2N2857 Available on commercial versions Qualified Levels: JAN, JANTX, and JANTXV RF and MICROWAVE DISCRETE LOW POWER TRANSISTORS Qualified per MIL-PRF-19500/343 DESCRIPTION The 2N2857 is a military qualified silicon NPN transistor (also available in commercial version), designed for UHF equipment and other high-reliability applications. Common applications include low noise amplifier; oscillator, and mixer applications. Microsemi also offers numerous other products to meet higher and lower power voltage regulation applications. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * JEDEC registered 2N2857. * Silicon NPN, TO-72 packaged UHF transistor. * Maximum unilateral gain = 13 dB (typ) @ 500 MHz. * JAN, JANTX, and JANTXV military qualified versions available per MIL-PRF-19500/343. * RoHS compliant version available (commercial grade only). TO-72 Package Also available in: UB Package (surface mount) 2N2857UB APPLICATIONS / BENEFITS * * Low-power, ultra-high frequency transistor. Leaded metal TO-72 package. o MAXIMUM RATINGS @ T A = +25 C Parameters/Test Conditions Junction and Storage Temperature Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Thermal Resistance Junction-to-Ambient (1) Steady-State Power Dissipation Collector Current Symbol Value T J and T STG V CEO V CBO V EBO R JA PD IC -65 to +200 15 30 3 400 200 40 Notes: 1. Derate linearly 1.14 mW/C for T A > +25 C. Unit o C V V V o C/W mW mA MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com T4-LDS-0223, Rev. 1 (120178) (c)2012 Microsemi Corporation Page 1 of 5 2N2857 MECHANICAL and PACKAGING * * * * * * CASE: Ni plated kovar, Ni cap. TERMINALS: Au over Ni plated kovar leads, solder dipped. MARKING: Manufacturer's ID, date code, part number. POLARITY: See case outline on last page. WEIGHT: 0.322 grams. See Package Dimensions on last page. PART NOMENCLATURE JAN 2N2857 (e3) Reliability Level JAN=JAN level JANTX=JAN level JANTXV=JANTXV level Blank = Commercial RoHS Compliance e3 = RoHS compliant (available on commercial grade only) Blank = non-RoHS compliant JEDEC type number (See Electrical Characteristics table) SYMBOLS & DEFINITIONS Definition Symbol IC IB TA TC V CB V EB Collector current (dc). Base current (dc). Ambient or free air temperature. Case temperature. Collector to base voltage (dc). Emitter to base voltage (dc). T4-LDS-0223, Rev. 1 (120178) (c)2012 Microsemi Corporation Page 2 of 5 2N2857 o ELECTRICAL CHARACTERISTICS @ T C = +25 C OFF CHARACTERISTICS Test Conditions Symbol Value Min. Typ. Max. Unit V (BR)CEO 15 - - V Collector to Emitter Cutoff Current (V CE = 16 V, Bias condition C) I CES - - 100 nA Emitter to Base Cutoff Current (V EB = 3 V, Bias condition D) I EBO - - 10 A Collector to Base Cutoff Current (V CB = 15 V, Bias condition D) I CBO - - 10 nA Unit Collector-Emitter Breakdown Voltage (I C = 3.0 mA, Bias condition D) ON CHARACTERISTICS Test Conditions Symbol Forward Current transfer ratio (I C = 3.0 mA, V CE = 1.0 V) h FE Value Min. Typ. Max. 30 - 150 Collector-Emitter Saturation Voltage (I C = 10 mA, I B = 1 mA) V CE(sat) - 0.4 V Base-Emitter Saturation Voltage (I C = 10 mA, I B = 1 mA) V BE(sat) - 1.0 V DYNAMIC CHARACTERISTICS Test Conditions Symbol Value Min. Typ. Max. Unit Magnitude of common emitter small signal short circuit forward current transfer ratio (V CE = 6 V, Ic = 5 mA, f = 100 MHz) |h fe | 10 - 21 Collector-base time constant (I E = 2.0 mA, V CB = 6.0 V, f = 31.9 MHz) r b 'C c 4 - 15 pF Collector to Base - feedback capacitance (I E = 0 mA, V CB = 10 V, 100 kHz < f < 1 MHz) C cb 1.0 pF Noise Figure (50 Ohms) (I C = 1.5 mA, V CE = 6 V, f = 450 MHz, R g = 50 ) Small Signal Power Gain (common emitter) (I E = 1.5 mA, V CE = 6 V, f = 450 MHz T4-LDS-0223, Rev. 1 (120178) F G pe 4.5 12.5 (c)2012 Microsemi Corporation dB 21 dB Page 3 of 5 2N2857 o Theta ( CW) GRAPHS Time (sec) RJC in Deg C/W FIGURE 1 Maximum Thermal Impedance (R JA ) TH(S) FIGURE 2 Thermal impedance graph (R JC ) T4-LDS-0223, Rev. 1 (120178) (c)2012 Microsemi Corporation Page 4 of 5 2N2857 PACKAGE DIMENSIONS Ltr TL TH HD CD LD LC CH LL P Q 1 2 3 4 Dimensions Inch Millimeters Min Max Min Max .028 .048 .071 1.22 .036 .046 .091 1.17 .209 .230 5.31 5.84 .178 .195 4.52 4.95 .016 .021 .410 .533 .100 TP 2.54 TP .170 .210 4.32 5.33 .500 .750 12.70 19.05 .100 2.54 .040 1.02 Notes 5 5 7, 8 7, 8 7, 8 5 Emitter Base Collector Case NOTES: 1. Dimension are in inches. 2. Millimeters are given for general information only. 3. Beyond r (radius) maximum, TH shall be held for a minimum length of .011 (0.28 mm). 4. Dimension TL measured from maximum HD. 5. Body contour optional within zone defined by HD, CD, and Q. 6. Leads at gauge plane .054 +.001 -.000 inch (1.37 +0.03 -0.00 mm) below seating plane shall be within .007 inch (0.18mm) radius of true position (TP) at maximum material condition (MMC) relative to tab at MMC. The device may be measured by direct methods or by the gauge and gauging procedure shown in figure 2. 7. Dimension LU applies between L1 and L2. Dimension LD applies between L2 and LL minimum. Diameter is uncontrolled in L1 and beyond LL minimum. 8. All four leads. 9. Dimension r (radius) applies to both inside corners of tab. 10. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. 11. Lead 1 = emitter, lead 2 = base, lead 3 = collector, lead 4 = case (electrically connected). T4-LDS-0223, Rev. 1 (120178) (c)2012 Microsemi Corporation Page 5 of 5