CXA-P1212E-WJL Features Dimming/Connector Type Applications DC-AC Inverter 2 output Applicable panel size*: 10 to 12 inches With brightness control function (Pulse Wide Modulation mode). F A MED With shut down function. With a sensing function for running out of lamp (alarm output). In the high-voltage generator (a terminal and a pattern), an anti-dust measure by silicone application is taken. (Notice) Applicable panel size becomes a standard. MEASURE CXA-P1212E-WJL Specifications (Please refer to each specification before use) Electrical Characteristics Item Unit Symbol Iout 1.2 (Maximum dimmer) min Specification typ max Condition Vin(V) Vrmt(V) Vbr(V) Rbr(k) Ta() Connector type/2 output 6.0 6.5 12 0.6 5 0 - 23 5 90 5 5.5 6.0 6.5 12 0.6 5 - 0 23 5 90 5 5.3 6.0 6.7 121.2 5 0 - -30 to +80 90 5 5.3 6.0 6.7 121.2 5 - 0 -30 to +80 90 5 1.2 2.0 2.8 12 0.6 5 2.5 - 23 5 90 5 1.2 2.0 2.8 12 0.6 5 - 50 23 5 90 5 1.1 2.0 2.9 121.2 5 2.5 - -30 to +80 90 5 - 50 Output Current mArms Iout 1.2 (Minimum dimmer) Input Current Oscillatory Frequency Open Circuit Voltage Alarm Signal -30 to +80 90 5 0 -30 to +80 -30 to +80 90 90 5 5 5 0 -30 to +80 90 5 5 0 -30 to +80 1.1 2.0 2.9 121.2 5 A mA Iin1 Iin2 - 0.8 1.0 1 12 0.6 12 0.6 5 kHz Freq 35 40 45 12 0.6 Vrms Vopen 1500 1700 - 10.8min. V RL(k) CL(pF)(*3) 5.5 - 0 4.5 5.0 5.5 121.2 5 0 -30 to +80 - 0 0.5 121.2 5 0 -30 to +80 Open load Vst 90 Remarks Voltage dimmer (*1) Volume dimmer (*1) Voltage dimmer (*1) Volume dimmer (*1) Voltage dimmer (*1) Volume dimmer (*1) Voltage dimmer (*1) Volume dimmer (*1) Remote ON Remote OFF 5 In case of lamp anomaly (*2) On a normal operation (*2) (*1) Please refer to the connection diagram for details of a dimming method. (*2) Please refer to the connection diagram for details of alarm output. (*3) As equivalent circuit of panel load, connect resistance load (RL) and distributed capacity (CL), and have provided by an electrical characteristic. Other Specifications Dimming Function Operating Temperature Storage Temperature Operating Humidity Ratio Safety Standard Weight Dimensions (WxDxH) Fused Input Remote ON / OFF Alarm Signal Function Shutdown Function Silicone Coating on High Voltage Area Yes -30 to +80 -30 to +85 RH% 95max. g 21.2typ. mm Conformity to RoHs Directive This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. 153x21.5x8.5 (*4) Yes Yes Yes Yes Yes (*4) These dimensions are indicated the maximum only H. Others are typical values. C-112 All specifications are subject to change without notice. CXA-P1212E-WJL Outline Drawing CXA-P1212E-WJL 0419 MADE IN MALAYSIA IC2 3 7,8 CN2 1 3 CN3 1 CAUTION HIGH VOLTAGE Silicon 10.25 0.3 1070.2 140.2 1 (4.0) 7 CN1 1 T1 1 DC-AC Inverter 2-3.50.2 21.50.5 3.50.3 Label display example Product name, Lot No., country of origin (35.75) 1530.5 a:75mm :High voltage generating area (Complete area of 75mm from board end panel)* Unit: mm *From high-voltage generator, please secure space distance more than 3mm in top and bottom right and left. Connector No. Component name Type name Qty Remarks Printed circuit board PCB Composite (CEM-3) 1 UL94V-0 t=1.0 - Input connector CN1 53261-0771 1 Molex 51021-0700 1 J.S.T Mfg., Co., Ltd BHR-03VS-1 Output connector CN2,CN3 SM028.0B-BHS-1-TBLF SN Terminal Number & Function Input side CN1 Terminal No. CN1-1 CN1-2 CN1-3 CN1-4 CN1-5 Symbol Output side CN2 Rating Remarks Terminal No. Symbol CN2-1 Vin GND Vrmt CN1-6 Vst output 121.2V Power source input 0V/2.5V to Vin Remote terminal CN1-7 Vbr1/Rbr1 0 to 2.5V/0 to 50k VHIGH1 Rating Remarks 600Vrms Output 1 CN2-2 N.C. N.C. CN2-3 VLOW1 2V Output 1 return Ground 0V 0V/5V Recommended suitable connector Connector type/2 output (1.0) 8.5MAX Product securing area 0 to 0.4V : OFF 2.5 to Vin : ON Alarm output Lamp open : 5V Dimmer terminal All specifications are subject to change without notice. Output side CN3 Terminal No. Symbol CN3-1 VHIGH2 Rating Remarks 600Vrms Output 2 CN3-2 N.C. N.C. CN3-3 VLOW2 2V Output 2 return C-113 CXA-P1212E-WJL Connections 121.2V DC-AC Inverter RL : Load resistance (7W min.) CLDistributed capacity capacitor (3kV minimum) Operate as follows by switching a SW1. Operate as follows by switching a SW2. Unit operates Connector type/2 output Unit operates Operates Voltage dimmer Vbr = 0 2.5V (0V: Maximum brightness) Does not operate Does not operate Volume dimmer VR = 0 50k (0: Maximum brightness) Protection Circuit Operation Load condition Alarm output (CN1-6)*1 Shutdown function*2 Does not shut down When normal When 1 load (lamp) are NG Does not shut down When 2 load (lamp) are NG Shuts down *1. When more than one of RL in the connection diagram was opened, output alarm signal of 5V. *2. When all lamps were opened, this inverter has included protective function to stop operation in about 3 seconds. C-114 All specifications are subject to change without notice.