KBP0 SERIES
2.0 AMPERE SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE RANGE
50 to 1000 Volts PRV
CURRENT
2.0 Amperes
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
FEATURES
Plastic material has Underwriters Laboratory
flammability classification 94V-0.
Low leakage.
Surge overload rating - 50 amperes peak.
Ideal for printed circuit boards.
Exceeds environmental standards of
MIL - STD - 19500.
MECHANICAL DATA
: Reliable low cost construction utilizing
: moulded plastic technique results in
: inexpensive product.
: Leads, solderable per MIL - STD - 202,
: Method 208.
: Polarity symbols printed on body.
: 0.1 ounce, 2.8 grams.
Case
Terminals
Polarity
Weight
Dimensions in millimetres
13.0
max
12.0
min
18.0
max
Ø 0.8 4.1
3.6
+~~±
6.6
max
2.1
KBP005
Maximum Recurrent Peak Reverse Voltage
Maximum Bridge Input Voltage RMS
Maximum DC Blocking Voltage
Maximum Average Forward Current at
TA = 25
Peak Forward Surge Current, 8.3 ms single
half sine - wave superimposed on rated load
KBP01 KBP02 KBP04 KBP06
50
50
100
100
200
200
400
400
600
600
800
800
1000
1000
35 70 140 280 420 560 700
2.0
50
TA = 25°C
Storage Temperature Range
Maximum Forward Voltage Drop
per Element at 1.0A
Maximum Reverse Current at Rated DC
Blocking Voltage per Element
Operating Temperature Range
1.1
10.0
1.0
- 55 to + 125
- 55 to + 150
KBP08
VRRM
VRMS
VDC
IF(AV)
IFSM
IR
TJ
TSTG
VF
°C (see Fig 2)
(see Fig 1)
(see Fig 3)
(see Fig 4)
V
V
A
A
V
V
µA
mA
°C
°C
TA = 100°C
KBP10
Reformatted by Anglia 9907
RATING AND CHARACTERISTIC CURVES
KBP0 SERIES
Reformatted by Anglia 9907
INSTANTANEOUS FORWARD
VOLTAGE, VOLTS
FIG 3 : TYPICAL FORWARD
CHARACTERISTICS PER ELEMENT
20 40 60 80 100 120 140
0
.5
1.0
1.5
2.0
Resistive or
Inductive
Load
FIG 2 : DERATING CURVE FOR
RECTIFIED OUTPUT CURRENT
AMBIENT TEMPERATURE °C
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
0 20 40 60 80 100 120 140
.01
0.1
1.0
10
PERCENT OF RATED PEAK
REVERSE VOLTAGE
INSTANTANEOUS REVERSE
CURRENT, MICROAMPERES
FIG 4 : TYPICAL REVERSE
CHARACTERISTICS PER ELEMENT
TJ = 100°C
TJ = 25°C
.01
0.1
1.0
10
0.4 0.6 0.8 1.0 1.2 1.4
INSTANTANEOUS FORWARD
CURRENT, AMPERES
TJ = 25°C
Pulse Width = 300µs
FIG 1 : MAXIMUM NON-REPETITIVE
SURGE CURRENT PER ELEMENT
1 10 100
0
10
20
30
40
50
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE
CURRENT, AMPERES
8.3ms Single Half Sine Wave
TJ = 125°C
