S-1721 Series www.sii-ic.com SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 (c) Seiko Instruments Inc., 2007-2010 S-1721 Series, developed using the CMOS technology, is a 2-channel positive voltage regulator IC which has the low dropout voltage, the high-accuracy output voltage and the low output current consumption of 150 mA. Users are able to use a small ceramic capacitor of 1.0 F for this IC. This IC includes two regulator circuits in the package SOT-23-6 or super-small SNT-6A. S-1721 Series has much lower current consumption than S-1711 Series, this IC is ideal for mobile devices. Features * Output voltage: 1.2 V to 5.0 V, selectable in 0.05 V step. * A ceramic capacitor of 1.0 F or more can be used as the I/O capacitor. * Wide input voltage range: 1.7 V to 6.5 V * High-accuracy output voltage: 1.0% * Low dropout voltage: 130 mV typ. (products having the output of 3.0 V, IOUT = 100 mA) * Low current consumption: During operation: 25 A typ., 45 A max. (products having the output of 3.0 V, per circuit) During shutdown: 0.1 A typ., 1.0 A max. Possible to output 150 mA (at VIN VOUT(S) + 1.0 V)*1 (per circuit) * Output current: * High ripple rejection: 80 dB typ. (products having the output under 1.8 V, at 1.0 kHz) * Built-in overcurrent protector: limits overcurrent of output transistor * Built-in ON/OFF circuit: Ensures long battery life. * Pull-up or pull-down resistor can be selected. * Lead-free, Sn 100%, halogen-free*2 *1. Attention should be paid to the power dissipation of the package when the output current is large. *2. Refer to " Product Name Structure" for details. Applications * Power supply for cellular phones * Power supply for battery-powered devices Packages * SNT-6A * SOT-23-6 Seiko Instruments Inc. 1 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Block Diagrams 1. S-1721 Series A type *1 ON/OFF1 VOUT1 Function ON/OFF logic Overcurrent protector Pull-up resistor ON/OFF circuit + - Pull-down resistor Status 1ch 2ch 1ch 2ch 1ch 2ch Active "H" Active "H" None None Available Available Reference voltage circuit VIN VSS *1 Overcurrent protector ON/OFF circuit + - Reference voltage circuit ON/OFF2 *1. VOUT2 Parasitic diode Figure 2. 1 S-1721 Series B type *1 ON/OFF1 VOUT1 Function ON/OFF logic Overcurrent protector Pull-up resistor ON/OFF circuit + - Pull-down resistor Reference voltage circuit VIN VSS *1 Overcurrent protector ON/OFF circuit + - Reference voltage circuit ON/OFF2 *1. VOUT2 Parasitic diode Figure 2 2 Seiko Instruments Inc. Status 1ch 2ch 1ch 2ch 1ch 2ch Active "H" Active "L" None Available Available None SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 3. S-1721 Series C type *1 ON/OFF1 VOUT1 ON/OFF logic Overcurrent protector ON/OFF circuit Function Pull-up resistor + - Pull-down resistor Status 1ch 2ch 1ch 2ch 1ch 2ch Active "L" Active "H" Available None None Available 1ch 2ch 1ch 2ch 1ch 2ch Active "L" Active "L" Available Available None None Reference voltage circuit VIN VSS *1 Overcurrent protector ON/OFF circuit + - Reference voltage circuit ON/OFF2 *1. VOUT2 Parasitic diode Figure 4. 3 S-1721 Series D type *1 VOUT1 ON/OFF1 Function ON/OFF logic Overcurrent protector Pull-up resistor ON/OFF circuit + - Pull-down resistor Status Reference voltage circuit VIN VSS *1 Overcurrent protector ON/OFF circuit + - Reference voltage circuit ON/OFF2 *1. VOUT2 Parasitic diode Figure 4 Seiko Instruments Inc. 3 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 5. S-1721 Series E type *1 ON/OFF1 VOUT1 Function ON/OFF logic Overcurrent protector Pull-up resistor ON/OFF circuit + - Pull-down resistor Status 1ch 2ch 1ch 2ch 1ch 2ch Active "H" Active "H" None None None None 1ch 2ch 1ch 2ch 1ch 2ch Active "H" Active "L" None None None None Reference voltage circuit VIN VSS *1 Overcurrent protector ON/OFF circuit + - Reference voltage circuit ON/OFF2 *1. VOUT2 Parasitic diode Figure 6. 5 S-1721 Series F type *1 ON/OFF1 VOUT1 Function ON/OFF logic Overcurrent protector Pull-up resistor ON/OFF circuit + - Pull-down resistor Reference voltage circuit VIN VSS *1 Overcurrent protector ON/OFF circuit + - Reference voltage circuit ON/OFF2 *1. VOUT2 Parasitic diode Figure 4 6 Seiko Instruments Inc. Status SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 7. S-1721 Series G type *1 ON/OFF1 VOUT1 Function ON/OFF logic Overcurrent protector Pull-up resistor ON/OFF circuit + - Pull-down resistor Status 1ch 2ch 1ch 2ch 1ch 2ch Active "L" Active "H" None None None None 1ch 2ch 1ch 2ch 1ch 2ch Active "L" Active "L" None None None None Reference voltage circuit VIN VSS *1 Overcurrent protector ON/OFF circuit + - Reference voltage circuit ON/OFF2 *1. VOUT2 Parasitic diode Figure 8. 7 S-1721 Series H type *1 ON/OFF1 VOUT1 Function ON/OFF logic Overcurrent protector Pull-up resistor ON/OFF circuit + - Pull-down resistor Status Reference voltage circuit VIN VSS *1 Overcurrent protector ON/OFF circuit + - Reference voltage circuit ON/OFF2 *1. VOUT2 Parasitic diode Figure 8 Seiko Instruments Inc. 5 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Product Name Structure Users can select the product type, output voltage, and package type for the S-1721 Series. Refer to "1. Product name" regarding the contents of product name, "2. Function list of product type" regarding the product type, "3. Package" regarding the package drawings and "4. Product name list" regarding details of product name. 1. Product name 1. 1 SNT-6A S-1721 x xx xx - I6T1 x Environmental code U : Lead-free (Sn 100%), halogen-free G : Lead-free (for details, please contact our sales office) Package abbreviation and IC packing specifications *1 I6T1: SNT-6A, tape product Output voltage of voltage regulator 2*3 12 to 50 (e.g., when the output voltage is 1.5 V, it is expressed as 15.) Output voltage of voltage regulator 1*3 12 to 50 (e.g., when the output voltage is 1.5 V, it is expressed as 15.) *2 Product type A to H *1. Refer to the tape specifications. *2. Refer to "2. Function list of product type". *3. If you request the product which has 0.05 V step, contact our sales office. 1. 2 SOT-23-6 S-1721 x xx xx - M6T1 x Environmental code U : Lead-free (Sn 100%), halogen-free G : Lead-free (for details, please contact our sales office) Package abbreviation and IC packing specifications *1 M6T1: SOT-23-6, tape product Output voltage of voltage regulator 2*3 12 to 50 (e.g., when the output voltage is 1.5 V, it is expressed as 15.) Output voltage of voltage regulator 1*3 12 to 50 (e.g., when the output voltage is 1.5 V, it is expressed as 15.) Product type*2 A to H *1. Refer to the tape specifications. *2. Refer to "2. Function list of product type". *3. If you request the product which has 0.05 V step, contact our sales office. 6 Seiko Instruments Inc. SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 2. Function list of product type Table Product Type A type B type C type D type E type F type G type H type 3. ON/OFF Logic 1ch Active "H" 2ch Active "H" 1ch Active "H" 2ch Active "L" 1ch Active "L" 2ch Active "H" 1ch Active "L" 2ch Active "L" 1ch Active "H" 2ch Active "H" 1ch Active "H" 2ch Active "L" 1ch Active "L" 2ch Active "H" 1ch Active "L" 2ch Active "L" 1 Pull-up Resistor 1ch None 2ch None 1ch None 2ch Available 1ch Available 2ch None 1ch Available 2ch Available 1ch None 2ch None 1ch None 2ch None 1ch None 2ch None 1ch None 2ch None Pull-down Resistor 1ch Available 2ch Available 1ch Available 2ch None 1ch None 2ch Available 1ch None 2ch None 1ch None 2ch None 1ch None 2ch None 1ch None 2ch None 1ch None 2ch None Package Package Name SNT-6A SOT-23-6 Drawing Code Package Tape Reel Land PG006-A-P-SD MP006-A-P-SD PG006-A-C-SD MP006-A-C-SD PG006-A-R-SD MP006-A-R-SD PG006-A-L-SD - Seiko Instruments Inc. 7 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 4. Product name list 4.1 S-1721 series A type ON/OFF logic : Pull-up resistor : Pull-down resistor : 1ch : Active "H", 2ch : Active "H" 1ch : None, 2ch : None 1ch : Available, 2ch : Available Table 8 2 (1 / 2) Voltage Regulator 1 Output Voltage Voltage Regulator 2 Output Voltage SNT-6A SOT-23-6 1.2 V 15 mV 1.2 V 15 mV S-1721A1212-I6T1x S-1721A1212-M6T1x 1.2 V 15 mV 1.5 V 1.0% S-1721A1215-I6T1x S-1721A1215-M6T1x 1.2 V 15 mV 1.8 V 1.0% S-1721A1218-I6T1x - 1.2 V 15mV 2.5 V 1.0% S-1721A1225-I6T1x - 1.2 V 15 mV 2.6 V 1.0% S-1721A1226-I6T1x - 1.2 V 15 mV 2.8 V 1.0% S-1721A1228-I6T1x S-1721A1228-M6T1x 1.2 V 15 mV 2.85 V 1.0% S-1721A122J-I6T1x - 1.2 V 15 mV 3.0 V 1.0% S-1721A1230-I6T1x - 1.2 V 15 mV 3.3 V 1.0% S-1721A1233-I6T1x S-1721A1233-M6T1x 1.25 V 15 mV 1.8 V 1.0% S-1721A1C18-I6T1x - 1.3 V 15 mV 2.8 V 1.0% - S-1721A1328-M6T1x 1.3 V 15 mV 3.0 V 1.0% - S-1721A1330-M6T1x 1.5 V 1.0% 1.2 V 15 mV S-1721A1512-I6T1x - 1.5 V 1.0% 1.3 V 15 mV S-1721A1513-I6T1x - 1.5 V 1.0% 1.5 V 1.0% S-1721A1515-I6T1x - 1.5 V 1.0% 1.8 V 1.0% S-1721A1518-I6T1x - 1.5 V 1.0% 2.5 V 1.0% S-1721A1525-I6T1x - 1.5 V 1.0% 2.8 V 1.0% - S-1721A1528-M6T1x 1.5 V 1.0% 2.85 V 1.0% S-1721A152J-I6T1x - 1.5 V 1.0% 3.0 V 1.0% S-1721A1530-I6T1x S-1721A1530-M6T1x 1.5 V 1.0% 3.3 V 1.0% S-1721A1533-I6T1x S-1721A1533-M6T1x 1.8 V 1.0% 1.2 V 15 mV S-1721A1812-I6T1x - 1.8 V 1.0% 1.5 V 1.0% S-1721A1815-I6T1x - 1.8 V 1.0% 1.8 V 1.0% S-1721A1818-I6T1x - 1.8 V 1.0% 2.5 V 1.0% S-1721A1825-I6T1x S-1721A1825-M6T1x 1.8 V 1.0% 2.6 V 1.0% S-1721A1826-I6T1x - 1.8 V 1.0% 2.8 V 1.0% S-1721A1828-I6T1x S-1721A1828-M6T1x 1.8 V 1.0% 2.9 V 1.0% S-1721A1829-I6T1x - 1.8 V 1.0% 2.85 V 1.0% S-1721A182J-I6T1x - 1.8 V 1.0% 3.0 V 1.0% S-1721A1830-I6T1x S-1721A1830-M6T1x 1.8 V 1.0% 3.3 V 1.0% S-1721A1833-I6T1x S-1721A1833-M6T1x 2.0 V 1.0% 2.0 V 1.0% S-1721A2020-I6T1x S-1721A2020-M6T1x 2.1 V 1.0% 2.1 V 1.0% S-1721A2121-I6T1x - 2.5 V 1.0% 1.2 V 15 mV S-1721A2512-I6T1x - 2.5 V 1.0% 1.5 V 1.0% S-1721A2515-I6T1x - 2.5 V 1.0% 1.8 V 1.0% S-1721A2518-I6T1x S-1721A2518-M6T1x Seiko Instruments Inc. SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Table 2 (2 / 2) Voltage Regulator 1 Output Voltage Voltage Regulator 2 Output Voltage SNT-6A SOT-23-6 2.5 V 1.0% 2.5 V 1.0% S-1721A2525-I6T1x - 2.5 V 1.0% 2.8 V 1.0% S-1721A2528-I6T1x S-1721A2528-M6T1x 2.5 V 1.0% 2.85 V 1.0% S-1721A252J-I6T1x - 2.5 V 1.0% 3.0 V 1.0% S-1721A2530-I6T1x - 2.5 V 1.0% 3.3 V 1.0% S-1721A2533-I6T1x - 2.6 V 1.0% 1.3 V 15 mV S-1721A2613-I6T1x - 2.8 V 1.0% 1.2 V 15 mV S-1721A2812-I6T1x S-1721A2812-M6T1x 2.8 V 1.0% 1.5 V 1.0% S-1721A2815-I6T1x S-1721A2815-M6T1x 2.8 V 1.0% 1.8 V 1.0% S-1721A2818-I6T1x S-1721A2818-M6T1x 2.8 V 1.0% 2.5 V 1.0% S-1721A2825-I6T1x - 2.8 V 1.0% 2.6 V 1.0% S-1721A2826-I6T1x - 2.8 V 1.0% 2.8 V 1.0% S-1721A2828-I6T1x S-1721A2828-M6T1x 2.8 V 1.0% 2.85 V 1.0% S-1721A282J-I6T1x - 2.8 V 1.0% 3.0 V 1.0% S-1721A2830-I6T1x S-1721A2830-M6T1x 2.8 V 1.0% 3.3 V 1.0% S-1721A2833-I6T1x S-1721A2833-M6T1x 2.85 V 1.0% 1.2 V 15 mV S-1721A2J12-I6T1x - 2.85 V 1.0% 1.5 V 1.0% S-1721A2J15-I6T1x - 2.85 V 1.0% 1.8 V 1.0% S-1721A2J18-I6T1x - 2.85 V 1.0% 2.85 V 1.0% S-1721A2J2J-I6T1x S-1721A2J2J-M6T1x 2.85 V 1.0% 3.3 V 1.0% S-1721A2J33-I6T1x - 3.0 V 1.0% 1.8 V 1.0% S-1721A3018-I6T1x - 3.0 V 1.0% 2.8 V 1.0% S-1721A3028-I6T1x - 3.0 V 1.0% 3.0 V 1.0% S-1721A3030-I6T1x - 3.0 V 1.0% 3.3 V 1.0% S-1721A3033-I6T1x - 3.1 V 1.0% 1.9 V 1.0% S-1721A3119-I6T1x - 3.3 V 1.0% 1.2 V 15 mV - S-1721A3312-M6T1x 3.3 V 1.0% 1.8 V 1.0% S-1721A3318-I6T1x S-1721A3318-M6T1x 3.3 V 1.0% 2.8 V 1.0% - S-1721A3328-M6T1x 3.3 V 1.0% 3.0 V 1.0% S-1721A3330-I6T1x - 3.3 V 1.0% 3.3 V 1.0% S-1721A3333-I6T1x S-1721A3333-M6T1x Remark 1. Please contact our sales office for products with specifications other than the above. 2. x: G or U 3. Please select products of environmental code = U for Sn 100%, halogen-free products. Seiko Instruments Inc. 9 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 4.2 S-1721 series B type ON/OFF logic : Pull-up resistor : Pull-down resistor : 1ch : Active "H", 2ch : Active "L" 1ch : None, 2ch : Available 1ch : Available, 2ch : None Table 3 Voltage Regulator 1 Output Voltage Voltage Regulator 2 Output Voltage SNT-6A SOT-23-6 1.5 V 1.0% 1.5 V 1.0% 1.8 V 1.0% 1.8 V 1.0% 2.8 V 1.0% 2.8 V 1.0% 2.85 V 1.0% 1.5 V 1.0% 1.8 V 1.0% 1.2 V 15 mV 1.8 V 1.0% 1.8 V 1.0% 2.8 V 1.0% 2.85 V 1.0% S-1721B1515-I6T1x S-1721B1518-I6T1x S-1721B1812-I6T1x S-1721B1818-I6T1x S-1721B2818-I6T1x - S-1721B2J2J-I6T1x - - - - - S-1721B2828-M6T1x - 4.3 S-1721 series C type ON/OFF logic : Pull-up resistor : Pull-down resistor : 1ch : Active "L", 2ch : Active "H" 1ch : Available, 2ch : None 1ch : None, 2ch : Available Table 4 Voltage Regulator 1 Output Voltage Voltage Regulator 2 Output Voltage SNT-6A SOT-23-6 2.85 V 1.0% 2.85 V 1.0% S-1721C2J2J-I6T1x S-1721C2J2J-M6T1x SNT-6A SOT-23-6 4.4 S-1721 series D type ON/OFF logic : Pull-up resistor : Pull-down resistor : 1ch : Active "L", 2ch : Active "L" 1ch : Available, 2ch : Available 1ch : None, 2ch : None Table Voltage Regulator 1 Output Voltage Voltage Regulator 2 Output Voltage 5 1.8 V 1.0% 1.8 V 1.0% S-1721D1818-I6T1x - 1.8 V 1.0% 2.8 V 1.0% - S-1721D1828-M6T1x 3.3 V 1.0% 1.8 V 1.0% S-1721D3318-I6T1x S-1721D3318-M6T1x Remark 1. Please contact our sales office for products with specifications other than the above. 2. x: G or U 3. Please select products of environmental code = U for Sn 100%, halogen-free products. 10 Seiko Instruments Inc. SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 4.5 S-1721 series E type ON/OFF logic : Pull-up resistor : Pull-down resistor : 1ch : Active "H", 2ch : Active "H" 1ch : None, 2ch : None 1ch : None, 2ch : None Table 6 Voltage Regulator 1 Output Voltage Voltage Regulator 2 Output Voltage SNT-6A SOT-23-6 1.3 V 15 mV 2.8 V 1.0% S-1721E1328-I6T1x - 1.5 V 1.0% 2.8 V 1.0% S-1721E1528-I6T1x S-1721E1528-M6T1x 1.8 V 1.0% 2.5 V 1.0% - S-1721E1825-M6T1x 1.8 V 1.0% 2.6 V 1.0% - S-1721E1826-M6T1x 1.8 V 1.0% 2.8 V 1.0% S-1721E1828-I6T1x S-1721E1828-M6T1x 1.8 V 1.0% 3.0 V 1.0% - S-1721E1830-M6T1x 1.8 V 1.0% 3.3 V 1.0% S-1721E1833-I6T1x S-1721E1833-M6T1x 2.0 V 1.0% 2.5 V 1.0% - S-1721E2025-M6T1x 2.5 V 1.0% 1.8 V 1.0% S-1721E2518-I6T1x - 2.5 V 1.0% 2.5 V 1.0% S-1721E2525-I6T1x - 2.5 V 1.0% 3.0 V 1.0% S-1721E2530-I6T1x - 2.8 V 1.0% 1.3 V 15 mV - S-1721E2813-M6T1x 2.8 V 1.0% 1.8 V 1.0% S-1721E2818-I6T1x S-1721E2818-M6T1x 2.8 V 1.0% 3.3 V 1.0% S-1721E2833-I6T1x S-1721E2833-M6T1x 2.85 V 1.0% 2.5 V 1.0% S-1721E2J25-I6T1x S-1721E2J25-M6T1x 2.85 V 1.0% 2.85 V 1.0% S-1721E2J2J-I6T1x - 3.0 V 1.0% 1.2 V 15 mV S-1721E3012-I6T1x - 3.0 V 1.0% 2.5 V 1.0% S-1721E3025-I6T1x - 3.0 V 1.0% 3.3 V 1.0% S-1721E3033-I6T1x - 3.3 V 1.0% 1.2 V 15 mV - S-1721E3312-M6T1x Remark 1. Please contact our sales office for products with specifications other than the above. 2. x: G or U 3. Please select products of environmental code = U for Sn 100%, halogen-free products. Seiko Instruments Inc. 11 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Pin Configurations SNT-6A Pin No. Top view 1 6 2 5 3 4 1 2 3 4 5 6 Table Symbol ON/OFF2 VIN ON/OFF1 VSS VOUT1 VOUT2 7 Description ON/OFF pin 2 Input voltage pin ON/OFF pin 1 GND pin Output voltage pin 1 Output voltage pin 2 Figure 9 SOT-23-6 Top view 6 5 4 1 2 3 Pin No. 1 2 3 4 5 6 Table Symbol ON/OFF1 VIN ON/OFF2 VOUT2 VSS VOUT1 Figure 10 12 Seiko Instruments Inc. 8 Description ON/OFF pin 1 Input voltage pin ON/OFF pin 2 Output voltage pin 2 GND pin Output voltage pin 1 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Absolute Maximum Ratings Table Item (Ta = 25C unless otherwise specified) Absolute Maximum Rating Unit Symbol VSS - 0.3 to VSS + 7.0 VSS - 0.3 to VIN + 0.3 VSS - 0.3 to VIN + 0.3 400*1 650*1 -40 to +85 -40 to +125 VIN VON/OFF1, 2 VOUT1, 2 Input voltage Output voltage SNT-6A SOT-23-6 Operating ambient temperature Storage temperature Power dissipation PD Topr Tstg V V V mW mW C C When mounted on board [Mounted board] (1) Board size : 114.3 mm x 76.2 mm x t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. 700 Power Dissipation (PD) [mW] *1. 9 600 500 SOT-23-6 400 300 200 SNT-6A 100 0 0 50 100 150 Ambient Temperature (Ta) [C] Figure 11 Power Dissipation of Package (when mounted on board) Seiko Instruments Inc. 13 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Electrical Characteristics Table 10 Voltage regulator 1 and voltage regulator 2 (per circuit) Item Output voltage *1 Output current*2 Dropout voltage*3 Line regulation Load regulation Output voltage *4 temperature coefficient Current consumption during operation (per circuit) Current consumption during shutdown Input voltage ON/OFF pin input voltage "H" ON/OFF pin input voltage "L" Symbol VOUT(E) IOUT Vdrop VOUT1 VIN* VOUT VOUT2 VOUT Ta * VOUT ISS1 ISS2 VIN 1.2 V VOUT(S) < 1.5 V 1.5 V VOUT(S) 5.0 V VIN VOUT(S) + 1.0 V IOUT = 100 mA 1.2 V VOUT(S) < 1.3 V 1.3 V VOUT(S) < 1.4 V 1.4 V VOUT(S) < 1.5 V 1.5 V VOUT(S) < 1.7 V 1.7 V VOUT(S) < 2.0 V 2.0 V VOUT(S) < 2.8 V 2.8 V VOUT(S) 5.0 V VOUT(S) - 0.015 VOUT(S) x 0.99 150*5 0.50 0.40 0.30 0.54 0.44 0.34 0.26 0.20 0.16 0.13 VOUT(S) + 0.015 VOUT(S) x 1.01 0.58 0.48 0.39 0.39 0.35 0.24 0.23 VOUT(S) VOUT(S) V 2, 3 V 2, 3 mA V V V V V V V 4, 5 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 VOUT(S) + 0.5 V VIN 6.5 V, IOUT = 30 mA 0.05 0.2 %/V 2, 3 VIN = VOUT(S) + 1.0 V, 100 A IOUT 100 mA VIN = VOUT(S) + 1.0 V, IOUT = 30 mA, -40C Ta +85C VIN = VOUT(S) + 1.0 V, ON/OFF pin = ON, no load 1.2 V VOUT(S) < 1.5 V VIN = VOUT(S) + 1.0 V, ON/OFF pin = ON, no load 1.5 V VOUT(S) < 1.8 V VIN = VOUT(S) + 1.0 V, ON/OFF pin = ON, no load 1.8 V VOUT(S) 5.0 V 20 40 mV 2, 3 120 ppm/C 2, 3 35 45 A 1 32 45 A 1 25 45 A 1 VIN = VOUT(S) + 1.0 V, ON/OFF pin = OFF, no load 0.1 1.0 A 1 1.7 6.5 V 1 VIN = VOUT(S) + 1.0 V, RL = 1.0 k 1.2 V 6, 7 VSL VIN = VOUT(S) + 1.0 V, RL = 1.0 k 0.3 V 6, 7 -0.1 0.1 A 1.0 -0.1 1.0 2.5 2.5 4.2 0.1 4.2 A A A 80 dB 8, 9 75 dB 8, 9 70 dB 8, 9 150 mA 4, 5 1.5 2.6 6.5 M 6, 7 ISH ON/OFF pin input current "L" ISL RR Short-circuit current Ishort Shutdown pull-up/pulldown resistor RPD 14 VIN = VOUT(S) + 1.0 V, IOUT = 30 mA VSH ON/OFF pin input current "H" Ripple rejection Conditions (Ta = 25C unless otherwise specified) Test Min. Typ. Max. Unit Circuit VIN = 6.5 V, B (2ch)/C (1ch)/D/E/F/G/H type VON/OFF = 6.5 V A/B (1ch)/C (2ch) type A/B (1ch)/C (2ch)/E/F/G/H type VIN = 6.5 V, VON/OFF = 0 V B (2ch)/C (1ch)/D type 1.2 V VOUT(S) < 1.8 V VIN = VOUT(S) + 1.0 V, f = 1.0 kHz, 1.8 V VOUT(S) < 3.1 V Vrip = 0.5 Vrms, 3.1 V VOUT(S) 5.0 V IOUT = 30 mA VIN = VOUT(S) + 1.0 V, ON/OFF pin = ON, VOUT = 0 V Seiko Instruments Inc. 6, 7 6, 7 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series *1. VOUT(S): Specified output voltage VOUT(E): Actual output voltage at the fixed load Output voltage when fixing IOUT(= 30 mA) and inputting VOUT(S) +1.0 V *2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current. *3. Vdrop = VIN1 - (VOUT3 x 0.98) VOUT3 is the output voltage when VIN = VOUT(S) + 1.0 V and IOUT = 100 mA. VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input voltage. *4. The change in temperature [mV/C] is calculated using the following equation. VOUT [mV/ C]*1 = VOUT(S)[V ]* 2 x VOUT [ppm/ C]* 3 / 1000 Ta Ta * VOUT *1. Change in temperature of the output voltage *2. Specified output voltage *3. Output voltage temperature coefficient *5. The output current can be at least this value. Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This specification is guaranteed by design. Seiko Instruments Inc. 15 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Test Circuit + 1. A VOUT2 ON/OFF2 *1 *1. VIN VOUT1 ON/OFF1 VSS Set to VIN or GND Figure 2. VOUT2 ON/OFF2 *1 *1. *2. VIN A + VOUT2 + V ON/OFF1 VSS ON/OFF2 *1 VIN VOUT1 *2 Set to power-on Set to power-off 4. VOUT2 ON/OFF2 *1 VIN 14 A VOUT1 ON/OFF1 VSS *2 Set to power-off Set to VIN or GND Figure 5. A + V VOUT2 ON/OFF2 *1 VIN 15 VOUT1 ON/OFF1 VSS *2 Set to VIN or GND Set to power-off Figure 16 *2 13 ON/OFF1 VSS Figure *1. *2. + A + V Set to power-off Set to power-on 3. *1. *2. 12 VOUT1 Figure *1. *2. *1 16 Seiko Instruments Inc. + V SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 6. VOUT2 ON/OFF2 *1 *1. VIN VOUT1 ON/OFF1 VSS 7. RL + + VOUT2 A V ON/OFF2 VIN RL VOUT1 *1 Set to power-off 8. VOUT2 ON/OFF2 *1 VIN 18 VOUT1 ON/OFF1 VSS *2 + V RL Set to power-off Set to power-on Figure 9. VOUT2 RL *1. *2. + V 17 ON/OFF1 VSS Figure *1. *2. + Set to power-off Figure *1. A + V ON/OFF2 *1 VIN 19 VOUT1 ON/OFF1 VSS *2 Set to power-on Set to power-off Figure 20 Seiko Instruments Inc. 17 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Standard Circuit INPUT CIN OUTPUT 1 *1 VIN VOUT1 ON/OFF1 VOUT2 OUTPUT 2 ON/OFF2 VSS CL1 CL2 *2 Single GND *1. *2. GND CIN is a capacitor for stabilizing the input. A ceramic capacitor of 1.0 F or more can be used for CL1 and CL2. Figure Caution *2 21 The above connection diagram and constant will not guarantee successful operation. Perform thorough evaluation using the actual application to set the constant. Condition of Application Input capacitor (CIN) : Output capacitor (CL1, CL2) : 1.0 F or more 1.0 F or more (ceramic capacitor) Caution A general series regulator may oscillate, depending on the external components. Confirm that no oscillation occurs in the application for which the above capacitors are used. Selection of Input and Output Capacitors (CIN, CL1, CL2) The S-1721 Series requires an output capacitor between the VOUT and VSS pin for phase compensation. Operation is stabilized by a ceramic capacitor with an output capacitance of 1.0 F or more over the entire temperature range. When using an OS capacitor, tantalum capacitor, or aluminum electrolytic capacitor, the capacitance must be 1.0 F or more. The value of the output overshoot or undershoot transient response varies depending on the value of the output capacitor. The required capacitance of the input capacitor differs depending on the application. The recommended capacitance for an application is CIN 1.0 F, CL1 1.0 F, CL2 1.0 F; however, when selecting the output capacitor, perform sufficient evaluation, including evaluation of temperature characteristics, on the actual device. 18 Seiko Instruments Inc. SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Explanation of Terms 1. Low dropout voltage regulator This IC's voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor. 2. Output voltage (VOUT) The accuracy of the output voltage is ensured at 1.0% under the specified conditions of fixed input voltage*1, fixed output current, and fixed temperature. *1. Differs depending on the product. Caution If the above conditions change, the output voltage value may vary and exceed the accuracy range of the output voltage. See " Electrical Characteristics" and " Characteristics (Typical Data) (Per Circuit)" for details. 3. Line regulation VOUT1 VIN *VOUT Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output voltage changes due to a change in the input voltage with the output current remaining unchanged. 4. Load regulation (VOUT2) Indicates the dependency of the output voltage on the output current. That is, the values show how much the output voltage changes due to a change in the output current with the input voltage remaining unchanged. 5. Dropout voltage (Vdrop) Indicates the difference between input voltage VIN and the output voltage when; decreasing input voltage VIN gradually until the output voltage has dropped out to the value of 98% of output voltage VOUT3, which is at VIN = VOUT(S) + 1.0 V. Vdrop = VIN1 - (VOUT3 x 0.98) Seiko Instruments Inc. 19 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 6. Temperature coefficient of output voltage VOUT Ta *VOUT The shaded area in Figure 22 is the range where VOUT varies in the operating temperature range when the temperature coefficient of the output voltage is 120 ppm/C. Example of VOUT = 3.0 V Typ. products VOUT [V] +0.36 mV/C *1 VOUT(E) -0.36 mV/C -40 *1. 25 85 Ta [C] VOUT(E) is the value of the output voltage measured at 25C. Figure 22 A change in the temperature of the output voltage [mV/C] is calculated using the following equation. VOUT [mV/ C]*1 = VOUT(S)[V ]* 2 x VOUT [ppm/ C]*3 / 1000 Ta Ta * VOUT *1. Change in temperature of output voltage *2. Specified output voltage *3. Output voltage temperature coefficient 20 Seiko Instruments Inc. SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Operation 1. Basic operation Figure 23 shows the block diagram of S-1721 Series. The error amplifier compares the reference voltage (Vref) with Vfb, which is the output voltage resistance-divided by feedback resistors Rs and Rf. It supplies the gate voltage necessary to maintain the constant output voltage which is not influenced by the input voltage and temperature change, to the output transistor. VIN *1 Current supply Error amplifier Vref VOUT - Rf + Vfb Reference voltage circuit Rs VSS *1. Parasitic diode Figure 23 2. Output transistor In the S-1721 Series, a low on-resistance P-channel MOS FET is used as the output transistor. Be sure that VOUT does not exceed VIN + 0.3 V to prevent the voltage regulator from being damaged due to inverse current flowing from the VOUT pin through a parasitic diode to the VIN pin. Seiko Instruments Inc. 21 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 3. ON/OFF pin 1 and 2 These pins start and stop the regulator. When the ON/OFF pin is set to the power-off level, the entire internal circuit stops operating, and the built-in Pchannel MOS FET output transistor between the VIN and VOUT pin is turned off, in order to reduce the current consumption significantly. The VOUT pin is set to the VSS level by the internal dividing resistor of several hundred k which is placed between the VOUT and VSS pin. Note that the current consumption increases when a voltage of 0.3 V to 1.2 V (@Ta = 25C) is applied to the ON/OFF pin. The ON/OFF pin is configured as shown in Figures 24 and 25. In the S-1721 Series A, B C, and D types, the ON/OFF pin is internally pulled up to VIN or pulled down to VSS when in the floating status, so the VOUT pin is set to the VSS level. In the S-1721 Series E, F, G and H types, do not use S-1721 Series in the floating status because the ON/OFF pin is not internally pulled up or pulled down. When not using the ON/OFF pin in the S-1721 Series E, F, G, and H types, connect the ON/OFF pin to the VIN pin in the E, F (1ch only), and G (2ch only) types. In the F (2ch only), G (1ch only) and H types, connect the ON/OFF pin to the VSS pin. Logic Type A B C D E F G H (1) Table Internal Circuits ON/OFF Pin 1ch "H": Power on 2ch "H": Power on 1ch "H": Power on 2ch "L": Power on 1ch "L": Power on 2ch "H": Power on 1ch "L": Power on 2ch "L": Power on 1ch "L": Power off 2ch "L": Power off 1ch "L": Power off 2ch "H": Power off 1ch "H": Power off 2ch "L": Power off 1ch "H": Power off 2ch "H": Power off 11 Operate Operate Operate Operate Operate Operate Operate Operate Stop Stop Stop Stop Stop Stop Stop Stop S-1721 Series A, B, C, D Types (2) VOUT Pin Voltage Current Consumption Set value Set value Set value Set value Set value Set value Set value Set value VSS level VSS level VSS level VSS level VSS level VSS level VSS level VSS level ISS1 ISS1 ISS1 ISS1 ISS1 ISS1 ISS1 ISS1 ISS2 ISS2 ISS2 ISS2 ISS2 ISS2 ISS2 ISS2 S-1721 Series E, F, G, H Types VIN VIN B (2ch), C (1ch), D types ON/OFF ON/OFF A, B (1ch), C (2ch) type VSS VSS Figure 22 24 Figure Seiko Instruments Inc. 25 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series 4. Overcurrent protector The S-1721 Series has a built-in overcurrent protector having the characteristics shown in (1) Output Voltage vs. Output Current (Ta = 25C) in " Characteristics (Typical Data) (Per Circuit)" to protect the output transistor against an excessive output current and short circuiting between the VOUT and VSS pin. The current (Ishort) when the output pin is short-circuited is internally set at approximately 150 mA (Typ.), and the initial value is restored for the output voltage, if releasing a short circuit once. Caution Note that the overcurrent protect circuit does not provide a thermal protection function, therefore pay attention to the conditions of input voltage and load current so that the IC's loss under the usage conditions, including the short circuit conditions, does not exceed the package power dissipation if the condition in which a short circuiting or large current state (150 mA or more) continues for a long time. 5. Pull-down/pull-up resistor (S-1721 Series A, B, C, and D types) In the S-1721 Series A, B, C, and D types, the ON/OFF pin is internally pulled up to VIN or pulled down to VSS, so the VOUT pin is in the VSS level when in the floating status. In A/B (1ch only) and C (2ch only), the ON/OFF pin is connected to VIN, In B (2ch only)/C (1ch only)/D type, the ON/OFF pin is connected to VSS; Note that during operation in these cases, the current consumption of the IC is generated as much as the current which flows into a pull-up resistor of 2.6 M or a pull-down resistor of 2.6 M. Seiko Instruments Inc. 23 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Precautions * Wiring patterns for the VIN, VOUT and GND pins should be designed so that the impedance is low. When mounting an output capacitor between the VOUT and VSS pin (CL1, CL2) and a capacitor for stabilizing the input between VIN and VSS pin (CIN), the distance from the capacitors to these pins should be as short as possible. * Note that the output voltage may increase when a series regulator is used at low load current (1.0 mA or less). * Note that the output voltage may increase due to the leakage current from a driver when a series regulator is used at high temperature. * Generally a series regulator may cause oscillation, depending on the selection of external parts. The following conditions are recommended for this IC. However, be sure to perform sufficient evaluation under the actual usage conditions for selection, including evaluation of temperature characteristics. See "(5) Example of Equivalent Series Resistance vs. Output Current Characteristics (Ta = 25C)" in " Reference Data (Per Circuit)" for the equivalent series resistance (RESR) of the output capacitor. Input capacitor (CIN) : Output capacitor (CL1, CL2) : 1.0 F or more 1.0 F or more * The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitor is small * * * * * * * 24 or an input capacitor is not connected. Note that, if the capacitance of the output capacitor is greater than that of the input capacitor, the voltage regulator may oscillate. Note that an oscillation may occur when the load current is high (100 mA or higher) and the difference between the voltage input and output is around the dropout voltage if the inductance of the power supply is high. Perform sufficient evaluation including electrical characteristics under the actual use conditions to select an input capacitor. Concerning the fluctuation of output voltage due to power-supplying and load, confirm with the actual device. If the power supply suddenly increases, a momentary overshoot may be output. It is therefore important to sufficiently evaluate the output voltage at power application in the actual equipment. The application conditions for the input voltage, output voltage, and load current should not exceed the package power dissipation. Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic protection circuit. In determining the output current, attention should be paid to the output current value specified in Table 10 in " Electrical Characteristics" and footnote *5 of the table. SII claims no responsibility for any disputes arising out of or in connection with any infringement by products including this IC of patents owned by a third party. Seiko Instruments Inc. SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Characteristics (Typical Data) (Per Circuit) (1) Output Voltage vs. Output Current (When Load Current Increases) (Ta = 25C) VOUT = 3.0 V 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 VOUT [V] VOUT [V] VOUT = 1.2 V 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 VIN = 1.5 V 1.7 V 2.2 V 3.2 V 6.5 V 0 100 200 IOUT [mA] 400 300 VIN = 3.3 V 3.5 V 4.0 V 5.0 V 6.5 V 0 100 200 IOUT [mA] 300 400 VOUT = 5.0 V 6 VOUT [V] 5 Remark In determining the output current, attention should be paid to the following. 1. The minimum output current value and footnote *5 in Table 10 in the " Electrical Characteristics" 2. The package power dissipation VIN = 5.3 V 5.5 V 6.0 V 6.5 V 4 3 2 1 0 0 100 200 IOUT [mA] 400 300 (2) Output Voltage vs. Input Voltage (Ta = 25C) VOUT = 3.0 V 3.1 1.25 3.0 1.20 2.9 1.15 VOUT [V] VOUT [V] VOUT = 1.2 V 1.30 IOUT = 1 mA IOUT = 30 mA IOUT = 50 mA 1.10 1.05 IOUT = 1 mA IOUT = 30 mA IOUT = 50 mA 2.8 2.7 2.6 2.5 1.00 1.0 VOUT [V] VOUT = 5.0 V 5.2 5.1 5.0 4.9 4.8 4.7 4.6 4.5 1.5 2.0 2.5 VIN [V] 3.0 3.5 2.5 3.0 3.5 4.0 VIN [V] 4.5 5.0 IOUT = 1 mA IOUT = 30 mA IOUT = 50 mA 4.5 5.0 5.5 VIN [V] 6.0 6.5 Seiko Instruments Inc. 25 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series (3) Dropout Voltage vs. Output Current VOUT = 1.2 V 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 VOUT = 3.0 V 0.30 0.25 Vdrop [V] Vdrop [V] 85C 25C -40C 0.20 0.10 0.05 0 0 100 IOUT [mA] 50 150 200 150 200 VOUT = 5.0 V 0.25 Vdrop [V] 0.20 85C 25C -40C 0.15 0.10 0.05 0 0 100 IOUT [mA] 50 Vdrop [V] (4) Dropout Voltage vs. Set Output Voltage 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 150 mA 100 mA 50 mA 30 mA 10 mA 0 26 85C 25C -40C 0.15 1 2 3 VOTA [V] 4 5 6 Seiko Instruments Inc. 0 50 100 IOUT [mA] 150 200 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series (5) Output Voltage vs. Ambient Temperature VOUT = 1.2 V 1.30 VOUT = 3.0 V 3.20 3.15 3.10 3.05 3.00 2.95 2.90 2.85 2.80 VOUT [V] VOUT [V] 1.25 1.20 1.15 1.10 -40 -25 0 25 Ta [C] 50 75 85 -40 -25 0 25 Ta [C] 50 75 85 -40 -25 0 25 Ta [C] 75 85 50 VOUT = 5.0 V 5.3 VOUT [V] 5.2 5.1 5.0 4.9 4.8 4.7 (6) Current Consumption vs. Input Voltage VOUT = 3.0 V 40 35 30 25 20 15 10 5 0 ISS1 [A] ISS1 [A] VOUT = 1.2 V 40 35 30 25 20 15 10 5 0 85C 25C -40C 0 1 2 3 4 VIN [V] 5 ISS1 [A] VOUT = 5.0 V 40 35 30 25 20 15 10 5 0 6 7 85C 25C -40C 0 1 2 3 4 VIN [V] 5 6 7 85C 25C -40C 0 1 2 3 4 VIN [V] 5 6 7 Seiko Instruments Inc. 27 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series (7) Ripple Rejection (Ta = 25C) VOUT = 3.0 V VIN = 2.2 V, CLn = 1.0 F VOUT = 1.2 V # $% !" # & $% !" # $% !" VOUT = 5.0 V Remark 28 VIN = 6.0 V, CLn = 1.0 F # $% # & $% !" # $% !" !" CLn: Capacitor set to VOUTn pin externally (n = 1, 2) Seiko Instruments Inc. VIN = 4.0 V, CLn = 1.0 F # $% # & $% !" # $% !" !" SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Reference Data (Per Circuit) 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 VOUT [V] 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 VIN [V] VIN [V] VOUT = 5.0 V IOUT = 30 mA, tr = tf = 5.0 s, CLn = 1.0 F, CIN = 1.0 F 5.04 5.03 VIN 5.02 5.01 5.00 VOUT 4.99 4.98 4.97 -100 -50 0 50 100 150 200 250 300 350 t [s] VOUT = 3.0 V IOUT = 30 mA, tr = tf = 5.0 s, CLn = 1.0 F, CIN = 1.0 F 3.10 3.08 3.06 VIN 3.04 3.02 VOUT 3.00 2.98 2.96 -100 -50 0 50 100 150 200 250 300 350 t [s] VOUT [V] 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 VOUT [V] VOUT = 1.2 V IOUT = 30 mA, tr = tf = 5.0 s, CLn = 1.0 F, CIN = 1.0 F 1.30 1.28 1.26 VIN 1.24 1.22 VOUT 1.20 1.18 1.16 1.14 -100 -50 0 50 100 150 200 250 300 350 t [s] VIN [V] (1) Transient Response Characteristics when Input (Ta = 25C) Common to VR1 and VR2 (2) Transient Response Characteristics of Load (Ta = 25C) Remark VOUT [V] IOUT [mA] IOUT [mA] VOUT = 1.2 V VIN = 2.2 V, CLn = 1.0 F, CIN = 1.0 F, IOUT = 10 100 mA 200 1.42 150 1.38 1.34 100 IOUT 1.30 50 0 1.26 VOUT 1.22 -50 1.18 -100 1.14 -150 1.10 -200 1.06 -250 -100 -50 0 50 100 150 200 250 300 350 t [s] VOUT = 3.0 V VIN = 4.0 V, CLn = 1.0 F, CIN = 1.0 F, IOUT = 10 100 mA 200 3.25 150 3.20 3.15 100 IOUT 3.10 50 0 3.05 3.00 -50 VOUT 2.95 -100 2.90 -150 2.85 -200 2.80 -250 -100 -50 0 50 100 150 200 250 300 350 t [s] VOUT [V] IOUT [mA] IOUT [mA] VOUT [V] VOUT [V] VOUT = 1.2 V VIN = 2.2 V, CLn = 1.0 F, CIN = 1.0 F, IOUT = 10 50 mA 100 1.46 75 1.42 1.38 50 IOUT 1.34 25 0 1.30 VOUT 1.26 -25 1.22 -50 1.18 -100 1.14 -125 1.10 -150 -100 -50 0 50 100 150 200 250 300 350 t [s] VOUT = 3.0 V VIN = 4.0 V, CLn = 1.0 F, CIN = 1.0 F, IOUT = 10 50 mA 100 3.25 75 3.20 3.15 50 IOUT 3.10 25 0 3.05 3.00 -25 VOUT 2.95 -50 2.90 -75 2.85 -100 2.80 -125 -100 -50 0 50 100 150 200 250 300 350 t [s] CLn: Capacitor set to VOUTn pin externally (n = 1, 2) Seiko Instruments Inc. 29 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series IOUT [mA] VOUT = 5.0 V VIN = 6.0 V, CLn = 1.0 F, CIN = 1.0 F, IOUT = 10 100 mA 200 5.50 150 5.40 5.30 100 IOUT 5.20 50 0 5.10 5.00 -50 VOUT 4.90 -100 4.80 -150 4.70 -200 4.60 -250 -100 -50 0 50 100 150 200 250 300 350 t [s] VOUT [V] VOUT [V] IOUT [mA] VOUT = 5.0 V VIN = 6.0 V, CLn = 1.0 F, CIN = 1.0 F, IOUT = 10 50 mA 100 5.50 75 5.40 5.30 50 IOUT 5.20 25 0 5.10 5.00 -25 VOUT 4.90 -50 4.80 -75 4.70 -100 4.60 -125 -100 -50 0 50 100 150 200 250 300 350 t [s] (3) Transient Response Characteristics of ON/OFF Pin (Ta = 25C) -2.0 VOUT 0.8 -4.0 -6.0 0.4 -8.0 0 0 50 100 t [s] 150 200 Remark 30 VON / OFF [V] VOUT [V] VOUT = 5.0 V VIN = 6.0 V, tr = 5.0 s, CLn = 1.0 F, CIN = 1.0 F, IOUT = 100 mA 10.0 8.0 9.0 6.0 VON / OFF 4.0 8.0 7.0 2.0 6.0 0 5.0 -2.0 VOUT 4.0 -4.0 3.0 -6.0 -8.0 2.0 -10.0 1.0 -12.0 0 0 50 100 150 200 t [s] CLn: Capacitor set to VOUTn pin externally (n = 1, 2) Seiko Instruments Inc. VON / OFF [V] 0 1.2 VOUT = 3.0 V VIN = 4.0 V, tr = 5.0 s, CLn = 1.0 F, CIN = 1.0 F, IOUT = 100 mA 6.0 7.0 VON / OFF 6.0 4.0 5.0 2.0 0 4.0 -2.0 3.0 VOUT 2.0 -4.0 -6.0 1.0 0 -8.0 0 50 100 150 200 t [s] VOUT [V] 1.6 VON / OFF [V] VOUT [V] VOUT = 1.2 V VIN = 2.2 V, tr = 5.0 s, CLn = 1.0 F, CIN = 1.0 F, IOUT = 100 mA 4.0 2.4 VON / OFF 2.0 2.0 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series (4) Transient Response Characteristics of Load's Mutual Interference (Ta = 25C) VOUT2 [V] 1.30 1.26 VOUT2 1.22 1.18 1.14 1.26 1.22 1.18 VOUT1 1.14 1.10 1.06 -100 -50 0 50 100 150 200 250 300 350 t [s] 150 100 50 0 -50 IOUT1 VOUT1 [V] VOUT1 [V] VOUT2 [V] IOUT1 IOUT1 [mA] 150 100 50 0 -50 3.10 VOUT2 3.05 3.00 2.95 2.90 3.05 3.00 VOUT1 2.95 2.90 2.85 2.80 -100 -50 0 IOUT1 [mA] VOUT1 = VOUT2 = 3.0 V VIN = 4.0 V, CL1 = CL2 = 1.0 F, CIN = 1.0 F, IOUT1 = 10 100 mA, IOUT2 = no load VOUT1 = VOUT2 = 1.2 V VIN = 2.2 V, CL1 = CL2 = 1.0 F, CIN = 1.0 F, IOUT1 = 10 100 mA, IOUT2 = no load 50 100 150 200 250 300 350 t [s] 150 100 50 0 -50 VOUT1 [V] VOUT2 [V] IOUT1 5.20 5.10 VOUT2 5.00 4.90 4.80 5.10 5.00 VOUT1 4.90 4.80 4.70 4.60 -100 -50 0 IOUT1 [mA] VOUT1 = VOUT2 = 5.0 V VIN = 6.0 V, CL1 = CL2 = 1.0 F, CIN = 1.0 F, IOUT1 = 10 100 mA, IOUT2 = no load 50 100 150 200 250 300 350 t [s] (5) Example of Equivalent Series Resistance vs. Output Current Characteristics (Ta = 25C) CIN = CLn = 1.0 F RESR [] 100 Stable 0.01 0 150 IOUT [mA] Remark CLn: Capacitor set to VOUTn pin externally (n = 1, 2) Seiko Instruments Inc. 31 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series Marking Specifications (1) SNT-6A SNT-6A Top view 1 (1) (2) (3) 3 (4) (5) (6) 2 6 (1) to (3) : Product code (Refer to Product name vs. Product code) (4) to (6) : Lot number 5 4 Product name vs. Product code (a) S-1721 Series A type Product code Product code Product Name (1) (2) (3) (1) (2) (3) S-1721A1212-I6T1x S 2 B S-1721A2515-I6T1x S 6 P S-1721A1215-I6T1x S 2 D S-1721A2518-I6T1x S 2 Z S-1721A1218-I6T1x S 2 S S-1721A2525-I6T1x S 6 Q S-1721A1225-I6T1x S 6 D S-1721A2528-I6T1x S 6 R S-1721A1226-I6T1x S 6 7 S-1721A252J-I6T1x S 6 S S-1721A1228-I6T1x S 6 E S-1721A2530-I6T1x S 6 T S-1721A122J-I6T1x S 6 F S-1721A2533-I6T1x S 6 U S-1721A1230-I6T1x S 6 G S-1721A2613-I6T1x S 6 A S-1721A1233-I6T1x S 2 N S-1721A2812-I6T1x S 6 B S-1721A1C18-I6T1x S 2 W S-1721A2815-I6T1x S 2 H S-1721A1512-I6T1x S 6 H S-1721A2818-I6T1x S 2 I S-1721A1513-I6T1x S 2 P S-1721A2825-I6T1x S 6 V S-1721A1515-I6T1x S 2 Q S-1721A2826-I6T1x S 2 8 S-1721A1518-I6T1x S 6 I S-1721A2828-I6T1x S 2 A S-1721A1525-I6T1x S 6 J S-1721A282J-I6T1x S 6 W S-1721A152J-I6T1x S 6 K S-1721A2830-I6T1x S 6 X S-1721A1530-I6T1x S 6 L S-1721A2833-I6T1x S 6 C S-1721A1533-I6T1x S 6 M S-1721A2J12-I6T1x S 6 9 S-1721A1812-I6T1x S 2 T S-1721A2J15-I6T1x S 7 A S-1721A1815-I6T1x S 6 N S-1721A2J18-I6T1x S 2 V S-1721A1818-I6T1x S 2 X S-1721A2J2J-I6T1x S 2 J S-1721A1825-I6T1x S 2 F S-1721A2J33-I6T1x S 6 8 S-1721A1826-I6T1x S 2 7 S-1721A3018-I6T1x S 2 6 S-1721A1828-I6T1x S 2 G S-1721A3028-I6T1x S 6 Y S-1721A1829-I6T1x S 6 4 S-1721A3030-I6T1x S 2 K S-1721A182J-I6T1x S 2 U S-1721A3033-I6T1x S 6 Z S-1721A1830-I6T1x S 2 3 S-1721A3119-I6T1x S 2 L S-1721A1833-I6T1x S 2 2 S-1721A3318-I6T1x S 2 M S-1721A2020-I6T1x S 2 C S-1721A3330-I6T1x S 6 2 S-1721A2121-I6T1x S 2 R S-1721A3333-I6T1x S 2 O S-1721A2512-I6T1x S 6 O Remark 1. Please contact our sales office for products with specifications other than the above. 2. x: G or U 3. Please select products of environmental code = U for Sn 100%, halogen-free products. Product Name 32 Seiko Instruments Inc. SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series (b) S-1721 Series B type Product Name S-1721B1515-I6T1x S-1721B1518-I6T1x S-1721B1812-I6T1x S-1721B1818-I6T1x S-1721B2818-I6T1x S-1721B2J2J-I6T1x (e) S-1721 Series E type Product code (1) (2) (3) S 3 A S 3 B S 3 C S 3 D S 3 E S 3 F (c) S-1721 Series C type Product Name S-1721C2J2J-I6T1x Product code (1) (2) (3) S 4 A (d) S-1721 Series D type Product Name (1) Product code (2) (3) S-1721E1328-I6T1x S-1721E1528-I6T1x S-1721E1828-I6T1x S-1721E1833-I6T1x S-1721E2518-I6T1x S-1721E2525-I6T1x S-1721E2530-I6T1x S-1721E2818-I6T1x Product code (1) (2) (3) S 5 A S 5 B S 5 D S 5 L S 5 E S 5 F S 5 O S 5 G S-1721E2833-I6T1x S-1721E2J25-I6T1x S S Product Name 5 5 H K S-1721E2J2J-I6T1x S 5 I S-1721E3012-I6T1x S-1721E3025-I6T1x S-1721E3033-I6T1x S S S 5 5 5 S P J S-1721D1818-I6T1x S 4 T S-1721D3318-I6T1x S 4 S Remark 1. Please contact our sales office for products with specifications other than the above. 2. x: G or U 3. Please select products of environmental code = U for Sn 100%, halogen-free products. Seiko Instruments Inc. 33 SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.2.0_00 S-1721 Series (2) SOT-23-6 SOT-23-6 Top view 6 5 4 (1) to (3) : Product code (Refer to Product name vs. Product code) (4) : Lot number (1) (2) (3) (4) 1 2 3 Product name vs. Product code (a) S-1721 Series A type Product Name S-1721A1212-M6T1x S-1721A1215-M6T1x S-1721A1228-M6T1x S-1721A1233-M6T1x S-1721A1328-M6T1x S-1721A1330-M6T1x S-1721A1528-M6T1x S-1721A1530-M6T1x S-1721A1533-M6T1x S-1721A1825-M6T1x S-1721A1828-M6T1x S-1721A1830-M6T1x S-1721A1833-M6T1x S-1721A2020-M6T1x Product code (1) (2) (3) S S S S S S S S S S S S S S 2 2 6 2 2 2 2 6 6 2 2 2 2 2 B D E N 4 E Y L M F G 3 2 C S-1721B2828-M6T1x S-1721A2518-M6T1x S-1721A2528-M6T1x S-1721A2812-M6T1x S-1721A2815-M6T1x S-1721A2818-M6T1x S-1721A2828-M6T1x S-1721A2830-M6T1x S-1721A2833-M6T1x S-1721A2J2J-M6T1x S-1721A3312-M6T1x S-1721A3318-M6T1x S-1721A3328-M6T1x S-1721A3333-M6T1x Product code (1) (2) (3) S S S S S S S S S S S S S 2 6 6 2 2 2 6 6 2 2 2 6 2 Product code (1) (2) (3) S 3 G Product Name S-1721E1528-M6T1x (1) Product code (2) (3) S S-1721E1825-M6T1x S (c) S-1721 Series C type S-1721E1826-M6T1x S Product code S-1721E1828-M6T1x S Product Name (1) (2) (3) S-1721E1830-M6T1x S S-1721C2J2J-M6T1x S 4 A S-1721E1833-M6T1x S S-1721E2025-M6T1x S (d) S-1721 Series D type S-1721E2813-M6T1x S Product code S-1721E2818-M6T1x S Product Name (1) (2) (3) S-1721E2833-M6T1x S S-1721D1828-M6T1x S 4 R S-1721E2J25-M6T1x S S-1721D3318-M6T1x S 4 S S-1721E3312-M6T1x S Remark 1. Please contact our sales office for products with specifications other than the above. 2. x: G or U 3. Please select products of environmental code = U for Sn 100%, halogen-free products. 34 Z R B H I A X C J 9 M 3 O (e) S-1721 Series E type (b) S-1721 Series B type Product Name Product Name Seiko Instruments Inc. 5 B 5 5 5 5 5 5 5 5 5 5 5 U C D Q L T M G H K N 1.570.03 6 1 5 4 2 3 +0.05 0.08 -0.02 0.5 0.480.02 0.20.05 No. PG006-A-P-SD-2.0 TITLE SNT-6A-A-PKG Dimensions No. PG006-A-P-SD-2.0 SCALE UNIT mm Seiko Instruments Inc. +0.1 o1.5 -0 4.00.1 2.00.05 0.250.05 +0.1 1.850.05 5 o0.5 -0 4.00.1 0.650.05 3 2 1 4 5 6 Feed direction No. PG006-A-C-SD-1.0 TITLE SNT-6A-A-Carrier Tape PG006-A-C-SD-1.0 No. SCALE UNIT mm Seiko Instruments Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. PG006-A-R-SD-1.0 TITLE SNT-6A-A-Reel No. PG006-A-R-SD-1.0 SCALE UNIT QTY. mm Seiko Instruments Inc. 5,000 0.52 1.36 0.52 0.3 0.2 0.3 0.2 0.3 Caution Making the wire pattern under the package is possible. However, note that the package may be upraised due to the thickness made by the silk screen printing and of a solder resist on the pattern because this package does not have the standoff. No. PG006-A-L-SD-3.0 TITLE SNT-6A-A-Land Recommendation PG006-A-L-SD-3.0 No. SCALE UNIT mm Seiko Instruments Inc. 2.90.2 1.90.2 6 0.95 5 1 4 2 3 +0.1 0.15 -0.05 0.95 0.350.15 No. MP006-A-P-SD-1.1 TITLE SOT236-A-PKG Dimensions No. MP006-A-P-SD-1.1 SCALE UNIT mm Seiko Instruments Inc. 4.00.1(10 pitches:40.00.2) +0.1 o1.5 -0 2.00.05 +0.2 o1.0 -0 0.250.1 4.00.1 1.40.2 3.20.2 3 2 1 4 5 6 Feed direction No. MP006-A-C-SD-3.1 TITLE SOT236-A-Carrier Tape No. MP006-A-C-SD-3.1 SCALE UNIT mm Seiko Instruments Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. MP006-A-R-SD-2.1 SOT236-A-Reel TITLE MP006-A-R-SD-2.1 No. SCALE UNIT QTY mm Seiko Instruments Inc. 3,000 www.sii-ic.com * * The information described herein is subject to change without notice. * When the products described herein are regulated products subject to the Wassenaar Arrangement or other agreements, they may not be exported without authorization from the appropriate governmental authority. * Use of the information described herein for other purposes and/or reproduction or copying without the express permission of Seiko Instruments Inc. is strictly prohibited. * The products described herein cannot be used as part of any device or equipment affecting the human body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Seiko Instruments Inc. * Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the failure or malfunction of semiconductor products may occur. The user of these products should therefore give thorough consideration to safety design, including redundancy, fire-prevention measures, and malfunction prevention, to prevent any accidents, fires, or community damage that may ensue. Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein whose related industrial properties, patents, or other rights belong to third parties. The application circuit examples explain typical applications of the products, and do not guarantee the success of any specific mass-production design.