark of NEC Electronics Corporation. 3. Please contact a Renesas sales office to use the optional feature. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 7 of 99 R32C/111 Group 1.2 1. Overview Product Information Table 1.7 lists the product information and Figure 1.1 shows the details of the part number. Table 1.7 R32C/111 Group Product List Package Code (1) ROM Capacity (2) RAM Capacity Part Number R5F64110NFB (P) (P) 384 Kbytes +8 Kbytes R5F64111DFB R5F64112NFB (P) R5F64112DFB R5F64114NFB (P) R5F64115NFB (P) 384 Kbytes +8 Kbytes (P) R5F64112NLG R5F64112DLG (P) (P) R5F6411ENFP (P) R5F6411EDFP (P) R5F6411FNFP (P) R5F6411FDFP (P) R5F6411ENFN (P) R5F6411EDFN (D) R5F6411FNFN (P) -40C to 85C (version D) 40 Kbytes PTLG0100KA-A -20C to 85C (version N) 32 Kbytes -20C to 85C (version N) -40C to 85C (version D) -40C to 85C (version D) 256 Kbytes +8 Kbyts -20C to 85C (version N) 128 Kbytes +8 Kbyts -20C to 85C (version N) -40C to 85C (version D) 32 Kbytes 256 Kbytes +8 Kbyts (D): Under development (P): On planning phase Notes: 1. The old package codes are as follows: PLQP0100KB-A: 100P6Q-A PTLG0100KA-A: 100F0M PLQP0080KB-A: 80P6Q-A PLQP0064KB-A: 64P6Q-A 2. Data flash memory provides an additional 8 Kbytes of ROM capacity. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 8 of 99 -20C to 85C (version N) -20C to 85C (version N) 32 Kbytes PLQP064KB-A R5F6411FDFN -40C to 85C (version D) -40C to 85C (version D) 128 Kbytes +8 Kbyts PLQP080KB-A -40C to 85C (version D) -40C to 85C (version D) 512 Kbytes +8 Kbytes 256 Kbytes +8 Kbytes -20C to 85C (version N) -20C to 85C (version N) 63 Kbytes R5F6411FNLG R5F6411FDLG -20C to 85C (version N) 384 Kbytes +8 Kbytes (P) -40C to 85C (version D) -40C to 85C (version D) 512 Kbytes +8 Kbytes R5F64111NLG -20C to 85C (version N) -20C to 85C (version N) 256 Kbytes +8 Kbytes R5F64116DFB R5F64111DLG 63 Kbytes PLQP0100KB-A R5F64115DFB R5F64116NFB -40C to 85C (version D) 512 Kbytes +8 Kbytes R5F64114DFB Remarks -20C to 85C (version N) 256 Kbytes +8 Kbyts R5F64110DFB R5F64111NFB As of September, 2009 -40C to 85C (version D) -20C to 85C (version N) -40C to 85C (version D) R32C/111 Group 1. Overview Part Number R5 F 64 11 6 N XXX FB Package Code FB : PLQP0100KB-A FP : PLQP0080KB-A FN : PLQP0064KB-A LG : PTLG0100KA-A ROM Number Omitted in the flash memory version Temperature Code N : -20C to 85C D : -40C to 85C ROM/RAM Capacity 0 : 256 KB/63 KB 1 : 384 KB/63 KB 2 : 512 KB/63 KB 4 : 256 KB/40 KB 5 : 384 KB/40 KB 6 : 512 KB/40 KB E : 128 KB/32 KB F : 256 KB/32 KB R32C/111 Group R32C/100 Series Memory Type F : Flash memory version Figure 1.1 Part Numbering of Product REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 9 of 99 R32C/111 Group 1.3 1. Overview Block Diagram Figure 1.2 to Figure 1.4 show block diagram of the R32C/111 Group. 8 8 8 8 8 8 8 Port P0 Port P1 Port P2 Port P3 Port P4 Port P5 Port P6 16 bits x 5 timers 16 bits x 6 timers Three-phase motor controller A/D converter: Clock generator: 10 bits x 1 circuit Standard: 10 inputs Maximum: 26 inputs 4 circuits - XIN-XOUT - XCIN-XCOUT - On-chip oscillator - PLL frequency synthesizer D/A converter: 8 bits x 2 channels VCC1 DMAC 9 channels Watchdog timer: DMAC II 15 bits X-Y converter: CRC calculator (CCITT) X16 + X12 + X5 + 1 ROM Multiplier Floating-point unit Note: 1. IEBus is a trademark of NEC Electronics Corporation. Figure 1.2 R32C/111 Group Block Diagram for the 100-pin Package REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 10 of 99 8 RAM 5 FLG INTB ISP USP PC SVF SVP VCT Memory Port P10 Time measurement: 16 Wave generation: 19 Serial interface: - Variable-length synchronous serial I/O - IEBus (1) R2R0 R2R0 R3R1 R3R1 R6R4 R6R4 R7R5 R7R5 A0 A0 A1 A1 A2 A2 A3 A3 FB FB SB SB Port P9 Intelligent I/O R32C/100 Series CPU Core P9_1 16 bits x 16 bits P8_5 Serial interface: 7 Timer: Timer A Timer B 8 Peripheral functions Port P8 VCC1 Port P7 VCC2 R32C/111 Group 1. Overview 8 8 8 8 8 8 Port P0 Port P1 Port P2 Port P3 Port P6 Port P7 Timer: 16 bits x 5 timers 16 bits x 6 timers Three-phase motor controller A/D converter: Clock generator: 10 bits x 1 circuit Standard: 10 inputs Maximum: 26 inputs 4 circuits - XIN-XOUT - XCIN-XCOUT - On-chip oscillator - PLL frequency synthesizer P8_5 D/A converter: X-Y converter: 8 bits x 1 channel DMAC 16 bits x 16 bits 7 Timer A Timer B Port P8 Peripheral functions Watchdog timer: Serial interface: DMAC II 15 bits 7 channels X +X +X +1 Intelligent I/O Time measurement: 16 Wave generation: 19 Serial interface: - Variable-length synchronous serial I/O - IEBus (1) Memory R32C/100 Series CPU Core R2R0 R2R0 R3R1 R3R1 R6R4 R6R4 R7R5 R7R5 A0 A0 A1 A1 A2 A2 A3 A3 FB FB SB SB ROM FLG INTB ISP USP PC SVF SVP VCT RAM Multiplier Floating-point unit Note: 1. IEBus is a trademark of NEC Electronics Corporation. Figure 1.3 R32C/111 Group Block Diagram for the 80-pin Package REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 11 of 99 8 5 4 12 Port P10 16 Port P9 CRC calculator (CCITT) R32C/111 Group 1. Overview 4 3 8 4 8 8 Port P0 Port P1 Port P2 Port P3 Port P6 Port P7 Timer: 16 bits x 5 timers 16 bits x 6 timers Three-phase motor controller A/D converter: Clock generator: 10 bits x 1 circuit Standard: 8 inputs Maximum: 20 inputs 4 circuits - XIN-XOUT - XCIN-XCOUT - On-chip oscillator - PLL frequency synthesizer P8_5 D/A converter: X-Y converter: 8 bits x 1 channel DMAC 16 bits x 16 bits 7 Timer A Timer B Port P8 Peripheral functions Watchdog timer: Serial interface: DMAC II 15 bits 6 channels 16 12 5 X +X +X +1 Intelligent I/O ROM FLG INTB ISP USP PC SVF SVP VCT RAM Multiplier Floating-point unit Note: 1. IEBus is a trademark of NEC Electronics Corporation. Figure 1.4 R32C/111 Group Block Diagram for the 64-pin Package REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 12 of 99 8 R2R0 R2R0 R3R1 R3R1 R6R4 R6R4 R7R5 R7R5 A0 A0 A1 A1 A2 A2 A3 A3 FB FB SB SB Port P10 Time measurement: 16 Wave generation: 19 Serial interface: - Variable-length synchronous serial I/O - IEBus (1) Memory R32C/100 Series CPU Core P9_3 CRC calculator (CCITT) R32C/111 Group 1.4 1. Overview Pin Assignments Figure 1.5 to Figure 1.8 show the pin assignments (top view) and Table 1.8 to Table 1.14 show the pin characteristics. 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 76 50 77 49 VCC2 78 48 79 47 80 46 81 45 82 44 83 43 84 42 R32C/111 GROUP 85 86 41 40 87 39 88 38 PLQP0100KB-A (100P6Q-A) (Top view) 89 90 91 92 93 37 36 35 34 33 94 32 95 31 96 30 97 29 98 28 VCC1 99 27 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 26 P4_2 / A18 / RXD3 / SCL3 / STXD3 / ISRXD2 / IEIN P4_3 / A19 / TXD3 / SDA3 / SRXD3 / OUTC2_0 / ISTXD2 / IEOUT P4_4 / CS3 / A20 / CTS6 / RTS6 / SS6 P4_5 / CS2 / A21 / CLK6 P4_6 / CS1 / A22 / RXD6 / SCL6 / STXD6 P4_7 / CS0 / A23 / TXD6 / SDA6 / SRXD6 P5_0 / WR0 / WR P5_1 / WR1 / BC1 P5_2 / RD R5_3 / CLKOUT / BCLK P5_4 / HLDA / CS1 / TXD7 P5_5 / HOLD / CLK7 P5_6 / ALE / CS2 / RXD7 P5_7 / RDY / CS3 / CTS7 / RTS7 P6_0 / TB0IN / CTS0 / RTS0 / SS0 P6_1 / TB1IN / CLK0 P6_2 / TB2IN / RXD0 / SCL0 / STXD0 P6_3 / TXD0 / SDA0 / SRXD0 P6_4 / CTS1 / RTS1 / SS1 / OUTC2_1 / ISCLK2 P6_5 / CLK1 P6_6 / RXD1 / SCL1 / STXD1 P6_7 / TXD1 / SDA1 / SRXD1 P7_0 / TA0OUT / TXD2 / SDA2 / SRXD2 / IIO1_6 / OUTC2_0 / ISTXD2 / IEOUT (Note 2) P7_1 / TB5IN / TA0IN / RXD2 / SCL2 / STXD2 / IIO1_7 / OUTC2_2 / ISRXD2 / IEIN (Note 2) P7_2 / TA1OUT / V / CLK2 SS4 / RTS4 / CTS4 / TB4IN / DA1 / P9_4 TB3IN / DA0 / P9_3 VDC0 P9_1 VDC1 NSD CNVSS XCIN / P8_7 XCOUT / P8_6 RESET XOUT VSS XIN VCC1 NMI / P8_5 INT2 / P8_4 INT1 / P8_3 INT0 / P8_2 UD0B / UD1B / IIO1_5 / RTS5 / CTS5 / SS5 / U / TA4IN / P8_1 UD0A / UD1A / RXD5 / SCL5 / STXD5 / U / TA4OUT / P8_0 UD0B / UD1B / IIO1_4 / CLK5 / TA3IN / P7_7 UD0A / UD1A / IIO1_3 / RTS8 / CTS8 / TXD5 / SDA5 / SRXD5 / TA3OUT / P7_6 IIO1_2 / RXD8 / W / TA2IN / P7_5 IIO1_1 / CLK8 / W / TA2OUT / P7_4 IIO1_0 / TXD8 / SS2 / RTS2 / CTS2 / V / TA1IN / P7_3 (Note 3) 2 100 1 IIO0_2 / IIO1_2 / D10 / P1_2 IIO0_1 / IIO1_1 / D9 / P1_1 IIO0_0 / IIO1_0 / D8 / P1_0 AN0_7 / D7 / P0_7 AN0_6 / D6 / P0_6 AN0_5 / D5 / P0_5 AN0_4 / D4 / P0_4 AN0_3 / D3 / P0_3 AN0_2 / D2 / P0_2 AN0_1 / D1 / P0_1 AN0_0 / D0 / P0_0 KI3 / AN_7 / P10_7 KI2 / AN_6 / P10_6 KI1 / AN_5 / P10_5 KI0 / AN_4 / P10_4 AN_3 / P10_3 AN_2 / P10_2 AN_1 / P10_1 AVSS AN_0 / P10_0 VREF AVCC STXD4 / SCL4 / RXD4 / ADTRG / P9_7 SRXD4 / SDA4 / TXD4 / ANEX1 / P9_6 CLK4 / ANEX0 / P9_5 74 75 P1_3 / D11 / IIO0_3 / IIO1_3 P1_4 / D12 / IIO0_4 / IIO1_4 P1_5 / D13 / INT3 / IIO0_5 / IIO1_5 P1_6 / D14 / INT4 / IIO0_6 / IIO1_6 P1_7 / D15 / INT5 / IIO0_7 / IIO1_7 P2_0 / A0 / [A0/D0] / BC0 / [BC0/D0] / AN2_0 P2_1 / A1 / [A1/D1] / AN2_1 P2_2 / A2 / [A2/D2] / AN2_2 P2_3 / A3 / [A3/D3] / AN2_3 P2_4 / A4 / [A4/D4] / AN2_4 P2_5 / A5 / [A5/D5] / AN2_5 P2_6 / A6 / [A6/D6] / AN2_6 P2_7 / A7 / [A7/D7] / AN2_7 VSS P3_0 / A8 / [A8/D8] / TA0OUT / UD0A / UD1A VCC2 P3_1 / A9 / [A9/D9] / TA3OUT / UD0B / UD1B P3_2 / A10 / [A10/D10] / TA1OUT / V P3_3 / A11 / [A11/D11] / TA1IN / V P3_4 / A12 / [A12/D12] / TA2OUT / W P3_5 / A13 / [A13/D13] / TA2IN / W P3_6 / A14 / [A14/D14] / TA4OUT / U P3_7 / A15 / [A15/D15] / TA4IN / U P4_0 / A16 / CTS3 / RTS3 / SS3 P4_1 / A17 / CLK3 (Note 1) Notes: 1. Pin names in brackets [ ] represent a functional signal as a whole and should not be considered as two separate pins. 2. Pins P7_0 and P7_1 are open drain outputs. 3. The position of pin number 1 varies by product. Refer to the index mark attached "Package Dimensions". Figure 1.5 Pin Assignment for the 100-pin Package (top view) REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 13 of 99 R32C/111 Group 1. Overview R32C/111 GROUP PTLG0100KA-A (100F0M) (Top view) VCC1 VCC2 10 9 8 7 6 5 4 3 2 1 K P4_2 P4_3 P5_0 P5_1 P5_4 P6_0 P6_3 P6_6 P7_1 (Note 1) P7_2 K J P4_1 P4_0 P4_6 P5_2 P5_5 P6_1 P6_4 P7_0 (Note 1) P7_3 P7_4 J H P3_6 P3_7 P4_5 P5_3 P5_6 P6_2 P6_7 P7_5 P7_7 P8_0 H G P3_2 P3_3 P4_4 P4_7 P5_7 P6_5 P7_6 P8_3 / INT1 P8_5 / NMI P8_2 / INT0 G F P3_0 VCC2 P3_1 P3_4 P3_5 P8_4 / INT2 P8_1 VSS XIN VCC1 F E P2_6 P2_7 VSS P2_5 P1_6 / INT4 P0_0 P9_3 P8_6 / XCOUT RESET XOUT E D P2_2 P2_1 P2_3 P2_4 P0_5 P10_7 P10_0 P9_1 CNVSS P8_7 / XCIN D C P2_0 P1_7 / INT5 P1_1 P1_0 P0_1 P10_3 AVSS P9_7 VDC1 NSD C B P1_4 P1_5 / INT3 P0_6 P0_4 P0_2 P10_5 P10_2 AVCC P9_6 VDC0 B A P1_3 P1_2 P0_7 P0_3 P10_6 P10_4 P10_1 VREF P9_5 P9_4 A 10 9 8 7 6 5 4 3 2 1 VCC2 VCC1 Notes: 1. P7_0 and P7_1 as output are open drain outputs. 2. The pin position A1 varies by product. Refer to the index mark attached "Package Dimensions". Figure 1.6 Pin Assignment for the 100-pin LGA Package (top view) REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 14 of 99 (Note 2) R32C/111 Group Table 1.8 1. Overview Pin Characteristics for the 100-pin Package (1/3) Pin No. Control Pin QFP LGA Port Interrupt Pin Timer Pin 1 A1 P9_4 TB4IN 2 E4 P9_3 TB3IN 3 B1 4 D3 5 C2 VDC1 6 C1 NSD 7 D2 CNVSS 8 D1 XCIN 9 E3 XCOUT P8_6 10 E2 RESET 11 E1 XOUT 12 F3 VSS 13 F2 XIN 14 F1 VCC1 15 G2 UART Pin Intelligent I/O Pin CTS4/RTS4/SS4 Analog Pin Bus Control Pin DA1 DA0 VDC0 P9_1 P8_7 P8_5 NMI 16 F5 P8_4 INT2 17 G3 P8_3 INT1 18 G1 P8_2 INT0 19 F4 P8_1 20 H1 P8_0 TA4OUT/U RXD5/SCL5/STXD5 UD0A/UD1A 21 H2 P7_7 TA3IN CLK5 22 G4 P7_6 TA3OUT TXD5/SDA5/ IIO1_3/UD0A/UD1A SRXD5/CTS8/RTS8 23 H3 P7_5 TA2IN/W RXD8 IIO1_2 24 J1 P7_4 TA2OUT/W CLK8 IIO1_1 25 J2 P7_3 TA1IN/V 26 K1 P7_2 TA1OUT/V CLK2 27 K2 P7_1 TB5IN/ TA0IN RXD2/SCL2/STXD2 IIO1_7/OUTC2_2/ ISRXD2/IEIN 28 J3 P7_0 TA0OUT TXD2/SDA2/SRXD2 IIO1_6/OUTC2_0/ ISTXD2/IEOUT 29 H4 P6_7 TXD1/SDA1/SRXD1 30 K3 P6_6 RXD1/SCL1/STXD1 31 G5 P6_5 CLK1 TA4IN/U CTS5/RTS5/SS5 CTS2/RTS2/SS2/ TXD8 32 J4 P6_4 CTS1/RTS1/SS1 33 K4 P6_3 TXD0/SDA0/SRXD0 34 H5 P6_2 TB2IN RXD0/SCL0/STXD0 35 J5 P6_1 TB1IN CLK0 TB0IN IIO1_5/UD0B/UD1B IIO1_4/UD0B/UD1B IIO1_0 OUTC2_1/ISCLK2 CTS0/RTS0/SS0 36 K5 P6_0 37 G6 P5_7 CTS7/RTS7 RDY/CS3 38 H6 P5_6 RXD7 ALE/CS2 39 J6 P5_5 CLK7 HOLD REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 15 of 99 R32C/111 Group Table 1.9 1. Overview Pin Characteristics for the 100-pin Package (2/3) Pin No. Control Pin QFP LGA Port Interrupt Pin Timer Pin UART Pin Intelligent I/O Pin Analog Pin Bus Control Pin HLDA/CS1 40 K6 P5_4 TXD7 41 H7 P5_3 CLKOUT/ BCLK 42 J7 P5_2 RD 43 K7 P5_1 WR1/BC1 44 K8 P5_0 WR0/WR 45 G7 P4_7 TXD6/SDA6/SRXD6 CS0/A23 46 J8 P4_6 RXD6/SCL6/STXD6 CS1/A22 47 H8 P4_5 CLK6 CS2/A21 48 G8 P4_4 CTS6/RTS6/SS6 CS3/A20 49 K9 P4_3 TXD3/SDA3/SRXD3 OUTC2_0/ISTXD2/ IEOUT A19 50 K10 P4_2 RXD3/SCL3/STXD3 ISRXD2/IEIN A18 51 J10 P4_1 CLK3 A17 52 J9 P4_0 CTS3/RTS3/SS3 A16 53 H9 P3_7 TA4IN/U A15(/D15) 54 H10 P3_6 TA4OUT/U A14(/D14) 55 F6 P3_5 TA2IN/W A13(/D13) 56 F7 P3_4 TA2OUT/W A12(/D12) 57 G9 P3_3 TA1IN/V A11(/D11) 58 G10 P3_2 TA1OUT/V A10(/D10) 59 F8 P3_1 TA3OUT UD0B/UD1B A9(/D9) 60 F9 P3_0 TA0OUT UD0A/UD1A A8(/D8) VCC2 61 F10 62 E8 63 E9 P2_7 AN2_7 A7(/D7) 64 E10 P2_6 AN2_6 A6(/D6) 65 E7 P2_5 AN2_5 A5(/D5) 66 D7 P2_4 AN2_4 A4(/D4) 67 D8 P2_3 AN2_3 A3(/D3) 68 D10 P2_2 AN2_2 A2(/D2) 69 D9 P2_1 AN2_1 A1(/D1) 70 C10 P2_0 AN2_0 A0(/D0)/ BC0(/D0) 71 C9 P1_7 VSS INT5 IIO0_7/IIO1_7 D15 72 E6 P1_6 INT4 IIO0_6/IIO1_6 D14 73 B9 P1_5 INT3 IIO0_5/IIO1_5 D13 74 B10 P1_4 IIO0_4/IIO1_4 D12 75 A10 P1_3 IIO0_3/IIO1_3 D11 76 A9 P1_2 IIO0_2/IIO1_2 D10 77 C8 P1_1 IIO0_1/IIO1_1 D9 78 C7 P1_0 IIO0_0/IIO1_0 D8 79 A8 P0_7 REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 16 of 99 AN0_7 D7 R32C/111 Group Table 1.10 1. Overview Pin Characteristics for the 100-pin Package (3/3) Pin No. Control Pin QFP LGA Port Interrupt Pin Timer Pin UART Pin Intelligent I/O Pin Analog Pin Bus Control Pin 80 B8 P0_6 AN0_6 D6 81 D6 P0_5 AN0_5 D5 82 B7 P0_4 AN0_4 D4 83 A7 P0_3 AN0_3 D3 84 B6 P0_2 AN0_2 D2 85 C6 P0_1 AN0_1 D1 86 E5 P0_0 AN0_0 D0 87 D5 P10_7 KI3 AN_7 88 A6 P10_6 KI2 AN_6 89 B5 P10_5 KI1 AN_5 90 A5 P10_4 KI0 AN_4 91 C5 P10_3 AN_3 92 B4 P10_2 AN_2 93 A4 P10_1 AN_1 94 C4 P10_0 AN_0 AVSS 95 D4 96 A3 VREF 97 B3 AVCC 98 C3 P9_7 RXD4/SCL4/STXD4 99 B2 P9_6 TXD4/SDA4/SRXD4 ANEX1 100 A2 P9_5 CLK4 ANEX0 REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 17 of 99 ADTRG 1. Overview 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 40 62 39 63 38 64 37 65 36 66 35 67 34 R32C/111 GROUP 68 69 33 32 70 31 71 30 PLQP0080KB-A (80P6Q-A) (Top view) 72 73 74 75 29 28 27 26 P7_3 / TA1IN / V / CTS2 / RTS2 / SS2 / TXD8 / IIO1_0 P7_4 / TA2OUT / W / CLK8 / IIO1_1 P7_5 / TA2IN / W / RXD8 / IIO1_2 P7_6 / TA3OUT / TXD5 / SDA5 / SRXD5 / RTS8 / CTS8 / IIO1_3 / UD0A / UD1A 20 19 18 17 16 15 14 13 12 11 9 10 P6_3 / TXD0 / SDA0 / SRXD0 P3_0 / TA0OUT / UD0A / UD1A / CLK3 P3_1 / TA3OUT / UD0B / UD1B / RXD3 / SCL3 / STXD3 P3_2 / TA1OUT / V / TXD3 / SDA3 / SRXD3 P3_3 / TA1IN / V / CTS3 / RTS3 / SS3 P3_4 / TA2OUT / W P3_5 / TA2IN / W P3_6 / TA4OUT / U P3_7 / TA4IN / U P6_4 / CTS1 / RTS1 / SS1 / OUTC2_1 / ISCLK2 P6_5 / CLK1 P6_6 / RXD1 / SCL1 / STXD1 P6_7 / TXD1 / SDA1 / SRXD1 P7_0 / TA0OUT / TXD2 / SDA2 / SRXD2 / IIO1_6 / OUTC2_0 / ISTXD2 / IEOUT (Note 1) P7_1 / TB5IN / TA0IN / RXD2 / SCL2 / STXD2 / IIO1_7 / OUTC2_2 / ISRXD2 / IEIN (Note 1) P7_2 / TA1OUT / V / CLK2 CLK4 / ANEX0 / P9_5 TB3IN / DA0 / P9_3 VDC0 VDC1 NSD CNVSS XCIN / P8_7 XCOUT / P8_6 RESET XOUT VSS XIN VCC1 NMI / P8_5 INT2 / P8_4 INT1 / P8_3 INT0 / P8_2 UD0B / UD1B / IIO1_5 / RTS5 / CTS5 / SS5 / U / TA4IN / P8_1 UD0A / UD1A / RXD5 / SCL5 / STXD5 / U / TA4OUT / P8_0 UD0B / UD1B / IIO1_4 / CLK5 / TA3IN / P7_7 8 21 7 80 (Note 2) 6 22 5 23 79 4 24 78 3 25 77 2 76 1 AN0_6 / P0_6 AN0_5 / P0_5 AN0_4 / P0_4 AN0_3 / P0_3 AN0_2 / P0_2 AN0_1 / P0_1 AN0_0 / P0_0 KI3 / AN_7 / P10_7 KI2 / AN_6 / P10_6 KI1 / AN_5 / P10_5 KI0 / AN_4 / P10_4 AN_3 / P10_3 AN_2 / P10_2 AN_1 / P10_1 AVSS AN_0 / P10_0 VREF AVCC STXD4 / SCL4 / RXD4 / ADTRG / P9_7 SRXD4 / SDA4 / TXD4 / ANEX1 / P9_6 59 60 P0_7 / AN0_7 P1_0 / IIO0_0 / IIO1_0 P1_1 / IIO0_1 / IIO1_1 P1_2 / IIO0_2 / IIO1_2 P1_3 / IIO0_3 / IIO1_3 P1_4 / IIO0_4 / IIO1_4 P1_5 / INT3 / IIO0_5 / IIO1_5 / ADTRG P1_6 / INT4 / IIO0_6 / IIO1_6 P1_7 / INT5 / IIO0_7 / IIO1_7 P2_0 / AN2_0 / IIO0_0 P2_1 / AN2_1 / IIO0_1 P2_2 / AN2_2 / IIO0_2 P2_3 / AN2_3 / IIO0_3 P2_4 / AN2_4 / IIO0_4 P2_5 / AN2_5 / IIO0_5 P2_6 / AN2_6 / IIO0_6 P2_7 / AN2_7 / IIO0_7 P6_0 / TB0IN / CTS0 / RTS0 / SS0 P6_1 / TB1IN / CLK0 P6_2 / TB2IN / RXD0 / SCL0 / STXD0 R32C/111 Group Notes: 1. Pins P7_0 and P7_1 are open drain outputs. 2. The position of pin number 1 varies by product. Refer to the index mark attached "Package Dimensions". Figure 1.7 Pin Assignment for the 80-pin Package (top view) REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 18 of 99 R32C/111 Group Table 1.11 1. Overview Pin Characteristics for the 80-pin Package (1/2) Pin No. Control Pin Port 1 P9_5 2 P9_3 3 VDC0 4 VDC1 5 NSD 6 CNVSS 7 XCIN P8_7 8 XCOUT P8_6 9 RESET 10 XOUT 11 VSS 12 XIN 13 VCC1 Interrupt Pin Timer Pin UART Pin Intelligent I/O Pin CLK4 ANEX0 TB3IN DA0 14 P8_5 NMI 15 P8_4 INT2 16 P8_3 INT1 17 P8_2 INT0 18 P8_1 TA4IN/U CTS5/RTS5/SS5 IIO1_5/UD0B/UD1B 19 P8_0 TA4OUT/U RXD5/SCL5/STXD5 UD0A/UD1A 20 P7_7 TA3IN CLK5 IIO1_4/UD0B/UD1B 21 P7_6 TA3OUT TXD5/SDA5/SRXD5/ CTS8/RTS8 IIO1_3/UD0A/UD1A 22 P7_5 TA2IN/W RXD8 IIO1_2 23 P7_4 TA2OUT/W CLK8 IIO1_1 24 P7_3 TA1IN/V CTS2/RTS2/SS2/TXD8 IIO1_0 25 P7_2 TA1OUT/V CLK2 26 P7_1 TB5IN/TA0IN RXD2/SCL2/STXD2 IIO1_7/OUTC2_2/ ISRXD2/IEIN 27 P7_0 TA0OUT IIO1_6/OUTC2_0/ ISTXD2/IEOUT 28 P6_7 TXD1/SDA1/SRXD1 29 P6_6 RXD1/SCL1/STXD1 30 P6_5 CLK1 31 P6_4 CTS1/RTS1/SS1 32 P3_7 TA4IN/U 33 P3_6 TA4OUT/U 34 P3_5 TA2IN/W 35 P3_4 TA2OUT/W 36 P3_3 TA1IN/V CTS3/RTS3/SS3 37 P3_2 TA1OUT/V TXD3/SDA3/SRXD3 38 P3_1 TA3OUT RXD3/SCL3/STXD3 UD0B/UD1B 39 P3_0 TA0OUT CLK3 UD0A/UD1A 40 P6_3 REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 19 of 99 Analog Pin TXD2/SDA2/SRXD2 TXD0/SDA0/SRXD0 OUTC2_1/ISCLK2 R32C/111 Group Table 1.12 1. Overview Pin Characteristics for the 80-pin Package (2/2) Pin No. Control Pin Port Interrupt Pin Timer Pin UART Pin Intelligent I/O Pin Analog Pin 41 P6_2 TB2IN RXD0/SCL0/STXD0 42 P6_1 TB1IN CLK0 43 P6_0 TB0IN CTS0/RTS0/SS0 44 P2_7 IIO0_7 AN2_7 45 P2_6 IIO0_6 AN2_6 46 P2_5 IIO0_5 AN2_5 47 P2_4 IIO0_4 AN2_4 48 P2_3 IIO0_3 AN2_3 49 P2_2 IIO0_2 AN2_2 50 P2_1 IIO0_1 AN2_1 51 P2_0 IIO0_0 AN2_0 52 P1_7 INT5 IIO0_7/IIO1_7 53 P1_6 INT4 IIO0_6/IIO1_6 54 P1_5 INT3 IIO0_5/IIO1_5 55 P1_4 IIO0_4/IIO1_4 56 P1_3 IIO0_3/IIO1_3 57 P1_2 IIO0_2/IIO1_2 58 P1_1 IIO0_1/IIO1_1 59 P1_0 IIO0_0/IIO1_0 60 P0_7 AN0_7 61 P0_6 AN0_6 62 P0_5 AN0_5 63 P0_4 AN0_4 64 P0_3 AN0_3 65 P0_2 AN0_2 66 P0_1 AN0_1 67 P0_0 AN0_0 68 P10_7 KI3 AN_7 ADTRG 69 P10_6 KI2 AN_6 70 P10_5 KI1 AN_5 71 P10_4 KI0 AN_4 72 P10_3 AN_3 73 P10_2 AN_2 74 P10_1 AN_1 P10_0 AN_0 75 AVSS 76 77 VREF 78 AVCC 79 P9_7 RXD4/SCL4/STXD4 ADTRG 80 P9_6 TXD4/SDA4/SRXD4 ANEX1 REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 20 of 99 1. Overview 33 34 35 36 37 38 39 40 41 42 43 44 45 46 49 32 50 31 51 30 52 29 53 54 55 R32C/111 GROUP 56 28 27 26 25 57 24 PLQP0064KB-A (64P6Q-A) (Top view) 58 59 60 61 23 22 21 20 P7_3 / TA1IN / V / CTS2 / RTS2 / SS2 / TXD8 / IIO1_0 P7_4 / TA2OUT / W / CLK8 / IIO1_1 P7_5 / TA2IN / W / RXD8 / IIO1_2 P7_6 / TA3OUT / TXD5 / SDA5 / SRXD5 / RTS8 / CTS8 / IIO1_3 / UD0A / UD1A P7_7 / TA3IN / CLK5 / IIO1_4 / UD0B / UD1B 16 15 14 13 12 11 10 9 8 7 6 P3_0 / TA0OUT / UD0A / UD1A / CLK3 P3_1 / TA3OUT / UD0B / UD1B / RXD3 / SCL3 / STXD3 P3_2 / TA1OUT / V / TXD3 / SDA3 / SRXD3 P3_3 / TA1IN / V / CTS3 / RTS3 / SS3 P6_4 / CTS1 / RTS1 / SS1 / OUTC2_1 / ISCLK2 P6_5 / CLK1 P6_6 / RXD1 / SCL1 / STXD1 P6_7 / TXD1 / SDA1 / SRXD1 P7_0 / TA0OUT / TXD2 / SDA2 / SRXD2 / IIO1_6 / OUTC2_0 / ISTXD2 / IEOUT (Note 1) P7_1 / TB5IN / TA0IN / RXD2 / SCL2 / STXD2 / IIO1_7 / OUTC2_2 / ISRXD2 / IEIN (Note 1) P7_2 / TA1OUT / V / CLK2 VDC1 NSD CNVSS XCIN / P8_7 XCOUT / P8_6 RESET XOUT VSS XIN VCC1 NMI / P8_5 INT2 / P8_4 INT1 / P8_3 INT0 / P8_2 UD0B / UD1B / IIO1_5 / RTS5 / CTS5 / SS5 / U / TA4IN / P8_1 UD0A / UD1A / RXD5 / SCL5 / STXD5 / U / TA4OUT / P8_0 (Note 2) 5 17 4 18 64 3 19 63 2 62 1 AN0_2 / P0_2 AN0_1 / P0_1 AN0_0 / P0_0 KI3 / AN_7 / P10_7 KI2 / AN_6 / P10_6 KI1 / AN_5 / P10_5 KI0 / AN_4 / P10_4 AN_3 / P10_3 AN_2 / P10_2 AN_1 / P10_1 AVSS AN_0 / P10_0 VREF AVCC TB3IN / DA0 / P9_3 VDC0 47 48 P0_3 / AN0_3 P1_5 / INT3 / IIO0_5 / IIO1_5 / ADTRG P1_6 / INT4 / IIO0_6 / IIO1_6 P1_7 / INT5 / IIO0_7 / IIO1_7 P2_0 / AN2_0 / IIO0_0 P2_1 / AN2_1 / IIO0_1 P2_2 / AN2_2 / IIO0_2 P2_3 / AN2_3 / IIO0_3 P2_4 / AN2_4 / IIO0_4 P2_5 / AN2_5 / IIO0_5 P2_6 / AN2_6 / IIO0_6 P2_7 / AN2_7 / IIO0_7 P6_0 / TB0IN / CTS0 / RTS0 / SS0 P6_1 / TB1IN / CLK0 P6_2 / TB2IN / RXD0 / SCL0 / STXD0 P6_3 / TXD0 / SDA0 / SRXD0 R32C/111 Group Notes: 1. P7_0 and P7_1 are open drain outputs. 2. The position of pin number 1 varies by product. Refer to the index mark attached "Package Dimensions". Figure 1.8 Pin Assignment for the 64-pin Package (top view) REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 21 of 99 R32C/111 Group Table 1.13 1. Overview Pin Characteristics for the 64-pin Package (1/2) Pin No. Control Pin Port 1 VDC1 2 NSD 3 CNVSS 4 XCIN P8_7 5 XCOUT P8_6 6 RESET 7 XOUT 8 VSS 9 XIN 10 VCC1 Interrupt Pin Timer Pin UART Pin Intelligent I/O Pin 11 P8_5 NMI 12 P8_4 INT2 13 P8_3 INT1 14 P8_2 INT0 15 P8_1 TA4IN/U CTS5/RTS5/SS5 IIO1_5/UD0B/UD1B 16 P8_0 TA4OUT/U RXD5/SCL5/STXD5 UD0A/UD1A 17 P7_7 TA3IN CLK5 IIO1_4/UD0B/UD1B 18 P7_6 TA3OUT TXD5/SDA5/SRXD5/ CTS8/RTS8 IIO1_3/UD0A/UD1A 19 P7_5 TA2IN/W RXD8 IIO1_2 IIO1_1 20 P7_4 TA2OUT/W CLK8 21 P7_3 TA1IN/V CTS2/RTS2/SS2/TXD8 IIO1_0 22 P7_2 TA1OUT/V CLK2 23 P7_1 TB5IN/ TA0IN RXD2/SCL2/STXD2 IIO1_7/OUTC2_2/ ISRXD2/IEIN 24 P7_0 TA0OUT TXD2/SDA2/SRXD2 IIO1_6/OUTC2_0/ ISTXD2/IEOUT 25 P6_7 TXD1/SDA1/SRXD1 26 P6_6 RXD1/SCL1/STXD1 27 P6_5 CLK1 28 P6_4 CTS1/RTS1/SS1 29 P3_3 TA1IN/V 30 P3_2 TA1OUT/V TXD3/SDA3/SRXD3 31 P3_1 TA3OUT RXD3/SCL3/STXD3 UD0B/UD1B 32 P3_0 TA0OUT CLK3 UD0A/UD1A 33 P6_3 Analog Pin OUTC2_1/ISCLK2 CTS3/RTS3/SS3 TXD0/SDA0/SRXD0 34 P6_2 TB2IN RXD0/SCL0/STXD0 35 P6_1 TB1IN CLK0 36 P6_0 TB0IN CTS0/RTS0/SS0 37 P2_7 IIO0_7 AN2_7 38 P2_6 IIO0_6 AN2_6 39 P2_5 IIO0_5 AN2_5 40 P2_4 IIO0_4 AN2_4 REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 22 of 99 R32C/111 Group Table 1.14 1. Overview Pin Characteristics for the 64-pin Package (2/2) Pin No. Control Pin Port Interrupt Pin Timer Pin UART Pin Intelligent I/O Pin Analog Pin 41 P2_3 IIO0_3 AN2_3 42 P2_2 IIO0_2 AN2_2 43 P2_1 IIO0_1 AN2_1 44 P2_0 IIO0_0 AN2_0 45 P1_7 INT5 IIO0_7/IIO1_7 46 P1_6 INT4 IIO0_6/IIO1_6 47 P1_5 INT3 IIO0_5/IIO1_5 48 P0_3 AN0_3 49 P0_2 AN0_2 50 P0_1 AN0_1 51 P0_0 AN0_0 52 P10_7 KI3 AN_7 53 P10_6 KI2 AN_6 54 P10_5 KI1 AN_5 55 P10_4 KI0 AN_4 56 P10_3 AN_3 57 P10_2 AN_2 58 P10_1 AN_1 P10_0 AN_0 59 AVSS 60 61 VREF 62 AVCC 63 64 ADTRG P9_3 TB3IN VDC0 REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 23 of 99 DA0 R32C/111 Group 1.5 1. Overview Pin Definitions and Functions Table 1.15 to Table 1.21 show the pin definitions and functions. Table 1.15 Pin Definitions and Functions for the 100-pin Package (1/4) Function Symbol Power supply VCC1, VCC2, VSS Connecting pins for decoupling capacitor VDC0, VDC1 Analog power supply AVCC, AVSS Reset input I/O Power Supply I -- -- -- Description Applicable as follows: VCC1 and VCC2 = 3.0 to 5.5 V (VCC1 VCC2), VSS = 0 V A decoupling capacitor for internal voltage should be connected between VDC0 and VDC1 I VCC1 Power supply for the A/D converter. AVCC and AVSS should be connected to VCC1 and VSS, respectively RESET I VCC1 The MCU is reset when this pin is driven low CNVSS CNVSS I VCC1 This pin should be connected to VSS via a resistor Debug port NSD I/O VCC1 This pin is to communicate with a debugger. It should be connected to VCC1 via a resistor of 1 to 4.7 k I VCC1 O VCC1 I VCC1 Main clock input XIN Main clock output XOUT Input/output for the main clock oscillator. A crystal, or a ceramic resonator should be connected between pins XIN and XOUT. An external clock should be input at the XIN while leaving the XOUT open Sub clock input XCIN Sub clock output XCOUT O VCC1 BCLK output BCLK O VCC2 BCLK output Clock output CLKOUT O VCC2 Output of the clock with the same frequency as fC, f8, or f32 I VCC1 VCC2 Input for external interrupts P8_5/NMI I VCC1 Input for NMI Key input interrupt KI0 to KI3 I VCC1 Input for the key input interrupt I/O VCC2 Input/output of data (D0 to D7) while accessing an external memory space with a separate bus I/O VCC2 Input/output of data (D8 to D15) while accessing an external memory space with 16-bit separate bus O VCC2 Output of address bits A0 to A23 External interrupt INT0 to INT5 input NMI input Bus control pins D0 to D7 D8 to D15 A0 to A23 REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 24 of 99 Input/output for the sub clock oscillator. A crystal oscillator should be connected between pins XCIN and XCOUT. An external clock should be input at the XCIN while leaving the XCOUT open R32C/111 Group Table 1.16 1. Overview Pin Definitions and Functions for the 100-pin Package (2/4) Function Bus control pins Symbol I/O Power Supply Description I/O VCC2 Output of address bits (A0 to A7) and input/output of data (D0 to D7) by time-division while accessing an external memory space with multiplexed bus VCC2 Output of address bits (A8 to A15) and input/ output of data (D8 to D15) by time-division while accessing an external memory space with 16-bit multiplexed bus I/O VCC2 Output of byte control (BC0) and input/output of data (D0) by time-division while accessing an external memory space with multiplexed bus O VCC2 Chip select output A0/D0 to A7/D7 A8/D8 to A15/D15 I/O BC0/D0 CS0 to CS3 WR0/WR1/WR/ BC0/BC1/RD Output of write, byte control, and read signals. Either WRx or WR and BCx can be selected by a program. Data is read when RD is low. O VCC2 * When WR0, WR1, and RD are selected, data is written to the following address: an even address, when WR0 is low an odd address, when WR1 is low on 16-bit external data bus * When WR, BC0, BC1, and RD are selected, data is written, when WR is low and the following address is accessed: an even address, when BC0 is low an odd address, when BC1 is low on 16-bit external data bus ALE HOLD HLDA RDY O VCC2 Latch enable signal in multiplexed bus format I VCC2 The MCU is in a hold state while this pin is held low O VCC2 This pin is driven low while the MCU is held in a hold state I VCC2 Bus cycle is extended by the CPU if this pin is low on the falling edge of the BCLK REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 25 of 99 R32C/111 Group Table 1.17 1. Overview Pin Definitions and Functions for the 100-pin Package (3/4) Function I/O port Symbol Power Supply Description P0_0 to P0_7 P1_0 to P1_7 P2_0 to P2_7 P3_0 to P3_7 P4_0 to P4_7 P5_0 to P5_7 I/O VCC2 P6_0 to P6_7 P7_0 to P7_7 P8_0 to P8_4 P8_6, P8_7 P9_3 to P9_7 P10_0 to P10_7 I/O VCC1 I VCC1 Input port in CMOS. Pull-up resistors are selectable for P9_1 and P9_3 I/O VCC1 VCC2 Timers A0 to A4 input/output. TA0OUT output assigned for port P7_0 is Nchannel open drain I VCC1 VCC2 I VCC1 O VCC1 VCC2 I VCC1 VCC2 Handshake input O VCC1 VCC2 Handshake output I/O VCC1 VCC2 Transmit/receive clock input/output I VCC1 VCC2 Serial data input O VCC1 VCC2 Serial data output. TXD2 output is N-channel open drain I/O VCC1 VCC2 Serial data input/output. SDA2 output is N-channel open drain I/O VCC1 VCC2 Transmit/receive clock input/output. SCL2 output is N-channel open drain Input port P9_1 Timer A TA0OUT to TA4OUT TA0IN to TA4IN Timer B TB0IN to TB5IN Three-phase motor control timer output U,U,V,V,W,W Serial interface CTS0 to CTS8 RTS0 to RTS8 CLK0 to CLK8 RXD0 to RXD8 TXD0 to TXD8 I2C bus (simplified) I/O SDA0 to SDA6 SCL0 to SCL6 REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 26 of 99 I/O ports in CMOS. Each port can be programmed to input or output under the control of the direction register. Pull-up resistors are selected for following 4-pin units, but are enabled only for the input pins: Pi_0 to Pi_3 and Pi_4 to Pi_7 (i = 0 to 10). P7_0 and P7_1 outputs are N-channel open drain Timers A0 to A4 input Timers B0 to B5 input Three-phase motor control timer output R32C/111 Group Table 1.18 1. Overview Pin Definitions and Functions for the 100-pin Package (4/4) Function Serial interface special functions I/O Power Supply STXD0 to STXD6 O VCC1 VCC2 Serial data output in slave mode. STXD2 is N-channel open drain SRXD0 to SRXD6 I VCC1 VCC2 Serial data input in slave mode I VCC1 VCC2 Input to control serial interface special functions AN_0 to AN_7 I VCC1 Analog input for the A/D converter AN0_0 to AN0_7 AN2_0 to AN2_7 I VCC2 ADTRG I VCC1 External trigger input for the A/D converter I/O VCC1 Expanded analog input for the A/D converter and output in external op-amp connection mode ANEX1 I VCC1 Expanded analog input for the A/D converter DA0, DA1 O VCC1 Output for the D/A converter I - Reference voltage input for the A/D converter and D/A converter I/O VCC1 VCC2 Input/output for the Intelligent I/O group 0. Either input capture or output compare is selectable I/O VCC1 VCC2 Input/output for the Intelligent I/O group 1. Either input capture or output compare is selectable. IIO1_6 and IIO1_7 outputs assigned for ports P7_0 and P7_1 are N-channel open drain I VCC1 VCC2 Symbol SS0 to SS6 A/D converter ANEX0 D/A converter Reference voltage VREF input Intelligent I/O IIO0_0 to IIO0_7 IIO1_0 to IIO1_7 UD0A, UD0B, UD1A, UD1B OUTC2_0 to OUTC2_2 O ISCLK2 I/O ISRXD2 I ISTXD2 VCC1 VCC2 VCC1 VCC2 O REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 27 of 99 Output for OC (output compare) of the Intelligent I/ O group 2. OUTC2_0 and OUTC2_2 assigned for ports P7_0 and P7_1 are N-channel open drain Receive data input for the serial interface Transmit data output for the serial interface. ISTXD2 assigned for port P7_0 is N-channel open drain Receive data input for the serial interface I IEOUT Input for the two-phase encoder Clock input/output for the serial interface O IEIN Description VCC1 VCC2 Transmit data output for the serial interface. IEOUT assigned for port P7_0 is N-channel open drain R32C/111 Group Table 1.19 1. Overview Pin Definitions and Functions for the 80-/64-pin Package (1/3) Function Symbol Power supply VCC1, VSS Connecting pins for decoupling capacitor VDC0, VDC1 Analog power supply AVCC, AVSS Reset input I/O I -- Description Applicable as follows: VCC1 = 3.0 to 5.5 V, VSS = 0 V A decoupling capacitor for internal voltage should be connected between VDC0 and VDC1 I Power supply for the A/D converter. AVCC and AVSS should be connected to VCC and VSS, respectively RESET I The MCU is reset when this pin is driven low CNVSS CNVSS I This pin should be connected to VSS via a resistor Debug port NSD Main clock input XIN Main clock output XOUT Sub clock input XCIN Sub clock output XCOUT External interrupt INT0 to INT5 input I/O I O I O I This pin is to communicate with a debugger. It should be connected to VCC1 via a resistor of 1 to 4.7 k Input/output for the main clock oscillator. A crystal, or a ceramic resonator should be connected between pins XIN and XOUT. An external clock should be input at the XIN while leaving the XOUT open Input/output for the sub clock oscillator. A crystal oscillator should be connected between pins XCIN and XCOUT. An external clock should be input at the XCIN while leaving the XCOUT open Input for external interrupts P8_5/NMI I Input for NMI Key input interrupt KI0 to KI3 I Input for the key input interrupt NMI input I/O port (1) Timer A P0_0 to P0_7 P1_0 to P1_7 P2_0 to P2_7 P3_0 to P3_7 P6_0 to P6_7 P7_0 to P7_7 P8_0 to P8_4 P8_6, P8_7 P9_3, P9_5 to P9_7, P10_0 to P10_7 TA0OUT to TA4OUT I/O I/O TA0IN to TA4IN I Timer B TB0IN to TB3IN, TB5IN I Three-phase motor control timer output U,U,V,V,W,W I/O ports in CMOS. Each port can be programmed to input or output under the control of the direction register. Pull-up resistors are selected for following 4-pin units, but are enabled only for the input pins: Pi_0 to Pi_3 and Pi_4 to Pi_7 (i = 0 to 3, 6 to 10). P7_0 and P7_1 outputs are N-channel open drain Timers A0 to A4 input/output. TA0OUT output assigned for port P7_0 is N-channel open drain Timers A0 to A4 input Timers B0 to B3, and B5 input Three-phase motor control timer output O Note: 1. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 80-pin package only. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 28 of 99 R32C/111 Group Table 1.20 1. Overview Pin Definitions and Functions for the 80-/64-pin Package (2/3) Function Symbol I/O Description Serial interface (1) CTS0 to CTS3, CTS5, CTS8 I RTS0 to RTS3, RTS5, RTS8 O CLK0 to CLK5, CLK8 I/O RXD0 to RXD5, RXD8 I TXD0 to TXD5, TXD8 O Serial data output. TXD2 output is N-channel open drain I/O Serial data input/output. SDA2 output is N-channel open drain I/O Transmit/receive clock input/output. SCL2 output is N-channel open drain O Serial data output in slave mode. STXD2 is N-channel open drain I2C bus (simplified) (1) SDA0 to SDA5 SCL0 to SCL5 Handshake input Handshake output Transmit/receive clock input/output Serial data input Serial interface special functions STXD0 to STXD5 (1) SRXD0 to SRXD5 I Serial data input in slave mode SS0 to SS3, SS5 I Input to control serial interface special functions AN_0 to AN_7 AN0_0 to AN0_7 AN2_0 to AN2_7 I ADTRG I A/D converter (2) ANEX0 D/A converter Analog input for the A/D converter I/O External trigger input for the A/D converter Expanded analog input for the A/D converter and output in external op-amp connection mode ANEX1 I Expanded analog input for the A/D converter DA0 O Output for the D/A converter I Reference voltage input for the A/D converter and D/A converter Reference voltage VREF input Notes: 1. Pins CLK4, RXD4, TXD4, SDA4, SCL4, SRXD4, and STXD4 are available in the 80-pin package only. 2. Pins AN0_4 to AN0_7, ANEX0 and ANEX1 are available in the 80-pin package only. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 29 of 99 R32C/111 Group Table 1.21 1. Overview Pin Definitions and Functions for the 80-/64-pin Package (3/3) Function Intelligent I/O Symbol IIO0_0 to IIO0_7 I/O I/O Input/output for the Intelligent I/O group 0. Either input capture or output compare is selectable I/O Input/output for the Intelligent I/O group 1. Either input capture or output compare is selectable. IIO1_6 and IIO1_7 outputs assigned for ports P7_0 and P7_1 are N-channel open drain IIO1_0 to IIO1_7 UD0A, UD0B, UD1A, UD1B OUTC2_0 to OUTC2_2 Description I Input for the two-phase encoder O Output for OC (output compare) of the Intelligent I/O group 2. OUTC2_0 and OUTC2_2 assigned for ports P7_0 and P7_1 are N-channel open drain ISCLK2 I/O Clock input/output for the serial interface ISRXD2 I Receive data input for the serial interface O Transmit data output for the serial interface. ISTXD2 assigned for port P7_0 is N-channel open drain I Receive data input for the serial interface O Transmit data output for the serial interface. IEOUT assigned for port P7_0 is N-channel open drain ISTXD2 IEIN IEOUT REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 30 of 99 R32C/111 Group 2. 2. Central Processing Unit (CPU) Central Processing Unit (CPU) The CPU contains registers as shown below. There are two register banks each consisting of registers R2R0, R3R1, R6R4, R7R5, A0 to A3, SB, and FB. General purpose registers b31 R2R0 R2H R3R1 R3H b23 R6R4 R6 R7R5 R7 b15 b7 R2L R0H R3L R1H b0 R0L R1L Data registers (1) R4 R5 A0 A1 Address registers (1) A2 A3 SB Static base register (1) FB Frame base register (1) USP User stack pointer ISP Interrupt stack pointer Interrupt vector table base register INTB b31 PC Program counter FLG Flag register b24 b23 b16 b15 RND b8 b7 IPL DP FU FO Fast interrupt registers DMAC-associated registers (2) b31 b31 Blank fields represent reserved. b0 SVF Save flag register SVP Save PC register VCT Vector register b0 b23 DMD0 DMD0 DMD0 DMD0 DCT0 DCT0 DCT0 DCT0 DCR0 DCR0 DCR0 DCR0 DSA0 DSA0 DSA0 DSA0 DSR0 DSR0 DSR0 DSR0 DDA0 DDA0 DDA0 DDA0 DDR0 DDR0 DDR0 DDR0 DMA mode register DMA terminal count register DMA terminal count reload register DMA source address register DMA source address reload register DMA destination address register DMA destination address reload register Notes: 1. There are two banks of these registers. 2. There are four identical sets of DMAC-associated registers. Figure 2.1 b0 U I O B S Z D C CPU Registers REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 31 of 99 R32C/111 Group 2.1 2. Central Processing Unit (CPU) General Purpose Registers 2.1.1 Data Registers (R2R0, R3R1, R6R4, and R7R5) These 32-bit registers are primarily used for transfers and arithmetic/logic operations. Each of the registers can be divided into upper and lower 16-bit registers, e.g. R2R0 can be divided into R2 and R0, R3R0 can be divided into R3 and R1, etc. Moreover, data registers R2R0 and R3R1 can be divided into four 8-bit data registers: upper (R2H and R3H), mid-upper (R2L and R3L), mid-lower (R0H and R1H), and lower (R0L and R1L). 2.1.2 Address Registers (A0, A1, A2, and A3) These 32-bit registers have functions similar to data registers. They are also used for address register indirect addressing and address register relative addressing. 2.1.3 Static Base Register (SB) This 32-bit register is used for SB relative addressing. 2.1.4 Frame Base Register (FB) This 32-bit register is used for FB relative addressing. 2.1.5 Program Counter (PC) This 32-bit counter indicates the address of the instruction to be executed next. 2.1.6 Interrupt Vector Table Base Register (INTB) This 32-bit register indicates the start address of a relocatable vector table. 2.1.7 User Stack Pointer (USP) and Interrupt Stack Pointer (ISP) Two types of 32-bit stack pointers (SPs) are provided: user stack pointer (USP) and interrupt stack pointer (ISP). Use the stack pointer select flag (U flag) to select either the user stack pointer (USP) or the interrupt stack pointer (ISP). The U flag is bit 7 in the flag register (FLG). Refer to 2.1.8 "Flag Register (FLG)" for details. To minimize the overhead of interrupt sequence due to less memory access, set the user stack pointer (USP) or the interrupt stack pointer (ISP) to a multiple of 4. 2.1.8 Flag Register (FLG) This 32-bit register indicates the CPU status. 2.1.8.1 Carry Flag (C flag) This flag becomes 1 when any of the carry, borrow, shifted-out bit, etc. is generated in the arithmetic logic unit (ALU). 2.1.8.2 Debug Flag (D flag) This flag is only for debugging. Only set this bit to 0. 2.1.8.3 Zero Flag (Z flag) This flag becomes 1 when the result of an operation is 0; otherwise it is 0. 2.1.8.4 Sign Flag (S flag) This flag becomes 1 when the result of an operation is a negative value; otherwise it is 0. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 32 of 99 R32C/111 Group 2.1.8.5 2. Central Processing Unit (CPU) Register Bank Select Flag (B flag) This flag selects a register bank. It indicates 0 when the register bank 0 is selected, and 1 when the register bank 1 is selected. 2.1.8.6 Overflow Flag (O flag) This flag becomes 1 if an overflow occurs in an operation; otherwise it is 0. 2.1.8.7 Interrupt Enable Flag (I flag) This flag enables maskable interrupts. To disable maskable interrupts, set this flag to 0. To enable them, set this flag to 1. When an interrupt is accepted, the flag becomes 0. 2.1.8.8 Stack Pointer Select Flag (U flag) To select the interrupt stack pointer (ISP), set this flag to 0. To select the user stack pointer (USP), set this flag to 1. It becomes 0 when a hardware interrupts is accepted or when an INT instruction designated by a software interrupt number from 0 to 127 is executed. 2.1.8.9 Floating-point Underflow Flag (FU flag) This flag becomes 1 when an underflow occurs in a floating-point operation; otherwise it is 0. It also becomes 1 when the operand has invalid numbers (subnormal numbers). 2.1.8.10 Floating-point Overflow Flag (FO flag) This flag becomes 1 when an overflow occurs in a floating-point operation; otherwise it is 0. It also becomes 1 when the operand has invalid numbers (subnormal numbers). 2.1.8.11 Processor Interrupt Priority Level (IPL) The processor interrupt priority level (IPL), consisting of three bits, selects a processor interrupt priority level from level 0 to 7. An interrupt is acceptable when the interrupt request level is higher than the selected IPL. When the processor interrupt priority level (IPL) is set to 111b (level 7), all interrupts are disabled. 2.1.8.12 Fixed-point Radix Point Designation Bit (DP bit) This bit designates the radix point. It also specifies which portion of the fixed-point multiplication result to take. It is used in the MULX instruction. 2.1.8.13 Floating-point Rounding Mode (RND) The 2-bit floating-point rounding mode selects a rounding mode for floating-point calculation results. 2.1.8.14 Reserved Only set this bit to 0. The read value is undefined. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 33 of 99 R32C/111 Group 2.2 2. Central Processing Unit (CPU) Fast Interrupt Registers The following three registers are provided to minimize the overhead of interrupt sequence. 2.2.1 Save Flag Register (SVF) This 32-bit register is used to save the flag register when a fast interrupt is generated. 2.2.2 Save PC Register (SVP) This 32-bit register is used to save the program counter when a fast interrupt is generated. 2.2.3 Vector Register (VCT) This 32-bit register is used to indicate a jump address when a fast interrupt is generated. 2.3 DMAC-associated Registers There are seven types of DMAC-associated registers. 2.3.1 DMA Mode Registers (DMD0, DMD1, DMD2, and DMD3) These 32-bit registers are used to set DMA transfer mode, bit rate etc. 2.3.2 DMA Terminal Count Registers (DCT0, DCT1, DCT2, and DCT3) These 24-bit registers are used to set DMA transfer counting. 2.3.3 DMA Terminal Count Reload Registers (DCR0, DCR1, DCR2, and DCR3) These 24-bit registers are used to set the reloaded values for DMA terminal count registers. 2.3.4 DMA Source Address Registers (DSA0, DSA1, DSA2, and DSA3) These 32-bit registers are used to set DMA source addresses. 2.3.5 DMA Source Address Reload Registers (DSR0, DSR1, DSR2, and DSR3) These 32-bit registers are used to set the reloaded value for DMA source address register. 2.3.6 DMA Destination Address Registers (DDA0, DDA1, DDA2, and DDA3) These 32-bit registers are used to set DMA destination address. 2.3.7 DMA Destination Address Reload Registers (DDR0, DDR1, DDR2, and DDR3) These 32-bit registers are used to set reloaded values for DMA destination address registers. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 34 of 99 R32C/111 Group 3. 3. Memory Memory Figure 3.1 shows the memory map of the R32C/111 Group. The R32C/111 Group provides a 4-Gbyte address space from 00000000h to FFFFFFFFh. The internal ROM is mapped to the end of the memory map with the ending address fixed at FFFFFFFFh. Therefore, the 512-Kbyte internal ROM is mapped from FFF80000h to FFFFFFFFh. The fixed interrupt vector table which contains each start address of interrupt handlers is mapped from FFFFFFDCh to FFFFFFFFh. The internal RAM is mapped to the beginning of the memory map with the starting address fixed at 00000400h. Therefore, the 63-Kbyte internal RAM is mapped from 00000400h to 0000FFFFh. Besides being used for data storage, the internal RAM functions as a stack(s) for subroutines and/or interrupt handlers. Special Function Registers (SFRs), which are control registers for peripheral functions, are mapped from 00000000h to 000003FFh, and from 00040000h to 0004FFFFh. Unoccupied SFR locations are reserved. No access is allowed. In memory expansion mode or microprocessor mode, some spaces are reserved for internal use and should not be accessed. 00000000h SFR1 00000400h Internal RAM Internal RAM XXXXXXXXh Capacity XXXXXXXXh 32 Kbytes 00008400h Reserved 40 Kbytes 0000A400h 00040000h SFR2 63 Kbytes 00010000h 00050000h Reserved 00060000h Internal ROM (Data space) (1) 00062000h Reserved Internal ROM Capacity YYYYYYYYh 128 Kbytes FFFE0000h 256 Kbytes FFFC0000h 384 Kbytes FFFA0000h 512 Kbytes FFF80000h 00080000h External space (2) FFE00000h Reserved (3) YYYYYYYYh Internal ROM (4) FFFFFFFFh FFFFFFDCh Undefined instruction Overflow BRK instruction Reserved Reserved Watchdog timer (5) Reserved NMI Reset FFFFFFFFh Notes: 1. Additional two 4-Kbyte spaces (blocks A and B) for storing data are provided in the flash memory version. 2. This space can be used in memory expansion mode or microprocessor mode. Addresses from 02000000h to FDFFFFFFh are inaccessible. 3. This space is reserved in memory expansion mode. It becomes external space in microprocessor mode. 4. This space can be used in single-chip mode or memory expansion mode. It becomes external space in microprocessor mode. 5. The watchdog timer interrupt shares the vector table with the oscillator stop detection interrupt and low voltage detection interrupt. Figure 3.1 Memory Map REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 35 of 99 R32C/111 Group 4. 4. Special Function Registers (SFRs) Special Function Registers (SFRs) SFRs are memory-mapped peripheral registers that control the operation of peripherals. Table 4.1 SFR List (1) to Table 4.24 SFR List (24) list the SFR details. Table 4.1 SFR List (1) Address Register 000000h 000001h 000002h 000003h 000004h Clock Control Register 000005h 000006h Flash Memory Control Register 000007h Protect Release Register 000008h 000009h 00000Ah 00000Bh 00000Ch 00000Dh 00000Eh 00000Fh 000010h External Bus Control Register 3/Flash Memory Rewrite Bus 000011h Control Register 3 000012h Chip Selects 2 and 3 Boundary Setting Register 000013h 000014h External Bus Control Register 2 000015h 000016h Chip Selects 1 and 2 Boundary Setting Register 000017h 000018h External Bus Control Register 1 000019h 00001Ah Chip selects 0 and 1 Boundary Setting Register 00001Bh 00001Ch External Bus Control Register 0/Flash Memory Rewrite Bus 00001Dh Control Register 0 00001Eh Peripheral Bus Control Register 00001Fh 000020h to 00005Fh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 36 of 99 Symbol Reset Value CCR 0001 1000b FMCR PRR 0000 0001b 00h EBC3/FEBC3 0000h CB23 00h EBC2 0000h CB12 00h EBC1 0000h CB01 00h EBC0/FEBC0 0000h PBC 0504h R32C/111 Group Table 4.2 Address 000060h 000061h 000062h 000063h 000064h 000065h 000066h 000067h 000068h 000069h 00006Ah 00006Bh 00006Ch 00006Dh 00006Eh 00006Fh 000070h 000071h 000072h 000073h 000074h 000075h 000076h 000077h 000078h 000079h 00007Ah 00007Bh 00007Ch 00007Dh 00007Eh 00007Fh 000080h 000081h 000082h 000083h 000084h 000085h 000086h 000087h 4. Special Function Registers (SFRs) SFR List (2) Register Symbol Reset Value Timer B5 Interrupt Control Register UART5 Transmit/NACK Interrupt Control Register UART2 Receive/ACK Interrupt Control Register UART6 Transmit/NACK Interrupt Control Register UART3 Receive/ACK Interrupt Control Register UART5/6 Bus Collision, Start Condition/Stop Condition Detection Interrupt Control Register UART4 Receive/ACK Interrupt Control Register DMA0 Transfer Complete Interrupt Control Register UART0/3 Bus Collision, Start Condition/Stop Condition Detection Interrupt Control Register DMA2 Transfer Complete Interrupt Control Register A/D Converter 0 Convert Completion Interrupt Control Register Timer A0 Interrupt Control Register Intelligent I/O Interrupt Control Register 0 Timer A2 Interrupt Control Register Intelligent I/O Interrupt Control Register 2 Timer A4 Interrupt Control Register Intelligent I/O Interrupt Control Register 4 UART0 Receive/ACK Interrupt Control Register Intelligent I/O Interrupt Control Register 6 UART1 Receive/ACK Interrupt Control Register Intelligent I/O Interrupt Control Register 8 Timer B1 Interrupt Control Register Intelligent I/O Interrupt Control Register 10 Timer B3 Interrupt Control Register TB5IC S5TIC S2RIC S6TIC S3RIC BCN5IC/BCN6IC XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b S4RIC DM0IC BCN0IC/BCN3IC XXXX X000b XXXX X000b XXXX X000b DM2IC AD0IC TA0IC IIO0IC TA2IC IIO2IC TA4IC IIO4IC S0RIC IIO6IC S1RIC IIO8IC TB1IC IIO10IC TB3IC XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b INT5 Interrupt Control Register INT5IC XX00 X000b INT3 Interrupt Control Register INT3IC XX00 X000b INT1 Interrupt Control Register INT1IC XX00 X000b UART2 Transmit/NACK Interrupt Control Register UART5 Receive/ACK Interrupt Control Register UART3 Transmit/NACK Interrupt Control Register UART6 Receive/ACK Interrupt Control Register UART4 Transmit/NACK Interrupt Control Register S2TIC S5RIC S3TIC S6RIC S4TIC XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b UART2 Bus Collision, Start Condition/Stop Condition Detection BCN2IC Interrupt Control Register X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 37 of 99 XXXX X000b R32C/111 Group Table 4.3 4. Special Function Registers (SFRs) SFR List (3) Address Register 000088h DMA1 Transfer Complete Interrupt Control Register 000089h UART1/4 Bus Collision, Start Condition/Stop Condition Detection Interrupt Control Register 00008Ah DMA3 Transfer Complete Interrupt Control Register 00008Bh Key Input Interrupt Control Register 00008Ch Timer A1 Interrupt Control Register 00008Dh Intelligent I/O Interrupt Control Register 1 00008Eh Timer A3 Interrupt Control Register 00008Fh Intelligent I/O Interrupt Control Register 3 000090h UART0 Transmit/NACK Interrupt Control Register 000091h Intelligent I/O Interrupt Control Register 5 000092h UART1 Transmit/NACK Interrupt Control Register 000093h Intelligent I/O Interrupt Control Register 7 000094h Timer B0 Interrupt Control Register 000095h Intelligent I/O Interrupt Control Register 9 000096h Timer B2 Interrupt Control Register 000097h Intelligent I/O Interrupt Control Register 11 000098h Timer B4 Interrupt Control Register 000099h 00009Ah INT4 Interrupt Control Register 00009Bh 00009Ch INT2 Interrupt Control Register 00009Dh 00009Eh INT0 Interrupt Control Register 00009Fh 0000A0h Intelligent I/O Interrupt Request Register 0 0000A1h Intelligent I/O Interrupt Request Register 1 0000A2h Intelligent I/O Interrupt Request Register 2 0000A3h Intelligent I/O Interrupt Request Register 3 0000A4h Intelligent I/O Interrupt Request Register 4 0000A5h Intelligent I/O Interrupt Request Register 5 0000A6h Intelligent I/O Interrupt Request Register 6 0000A7h Intelligent I/O Interrupt Request Register 7 0000A8h Intelligent I/O Interrupt Request Register 8 0000A9h Intelligent I/O Interrupt Request Register 9 0000AAh Intelligent I/O Interrupt Request Register 10 0000ABh Intelligent I/O Interrupt Request Register 11 0000ACh 0000ADh 0000AEh 0000AFh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 38 of 99 Symbol DM1IC BCN1IC/BCN4IC Reset Value XXXX X000b XXXX X000b DM3IC KUPIC TA1IC IIO1IC TA3IC IIO3IC S0TIC IIO5IC S1TIC IIO7IC TB0IC IIO9IC TB2IC IIO11IC TB4IC XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b INT4IC XX00 X000b INT2IC XX00 X000b INT0IC XX00 X000b IIO0IR IIO1IR IIO2IR IIO3IR IIO4IR IIO5IR IIO6IR IIO7IR IIO8IR IIO9IR IIO10IR IIO11IR 0000 0XX1b 0000 0XX1b 0000 0X01b 0000 XXX1b 000X 0XX1b 000X 0XX1b 000X 0XX1b X00X 0XX1b XX0X 0XX1b 0000 0XX1b 0000 0XX1b 0000 0XX1b R32C/111 Group Table 4.4 4. Special Function Registers (SFRs) SFR List (4) Address Register 0000B0h Intelligent I/O Interrupt Enable Register 0 0000B1h Intelligent I/O Interrupt Enable Register 1 0000B2h Intelligent I/O Interrupt Enable Register 2 0000B3h Intelligent I/O Interrupt Enable Register 3 0000B4h Intelligent I/O Interrupt Enable Register 4 0000B5h Intelligent I/O Interrupt Enable Register 5 0000B6h Intelligent I/O Interrupt Enable Register 6 0000B7h Intelligent I/O Interrupt Enable Register 7 0000B8h Intelligent I/O Interrupt Enable Register 8 0000B9h Intelligent I/O Interrupt Enable Register 9 0000BAh Intelligent I/O Interrupt Enable Register 10 0000BBh Intelligent I/O Interrupt Enable Register 11 0000BCh 0000BDh 0000BEh 0000BFh 0000C0h 0000C1h 0000C2h 0000C3h 0000C4h 0000C5h 0000C6h 0000C7h 0000C8h 0000C9h 0000CAh 0000CBh 0000CCh 0000CDh 0000CEh 0000CFh 0000D0h 0000D1h 0000D2h 0000D3h 0000D4h 0000D5h 0000D6h 0000D7h 0000D8h 0000D9h 0000DAh 0000DBh 0000DCh 0000DDh UART7 Transmit Interrupt Control Register 0000DEh 0000DFh UART8 Transmit Interrupt Control Register X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 39 of 99 Symbol IIO0IE IIO1IE IIO2IE IIO3IE IIO4IE IIO5IE IIO6IE IIO7IE IIO8IE IIO9IE IIO10IE IIO11IE 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h Reset Value S7TIC XXXX X000b S8TIC XXXX X000b R32C/111 Group Table 4.5 4. Special Function Registers (SFRs) SFR List (5) Address Register 0000E0h 0000E1h 0000E2h 0000E3h 0000E4h 0000E5h 0000E6h 0000E7h 0000E8h 0000E9h 0000EAh 0000EBh 0000ECh 0000EDh 0000EEh 0000EFh 0000F0h 0000F1h 0000F2h 0000F3h 0000F4h 0000F5h 0000F6h 0000F7h 0000F8h 0000F9h 0000FAh 0000FBh 0000FCh 0000FDh UART7 Receive Interrupt Control Register 0000FEh 0000FFh UART8 Receive Interrupt Control Register 000100h Group 1 Time Measurement/Waveform Generation Register 0 000101h 000102h Group 1 Time Measurement/Waveform Generation Register 1 000103h 000104h Group 1 Time Measurement/Waveform Generation Register 2 000105h 000106h Group 1 Time Measurement/Waveform Generation Register 3 000107h X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 40 of 99 Symbol Reset Value S7RIC XXXX X000b S8RIC G1TM0/G1PO0 XXXX X000b XXXXh G1TM1/G1PO1 XXXXh G1TM2/G1PO2 XXXXh G1TM3/G1PO3 XXXXh R32C/111 Group Table 4.6 4. Special Function Registers (SFRs) SFR List (6) Address Register 000108h Group 1 Time Measurement/Waveform Generation Register 4 000109h 00010Ah Group 1 Time Measurement/Waveform Generation Register 5 00010Bh 00010Ch Group 1 Time Measurement/Waveform Generation Register 6 00010Dh 00010Eh Group 1 Time Measurement/Waveform Generation Register 7 00010Fh 000110h Group 1 Waveform Generation Control Register 0 000111h Group 1 Waveform Generation Control Register 1 000112h Group 1 Waveform Generation Control Register 2 000113h Group 1 Waveform Generation Control Register 3 000114h Group 1 Waveform Generation Control Register 4 000115h Group 1 Waveform Generation Control Register 5 000116h Group 1 Waveform Generation Control Register 6 000117h Group 1 Waveform Generation Control Register 7 000118h Group 1 Time Measurement Control Register 0 000119h Group 1 Time Measurement Control Register 1 00011Ah Group 1 Time Measurement Control Register 2 00011Bh Group 1 Time Measurement Control Register 3 00011Ch Group 1 Time Measurement Control Register 4 00011Dh Group 1 Time Measurement Control Register 5 00011Eh Group 1 Time Measurement Control Register 6 00011Fh Group 1 Time Measurement Control Register 7 000120h Group 1 Base Timer Register 000121h 000122h Group 1 Base Timer Control Register 0 000123h Group 1 Base Timer Control Register 1 000124h Group 1 Timer Measurement Prescaler Register 6 000125h Group 1 Timer Measurement Prescaler Register 7 000126h Group 1 Function Enable Register 000127h Group 1 Function Select Register 000128h 000129h 00012Ah 00012Bh 00012Ch 00012Dh 00012Eh 00012Fh 000130h to 00013Fh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 41 of 99 Symbol G1TM4/G1PO4 Reset Value XXXXh G1TM5/G1PO5 XXXXh G1TM6/G1PO6 XXXXh G1TM7/G1PO7 XXXXh G1POCR0 G1POCR1 G1POCR2 G1POCR3 G1POCR4 G1POCR5 G1POCR6 G1POCR7 G1TMCR0 G1TMCR1 G1TMCR2 G1TMCR3 G1TMCR4 G1TMCR5 G1TMCR6 G1TMCR7 G1BT 0000 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 00h 00h 00h 00h 00h 00h 00h 00h XXXXh G1BCR0 G1BCR1 G1TPR6 G1TPR7 G1FE G1FS 00h 0000 0000b 00h 00h 00h 00h R32C/111 Group Table 4.7 4. Special Function Registers (SFRs) SFR List (7) Address Register 000140h Group 2 Waveform Generation Register 0 000141h 000142h Group 2 Waveform Generation Register 1 000143h 000144h Group 2 Waveform Generation Register 2 000145h 000146h Group 2 Waveform Generation Register 3 000147h 000148h Group 2 Waveform Generation Register 4 000149h 00014Ah Group 2 Waveform Generation Register 5 00014Bh 00014Ch Group 2 Waveform Generation Register 6 00014Dh 00014Eh Group 2 Waveform Generation Register 7 00014Fh 000150h Group 2 Waveform Generation Control Register 0 000151h Group 2 Waveform Generation Control Register 1 000152h Group 2 Waveform Generation Control Register 2 000153h Group 2 Waveform Generation Control Register 3 000154h Group 2 Waveform Generation Control Register 4 000155h Group 2 Waveform Generation Control Register 5 000156h Group 2 Waveform Generation Control Register 6 000157h Group 2 Waveform Generation Control Register 7 000158h 000159h 00015Ah 00015Bh 00015Ch 00015Dh 00015Eh 00015Fh 000160h Group 2 Base Timer Register 000161h 000162h Group 2 Base Timer Control Register 0 000163h Group 2 Base Timer Control Register 1 000164h Base Timer Start Register 000165h 000166h Group 2 Function Enable Register 000167h Group 2 RTP Output Buffer Register 000168h 000169h 00016Ah Group 2 Serial Interface Mode Register 00016Bh Group 2 Serial Interface Control Register 00016Ch Group 2 SI/O Transmit Buffer Register 00016Dh 00016Eh Group 2 SI/O Receive Buffer Register 00016Fh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 42 of 99 Symbol G2PO0 Reset Value XXXXh G2PO1 XXXXh G2PO2 XXXXh G2PO3 XXXXh G2PO4 XXXXh G2PO5 XXXXh G2PO6 XXXXh G2PO7 XXXXh G2POCR0 G2POCR1 G2POCR2 G2POCR3 G2POCR4 G2POCR5 G2POCR6 G2POCR7 0000 0000b 0000 0000b 0000 0000b 0000 0000b 0000 0000b 0000 0000b 0000 0000b 0000 0000b G2BT XXXXh G2BCR0 G2BCR1 BTSR 00h 0000 0000b XXXX 0000b G2FE G2RTP 00h 00h G2MR G2CR G2TB 00XX X000b 0000 X110b XXXXh G2RB XXXXh R32C/111 Group Table 4.8 4. Special Function Registers (SFRs) SFR List (8) Address Register 000170h Group 2 IE Bus Address Register 000171h 000172h Group 2 IE Bus Control Register 000173h Group 2 IE Bus Transmit Interrupt Source Detect Register 000174h Group 2 IE Bus Receive Interrupt Source Detect Register 000175h 000176h 000177h 000178h 000179h 00017Ah 00017Bh 00017Ch 00017Dh 00017Eh 00017Fh 000180h Group 0 Time Measurement/Waveform Generation Register 0 000181h 000182h Group 0 Time Measurement/Waveform Generation Register 1 000183h 000184h Group 0 Time Measurement/Waveform Generation Register 2 000185h 000186h Group 0 Time Measurement/Waveform Generation Register 3 000187h 000188h Group 0 Time Measurement/Waveform Generation Register 4 000189h 00018Ah Group 0 Time Measurement/Waveform Generation Register 5 00018Bh 00018Ch Group 0 Time Measurement/Waveform Generation Register 6 00018Dh 00018Eh Group 0 Time Measurement/Waveform Generation Register 7 00018Fh 000190h Group 0 Waveform Generation Control Register 0 000191h Group 0 Waveform Generation Control Register 1 000192h Group 0 Waveform Generation Control Register 2 000193h Group 0 Waveform Generation Control Register 3 000194h Group 0 Waveform Generation Control Register 4 000195h Group 0 Waveform Generation Control Register 5 000196h Group 0 Waveform Generation Control Register 6 000197h Group 0 Waveform Generation Control Register 7 000198h Group 0 Time Measurement Control Register 0 000199h Group 0 Time Measurement Control Register 1 00019Ah Group 0 Time Measurement Control Register 2 00019Bh Group 0 Time Measurement Control Register 3 00019Ch Group 0 Time Measurement Control Register 4 00019Dh Group 0 Time Measurement Control Register 5 00019Eh Group 0 Time Measurement Control Register 6 00019Fh Group 0 Time Measurement Control Register 7 X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 43 of 99 IEAR Symbol Reset Value XXXXh IECR IETIF IERIF 00XX X000b XXX0 0000b XXX0 0000b G0TM0/G0PO0 XXXXh G0TM1/G0PO1 XXXXh G0TM2/G0PO2 XXXXh G0TM3/G0PO3 XXXXh G0TM4/G0PO4 XXXXh G0TM5/G0PO5 XXXXh G0TM6/G0PO6 XXXXh G0TM7/G0PO7 XXXXh G0POCR0 G0POCR1 G0POCR2 G0POCR3 G0POCR4 G0POCR5 G0POCR6 G0POCR7 G0TMCR0 G0TMCR1 G0TMCR2 G0TMCR3 G0TMCR4 G0TMCR5 G0TMCR6 G0TMCR7 0000 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 0X00 X000b 00h 00h 00h 00h 00h 00h 00h 00h R32C/111 Group Table 4.9 4. Special Function Registers (SFRs) SFR List (9) Address Register 0001A0h Group 0 Base Timer Register 0001A1h 0001A2h Group 0 Base Timer Control Register 0 0001A3h Group 0 Base Timer Control Register 1 0001A4h Group 0 Timer Measurement Prescaler Register 6 0001A5h Group 0 Timer Measurement Prescaler Register 7 0001A6h Group 0 Function Enable Register 0001A7h Group 0 Function Select Register 0001A8h 0001A9h 0001AAh 0001ABh 0001ACh 0001ADh 0001AEh 0001AFh 0001B0h 0001B1h 0001B2h 0001B3h 0001B4h 0001B5h 0001B6h 0001B7h 0001B8h 0001B9h 0001BAh 0001BBh 0001BCh 0001BDh 0001BEh 0001BFh 0001C0h 0001C1h 0001C2h 0001C3h 0001C4h UART5 Special Mode Register 4 0001C5h UART5 Special Mode Register 3 0001C6h UART5 Special Mode Register 2 0001C7h UART5 Special Mode Register 0001C8h UART5 Transmit/Receive Mode Register 0001C9h UART5 Bit Rate Register 0001CAh UART5 Transmit Buffer Register 0001CBh 0001CCh UART5 Transmit/Receive Control Register 0 0001CDh UART5 Transmit/Receive Control Register 1 0001CEh UART5 Receive Buffer Register 0001CFh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 44 of 99 G0BT Symbol Reset Value XXXXh G0BCR0 G0BCR1 G0TPR6 G0TPR7 G0FE G0FS 00h 0000 0000b 00h 00h 00h 00h U5SMR4 U5SMR3 U5SMR2 U5SMR U5MR U5BRG U5TB 00h 00h 00h 00h 00h XXh XXXXh U5C0 U5C1 U5RB 0000 1000b 0000 0010b XXXXh R32C/111 Group Table 4.10 4. Special Function Registers (SFRs) SFR List (10) Address Register 0001D0h 0001D1h 0001D2h 0001D3h 0001D4h UART6 Special Mode Register 4 0001D5h UART6 Special Mode Register 3 0001D6h UART6 Special Mode Register 2 0001D7h UART6 Special Mode Register 0001D8h UART6 Transmit/Receive Mode Register 0001D9h UART6 Bit Rate Register 0001DAh UART6 Transmit Buffer Register 0001DBh 0001DCh UART6 Transmit/Receive Control Register 0 0001DDh UART6 Transmit/Receive Control Register 1 0001DEh UART6 Receive Buffer Register 0001DFh 0001E0h UART7 Transmit/Receive Mode Register 0001E1h UART7 Bit Rate Register 0001E2h UART7 Transmit Buffer Register 0001E3h 0001E4h UART7 Transmit/Receive Control Register 0 0001E5h UART7 Transmit/Receive Control Register 1 0001E6h UART7 Receive Buffer Register 0001E7h 0001E8h UART8 Transmit/Receive Mode Register 0001E9h UART8 Bit Rate Register 0001EAh UART8 Transmit Buffer Register 0001EBh 0001ECh UART8 Transmit/Receive Control Register 0 0001EDh UART8 Transmit/Receive Control Register 1 0001EEh UART8 Receive Buffer Register 0001EFh 0001F0h UART7, UART8 Transmit/Receive Control Register 2 0001F1h 0001F2h 0001F3h 0001F4h 0001F5h 0001F6h 0001F7h 0001F8h 0001F9h 0001FAh 0001FBh 0001FCh 0001FDh 0001FEh 0001FFh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 45 of 99 Symbol Reset Value U6SMR4 U6SMR3 U6SMR2 U6SMR U6MR U6BRG U6TB 00h 00h 00h 00h 00h XXh XXXXh U6C0 U6C1 U6RB 0000 1000b 0000 0010b XXXXh U7MR U7BRG U7TB 00h XXh XXXXh U7C0 U7C1 U7RB 00X0 1000b XXXX 0010b XXXXh U8MR U8BRG U8TB 00h XXh XXXXh U8C0 U8C1 U8RB 00X0 1000b XXXX 0010b XXXXh U78CON X000 0000b R32C/111 Group Table 4.11 4. Special Function Registers (SFRs) SFR List (11) Address Register 000200h to 0002BFh 0002C0h X0 Register/Y0 Register 0002C1h 0002C2h X1 Register/Y1 Register 0002C3h 0002C4h X2 Register/Y2 Register 0002C5h 0002C6h X3 Register/Y3 Register 0002C7h 0002C8h X4 Register/Y4 Register 0002C9h 0002CAh X5 Register/Y5 Register 0002CBh 0002CCh X6 Register/Y6 Register 0002CDh 0002CEh X7 Register/Y7 Register 0002CFh 0002D0h X8 Register/Y8 Register 0002D1h 0002D2h X9 Register/Y9 Register 0002D3h 0002D4h X10 Register/Y10 Register 0002D5h 0002D6h X11 Register/Y11 Register 0002D7h 0002D8h X12 Register/Y12 Register 0002D9h 0002DAh X13 Register/Y13 Register 0002DBh 0002DCh X14 Register/Y14 Register 0002DDh 0002DEh X15 Register/Y15 Register 0002DFh 0002E0h XY Control Register 0002E1h 0002E2h 0002E3h 0002E4h UART1 Special Mode Register 4 0002E5h UART1 Special Mode Register 3 0002E6h UART1 Special Mode Register 2 0002E7h UART1 Special Mode Register 0002E8h UART1 Transmit/Receive Mode Register 0002E9h UART1 Bit Rate Register 0002EAh UART1 Transmit Buffer Register 0002EBh 0002ECh UART1 Transmit/Receive Control Register 0 0002EDh UART1 Transmit/Receive Control Register 1 0002EEh UART1 Receive Buffer Register 0002EFh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 46 of 99 Symbol Reset Value X0R/Y0R XXXXh X1R/Y1R XXXXh X2R/Y2R XXXXh X3R/Y3R XXXXh X4R/Y4R XXXXh X5R/Y5R XXXXh X6R/Y6R XXXXh X7R/Y7R XXXXh X8R/Y8R XXXXh X9R/Y9R XXXXh X10R/Y10R XXXXh X11R/Y11R XXXXh X12R/Y12R XXXXh X13R/Y13R XXXXh X14R/Y14R XXXXh X15R/Y15R XXXXh XYC XXXX XX00b U1SMR4 U1SMR3 U1SMR2 U1SMR U1MR U1BRG U1TB 00h 00h 00h 00h 00h XXh XXXXh U1C0 U1C1 U1RB 0000 1000b 0000 0010b XXXXh R32C/111 Group Table 4.12 4. Special Function Registers (SFRs) SFR List (12) Address Register 0002F0h 0002F1h 0002F2h 0002F3h 0002F4h UART4 Special Mode Register 4 0002F5h UART4 Special Mode Register 3 0002F6h UART4 Special Mode Register 2 0002F7h UART4 Special Mode Register 0002F8h UART4 Transmit/Receive Mode Register 0002F9h UART4 Bit Rate Register 0002FAh UART4 Transmit Buffer Register 0002FBh 0002FCh UART4 Transmit/Receive Control Register 0 0002FDh UART4 Transmit/Receive Control Register 1 0002FEh UART4 Receive Buffer Register 0002FFh 000300h Count Start Register for Timers B3, B4 and B5 000301h 000302h Timer A1-1 Register 000303h 000304h Timer A2-1 Register 000305h 000306h Timer A4-1 Register 000307h 000308h Three-phase PWM Control Register 0 000309h Three-phase PWM Control Register 1 00030Ah Three-phase Output Buffer Register 0 00030Bh Three-phase Output Buffer Register 1 00030Ch Dead Time Timer 00030Dh Timer B2 Interrupt Generating Frequency Set Counter 00030Eh 00030Fh 000310h Timer B3 Register 000311h 000312h Timer B4 Register 000313h 000314h Timer B5 Register 000315h 000316h 000317h 000318h 000319h 00031Ah 00031Bh Timer B3 Mode Register 00031Ch Timer B4 Mode Register 00031Dh Timer B5 Mode Register 00031Eh 00031Fh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 47 of 99 Symbol Reset Value U4SMR4 U4SMR3 U4SMR2 U4SMR U4MR U4BRG U4TB 00h 00h 00h 00h 00h XXh XXXXh U4C0 U4C1 U4RB 0000 1000b 0000 0010b XXXXh TBSR 000X XXXXb TA11 XXXXh TA21 XXXXh TA41 XXXXh INVC0 INVC1 IDB0 IDB1 DTT ICTB2 00h 00h XX11 1111b XX11 1111b XXh XXh TB3 XXXXh TB4 XXXXh TB5 XXXXh TB3MR TB4MR TB5MR 00XX 0000b 00XX 0000b 00XX 0000b R32C/111 Group Table 4.13 4. Special Function Registers (SFRs) SFR List (13) Address Register 000320h 000321h 000322h 000323h 000324h UART3 Special Mode Register 4 000325h UART3 Special Mode Register 3 000326h UART3 Special Mode Register 2 000327h UART3 Special Mode Register 000328h UART3 Transmit/Receive Mode Register 000329h UART3 Bit Rate Register 00032Ah UART3 Transmit Buffer Register 00032Bh 00032Ch UART3 Transmit/Receive Control Register 0 00032Dh UART3 Transmit/Receive Control Register 1 00032Eh UART3 Receive Buffer Register 00032Fh 000330h 000331h 000332h 000333h 000334h UART2 Special Mode Register 4 000335h UART2 Special Mode Register 3 000336h UART2 Special Mode Register 2 000337h UART2 Special Mode Register 000338h UART2 Transmission/Receive Mode Register 000339h UART2 Bit Rate Register 00033Ah UART2 Transmit Buffer Register 00033Bh 00033Ch UART2 Transmit/Receive Control Register 0 00033Dh UART2 Transmit/Receive Control Register 1 00033Eh UART2 Receive Buffer Register 00033Fh 000340h Count Start Register 000341h Clock Prescaler Reset Register 000342h One-shot Start Register 000343h Trigger Select Register 000344h Increment/Decrement Counting Select Register 000345h 000346h Timer A0 Register 000347h 000348h Timer A1 Register 000349h 00034Ah Timer A2 Register 00034Bh 00034Ch Timer A3 Register 00034Dh 00034Eh Timer A4 Register 00034Fh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 48 of 99 Symbol Reset Value U3SMR4 U3SMR3 U3SMR2 U3SMR U3MR U3BRG U3TB 00h 00h 00h 00h 00h XXh XXXXh U3C0 U3C1 U3RB 0000 1000b 0000 0010b XXXXh U2SMR4 U2SMR3 U2SMR2 U2SMR U2MR U2BRG U2TB 00h 00h 00h 00h 00h XXh XXXXh U2C0 U2C1 U2RB 0000 1000b 0000 0010b XXXXh TABSR CPSRF ONSF TRGSR UDF 00h 0XXX XXXXb 00h 00h 0000 0000b TA0 XXXXh TA1 XXXXh TA2 XXXXh TA3 XXXXh TA4 XXXXh R32C/111 Group Table 4.14 4. Special Function Registers (SFRs) SFR List (14) Address Register 000350h Timer B0 Register 000351h 000352h Timer B1 Register 000353h 000354h Timer B2 Register 000355h 000356h Timer A0 Mode Register 000357h Timer A1 Mode Register 000358h Timer A2 Mode Register 000359h Timer A3 Mode Register 00035Ah Timer A4 Mode Register 00035Bh Timer B0 Mode Register 00035Ch Timer B1 Mode Register 00035Dh Timer B2 Mode Register 00035Eh Timer B2 Special Mode Register 00035Fh Count Source Prescaler Register 000360h 000361h 000362h 000363h 000364h UART0 Special Mode Register 4 000365h UART0 Special Mode Register 3 000366h UART0 Special Mode Register 2 000367h UART0 Special Mode Register 000368h UART0 Transmit/Receive Mode Register 000369h UART0 Bit Rate Register 00036Ah UART0 Transmit Buffer Register 00036Bh 00036Ch UART0 Transmit/Receive Control Register 0 00036Dh UART0 Transmit/Receive Control Register 1 00036Eh UART0 Receive Buffer Register 00036Fh 000370h 000371h 000372h 000373h 000374h 000375h 000376h 000377h 000378h 000379h 00037Ah 00037Bh 00037Ch CRC Data Register 00037Dh 00037Eh CRC Input Register 00037Fh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 49 of 99 TB0 Symbol Reset Value XXXXh TB1 XXXXh TB2 XXXXh TA0MR TA1MR TA2MR TA3MR TA4MR TB0MR TB1MR TB2MR TB2SC TCSPR 0000 0000b 0000 0000b 0000 0000b 0000 0000b 0000 0000b 00XX 0000b 00XX 0000b 00XX 0000b XXXX XXX0b 0000 0000b U0SMR4 U0SMR3 U0SMR2 U0SMR U0MR U0BRG U0TB 00h 00h 00h 00h 00h XXh XXXXh U0C0 U0C1 U0RB 0000 1000b 0000 0010b XXXXh CRCD XXXXh CRCIN XXh R32C/111 Group Table 4.15 4. Special Function Registers (SFRs) SFR List (15) Address Register 000380h A/D0 Register 0 000381h 000382h A/D0 Register 1 000383h 000384h A/D0 Register 2 000385h 000386h A/D0 Register 3 000387h 000388h A/D0 Register 4 000389h 00038Ah A/D0 Register 5 00038Bh 00038Ch A/D0 Register 6 00038Dh 00038Eh A/D0 Register 7 00038Fh 000390h 000391h 000392h A/D0 Control Register 4 000393h 000394h A/D0 Control Register 2 000395h A/D0 Control Register 3 000396h A/D0 Control Register 0 000397h A/D0 Control Register 1 000398h D/A Register 0 000399h 00039Ah D/A Register 1 00039Bh 00039Ch D/A Control Register 00039Dh 00039Eh 00039Fh 0003A0h 0003A1h 0003A2h 0003A3h 0003A4h 0003A5h 0003A6h 0003A7h 0003A8h 0003A9h 0003AAh 0003ABh 0003ACh 0003ADh 0003AEh 0003AFh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 50 of 99 AD00 Symbol Reset Value 00XXh AD01 00XXh AD02 00XXh AD03 00XXh AD04 00XXh AD05 00XXh AD06 00XXh AD07 00XXh AD0CON4 XXXX 00XXb AD0CON2 AD0CON3 AD0CON0 AD0CON1 DA0 X00X X000b XXXX X000b 00h 00h XXh DA1 XXh DACON XXXX XX00b R32C/111 Group Table 4.16 4. Special Function Registers (SFRs) SFR List (16) Address Register 0003B0h 0003B1h 0003B2h 0003B3h 0003B4h 0003B5h 0003B6h 0003B7h 0003B8h 0003B9h 0003BAh 0003BBh 0003BCh 0003BDh 0003BEh 0003BFh 0003C0h Port P0 Register 0003C1h Port P1 Register 0003C2h Port P0 Direction Register 0003C3h Port P1 Direction Register 0003C4h Port P2 Register 0003C5h Port P3 Register 0003C6h Port P2 Direction Register 0003C7h Port P3 Direction Register 0003C8h Port P4 Register 0003C9h Port P5 Register 0003CAh Port P4 Direction Register 0003CBh Port P5 Direction Register 0003CCh Port P6 Register 0003CDh Port P7 Register 0003CEh Port P6 Direction Register 0003CFh Port P7 Direction Register 0003D0h Port P8 Register 0003D1h Port P9 Register 0003D2h Port P8 Direction Register 0003D3h Port P9 Direction Register 0003D4h Port P10 Register 0003D5h 0003D6h Port P10 Direction Register 0003D7h 0003D8h 0003D9h 0003DAh 0003DBh 0003DCh 0003DDh 0003DEh 0003DFh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 51 of 99 Symbol Reset Value P0 P1 PD0 PD1 P2 P3 PD2 PD3 P4 P5 PD4 PD5 P6 P7 PD6 PD7 P8 P9 PD8 PD9 P10 XXh XXh 0000 0000b 0000 0000b XXh XXh 0000 0000b 0000 0000b XXh XXh 0000 0000b 0000 0000b XXh XXh 0000 0000b 0000 0000b XXh XXh 00X0 0000b 0000 0000b XXh PD10 0000 0000b R32C/111 Group Table 4.17 4. Special Function Registers (SFRs) SFR List (17) Address Register 0003E0h 0003E1h 0003E2h 0003E3h 0003E4h 0003E5h 0003E6h 0003E7h 0003E8h 0003E9h 0003EAh 0003EBh 0003ECh 0003EDh 0003EEh 0003EFh 0003F0h Pull-up Control Register 0 0003F1h Pull-up Control Register 1 0003F2h Pull-up Control Register 2 0003F3h Pull-up Control Register 3 0003F4h 0003F5h 0003F6h 0003F7h 0003F8h 0003F9h 0003FAh 0003FBh 0003FCh 0003FDh 0003FEh 0003FFh Port Control Register X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 52 of 99 Symbol Reset Value PUR0 PUR1 PUR2 PUR3 0000 0000b XXXX 0000b 0000 0000b XXXX XX00b PCR XXXX XXX0b R32C/111 Group Table 4.18 4. Special Function Registers (SFRs) SFR List (18) Address Register 040000h Flash Memory Control Register 0 040001h Flash Memory Status Register 0 040002h 040003h 040004h 040005h 040006h 040007h 040008h Flash Register Protection Unlock Register 0 040009h Flash Memory Control Register 1 04000Ah Block Protect Bit Monitor Register 0 04000Bh Block Protect Bit Monitor Register 1 04000Ch 04000Dh 04000Eh 04000Fh 040010h 040011h 040012h 040013h 040014h 040015h 040016h 040017h 040018h 040019h 04001Ah 04001Bh 04001Ch 04001Dh 04001Eh 04001Fh 040020h PLL Control Register 0 040021h PLL Control Register 1 040022h 040023h 040024h 040025h 040026h 040027h 040028h 040029h 04002Ah 04002Bh 04002Ch 04002Dh 04002Eh 04002Fh X: Undefined Blanks are reserved. No access is allowed. Note: 1. The status of protect bit of each block in flash memory is reflected. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 53 of 99 Symbol FMR0 FMSR0 Reset Value 0X01 XX00b 1000 0000b FPR0 FMR1 FBPM0 FBPM1 00h 0000 0010b ??X? ????b (1) XXX? ????b (1) PLC0 PLC1 0000 0001b 0001 1111b R32C/111 Group Table 4.19 4. Special Function Registers (SFRs) SFR List (19) Address Register 040030h to 04003Fh 040040h 040041h 040042h 040043h 040044h Processor Mode Register 0 (1) 040045h 040046h System Clock Control Register 0 040047h System Clock Control Register 1 040048h Processor Mode Register 3 040049h 04004Ah Protect Register 04004Bh 04004Ch Protect Register 3 04004Dh Oscillator Stop Detection Register 04004Eh 04004Fh 040050h 040051h 040052h 040053h Processor Mode Register 2 040054h Chip Select Output Pin Setting Register 0 040055h Chip Select Output Pin Setting Register 1 040056h 040057h 040058h 040059h 04005Ah Low Speed Mode Clock Control Register 04005Bh 04005Ch 04005Dh 04005Eh 04005Fh 040060h Voltage Regulator Control Register 040061h 040062h Low Voltage Detector Control Register 040063h 040064h Detection Voltage Configuration Register 040065h 040066h 040067h 040068h to 040093h X: Undefined Blanks are reserved. No access is allowed. Symbol Reset Value PM0 1000 0000b (CNVSS pin = Low) 0000 0011b (CNVSS pin = High) CM0 CM1 PM3 0000 1000b 0010 0000b 00h PRCR XXXX X000b PRCR3 CM2 0000 0000b 00h PM2 CSOP0 CSOP1 00h 1000 XXXXb 01X0 XXXXb CM3 XXXX XX00b VRCR 0000 0000b LVDC 0000 XX00b DVCR 0000 XXXXb Note: 1. The value in the PM0 register remains unchanged even after a software reset or watchdog timer reset. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 54 of 99 R32C/111 Group Table 4.20 4. Special Function Registers (SFRs) SFR List (20) Address Register 040094h 040095h 040096h 040097h Three-phase Output Buffer Control Register 040098h Input Function Select Register 0 040099h 04009Ah Input Function Select Register 2 04009Bh Input Function Select Register 3 04009Ch 04009Dh 04009Eh 04009Fh Input Function Select Register 7 (3) 0400A0h Port P0_0 Function Select Register 0400A1h Port P1_0 Function Select Register 0400A2h Port P0_1 Function Select Register 0400A3h Port P1_1 Function Select Register 0400A4h Port P0_2 Function Select Register 0400A5h Port P1_2 Function Select Register 0400A6h Port P0_3 Function Select Register 0400A7h Port P1_3 Function Select Register 0400A8h Port P0_4 Function Select Register 0400A9h Port P1_4 Function Select Register 0400AAh Port P0_5 Function Select Register 0400ABh Port P1_5 Function Select Register 0400ACh Port P0_6 Function Select Register 0400ADh Port P1_6 Function Select Register 0400AEh Port P0_7 Function Select Register 0400AFh Port P1_7 Function Select Register 0400B0h Port P2_0 Function Select Register 0400B1h Port P3_0 Function Select Register 0400B2h Port P2_1 Function Select Register 0400B3h Port P3_1 Function Select Register 0400B4h Port P2_2 Function Select Register 0400B5h Port P3_2 Function Select Register 0400B6h Port P2_3 Function Select Register 0400B7h Port P3_3 Function Select Register 0400B8h Port P2_4 Function Select Register 0400B9h Port P3_4 Function Select Register 0400BAh Port P2_5 Function Select Register 0400BBh Port P3_5 Function Select Register 0400BCh Port P2_6 Function Select Register 0400BDh Port P3_6 Function Select Register 0400BEh Port P2_7 Function Select Register 0400BFh Port P3_7 Function Select Register X: Undefined Blanks are reserved. No access is allowed. Symbol Reset Value IOBC IFS0 0XXX XXXXb X000 0000b (1) IFS2 IFS3 0000 00X0b (2) XXXX XX00b IFS7 P0_0S P1_0S P0_1S P1_1S P0_2S P1_2S P0_3S P1_3S P0_4S P1_4S P0_5S P1_5S P0_6S P1_6S P0_7S P1_7S P2_0S P3_0S P2_1S P3_1S P2_2S P3_2S P2_3S P3_3S P2_4S P3_4S P2_5S P3_5S P2_6S P3_6S P2_7S P3_7S XXXX XX0Xb 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b Notes: 1. The reset value is 0000 0000b in the 80-/64-pin package. 2. The reset value is 0000 000Xb in the 80-/64-pin package. 3. This register is provided for the 80-64/pin package. No access is allowed in the 100-pin package. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 55 of 99 R32C/111 Group Table 4.21 4. Special Function Registers (SFRs) SFR List (21) Address Register 0400C0h Port P4_0 Function Select Register 0400C1h Port P5_0 Function Select Register 0400C2h Port P4_1 Function Select Register 0400C3h Port P5_1 Function Select Register 0400C4h Port P4_2 Function Select Register 0400C5h Port P5_2 Function Select Register 0400C6h Port P4_3 Function Select Register 0400C7h Port P5_3 Function Select Register 0400C8h Port P4_4 Function Select Register 0400C9h Port P5_4 Function Select Register 0400CAh Port P4_5 Function Select Register 0400CBh Port P5_5 Function Select Register 0400CCh Port P4_6 Function Select Register 0400CDh Port P5_6 Function Select Register 0400CEh Port P4_7 Function Select Register 0400CFh Port P5_7 Function Select Register 0400D0h Port P6_0 Function Select Register 0400D1h Port P7_0 Function Select Register 0400D2h Port P6_1 Function Select Register 0400D3h Port P7_1 Function Select Register 0400D4h Port P6_2 Function Select Register 0400D5h Port P7_2 Function Select Register 0400D6h Port P6_3 Function Select Register 0400D7h Port P7_3 Function Select Register 0400D8h Port P6_4 Function Select Register 0400D9h Port P7_4 Function Select Register 0400DAh Port P6_5 Function Select Register 0400DBh Port P7_5 Function Select Register 0400DCh Port P6_6 Function Select Register 0400DDh Port P7_6 Function Select Register 0400DEh Port P6_7 Function Select Register 0400DFh Port P7_7 Function Select Register 0400E0h Port P8_0 Function Select Register 0400E1h 0400E2h Port P8_1 Function Select Register 0400E3h 0400E4h Port P8_2 Function Select Register 0400E5h 0400E6h Port P8_3 Function Select Register 0400E7h Port P9_3 Function Select Register 0400E8h Port P8_4 Function Select Register 0400E9h Port P9_4 Function Select Register 0400EAh 0400EBh Port P9_5 Function Select Register 0400ECh Port P8_6 Function Select Register 0400EDh Port P9_6 Function Select Register 0400EEh Port P8_7 Function Select Register 0400EFh Port P9_7 Function Select Register X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 56 of 99 Symbol P4_0S P5_0S P4_1S P5_1S P4_2S P5_2S P4_3S P5_3S P4_4S P5_4S P4_5S P5_5S P4_6S P5_6S P4_7S P5_7S P6_0S P7_0S P6_1S P7_1S P6_2S P7_2S P6_3S P7_3S P6_4S P7_4S P6_5S P7_5S P6_6S P7_6S P6_7S P7_7S P8_0S Reset Value XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b XXXX X000b P8_1S XXXX X000b P8_2S XXXX X000b P8_3S P9_3S P8_4S P9_4S XXXX X000b 0XXX X000b XXXX X000b 0XXX X000b P9_5S P8_6S P9_6S P8_7S P9_7S 0XXX X000b XXXX X000b 0XXX X000b XXXX X000b XXXX X000b R32C/111 Group Table 4.22 4. Special Function Registers (SFRs) SFR List (22) Address Register 0400F0h Port P10_0 Function Select Register 0400F1h 0400F2h Port P10_1 Function Select Register 0400F3h 0400F4h Port P10_2 Function Select Register 0400F5h 0400F6h Port P10_3 Function Select Register 0400F7h 0400F8h Port P10_4 Function Select Register 0400F9h 0400FAh Port P10_5 Function Select Register 0400FBh 0400FCh Port P10_6 Function Select Register 0400FDh 0400FEh Port P10_7 Function Select Register 0400FFh 040100h 040101h 040102h 040103h 040104h 040105h 040106h 040107h 040108h 040109h 04010Ah 04010Bh 04010Ch 04010Dh 04010Eh 04010Fh 040110h 040111h 040112h 040113h 040114h 040115h 040116h 040117h 040118h 040119h 04011Ah 04011Bh 04011Ch 04011Dh 04011Eh 04011Fh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 57 of 99 Symbol P10_0S Reset Value 0XXX X000b P10_1S 0XXX X000b P10_2S 0XXX X000b P10_3S 0XXX X000b P10_4S 0XXX X000b P10_5S 0XXX X000b P10_6S 0XXX X000b P10_7S 0XXX X000b R32C/111 Group Table 4.23 4. Special Function Registers (SFRs) SFR List (23) Address Register 040120h to 04403Fh 044040h 044041h 044042h 044043h 044044h 044045h 044046h 044047h 044048h 044049h 04404Ah 04404Bh 04404Ch 04404Dh 04404Eh Watchdog Timer Start Register 04404Fh Watchdog Timer Control Register 044050h 044051h 044052h 044053h 044054h 044055h 044056h 044057h 044058h 044059h 04405Ah 04405Bh 04405Ch 04405Dh 04405Eh 04405Fh Protect Register 2 X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 58 of 99 Symbol Reset Value WDTS WDC XXXX XXXXb 000X XXXXb PRCR2 0XXX XXXXb R32C/111 Group Table 4.24 4. Special Function Registers (SFRs) SFR List (24) Address Register 044060h 044061h 044062h 044063h 044064h 044065h 044066h 044067h 044068h 044069h 04406Ah 04406Bh 04406Ch 04406Dh External Interrupt Source Select Register 1 04406Eh 04406Fh External Interrupt Source Select Register 0 044070h DMA0 Request Source Select Register 2 044071h DMA1 Request Source Select Register 2 044072h DMA2 Request Source Select Register 2 044073h DMA3 Request Source Select Register 2 044074h 044075h 044076h 044077h 044078h DMA0 Request Source Select Register 044079h DMA1 Request Source Select Register 04407Ah DMA2 Request Source Select Register 04407Bh DMA3 Request Source Select Register 04407Ch 04407Dh Wake-up IPL Setting Register 2 04407Eh 04407Fh Wake-up IPL Setting Register 1 044080h 044081h 044082h 044083h 044084h 044085h 044086h 044087h 044088h 044089h 04408Ah 04408Bh 04408Ch 04408Dh 04408Eh 04408Fh X: Undefined Blanks are reserved. No access is allowed. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 59 of 99 Symbol Reset Value IFSR1 X0XX XXXXb IFSR0 DM0SL2 DM1SL2 DM2SL2 DM3SL2 0000 0000b XX00 0000b XX00 0000b XX00 0000b XX00 0000b DM0SL DM1SL DM2SL DM3SL XXX0 0000b XXX0 0000b XXX0 0000b XXX0 0000b RIPL2 XX0X 0000b RIPL1 XX0X 0000b R32C/111 Group 5. 5. Electrical Characteristics Electrical Characteristics Table 5.1 Absolute Maximum Ratings (1) Symbol Characteristic Condition Value (2) Unit VCC1 = AVCC -0.3 to 6.0 V -- -0.3 to VCC1 V VCC1 = AVCC -0.3 to 6.0 V XIN, RESET, CNVSS, NSD, VREF, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (3) -0.3 to VCC1 +0.3 V P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (3) -0.3 to VCC2 +0.3 V -0.3 to 6.0 V XOUT, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (3) -0.3 to VCC1 +0.3 V P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (3) -0.3 to VCC2 +0.3 V -0.3 to 6.0 V 500 mW Operating temperature range -40 to 85 C Storage temperature range -65 to 150 C VCC1, VCC2 Supply voltage VCC2 Supply voltage AVCC Analog supply voltage VI Input voltage P7_0, P7_1 Output voltage VO P7_0, P7_1 Power consumption Pd -- Tstg Ta = 25C Notes: 1. Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2. The VCC2 pin is available in the 100-pin package only. It should be considered as VCC1 in the 80-/64pin package. 3. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, P9_1, and P9_4 are available in the 100-pin package only. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 60 of 99 R32C/111 Group Table 5.2 5. Electrical Characteristics Operating Conditions (1) (1) Symbol Characteristic Value (2) Min. Typ. Max. 3.0 5.0 5.5 Unit VCC1, VCC2 Digital supply voltage (VCC1 VCC2) AVCC Analog supply voltage VREF Reference voltage VSS Digital ground voltage 0 V AVSS Analog ground voltage 0 V dVCC1/dt VCC1 ramp up rate (VCC1 < 2.0 V) VIH VIL Topr High level input voltage Low level input voltage VCC1 V VCC1 3.0 V 0.05 V V/ms P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (4) 0.8 x VCC2 VCC2 V XIN, RESET, CNVSS, NSD, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_7 (3), P9_1, P9_3 to P9_7, P10_0 to P10_7 (4) 0.8 x VCC1 VCC1 V P7_0, P7_1 0.8 x VCC1 6.0 V P0_0 to P0_7, P1_0 to P1_7 (in single-chip mode) (4) 0.8 x VCC2 VCC2 V P0_0 to P0_7, P1_0 to P1_7 (in memory 0.5 x VCC2 expansion mode or microprocessor mode) (4, 5) VCC2 V P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (4) 0 0.2 x VCC2 V XIN, RESET, CNVSS, NSD, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7 (3), P9_1, P9_3 to P9_7, P10_0 to P10_7 (4) 0 0.2 x VCC1 V P0_0 to P0_7, P1_0 to P1_7 (in single-chip mode) (4) 0 0.2 x VCC2 V P0_0 to P0_7, P1_0 to P1_7 (in memory expansion mode or microprocessor mode) (4, 5) 0 0.16 x VCC2 V -20 85 C -40 85 C Operating Version N temperature Version D range Notes: 1. The device is operationally guaranteed under these operating conditions. 2. The VCC2 pin is available in the 100-pin package only. It should be considered as VCC1 in the 80-/64pin package. 3. VIH and VIL for P8_7 are specified for P8_7 as a programmable port. These values are not applicable to P8_7 as XCIN. 4. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, P9_1, and P9_4 are available in the 100-pin package only. 5. Memory expansion mode and microprocessor mode are available in the 100-pin package only. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 61 of 99 R32C/111 Group Table 5.3 Symbol CVDC 5. Electrical Characteristics Operating Conditions (2) (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) (1) Value (2) Characteristic Decoupling capacitance for voltage regulator Min. Typ. Max. Inter-pin voltage: 1.5 V 2.4 10.0 Unit F Notes: 1. The device is operationally guaranteed under these operating conditions. 2. This value should be satisfied with due consideration of every condition as follows: operating temperature, DC bias, aging, etc. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 62 of 99 R32C/111 Group Table 5.4 5. Electrical Characteristics Operating Conditions (3) (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) (1) Symbol Characteristic IOH(peak) High level P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, peak output P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, current (2) P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (3) Value Min. Typ. Max. Unit -10.0 mA P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (3) -5.0 mA IOL(peak) Low level P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, peak output P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, current (2) P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (3) 10.0 mA 5.0 mA IOH(avg) IOL(avg) High level average output current (4) Low level average output current (4) P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (3) Notes: 1. The device is operationally guaranteed under these operating conditions. 2. The following conditions should be satisfied: * The sum of IOL(peak) of ports P0, P1, P2, P8_6, P8_7, P9, and P10 is 80 mA or less. * The sum of IOL(peak) of ports P3, P4, P5, P6, P7, and P8_0 to P8_4 is 80 mA or less. * The sum of IOH(peak) of ports P0, P1, and P2 is -40 mA or less. * The sum of IOH(peak) of ports P8_6, P8_7, P9, and P10 is -40 mA or less. * The sum of IOH(peak) of ports P3, P4, and P5 is -40 mA or less. * The sum of IOH(peak) of ports P6, P7, and P8_0 to P8_4 is -40 mA or less. 3. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, and P9_4 are available in the 100-pin package only. 4. Average value within 100 ms. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 63 of 99 R32C/111 Group Table 5.5 5. Electrical Characteristics Operating Conditions (4) (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) (1) Symbol Value Characteristic Min. Typ. Max. Unit f(XIN) Main clock oscillator frequency 4 16 MHz f(XRef) Reference clock frequency 2 4 MHz f(PLL) PLL clock oscillator frequency 96 128 MHz f(Base) Base clock frequency 50 MHz tc(Base) Base clock cycle time f(CPU) CPU operating frequency tc(CPU) CPU clock cycle time f(BCLK) Peripheral bus clock operating frequency tc(BCLK) Peripheral bus clock cycle time f(PER) Peripheral clock source frequency f(XCIN) Sub clock oscillator frequency 20 50 20 40 Base clock (Internal signal) t c(CPU) CPU clock (Internal signal) t c(BCLK) Figure 5.1 Clock Cycle Time REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 64 of 99 MHz ns 32.768 t c(Base) MHz ns 25 Note: 1. The device is operationally guaranteed under these operating conditions. Peripheral bus clock (Internal signal) ns 32 MHz 62.5 kHz R32C/111 Group Table 5.6 5. Electrical Characteristics Operating Conditions (5) (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) (1) Symbol Vr(VCC1) Vr(VCC2) Value Characteristic Allowable ripple voltage Allowable ripple voltage dVr(VCC1)/dt Ripple voltage gradient dVr(VCC2)/dt Ripple voltage gradient Min. Typ. Max. Unit VCC1 = 5.0 V 0.5 Vp-p VCC1 = 3.0 V 0.3 Vp-p VCC2 = 5.0 V 0.5 Vp-p VCC2 = 3.0 V 0.3 Vp-p VCC1 = 5.0 V 0.3 V/ms VCC1 = 3.0 V 0.3 V/ms VCC2 = 5.0 V 0.3 V/ms VCC2 = 3.0 V 0.3 V/ms fr(VCC1) Allowable ripple frequency 10 kHz fr(VCC2) Allowable ripple frequency 10 kHz Note: 1. The device is operationally guaranteed under these operating conditions. 1 / f r(VCC1) VCC1 or VCC2 Figure 5.2 Ripple Waveform REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 65 of 99 or 1 / f r(VCC2) Vr(VCC1) or Vr(VCC2) R32C/111 Group Table 5.7 Symbol VRDR 5. Electrical Characteristics RAM Electrical Characteristics (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Characteristic RAM data retention voltage (1) Measurement condition in stop mode Value Min. Typ. Max. 2.0 Unit V Note: 1. The value listed in the table is the minimum VCC1 to retain RAM data. Table 5.8 Flash Memory Electrical Characteristics (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Symbol -- -- -- Min. Programming and erasure endurance of flash Program area memory (1) Data area 4-word program time Lock bit-program time Block erasure time -- -- Value Characteristic Data retention (2) Typ. Max. Unit 1000 times 10000 times Program area 150 900 s Data area 300 1700 s Program area 70 500 s Data area 140 1000 s 4 Kbyte block 0.12 3.0 s 32 Kbyte block 0.17 3.0 s 64 Kbyte block 0.20 3.0 s Ta = 55C (3) 10 years Notes: 1. Program/erase definition This value represents the number of erasures per block. If the flash memory is programmed/erased n times, each block can be erased n times. i.e. If 4-word write is performed in 512 different addresses in the block A of 4 Kbyte and then the block is erased, it is considered the programming/erasure is performed just once. However a write in the same address more than once for one erasure is disabled. (overwrite disabled). 2. The data retention time includes the periods when the supply voltage is not applied and no clock is provided. 3. Please contact a Renesas sales office regarding data retention time other than the above. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 66 of 99 R32C/111 Group Table 5.9 5. Electrical Characteristics Power Supply Circuit Timing Characteristics (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Symbol td(P-R) Measurement condition Characteristic Value Min. Typ. Max. Internal power supply start-up stabilization time after the main power supply is turned on t d(P-R) Internal power supply start-up stabilization time after the main power supply is turned on VCC1 2 Unit ms Recommended operating voltage t d(P-R) Supply voltage for internal logic PLL oscillatoroutput waveform Figure 5.3 Power Supply Circuit Timing Table 5.10 Electrical Characteristics of Voltage Regulator for Internal Logic (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Symbol VVDC1 Measurement condition Characteristics Min. Output voltage Table 5.11 Symbol Vdet Typ. Unit V Electrical Characteristics of Low Voltage Detector (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Characteristics Measurement condition Value Min. Typ. Detected voltage error -- Max. 1.5 Self-consuming current 0 VCC1 = 5.0 V, low voltage detector enabled Operation start time of low voltage detector REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 67 of 99 Max. 0.3 Vdet(R)-Vdet(F) Hysteresis width td(E-A) Value Unit V V 4 A 150 s R32C/111 Group Table 5.12 5. Electrical Characteristics Electrical Characteristics of Oscillator (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Symbol Measurement condition Characteristics fSO(PLL) PLL clock self-oscillation frequency tLOCK(PLL) PLL lock time (1) tjitter(p-p) PLL jitter period (p-p) f(OCO) On-chip oscillator frequency Value Unit Min. Typ. Max. 35 55 80 MHz 1 ms 2.0 ns 250 kHz 62.5 125 Note: 1. This value is applicable only when the main clock oscillation is stable. Table 5.13 Symbol Electrical Characteristics of Clock Circuitry (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Characteristics Measurement condition Value Min. Typ. Max. Unit trec(STOP) Recovery time from stop mode (1) 225 s trec(WAIT) Recovery time from wait mode to low power mode 225 s Note: 1. This recovery time does not include the period until the main clock oscillator is stabilized. The CPU starts operating before the oscillator is stabilized. Interrupt for exiting stop mode t rec(STOP) Recovery time from stop mode Main clock oscillator output On-chip oscillator output CPU clock t rec(STOP) Interrupt for exiting wait mode t rec(WAIT) Recovery time from wait mode to low power mode Sub clock oscillator output On-chip oscillator output CPU clock t rec(WAIT) Figure 5.4 Clock Circuit Timing REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 68 of 99 R32C/111 Group 5. Electrical Characteristics Timing Requirements (VCC1 = VCC2 = 3.0 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.14 Flash Memory CPU Rewrite Mode Timing Symbol Value Characteristics Min. Max. Unit tcR Read cycle time 200 ns tsu(S-R) Chip-select setup time for read 200 ns th(R-S) Chip-select hold time after read 0 ns tsu(A-R) Address setup time for read 200 ns th(R-A) Address hold time after read 0 ns tw(R) Read pulse width 100 ns tcW Write cycle time 200 ns tsu(S-W) Chip-select setup time for write 0 ns th(W-S) Chip-select hold time after write 30 ns tsu(A-W) Address setup time for write 0 ns th(W-A) Address hold time after write 30 ns tw(W) Write pulse width 50 ns Read cycle t cR t su(S-R) t h(R-S) t su(A-R) t h(R-A) CS0 A23 to A0, BC0 to BC3 t w(R) RD Write cycle t cW t su(S-W) t h(W-S) t su(A-W) t h(W-A) CS0 to CS3 A23 to A0, BC0 to BC3 t w(W) WR Figure 5.5 Flash Memory CPU Rewrite Mode Timing REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 69 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Table 5.15 Electrical Characteristics (1) (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, Ta = Topr, and f(CPU) = 50 MHz, unless otherwise noted) VOH Min. IOH = -5 mA VCC2 -2.0 VCC2 V IOH = -5 mA VCC1 -2.0 VCC1 V P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, IOH = -200 A VCC2 -0.3 P5_0 to P5_7 (1) VCC2 V VCC1 V IOL = 5 mA 2.0 V IOL = 200 A 0.45 V Characteristic High level output voltage Value (2) Measurement condition Symbol P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (1) P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 Typ. Max. Unit (1) P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 IOH = -200 A VCC1 -0.3 (1) VOL Low level output voltage P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (1) P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 (1) Notes: 1. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, and P9_4 are available in the 100-pin package only. 2. The VCC2 pin is available in the 100-pin package only. It should be considered as VCC1 in the 80-/64pin package. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 70 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Table 5.16 Electrical Characteristics (2) (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, Ta = Topr, and f(CPU) = 50 MHz, unless otherwise noted) Symbol Characteristic Value Measurement Unit condition Min. Typ. Max. VT+ - VT- Hysteresis HOLD, RDY, NMI, INT0 to INT5, KI0 to KI3, TA0IN to TA4IN, TA0OUT to TA4OUT, TB0IN to TB5IN, CTS0 to CTS8, CLK0 to CLK8, RXD0 to RXD8, SCL0 to SCL6, SDA0 to SDA6, SS0 to SS6, SRXD0 to SRXD6, ADTRG, IIO0_0 to IIO0_7, IIO1_0 to IIO1_7, UD0A, UD0B, UD1A, UD1B, ISCLK2, ISRXD2, IEIN(1) RESET IIH IIL 0.2 1.0 V 0.2 1.8 V High level XIN, RESET, CNVSS, NSD, input P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, current P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) VI = 5 V 5.0 A XIN, RESET, CNVSS, NSD, P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) VI = 0 V -5.0 A P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) VI = 0 V 170 k Low level input current RPULLUP Pull-up resistor 30 50 RfXIN Feedback XIN resistor 1.5 M RfXCIN Feedback XCIN resistor 15 M Notes: 1. Pins CLK4, RXD4, TXD4, SDA4, SCL4, STXD4, and SRXD4 are available in the 100- and 80-pin package only. Pins TB4IN, CTS4, RTS4, SS4, UART6, and UART7 are available in the 100-pin package only. 2. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, P9_1, and P9_4 are available in the 100-pin package only. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 71 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Table 5.17 Symbol ICC Electrical Characteristics (3) (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Characte ristic Power supply current Measurement condition Value Min. Typ. Max. Unit In single-chip mode, output pins are left open and others are connected to VSS f(CPU) = 50 MHz, f(BCLK) = 25 MHz, f(XIN) = 8 MHz, Active: XIN, PLL, Stopped: XCIN, OCO 32 XIN-XOUT Drive power: low f(CPU) = fSO(PLL)/24 MHz, Active: PLL (self-oscillation), Stopped: XIN, XCIN, OCO 10 mA XCIN-XCOUT Drive power: low f(CPU) = f(BCLK) = f(XIN)/256 MHz, f(XIN) = 8 MHz, Active: XIN, Stopped: PLL, XCIN, OCO 1.2 mA f(CPU) = f(BCLK) = 32.768 kHz, Active: XCIN, Stopped: XIN, PLL, OCO, Main regulator: shutdown 220 A f(CPU) = f(BCLK) = f(OCO)/4 kHz, Active: OCO, Stopped: XIN, PLL, XCIN, Main regulator: shutdown 230 A f(CPU) = f(BCLK) = f(XIN)/256 MHz, f(XIN) = 8 MHz, Active: XIN, Stopped: PLL, XCIN, OCO, Ta = 25C, Wait mode 960 1600 A f(CPU) = f(BCLK) = 32.768 kHz, Active: XCIN, Stopped: XIN, PLL, OCO, Main regulator: shutdown, Ta = 25C, Wait mode 8 140 A f(CPU) = f(BCLK) = f(OCO)/4 kHz, Active: OCO, Stopped: XIN, PLL, XCIN, Main regulator: shutdown, Ta = 25C, Wait mode 10 150 A Stopped: all clocks, Main regulator: shutdown, Ta = 25C 5 70 A REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 72 of 99 45 mA R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Table 5.18 Symbol A/D Conversion Characteristics (VCC1 = VCC2 = AVCC = VREF = 4.2 to 5.5 V, VSS = AVSS = 0 V, Ta = Topr, and f(BCLK) = 25 MHz, unless otherwise noted) Characteristic Measurement condition Value Min. Typ. Max. Unit Resolution VREF = VCC1 10 Bits Absolute error VREF = VCC1 = VCC2 AN_0 to AN_7, AN0_0 to AN0_7, =5V AN2_0 to AN2_7, ANEX0, ANEX1 (1) 3 LSB 7 LSB 3 LSB 7 LSB Differential non-linearity error 1 LSB -- Offset error 3 LSB -- Gain error 3 LSB 20 k -- -- External op-amp connection mode INL Integral non-linearity error VREF = VCC1 = VCC2 AN_0 to AN_7, AN0_0 to AN0_7, =5V AN2_0 to AN2_7, ANEX0, ANEX1 (1) External op-amp connection mode DNL RLADDER Resistor ladder VREF = VCC1 tCONV Conversion time (10 bits) AD = 16 MHz, with sample and hold function 2.06 s AD = 16 MHz, without sample and hold function 3.69 s AD = 16 MHz, with sample and hold function 1.75 s AD = 16 MHz, without sample and hold function 3.06 s AD = 16 MHz 0.188 s tCONV Conversion time (8 bits) tSAMP Sample time VIA Analog input voltage AD Operating clock frequency without sample and hold function with sample and hold function 4 0 VREF V 0.25 16 MHz 1 16 MHz Note: 1. Pins AN0_4 to AN0_7, ANEX0, and ANEX1 are available in the 100- and 80-pin package only. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 73 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Table 5.19 Symbol D/A Conversion Characteristics (VCC1 = VCC2 = AVCC = VREF = 4.2 to 5.5 V, VSS = AVSS = 0 V, and Ta = Topr, unless otherwise noted) Characteristic -- Resolution -- Absolute precision tS Settling time RO Output resistance IVREF Reference input current Measurement condition Value Min. 4 (1) Typ. 10 Max. Unit 8 Bits 1.0 % 3 s 20 k 1.5 mA Note: 1. One D/A converter is used. The DAi register (i = 0, 1) of the other unused converter is set to 00h. The resistor ladder for A/D converter is not considered. Even when the VCUT bit in the AD0CON1 register is set to 0 (VREF disconnected), IVREF is supplied. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 74 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Timing Requirements (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.20 External Clock Input Symbol Value Characteristic Min. Max. 62.5 250 Unit tc(X) External clock input period tw(XH) External clock input high level pulse width 25 ns tw(XL) External clock input low level pulse width 25 ns tr(X) External clock input rise time 5 ns tf(X) External clock input fall time 5 ns tw / tc External clock input duty 60 % Table 5.21 Symbol 40 ns External Bus Timing Characteristic Value Min. Max. Unit tsu(D-R) th(R-D) Data setup time for read 40 ns Data hold time after read 0 ns tdis(R-D) Data disable time after read REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 75 of 99 0.5 x tc(Base) + 10 ns R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Timing Requirements (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.22 Timer A Input (Counting input in event counter mode) Symbol Characteristic Value Min. Max. Unit tc(TA) TAiIN input clock period 200 ns tw(TAH) TAiIN input high level pulse width 80 ns tw(TAL) TAiIN input low level pulse width 80 ns Table 5.23 Timer A Input (Gating input in timer mode) Symbol Characteristic Value Min. Max. Unit tc(TA) TAiIN input clock period 400 ns tw(TAH) TAiIN input high level pulse width 180 ns tw(TAL) TAiIN input low level pulse width 180 ns Table 5.24 Timer A Input (External trigger input in one-shot timer mode) Symbol Characteristic Value Min. Max. Unit tc(TA) TAiIN input clock period 200 ns tw(TAH) TAiIN input high level pulse width 80 ns tw(TAL) TAiIN input low level pulse width 80 ns Table 5.25 Timer A Input (External trigger input in pulse-width modulation mode) Symbol Characteristic Value Min. Max. Unit tw(TAH) TAiIN input high level pulse width 80 ns tw(TAL) TAiIN input low level pulse width 80 ns Table 5.26 Timer A Input (Increment/decrement count switching input in event counter mode) Symbol Characteristic Value Min. Max. Unit tc(UP) TAiOUT input clock period 2000 ns tw(UPH) TAiOUT input high level pulse width 1000 ns tw(UPL) TAiOUT input low level pulse width 1000 ns tsu(UP-TIN) TAiOUT input setup time 400 ns th(TIN-UP) TAiOUT input hold time 400 ns REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 76 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Timing Requirements (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.27 Symbol Timer B Input (Counting input in event counter mode) Characteristic Value Min. Max. Unit tc(TB) TBiIN input clock period (one edge counting) 200 ns tw(TBH) TBiIN input high level pulse width (one edge counting) 80 ns tw(TBL) TBiIN input low level pulse width (one edge counting) 80 ns tc(TB) TBiIN input clock period (both edges counting) 200 ns tw(TBH) TBiIN input high level pulse width (both edges counting) 80 ns tw(TBL) TBiIN input low level pulse width (both edges counting) 80 ns Table 5.28 Symbol Timer B Input (Pulse period measure mode) Characteristic Value Min. Max. Unit tc(TB) TBiIN input clock period 400 ns tw(TBH) TBiIN input high level pulse width 180 ns tw(TBL) TBiIN input low level pulse width 180 ns Table 5.29 Symbol Timer B Input (Pulse-width measure mode) Characteristic Value Min. Max. Unit tc(TB) TBiIN input clock period 400 ns tw(TBH) TBiIN input high level pulse width 180 ns tw(TBL) TBiIN input low level pulse width 180 ns REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 77 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Timing requirements (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.30 Serial Interface Symbol Characteristic Value Min. Max. Unit tc(CK) CLKi input clock period 200 ns tw(CKH) CLKi input high level pulse width 80 ns tw(CKL) CLKi input low level pulse width 80 ns tsu(D-C) RXDi input setup time 80 ns th(C-D) RXDi input hold time 90 ns Table 5.31 A/D Trigger Input Symbol Characteristic Value Min. Max. Unit tw(ADH) ADTRG input high level pulse width Hardware trigger input high level pulse width 3-------- AD ns tw(ADL) ADTRG input low level pulse width Hardware trigger input high level pulse width 125 ns Table 5.32 External Interrupt INTi Input Symbol INTi input high level pulse width tw(INH) INTi input low level pulse width tw(INL) Table 5.33 Value Characteristic Min. Max. Unit Edge sensitive 250 ns Level sensitive tc(CPU) + 200 ns Edge sensitive 250 ns Level sensitive tc(CPU) + 200 ns Intelligent I/O Symbol Characteristic Value Min. Max. Unit tc(ISCLK2) ISCLK2 input clock period 600 ns tw(ISCLK2H) ISCLK2 input high level pulse width 270 ns tw(ISCLK2L) ISCLK2 input low level pulse width 270 ns tsu(RXD-ISCLK2) ISRXD2 input setup time 150 ns th(ISCLK2-RXD) ISRXD2 input hold time 100 ns REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 78 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Switching Characteristics (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.34 Symbol External Bus Timing (Separate bus) Characteristic Measurement condition Value Min. Max. Unit tsu(S-R) Chip-select setup time for read (1) ns th(R-S) Chip-select hold time after read tc(Base) - 10 ns tsu(A-R) Address setup time for read (1) ns th(R-A) Address hold time after read tc(Base) - 10 ns tw(R) Read pulse width (1) ns tsu(S-W) Chip-select setup time for write (1) ns th(W-S) Chip-select hold time after write 1.5 x tc(Base) - 10 ns tsu(A-W) Address setup time for write (1) ns th(W-A) Address hold time after write 1.5 x tc(Base) - 10 ns tw(W) Write pulse width (1) ns tsu(D-W) Data setup time for write (1) ns th(W-D) Data hold time after write 0 ns Refer to Figure 5.6 Note: 1. The value is calculated by the following formulas based on the base clock cycles (tc(Base)) and respective cycles of Tsu(A-R), Tw(R), Tsu(A-W), and Tw(W) set by registers EBC0 to EBC3. If the calculation results in a negative value, modify the value to be set. For the details of how to set values, refer to the Hardware manual. tsu(S-R) = tsu(A-R) = Tsu(A-R) x tc(Base) - 15 [ns] tw(R) = Tw(R) x tc(Base) - 10 [ns] tsu(S-W) = tsu(A-W) = Tsu(A-W) x tc(Base) - 15 [ns] tw(W) = tsu(D-W) = Tw(W) x tc(Base) - 10 [ns] REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 79 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Switching Characteristics (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, Ta = Topr, and unless otherwise noted) Table 5.35 Symbol External Bus Timing (Multiplexed bus) Characteristic Measurement condition Value Min. Max. Unit tsu(S-ALE) Chip-select setup time for ALE (1) ns th(R-S) Chip-select hold time after read 1.5 x tc(Base) - 10 ns tsu(A-ALE) Address setup time for ALE (1) ns th(ALE-A) Address hold time after ALE 0.5 x tc(Base) - 5 ns th(R-A) Address hold time after read 1.5 x tc(Base) - 10 ns td(ALE-R) ALE-read delay time tw(ALE) ALE pulse width tdis(R-A) Address disable time after read tw(R) Read pulse width th(W-S) 0.5 x tc(Base) - 5 0.5 x tc(Base) + 10 ns (1) Refer to Figure 5.6 ns 8 ns (1) ns Chip-select hold time after write 1.5 x tc(Base) - 10 ns th(W-A) Address hold time after write 1.5 x tc(Base) - 10 ns td(ALE-W) ALE-write delay time tw(W) Write pulse width (1) ns tsu(D-W) Data setup time for write (1) ns th(W-D) Data hold time after write 0.5 x tc(Base) ns 0.5 x tc(Base) - 5 0.5 x tc(Base) + 10 ns Note: 1. The value is calculated by the following formulas based on the base clock cycles (tc(Base)) and respective cycles of Tsu(A-R), Tw(R), Tsu(A-W), and Tw(W) set by registers EBC0 to EBC3. If the calculation results in a negative value, modify the value to be set. For the details of how to set values, refer to the Hardware manual. tsu(S-ALE) = tsu(A-ALE) = tw(ALE) = (Tsu(A-R) - 0.5) x tc(Base) -15 [ns] tw(R) = Tw(R) x tc(Base) -10 [ns] tw(W) = tsu(D-W) = Tw(W) x tc(Base) -10 [ns] REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 80 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 5 V Switching Characteristics (VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.36 Serial Interface Symbol Characteristic td(C-Q) TXDi output delay time th(C-Q) TXDi output hold time Table 5.37 Symbol Measurement condition Refer to Figure 5.6 Value Min. Max. 80 0 Unit ns ns Intelligent I/O Characteristic td(ISCLK2-TXD) ISTXD2 output delay time th(ISCLK2-RXD) ISTXD2 output hold time REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 81 of 99 Value Min. Max. 180 0 Unit ns ns R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Table 5.38 Electrical Characteristics (1) (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, Ta = Topr, and f(CPU) = 50 MHz, unless otherwise noted) Symbol VOH Characteristic High level output voltage P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7 (1) P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 Measurement condition Low level output voltage P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_3 to P9_7, P10_0 to P10_7 Min. Typ. Max. Unit IOH = -1 mA VCC2 0.6 VCC2 V IOH = -1 mA VCC1 0.6 VCC1 V 0.5 V (1) VOL Value (2) IOL = 1 mA (1) Notes: 1. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, and P9_4 are available in the 100-pin package only. 2. The VCC2 pin is available in the 100-pin package only. It should be considered as VCC1 in the 80-/64pin package. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 82 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Table 5.39 Symbol Electrical Characteristics (2) (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, Ta = Topr, and f(CPU) = 50 MHz, unless otherwise noted) Characteristic VT+ - VT- Hysteresis HOLD, RDY, NMI, INT0 to INT5, KI0 to KI3, TA0IN to TA4IN, TA0OUT to TA4OUT, TB0IN to TB5IN, CTS0 to CTS8, CLK0 to CLK8, RXD0 to RXD8, SCL0 to SCL6, SDA0 to SDA6, SS0 to SS6, SRXD0 to SRXD6, ADTRG, IIO0_0 to IIO0_7, IIO1_0 to IIO1_7, UD0A, UD0B, UD1A, UD1B, ISCLK2, ISRXD2, IEIN(1) RESET High level XIN, RESET, CNVSS, NSD, IIH input P0_0 to P0_7, P1_0 to P1_7, current P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) Low level XIN, RESET, CNVSS, NSD, IIL input P0_0 to P0_7, P1_0 to P1_7, current P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) P0_0 to P0_7, P1_0 to P1_7, RPULLUP Pull-up resistor P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_1, P9_3 to P9_7, P10_0 to P10_7 (2) RfXIN Feedback XIN resistor RfXCIN Feedback XCIN resistor Value Measurement Unit condition Min. Typ. Max. 0.2 1.0 V 0.2 1.8 V VI = 3.3 V 4.0 A VI = 0 V -4.0 A 500 k VI = 0 V 50 100 3 M 25 M Notes: 1. Pins CLK4, RXD4, TXD4, SDA4, SCL4, STXD4, and SRXD4 are available in the 100- and 80-pin package only. Pins TB4IN, CTS4, RTS4, SS4, UART6, and UART7 are available in the 100-pin package only. 2. Ports P0_4 to P0_7, P1_0 to P1_4, P3_4 to P3_7, and P9_5 to P9_7 are available in the 100- and 80-pin packages. Ports P4, P5, P9_1, and P9_4 are available in the 100-pin package only. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 83 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Table 5.40 Symbol ICC Electrical Characteristics (3) (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Characte ristic Power supply current Measurement condition Value Min. Typ. Max. Unit In single-chip mode, output pins are left open and others are connected to VSS f(CPU) = 50 MHz, f(BCLK) = 25 MHz, f(XIN) = 8 MHz, Active: XIN, PLL, Stopped: XCIN, OCO 28 XIN-XOUT Drive power: low f(CPU) = fSO(PLL)/24 MHz, Active: PLL (self-oscillation), Stopped: XIN, XCIN, OCO 7 mA f(CPU) = f(BCLK) = f(XIN)/256 MHz, f(XIN) = 8 MHz, Active: XIN, Stopped: PLL, XCIN, OCO 670 A f(CPU) = f(BCLK) = 32.768 kHz, Active: XCIN, Stopped: XIN, PLL, OCO, Main regulator: shutdown 180 A f(CPU) = f(BCLK) = f(OCO)/4 kHz, Active: OCO, Stopped: XIN, PLL, XCIN, Main regulator: shutdown 190 A f(CPU) = f(BCLK) = f(XIN)/256 MHz, f(XIN) = 8 MHz, Active: XIN, Stopped: PLL, XCIN, OCO, Ta = 25C, Wait mode 500 900 A f(CPU) = f(BCLK) = 32.768 kHz, Active: XCIN, Stopped: XIN, PLL, OCO, Main regulator: shutdown, Ta = 25C, Wait mode 8 140 A f(CPU) = f(BCLK) = f(OCO)/4 kHz, Active: OCO, Stopped: XIN, PLL, XCIN, Main regulator: shutdown, Ta = 25C, Wait mode 10 150 A Stopped: all clocks, Main regulator: shutdown, Ta = 25C 5 70 A XCIN-XCOUT Drive power: low REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 84 of 99 40 mA R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Table 5.41 Symbol -- A/D Conversion Characteristics (VCC1 = VCC2 = AVCC = VREF = 3.0 to 3.6 V, VSS = AVSS = 0 V, Ta = Topr, and f(BCLK) = 25 MHz, unless otherwise noted) Characteristic Measurement condition Resolution VREF = VCC1 Absolute error VREF = VCC1 = VCC2 = 3.3 V -- INL Integral non-linearity error DNL Differential nonlinearity error VREF = VCC1 = VCC2 = 3.3 V Value Min. Typ. Max. Unit 10 Bits AN_0 to AN_7, AN0_0 to AN0_7, AN2_0 to AN2_7, ANEX0, ANEX1 (1) 5 LSB External op-amp connection mode 7 LSB AN_0 to AN_7, AN0_0 to AN0_7, AN2_0 to AN2_7, ANEX0, ANEX1 (1) 5 LSB External op-amp connection mode 7 LSB 1 LSB VREF = VCC1 = VCC2 = 3.3 V -- Offset error 3 LSB -- Gain error 3 LSB 20 k RLADDER Resistor ladder VREF = VCC1 tCONV Conversion time (10 bits) AD = 10 MHz, with sample and hold function 3.3 s tCONV Conversion time (8 bits) AD = 10 MHz, with sample and hold function 2.8 s tSAMP Sampling time AD = 10 MHz 0.3 s VIA Analog input voltage AD Operating clock frequency without sample and hold function with sample and hold function 4 0 VREF V 0.25 10 MHz 1 10 MHz Note: 1. Pins AN0_4 to AN0_7, ANEX0, and ANEX1 are available in the 100- and 80-pin package only. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 85 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Table 5.42 Symbol D/A Conversion Characteristics (VCC1 = VCC2 = AVCC = VREF = 3.0 to 3.6 V, VSS = AVSS = 0 V, and Ta = Topr, unless otherwise noted) Characteristic -- Resolution -- Absolute precision tS Settling time RO Output resistance IVREF Reference input current Measurement condition Value Min. 4 (1) Typ. 10 Max. Unit 8 Bits 1.0 % 3 s 20 k 1.0 mA Note: 1. One D/A converter is used. The DAi register (i = 0, 1) of the other unused converter is set to 00h. The resistor ladder for A/D converter is not considered. Even when the VCUT bit in the AD0CON1 register is set to 0 (VREF disconnected), IVREF is supplied. REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 86 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Timing Requirements (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.43 External Clock Input Symbol Value Characteristic Min. Max. 62.5 250 Unit tc(X) External clock input period tw(XH) External clock input high level pulse width 25 ns tw(XL) External clock input low level pulse width 25 ns tr(X) External clock input rise time 5 ns tf(X) External clock input fall time 5 ns tw / tc External clock input duty 60 % Table 5.44 Symbol 40 ns External Bus Timing Characteristic Value Min. Max. Unit tsu(D-R) Data setup time for read 40 ns th(R-D) Data hold time after read 0 ns tdis(R-D) Data disable time after read REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 87 of 99 0.5 x tc(Base) + 10 ns R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Timing Requirements (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.45 Timer A Input (Counting input in event counter mode) Symbol Characteristic Value Min. Max. Unit tc(TA) TAiIN input clock period 200 ns tw(TAH) TAiIN input high level pulse width 80 ns tw(TAL) TAiIN input low level pulse width 80 ns Table 5.46 Timer A Input (Gating input in timer mode) Symbol Characteristic Value Min. Max. Unit tc(TA) TAiIN input clock period 400 ns tw(TAH) TAiIN input high level pulse width 180 ns tw(TAL) TAiIN input low level pulse width 180 ns Table 5.47 Timer A Input (External trigger input in one-shot timer mode) Symbol Characteristic Value Min. Max. Unit tc(TA) TAiIN input clock period 200 ns tw(TAH) TAiIN input high level pulse width 80 ns tw(TAL) TAiIN input low level pulse width 80 ns Table 5.48 Timer A Input (External trigger input in pulse-width modulation mode) Symbol Characteristic Value Min. Max. Unit tw(TAH) TAiIN input high level pulse width 80 ns tw(TAL) TAiIN input low level pulse width 80 ns Table 5.49 Timer A Input (Increment/decrement count switching input in event counter mode) Symbol Characteristic Value Min. Max. Unit tc(UP) TAiOUT input clock period 2000 ns tw(UPH) TAiOUT input high level pulse width 1000 ns tw(UPL) TAiOUT input low level pulse width 1000 ns tsu(UP-TIN) TAiOUT input setup time 400 ns th(TIN-UP) TAiOUT input hold time 400 ns REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 88 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Timing Requirements (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.50 Symbol Timer B Input (Counting input in event counter mode) Characteristic Value Min. Max. Unit tc(TB) TBiIN input clock period (one edge counting) 200 ns tw(TBH) TBiIN input high level pulse width (one edge counting) 80 ns tw(TBL) TBiIN input low level pulse width (one edge counting) 80 ns tc(TB) TBiIN input clock period (both edges counting) 200 ns tw(TBH) TBiIN input high level pulse width (both edges counting) 80 ns tw(TBL) TBiIN input low level pulse width (both edges counting) 80 ns Table 5.51 Symbol Timer B Input (Pulse period measure mode) Characteristic Value Min. Max. Unit tc(TB) TBiIN input clock period 400 ns tw(TBH) TBiIN input high level pulse width 180 ns tw(TBL) TBiIN input low level pulse width 180 ns Table 5.52 Symbol Timer B Input (Pulse-width measure mode) Characteristic Value Min. Max. Unit tc(TB) TBiIN input clock period 400 ns tw(TBH) TBiIN input high level pulse width 180 ns tw(TBL) TBiIN input low level pulse width 180 ns REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 89 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Timing Requirements (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.53 Serial Interface Symbol Characteristic Value Min. Max. Unit tc(CK) CLKi input clock period 200 ns tw(CKH) CLKi input high level pulse width 80 ns tw(CKL) CLKi input low level pulse width 80 ns tsu(D-C) RXDi input setup time 80 ns th(C-D) RXDi input hold time 90 ns Table 5.54 A/D Trigger Input Symbol Characteristic Value Min. Max. Unit tw(ADH) ADTRG input high level pulse width Hardware trigger input high level pulse width 3-------- AD ns tw(ADL) ADTRG input low level pulse width Hardware trigger input high level pulse width 125 ns Table 5.55 External Interrupt INTi Input Symbol tw(INH) tw(INL) Table 5.56 Value Characteristic INTi input high level pulse width INTi input low level pulse width Min. Max. Unit Edge sensitive 250 ns Level sensitive tc(CPU) + 200 ns Edge sensitive 250 ns Level sensitive tc(CPU) + 200 ns Intelligent I/O Symbol Characteristic Value Min. Max. Unit tc(ISCLK2) ISCLK2 input clock period 600 ns tw(ISCLK2H) ISCLK2 input high level pulse width 270 ns tw(ISCLK2L) ISCLK2 input low level pulse width 270 ns 150 ns 100 ns tsu(RXD-ISCLK2) ISRXD2 input setup time th(ISCLK2-RXD) ISRXD2 input hold time REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 90 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Switching Characteristics (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.57 Symbol External Bus Timing (Separate bus) Characteristic Measurement condition Value Min. Max. Unit tsu(S-R) Chip-select setup time for read (1) ns th(R-S) Chip-select hold time after read tc(Base) - 10 ns tsu(A-R) Address setup time for read (1) ns th(R-A) Address hold time after read tc(Base) - 10 ns tw(R) Read pulse width (1) ns tsu(S-W) Chip-select setup time for write (1) ns th(W-S) Chip-select hold time after write 1.5 x tc(Base) - 10 ns tsu(A-W) Address setup time for write (1) ns th(W-A) Address hold time after write 1.5 x tc(Base) - 10 ns tw(W) Write pulse width (1) ns tsu(D-W) Data setup time for write (1) ns th(W-D) Data hold time after write 0 ns Refer to Figure 5.6 Note: 1. The value is calculated by the following formulas based on the base clock cycles (tc(Base)) and respective cycles of Tsu(A-R), Tw(R), Tsu(A-W), and Tw(W) set by registers EBC0 to EBC3. If the calculation results in a negative value, modify the value to be set. For the details of how to set values, refer to the Hardware manual. tsu(S-R) = tsu(A-R) = Tsu(A-R) x tc(Base) - 15 [ns] tw(R) = Tw(R) x tc(Base) - 10 [ns] tsu(S-W) = tsu(A-W) = Tsu(A-W) x tc(Base) - 15 [ns] tw(W) = tsu(D-W) = Tw(W) x tc(Base) - 10 [ns] REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 91 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Switching Characteristics (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.58 Symbol External Bus Timing (Multiplexed bus) Characteristic Measurement condition Value Min. Max. Unit tsu(S-ALE) Chip-select setup time for ALE (1) ns th(R-S) Chip-select hold time after read 1.5 x tc(Base) - 10 ns tsu(A-ALE) Address setup time for ALE (1) ns th(ALE-A) Address hold time after ALE 0.5 x tc(Base) - 5 ns th(R-A) Address hold time after read 1.5 x tc(Base) - 10 ns td(ALE-R) ALE-read delay time 0.5 x tc(Base) - 5 0.5 x tc(Base) + 10 ns tw(ALE) ALE pulse width tdis(R-A) Address disable time after read tw(R) Read pulse width th(W-S) (1) Refer to Figure 5.6 ns 8 ns (1) ns Chip-select hold time after write 1.5 x tc(Base) - 10 ns th(W-A) Address hold time after write 1.5 x tc(Base) - 10 ns td(ALE-W) ALE-write delay time 0.5 x tc(Base) - 5 0.5 x tc(Base) + 10 ns tw(W) Write pulse width (1) ns tsu(D-W) Data setup time for write (1) ns th(W-D) Data hold time after write 0.5 x tc(Base) ns Note: 1. The value is calculated by the following formulas based on the base clock cycles (tc(Base)) and respective cycles of Tsu(A-R), Tw(R), Tsu(A-W), and Tw(W) set by registers EBC0 to EBC3. If the calculation results in a negative value, modify the value to be set. For the details of how to set values, refer to the Hardware manual. tsu(S-ALE) = tsu(A-ALE) = tw(ALE) = (Tsu(A-R) - 0.5) x tc(Base) -15 [ns] tw(R) = Tw(R) x tc(Base) -10 [ns] tw(W) = tsu(D-W) = Tw(W) x tc(Base) -10 [ns] REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 92 of 99 R32C/111 Group 5. Electrical Characteristics VCC1 = VCC2 = 3.3 V Switching Characteristics (VCC1 = VCC2 = 3.0 to 3.6 V, VSS = 0 V, and Ta = Topr, unless otherwise noted) Table 5.59 Serial Interface Symbol Characteristic td(C-Q) TXDi output delay time th(C-Q) TXDi output hold time Table 5.60 Intelligent I/O Symbol Measurement condition Refer to Figure 5.6 Characteristic td(ISCLK2-TXD) ISTXD2 output delay time th(ISCLK2-RXD) ISTXD2 output hold time REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 93 of 99 Value Min. Max. 80 0 ns ns Value Min. Max. 180 0 Unit Unit ns ns R32C/111 Group 5. Electrical Characteristics MCU Pin to be measured Figure 5.6 30 pF Switching Characteristic Measurement Circuit t c(X) XIN t w(XH) t r(X) Figure 5.7 External Clock Input Timing REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 94 of 99 t w(XL) t f(X) R32C/111 Group 5. Electrical Characteristics External bus timing (Separate bus) Read cycle t cR t su(S-R) t h(R-S) t su(A-R) t h(R-A) CS0 to CS3 A23 to A0, BC0 and BC1 t w(R) RD t su(D-R) t h(R-D) D15 to D0 Write cycle t cW t su(S-W) t h(W-S) t su(A-W) t h(W-A) CS0 to CS3 A23 to A0, BC0 and BC1 t w(W) WR, WR0 and WR1 t su(D-W) t h(W-D) D15 to D0 Measurement conditions Item Figure 5.8 VCC1 = VCC2 = 4.2 to 5.5 V VCC1 = VCC2 = 3.0 to 3.6 V Criterion for input voltage VIH 2.5 V 1.5 V VIL 0.8 V 0.5 V Criterion for output voltage VOH 2.0 V 2.4 V VOL 0.8 V 0.5 V External Bus Timing (Separate Bus) REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 95 of 99 R32C/111 Group 5. Electrical Characteristics External bus timing (Multiplexed bus) Read cycle t cR t su(S-ALE) t h(R-S) t su(A-ALE) t h(R-A) CS0 to CS3 A23 to A8, BC0 and BC1 t w(ALE) t h(ALE-A) ALE t su(A-ALE) A15/D15 to A0/D0, BC0/D0 t dis(R-A) t su(D-R) Address t h(R-D) Data t d(ALE-R) t w(R) t dis(R-D) RD t su(D-R) t h(R-D) D15 to D8 Write cycle t cW t su(S-ALE) t h(W-S) t su(A-ALE) t h(W-A) CS0 to CS3 A23 to A8, BC0 and BC1 t w(ALE) ALE t su(A-ALE) A15/D15 to A0/D0, BC0/D0 t h(ALE-A) t su(D-W) Address t d(ALE-W) t h(W-D) Data t w(W) WR, WR0 and WR1 t su(D-W) t h(W-D) D15 to D8 Measurement conditions Item Figure 5.9 VCC1 = VCC2 = 4.2 to 5.5 V VCC1 = VCC2 = 3.0 to 3.6 V Criterion for input voltage VIH 2.5 V 1.5 V VIL 0.8 V 0.5 V Criterion for output voltage VOH 2.0 V 2.4 V VOL 0.8 V 0.5 V External Bus Timing (Multiplexed Bus) REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 96 of 99 R32C/111 Group 5. Electrical Characteristics t c(TA) t w(TAH) t w(TAL) TAiIN input t c(UP) t w(UPH) t w(UPL) TAiOUT input In event counter mode TAiOUT input (input for increment/ decrement count switching) t su(UP-TIN) t h(TIN-UP) TAiIN input (in falling edge counting) TAiIN input (in rising edge counting) t c(TB) t w(TBH) t w(TBL) TBiIN input t c(CK) t w(CKH) t w(CKL) CLKi t d(C-Q) t h(C-Q) TXDi t su(D-C) t h(C-D) RXDi t w(ADL) t w(ADH) t w(INL) t w(INH) ADTRG input INTi input 2 CPU clock cycles + 300 ns or more NMI input Figure 5.10 Timing of Peripheral Functions REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 97 of 99 2 CPU clock cycles + 300 ns or more R32C/111 Group Appendix 1. Package Dimensions Appendix 1. Package Dimensions JEITA Package Code P-LQFP100-14x14-0.50 RENESAS Code PLQP0100KB-A Previous Code 100P6Q-A / FP-100U / FP-100UV MASS[Typ.] 0.6g HD *1 D 51 75 NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. 50 76 bp c1 Reference Symbol c E *2 HE b1 D E A2 HD HE A A1 bp b1 c c1 100 26 1 ZE Terminal cross section 25 Index mark ZD y *3 e bp A1 c A A2 F e x y ZD ZE L L1 L x L1 Detail F JEITA Package Code P-TFLGA100-5.5x5.5-0.5 RENESAS Code PTLG0100KA-A Min Nom Max 13.9 14.0 14.1 13.9 14.0 14.1 1.4 15.8 16.0 16.2 15.8 16.0 16.2 1.7 0.05 0.1 0.15 0.15 0.20 0.25 0.18 0.09 0.145 0.20 0.125 0 8 0.5 0.08 0.08 1.0 1.0 0.35 0.5 0.65 1.0 MASS[Typ.] 0.1g b1 S w S A w S B D Previous Code 100F0M Dimension in Millimeters AB b ZD A S AB e A e K J H G B E F E D C B ZE A y S x4 v 1 2 3 Index mark (Laser mark) REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 98 of 99 S Index mark 4 5 6 7 8 9 10 Reference Symbol D E v w A e b b1 x y ZD ZE Dimension in Millimeters Min Nom Max 5.5 5.5 0.15 0.20 1.05 0.5 0.21 0.25 0.29 0.29 0.34 0.39 0.08 0.10 0.5 0.5 R32C/111 Group Appendix 1. Package Dimensions JEITA Package Code P-LQFP80-12x12-0.50 RENESAS Code PLQP0080KB-A Previous Code 80P6Q-A MASS[Typ.] 0.5g HD *1 D 60 41 NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. 40 61 bp E c *2 HE c1 b1 Reference Dimension in Millimeters Symbol ZE Terminal cross section 80 21 1 20 ZD Index mark A1 *3 c A y bp e A2 F L x L1 Detail F JEITA Package Code P-LQFP64-10x10-0.50 RENESAS Code PLQP0064KB-A Previous Code 64P6Q-A / FP-64K / FP-64KV D E A2 HD HE A A1 bp b1 c c1 e x y ZD ZE L L1 Min Nom Max 11.9 12.0 12.1 11.9 12.0 12.1 1.4 13.8 14.0 14.2 13.8 14.0 14.2 1.7 0.1 0.2 0 0.15 0.20 0.25 0.18 0.09 0.145 0.20 0.125 0 10 0.5 0.08 0.08 1.25 1.25 0.3 0.5 0.7 1.0 MASS[Typ.] 0.3g HD *1 D 48 33 49 NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. 32 bp 64 1 c1 Terminal cross section ZE 17 Reference Symbol c E *2 HE b1 16 Index mark ZD c A *3 A1 y e A2 F bp L x L1 Detail F REJ03B0227-0110 Rev.1.10 Sep 17, 2009 Page 99 of 99 D E A2 HD HE A A1 bp b1 c c1 e x y ZD ZE L L1 Dimension in Millimeters Min Nom Max 9.9 10.0 10.1 9.9 10.0 10.1 1.4 11.8 12.0 12.2 11.8 12.0 12.2 1.7 0.05 0.1 0.15 0.15 0.20 0.25 0.18 0.09 0.145 0.20 0.125 0 8 0.5 0.08 0.08 1.25 1.25 0.35 0.5 0.65 1.0 REVISION HISTORY Rev. 0.03 0.30 Date Oct 17, 2007 Aug 19, 2008 Page -- -- -- 1 2 3 4 6 7 8 11 12 13, 14 -- 15 R32C/111 Group Datasheet Description Summary Initial release Second edition released The manual in general * Maximum operating frequency changed from 48 MHz to 50 MHz * Specification of on-chip oscillator disclosed * Microprocessor mode becomes optional * "memory-expanded mode" changed to "memory expansion mode" Chapter 1 * "(MCUs)" added to line 1 of 1.1 * Applications in 1.1.1 revised and modified * "Attention Users" below 1.1.1 modified to "Notes to users"; "The specification" in this box changed to "Specifications" * "instructions" in "CPU" of Table 1.1 deleted * Minimum instruction execution time in "CPU" of Table 1.1 changed * Microprocessor mode in CPU" of Table 1.1 changed to optional * "TBD" for "Voltage Detection" in Table 1.1 deleted * "3 circuits" for "Clock" in Table 1.1 changed to "4 circuits" * "Total interrupt vectors" in Table 1.1 changed to "Interrupt vectors" * Trigger sources" for DMA in Table 1.1 modified to "Request sources"; Request sources for "DMA" defined as 51 * Scribal error: "peripheral interrupt sources" for "DMACII" in Table 1.1 corrected to "peripheral interrupt source" * Unit names in Table 1.2 sorted in chapter order * Description for "A/D Converter" in Table 1.2 changed * "Operating frequency" in Table 1.2 changed from "48 MHz" to "50 MHz" * "version N" and "version D" added to "Operating Temperature" in Table 1.2; "optional" deleted * Values for "Current Consumption" in Table 1.2 added * "version N" and "version D" added to Table 1.3 * All "version N"s in Table 1.3 become on planning phase * Figure 1.2 modified * Note 2 for Figure 1.3 modified * Scribal error: "CLK5/" (pin No. 21) in Table 1.4 corrected to "CLK5" * Description for "Connecting pins for decoupling capacitor", "CNVSS", and "Debug port" in Table 1.7 modified * Some descriptions for "WR0/WR1/WR/BC0/BC1/RD" of "Bus control pins" in Table 1.8 modified * Functional category items in Tables 1.9 and 1.10 sorted in chapter order; Descriptions modified Chapter 2 * Descriptions for this chapter modified; Expression "DMAC-related registers"s modified to "DMAC-associated registers"s * "Data register" and "Address register" in Figure 2.1 pluralized; Explanation in Notes 1 and 2 for this figure revised A- 1 REVISION HISTORY Rev. Date Page 15, 16 18 19 20 21, 22 22 25 32 38 43 -- 1.10 Sep 17, 2009 81 -- -- 1 2 3 4-7 R32C/111 Group Datasheet Description Summary * "Interrupt table register" in Figure 2.1 and 2.1.6 changed to "Interrupt vector table base register" * Scribal error: "24 bit" in 2.2.2 corrected to "32 bit" Chapter 3 * Descriptions for this chapter and Figure 3.1 modified Chapter 4 * "(SFR)" of chapter title changed to "(SFRs)" * Description for initial paragraph of Chapter 4 modified * Reset value for CCR and PBC in Table 4.1 changed * "UARTi Bus Collision Detection Interrupt Control Register" (i = 0 to 6) in Tables 4.2 and 4.3 changed to "UARTi Bus Collision, Start/Stop Condition Detection Interrupt Control Register" * "DMAi interrupt" in Tables 4.2 and 4.3 changed to "DMAi transfer complete interrupt" * Reset value for IIO3IR and IIO8IR to IIO11R in Table 4.3 modified * Scribal error: address "00010Fh" added to Table 4.6 * "Upward/Downward Counting Select Register" in Table 4.13 changed to "Increment/Decrement Counting Select Register" * CSOP2 for address 040056h in Table 4.19 deleted * Reset value for CM3 in Table 4.19 changed * "DMAi Source Select Register i" in Table 4.24 changed to "DMAi Request Source Select Register i" Chapter 5 * This chapter newly added Appendix 1 * "Package Dimension" as title changed to "Package Dimensions" Third edition released The manual in general * Added 100-pin plastic molded LGA and 80- and 64-pin plastic molded LQFP packages * When new tables/figures are added for 80-/64-pin packages, add the following description: "(for the 100-pin package)" to the title of corresponding current tables/figures Chapter 1. Overview * Added description for 100-pin LGA and 80-/64-pin packages to lines 12 and 13 of 1.1; Added description "a maximum of" to "nine channels of serial interface"; Deleted the whole description of "Notes to users" * Changed minimum RAM size "40" in Table 1.1, to "32" * Modified description for "External Bus Expansion", to Table 1.1; Moved this unit below "Clock" * Added "(optional)" for IEBus mode for "Intelligent I/O" in Table 1.2 * Modified description for "Flash memory" in Tables 1.2 * Added "100-pin plastic molded TFLGA (PTLG0100KA-A)" to Table 1.2 * Added Tables 1.3 to 1.6 to provide specifications for 80-/64-pin packages A- 2 REVISION HISTORY Rev. Date Page 8 9 11, 12, 14, 18, 21 13 15-17 19, 20, 22, 23 24 25 26 28-30 -- 33 35 36 R32C/111 Group Datasheet Description Summary * Completed "under development" phase of part numbers R5F64110DFB, R5F64111DFB, R5F64112DFB, R5F64114DFB, R5F64115DFB, and R5F64116DFB in Table 1.7 * Added product information for 100-pin LGA and 80-/64-pin packages to Table 1.7 * Added product information for 100-pin LGA and 80-/64-pin packages, and 32-Kbyte RAM to Figure 1.1 * Deleted hyphenation for part number in Figure 1.1 * Added Figures 1.3, 1.4, and 1.6 to 1.8 to provide block diagrams and pin assignment for 100-pin LGA and 80-/64-pin packages * Changed the order of Notes in Figures 1.5 * Added pin No. for 100-pin LGA package to Tables 1.8 to 1.10 * Added Tables 1.11 to 1.14 to provide pin characteristics for 80-/64-pin packages. * Changed the following expression: "A ceramic resonator or a crystal oscillator" for "Main clock input/output" in Table 1.15, to "A crystal, or a ceramic resonator" * Modified descriptions for HLDA and RDY of "Bus control pins" in Table 1.16 * Changed the following expression: "selected" for "Input port" in Table 1.17, to "selectable" * Modified description "TXD2" for TXD0 to TXD8 of "Serial interface" in Table 1.17, to "TXD2 output" * Added Tables 1.19 to 1.21 to provide pin definitions and functions for 80-/64-pin packages Chapter 2. CPU * Made major text modifications to this chapter * Changed the following expression: "a requested interrupt's priority level" in line 2 of 2.1.8.11, to "the interrupt request level" Chapter 3. Memory * Made major text modifications to this chapter * Changed RAM size "40" in line 7 of this chapter, to "63", and address "0000A3FFh" in line 8, to "0000FFFFh" * Added descriptions for 32-Kbyte RAM and 128-Kbyte ROM to Figure 3.1 * Changed two "can be"s in Notes 3 and 4 of Figure 3.1, to "becomes"s Chapter 4. SFRs * Changed hexadecimal format of reset values for registers CCR and FMCR in Table 4.1, to binary * Added FEBC3 register to addresses 000010h-000011h in Table 4.1 * Changed FEBC register for addresses 00001Ch-00001Dh, to FEBC0 in Table 4.1 * Modified the following register name in Table 4.1: "Chip-select Boundary (between n and n + 1) Setting Register", to "Chip-select n and n + 1 Boundary Setting Register" A- 3 REVISION HISTORY Rev. Date Page 37, 38 45 46 51 54 55 55-57 59 60 61 62 63 65 66 R32C/111 Group Datasheet Description Summary * Changed register names associated with "Start/Stop Condition" for BCNiIC in Tables 4.2 and 4.3, to "Start Condition/Stop Condition" * Modified reset values "XXXX XXXXb" and "XXXX 000Xb" for registers U7RB and U8RB in Table 4.10, to "XXXXh" * Changed expression of register name "Xi Register Yi Register" (i = 0 to 15) and register symbol "XiR, YiR" in Table 4.11, to "Xi Register/Yi Register" and "XiR/YiR", respectively * Changed hexadecimal format of reset values for PDi in Table 4.16, to binary * Modified Note 1 in Table 4.19 * Merged addresses 40090h to 40093h in Table 4.20, into previous page * Modified reset values for IFS0 and IFS2 in Table 4.20; Added Notes 1 to 3 for 80-/64-pin packages and IFS7 register * Modified the following register name in Tables 4.20 to 4.22: "Port Pi_j Port Function Select Register", to "Port Pi_j Function Select Register" * Modified register name "DMAi Request Source Select Register 1" in Table 4.24, to "DMAi Request Source Select Register" * Changed register names "Wake-up Interrupt Priority Level Control Register 2" and "Wake-up Interrupt Priority Level Control Register 1" in Table 4.24, to "Wake-up IPL Setting Register 2" and "Wake-up IPL Setting Register 1", respectively Chapter 5. Electrical Characteristics * Added Notes 2 and 3 for 80-/64-pin packages to Table 5.1 * Added specification of "dVCC1/dt" to Table 5.2; Added Notes 2, 4, and 5 for 80-/64-pin packages * Added Note 2 for Table 5.3 * Added Note 3 for 80-/64-pin packages to Table 5.4 * Modified description "VCC"s in Table 5.6, to "VCC1"s and "VCC2"s * Added Table 5.7 to provide RAM electrical characteristics * Deleted specification of "tPS" from Table 5.8 67 * Deleted measurement condition for power supply circuit timing characteristics in Table 5.9 * Added "Supply voltage for internal logic" to Figure 5.3 and deleted "CPU clock" from the figure * Changed voltage condition for Table 5.11, from "VCC1 = VCC2 = 3.3 to 5.5 V" to "VCC1 = VCC2 = 4.2 to 5.5 V"; Clarified maximum value for "Vdet" in Table 5.11; Modified self-consuming current "VCC", to "VCC1" 68 * Changed typical value and maximum value for fSO(PLL) in Table 5.12, to "55" and "80" respectively * Changed the following expressions: "PLL frequency synthesizer stabilization time" in Table 5.12, to "PLL lock time" and "tOSC(PLL)", to "tLOCK(PLL)" * Modified description for Note1 of Table 5.13 A- 4 REVISION HISTORY Rev. Date Page 70, 82 71, 83 72, 84 73, 85 75, 87 78 78, 90 R32C/111 Group Datasheet Description Summary * Added Notes 1 and 2 for 80-/64-pin packages to Tables 5.15 and 5.38 * Deleted ports P7_0, P7_1, and P8_5 for RPULLUP from Tables 5.16 and 5.39; Added Notes 1 and 2 for 80-/64-pin packages * Added "XIN" as "Active" to first, third, and sixth rows of Tables 5.17 and 5.40 * Deleted specification of ICC under condition "Ta = 85C" from Tables 5.17 and 5.40 * Modified minimum value "0.125" for AD in Tables 5.18 and 5.41, to "0.25"; Added Note 1 for 80-/64-pin packages * Clarified three "TBD"s for external bus timing in Tables 5.21 and 5.44 * Corrected a typo "th(C-Q)" in Table 5.30, to "th(C-D)" * Modified maximum value for th(C-D) "30" in Tables 5.30 and 5.53, to "80" 3 * Modified minimum value for tw(ADH) in Tables 5.31 and 5.54, to " ---------- " AD 79, 91 80, 92 81, 93 83 85 87 95 96 98, 99 * Added Tables 5.33 and 5.56 to provide intelligent I/O timing requirements * Changed the third formula of Note 1 in Tables 5.34 and 5.57 * Modified minimum value of th(W-D) "0" in Tables 5.35 and 5.58, to "0.5 x tc(Base)"; Changed the first formula of Note 1 * Modified "Characteristic" for th(C-Q) in Tables 5.36 and 5.59, from "TXDi hold time" to "TXDi output hold time" * Added Tables 5.37 and 5.60 to provide intelligent switching characteristics * Changed measurement condition for "High level input current" in Table 5.39, from "VI = 3 V" to "VI = 3.3 V" * Added a skipped word "error" after "Differential non-linearity" in Table 5.41 * Corrected typos "tw(H)," "tw(L)", "tr", and "tf" in Table 5.43, to "tw(XH)", "tw(XL)", "tr(X)", and "tf(X)", respectively * Changed D15 to D0 output period of write cycle in Figures 5.8 * Changed D15 to D8 output period of write cycle in Figures 5.9 Appendix 1 * Added figures for 100-pin plastic molded LGA, and 80-/64-pin plastic molded LQFP packages All trademarks and registered trademarks are the property of their respective owners. A- 5 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 (c) 2009. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2