F32_FCR (1/3) Piezoelectronic Products FCR Series Ceramic Resonators Lead FEATURES * The FCR series provide a high degree of stability between the quartz oscillator and the LC or RC oscillating circuits. Temperature characteristics: 1x10-5/C (-20 to +85C). * Highly miniaturized and lightweight, enabling the design of smaller oscillating circuits. * Stable oscillation can be obtained without the time-consuming adjustment typically required with LC and RC oscillating circuits. * Ideal for mass production applications because of adjustments are not required and cost is low. CHARACTERISTICS APPLICATIONS VCRs, automotive electronics, copiers, telephones, facsimiles, calculators with printers, TV remote controls, and toys. Storage temperature range Operating temperature range Frequency tolerance Temperature stability of frequency Time stability PRODUCT IDENTFICATION FCR 4 MC5 A _ _ T (1) (2) (3) (4) (5) (6) * Oscillating frequency can be adjusted using a designated circuit. * The stability of the oscillating frequency is different depending on the IC being used. Please contact TDK for the exact oscillating conditions. (1) Series name (2) Oscillating frequency [fo] (3) Characteristics and shapes RELIABILITY Symbol M2G M5 MC5 Oscillating frequency 15 to 50MHz 3.58 to 10MHz 3.58 to 10MHz Circuit capacitance No built-in No built-in Built-in Type FCR-M2G FCR-M5 FCR-MC5 Shapes/ Dimensions Fig.1 Fig.2 Fig.3 (4) Oscillating frequency tolerance A: 0.3% Non: 0.5% (5) TDK internal code The frequency correlation between the IC and measuring circuits, the allowance, and other identifying factors are used, and the number of digits in the control code is different depending on the contents. However, this control code is omitted from the "standard products". Products with no frequency correlation, and an allowance of 0.5%. (6) Lead shapes and packaging styles T Non Straight lead Straight lead Item Insulation resistance (M)min. DC withstand voltage Edc(V) Specifications Terminal tensile strength No mechanical damage Solder heat resistance -40 to +85C -40 to +85C 0.5% 0.3%[-40 to +85C] 0.3% [over 10 years at 25C] 100 50[1min] Oscillating frequency change: within 0.25% Vibration Acceleration Solderability Resonant resistance change: within 10 More than 95% of the terminal shall be covered with solder. Taping Bulk Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice. Test conditions Between terminals, and between terminal and body Between terminals Terminal's axial direction: 4.9N A direction 90 to the axial direction: 2.45N 2605C,100.5s 35010C, 30.5s 2705C, 30.5s Frequency: 10 to 55Hz Amplitude: 1.52mm X, Y, Z directions, 2h 100Gal X, X', Y, Y', Z, Z' 6 directions x 3 times 2300.5C, 30.5s melted solder F32_FCR (2/3) Piezoelectronic Products FCR Series Ceramic Resonators Lead STANDARD TEST CIRCUIT Type VDD 14 FCR-M5 IC FCR-M2G 1 2 3 4 7 Rf Frequency range 3.58 to 7.99MHz 8 to 10MHz 15 to 16.9MHz 17 to 19.9MHz 20 to 29.9MHz 30 to 39.9MHz 40 to 50MHz IC name TC4069UBP TC4069UBP TC74HCU04 TC74HCU04 TC74HCU04 TC74HCU04 TC74HCU04 VDD +5V +5V +5V +5V +5V +5V +5V Rf 1M 1M 1M 1M 1M 1M 1M CL1 30pF 20pF 30pF 22pF 15pF 10pF 5pF CL2 30pF 20pF 30pF 22pF 15pF 10pF 5pF 0V 1 3 CL1 To frequency counter CL2 0V SHAPES AND DIMENSIONS EXTERNAL LOAD CAPACITANCE TYPE FCR-M2G(15 to 50MHz) 9max. BUILT-IN LOAD CAPACITANCE TYPE FCR-MC5(3.58 to 10MHz) FCR-M5(3.58 to 10MHz) 4max. 9.5max. 5max. 9.5max. CIRCUIT DIAGRAM 5max. 50.5 6.5max. 3 X 4.0MC5 TDK C 50.5 6.5max. 4.0M5 TDK 50.5 50.5 6.5max. 1 16.0M2G TDK C 2 50.5 o0.550.1 o0.550.1 Fig. 1 2.50.3 2.50.3 Fig. 2 Fig. 3 o0.550.1 Dimensions in mm ELECTRICAL CHARACTERISTICS Part No. Fig. Oscillating frequency FCR-M2G Type 16MHz FCR16.0M2G_1_2 FCR24.0M2G_ _ 24MHz 1 FCR32.0M2G_ _ 32MHz FCR50.0M2G_ _ 50MHz FCR-M5 Type FCR4.0M5_ _ 4MHz FCR4.19M5_ _ 4.19MHz FCR6.0M5_ _ 2 6MHz FCR8.0M5_ _ 8MHz FCR10.0M5_ _ 10MHz FCR-MC5 Type FCR4.0MC5_ _ 4MHz FCR4.19MC5_ _ 4.19MHz FCR6.0MC5_ _ 6MHz 3 FCR8.0MC5_ _ 8MHz FCR10.0MC5_ _ 10MHz 1 _: Please specify oscillating frequency tolerance A: 0.3%, Non: 0.5% 2 _: Please specify lead shapes and packaging styles T: Straight lead/Taping Non: Straight lead/Bulk Oscillating frequency tolerance Load capacitance C1, C2 0.3, 0.5% 0.3, 0.5% 0.3, 0.5% 0.3, 0.5% 15pF 10pF 5pF 5pF 0.3, 0.5% 0.3, 0.5% 0.3, 0.5% 0.3, 0.5% 0.3, 0.5% 30pF 30pF 30pF 20pF 20pF Shear oscillation in thickness direction 0.3, 0.5% 0.3, 0.5% 0.3, 0.5% 0.3, 0.5% 0.3, 0.5% 30pF (Built-in capacitance) 30pF (Built-in capacitance) 30pF (Built-in capacitance) 20pF (Built-in capacitance) 20pF (Built-in capacitance) Shear oscillation in thickness direction Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice. Vibration mode Thickness direction expand oscillation Shear oscillation in thickness direction F32_FCR (3/3) Piezoelectronic Products FCR Series Ceramic Resonators Lead TAPING SPECIFICATIONS FCR-M2G, -M5 (Fig. 1) h 1 0 h 2 h 1 0 h 2 W0 W W1 W2 P1 F1 H0 H1 P P0 oD 0 d FCR-MC5 (Fig. 2) h 1 0 h 2 h 1 0 h 2 F2 P0 d W W0 W1 F1 W2 P1 H0 H1 P Dimensions in mm Type FCR-M2G, -M5 FCR-MC5 Fig. 1 2 P 12.71 12.71 12.70.3 12.70.3 P01 3.851.3 3.851.3 P1 50.3 2.50.3 F1, F22 W 18+1, -0.5 18+1, -0.5 11.5min. 11.5min. W0 90.5 90.5 W1 5max. 5max. W2 160.5/18+1.5, -0 160.5/18+1.5, -0 H03 o40.2 o40.2 D0 h1, h24 02 02 d 0.550.1 0.550.1 30max. 30max. H1 1 The cumulative pitch tolerance is 1mm at 20 pitches. 2 The measurement position is the top of the tape and between the leads. 3 The measurement position is under the stopper. 16mm: PANAMOUNT 18mm: AVIMOUNT 4 The measurement position is at a product of the top. oD 0 F32_FCR 000829 Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice.