CXA-L0605A-VJL/CXA-L0605A-VSL Features Dimming/Connector Type Applications DC-AC Inverter 1 output Usable in a wide range of temperatures Applicable panel size*: 3 to 15 inches With brightness control function (Current dimming). In the high-voltage generator (a terminal and a pattern), an anti-dust measure by silicone application is taken. (Notice) Applicable panel size becomes a standard. F A MED MEASURE CXA-L0605A-VJL / CXA-L0605A-VSL Specifications (Please refer to each specification before use) Electrical Characteristics Item Unit Output Current mArms Connector type/1 output Input Current Oscillatory Frequency Open Circuit Voltage Symbol Iout (Maximum dimmer) A Iout (Minimum dimmer) Iin kHz Freq Vrms Vopen min 5.4 5.3 Specification typ 6 6 max 6.6 6.7 Vin(V) 5 0.5 5 0.5 Vrmt(V) 5 5 2.3 2.9 3.5 5 0.5 5 Condition Vbr(V) Ta() RL(k) 0 23 5 100 0 -20 to +75 90 to 110 3 Remarks (*1) (*1) 23 5 100 (*1) 100 Remote ON - 1.2 1.5 5 0.5 5 0 -20 to +75 50 55 60 5 0.5 5 0 -20 to +75 90 to 110 1600 1800 - 5 0.5 5 0 -20 to +75 Open load (*1) Please refer to the connection diagram for details of a dimming method. Other Specifications Dimming Function Operating Temperature Storage Temperature Operating Humidity Ratio Safety Standard Weight Dimensions (WxDxH) Fused Input Remote ON / OFF Alarm Signal Function Shutdown Function Silicone Coating on High Voltage Area Yes -20 to +75 -30 to +85 RH% 95max. g mm Conformity to RoHs Directive This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. 14typ. 100.5x20.3x8.0 (*2) Yes Yes No No Yes (*2) These dimensions are indicated the maximum. C-22 All specifications are subject to change without notice. CXA-L0605A-VJL/CXA-L0605A-VSL Outline Drawing Label display example Product name, Lot No., country of origin, TDK-Lambda logo DC-AC Inverter CN1 CXA-L0605A-VJL Silicon CN1 CXA-L0605A-VSL Silicon CXA-L0605A-VJL CXA-L0605A-VSL High voltage generating area* (Complete area of 45mm from board end panel) Unit: mm Connector No. Component name Type name Qty Manufacturer Recommended suitable connector Remarks Printed circuit board PCB Composite (CEM-3) 1 UL94V-0 t=1.0 Input connector CN1 53261-0771 1 Molex 51021-0700 Output connector CN2 SM02(8.0)B-BHS-1-TB(LF)(SN) 1 J.S.T Mfg., Co., Ltd BHR-03VS-1 CXA-L0605A-VJL Output connector CN2 SM02B-BHSS-1-TB(LF)(SN) 1 J.S.T Mfg., Co., Ltd BHSR-02VS-1 CXA-L0605A-VSL Terminal Number & Function Input side CN1 Terminal No. CN1-1 CN1-2 CN1-3 CN1-4 Symbol Vin GND Output side CN2 (CXA-L0605A-VJL) Rating 4.5 to 5.5V Power source input 0V CN1-5 Vrmt CN1-6 Vbr 0 to 3V CN1-7 N.C. Terminal No. Symbol Remarks Connector type/1 output *From high-voltage generator, please secure space distance more than 3mm in top and bottom right and left. Rating CN2-1 VHIGH CN2-2 N.C. CN2-3 VLOW Output return Output Ground 0V/2.5V to Vin Remote terminal 0 to 0.4V : OFF 2.5V to Vin : ON Dimmer terminal Because it uses for internal circuit, please be not connected. Output side CN2 (CXA-L0605A-VSL) Terminal No. Symbol Rating CN2-1 VHIGH Output CN2-2 VLOW Output return Connections Operate as follows by switching a SW. Unit operates Operates Does not operate Vbr = 0V: Dimmer MAX. Open RL: Load resistance (7W min.) All specifications are subject to change without notice. C-23