S600/S601 ENGINEERING DATA SHEET SOCKET FOR 6 POLE RELAY 10 AMP BASIC SOCKET SERIES DESIGNATION FOR: SERIES F600, F601 Meets the Requirements of: For relays 6 PDT/10A MIL-DTL-12883 MIL-PRF-6106/8-CECC16101-020 MATERIALS Thermoset plastic per MIL-M-14, SDG-F Silicone rubber per ZZ-R-765 Stainless Steel Socket body Grommet Hardware GENERAL CHARACTERISTICS Crimp tool for 16 gauge contacts M22520/1-01 or 7-0l; with positioner, M22520/1-02 or 7-03 Insertion and extraction tool M81969/14-03 Weight 65g max. Temperature range -70C to +125C This connection is designed to the standards and requirements of Mil-S-12883/47 Contacts and hardware are provided disassembled in a plastic bag. Tolerances are 0.25mm unless otherwise noted. Featuring LEACH(c) power and control solutions www.esterline.com AMERICAS 6900 Orangethorpe Ave. P.O. Box 5032 Buena Park, CA 90622 Tel: (01) 714-736-7599 Fax: (01) 714-670-1145 ASIA Units 602-603 6/F Lakeside 1 No.8 Science Park West Avenue Phase Two, Hong Kong Science Park Pak Shek Kok, Tai Po, N.T. Hong Kong Tel: (33) 3 87 97 31 01 Tel: (852) 2 191 3830 Fax: (33) 3 87 97 96 86 Fax: (852) 2 389 5803 EUROPE 2 Rue Goethe 57430 Sarralbe France Data sheets are for initial product selection and comparison. Contact Esterline Power Systems prior to choosing a component. Date of issue: 8/09 -2- Page 1 of 3 MOUNTING HARDWARE DIMENSIONS S600/S601 CODE 8 CODE 7: (05-284-15) 0.1 BOTTOM MOUNT 5.58 2.4 MAX 2.4 MAX 22.6 MAX LOOSE METRIC HARDWARE TOP MOUNT TOP MOUNT 2.4 MAX 2.8 2.36 LOOSE UNC STUDS PER MIL-S-12883/47 LEACH P/N 27.6 MAX MOUNTING HOLE:5,3 mm MOUNTING HOLE:3,6 mm MOUNTING TORQUE NUT 4,8: 2 Nm NUT 2,8: 0,45 Nm FOR RELAYS WITH CODE B TERMINALS MOUNTING HOLE:3,6 mm CODE 9 FIXED UNC STUDS PER MIL-S-12883/47 TOP MOUNT 38.1 25.40 BOTTOM MOUNT 2.4 MAX 2.4 MAX 27.3 MOUNTING HOLE:5,3 mm 36.5 MOUNTING HOLE:3,6 mm MOUNTING TORQUE NUT 4,8: 2 Nm NUT 2,8: 0,45 Nm 43.7 Unless otherwise specified tolerances are 0.13mm TERMINAL LAYOUT CODE A S600 MOUNTING HOLE LAYOUT CODE B S601 36.5 2 X1 1 A B B C C D D E E F F 3 2 1 X1 25.4 3 40.64 A X2 X2 28.2 Date of issue: 8/09 -3- Page 2 of 3 WIRE GAUGE TO BE SEALED BY THE GROMMET S600/S601 Code A Contact size 16-16 1.65mm to 2.76mm CONTACT SIZE AND STYLE Code 0 Contacts not supplied Code 8 Coil Contacts (11-16-533) Insertion side: AWG 16-18-20 relay side: AWG 16 In accordance with Mil-C-39029-533 Quantity: 20 S600 A 9 A 8 1-Basic Series Designation________________________| | | | | 2-Terminal Types (A,B)_________________________________| | | | 3-Mounting Hardware (4,7,8,9)______________________________| | | 4-Grommet To Seal On Wire Insulation (A)_______________________| | 5-Contacts Size And Styles (0,8)___________________________________| MS NUMBER CROSS REFERENCE Date of issue: 8/09 MS REFERENCE S600/S601 REFERENCE M12883/47-001 M12883/47-002 M12883/47-004 M12883/47-005 S600-A8A8 S601-B8A8 S600-A9A8 S601-B9A8 -4- Page 3 of 3