8 7 THIS DRAWING [S UNPUBLISHED. RELEASED FOR PUBLICATION =e tS = By Too eecTRomcs corporanion. t - cowrean - MECHANICAL: [= 0.725 MAX | l= 0.850 MAX J N 0.625 L-cL 29099 = 0.645 0.555 0.660 +.015 .000 0.600 MAX Ru-1 0.425 _-| 714P1 SERIES MAGNETIC CIRCUIT AA TOP OF PCB (=) RDP () RDN (00) (nm) RCT S) +.015 0.5751 018 | 0.010 Suggested Panel Cutout ] oO oso ho LOL LOL | 5 a Zz a Za x< x K x a ew FF C1 = 1000 pF, 2KV CAPACITOR R1-R4 = 75 OHMS, 1/16 W RESISTORS Lo rasz0.0 0 @0.062(2x) @0.126(2X) \ 0.050 TYP 0.100 TYP 0.350 \ 7 NN 7 _ ee Pin Designations 0.050 TYP @0.035(8x) ost REVISIONS AA |22 FT or Lo | APS [B | REV PER Eco-09-000302 [romar2ooe] VL | LR AX MATERIALS HOUSING - THERMOPLASTIC PET POLYESTER FLAMMABILITY RATING UL 94V-0 SHIELD - 010" THICK, C26800 BRASS PREPLATED WITH 30,INCH MIN SEMI-BRIGHT NICKEL, SOLDER TABS POST DIPPED WITH 100uINCH MIN SAC SOLDER MOD JACK CONTACTS - 0.0157 X 0.018" PHOSPHOR BRONZE, SOwINCH MIN OVERALL NICKEL UNDERPLATE WITH SELECT SOuINCH MIN HARD GOLD FINISH PLATE SOLDERTAILS WITH 100,INCH MIN MATTE TIN AND/OR SAC SOLDER DIP AX RJ&5 JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS PART 68, SUB PART F AX MAGNETICS 0.272 MIN 0.450 Suggested PCB Layout -IMPEDANCE: 100 OHMS -TURNS RATIO (CHIP-CAB -OPEN CIRCUIT INDUCTAN 8mADC BIAS FROM 0C -PERFORMANCE @ 25C INSERTION LOS RETURN LOSS LE} TX =11,RX 211 CE (OCL): 350yH MIN @100KHz, 0.1VRMS, {0 70C, TX AND RX E TO {RL} 18dB MIN FROM 0.5MHZ TO 30MHz 8-20L0G(f/30}dB MIN FROM 30.1MHz TO 60MHz 12dB MIN FROM 60.1MHz TO 80MHz CROSSTALK ATTENUATION: 35dB MIN FROM 0.5MHz TO 40MHz 33-20*LOG(f/50}dB MIN FROM 40.1MHz TO 100MHz COMMON MODE REJECTION RATIO (CMRR): 30dB MIN FROM 0.S5MHz TO 100MHz -ISOLATION VOLTAGE: COMPLIES WITH IEEE802.3 2002, PARA 23.5.1.1, ITEM b 25C SAIL} 1.1dB MAX FROM 0.5MHz TO 100MHz RL | 4. OPERATING TEMPERATURE: FROM 0C TO +70C Ay INDICATED CONNECTIONS ARE FOR NIC CONFIGURATION, THE MAGNETICS ARE ASYMMETRICAL, AND THEREFORE DOD NOT SUPPORT AUTO-MDI/MDIX AX TYCO ELECTRONICS LOGO, PART NUMBER, DATE C N CODE, COUN AGENCY APPROVAL MARKING IN APPROXIMATE LOC Ss E OF ORIGIN AND ATION N TRY HOW 7. THE PART IS RECOMMENDED FOR WAVE SOLDERING PROCESS, PREHEAT TEMPERATURE IS 120C TO 160C, 120 SECONDS TO 180 SECONDS, PEAK WAVE SOLDERING TEMPERATURE IS 260C MAX, 10 SECONDS MAX 6605712-1 PART NUMBER THIS DRAWING IS A CONTROLLED DOCUMENT. | = poke | = aK TIMAROS Tyco Electronics OMENSIONS: 70 TIMARGS | WME Tyeo Electrenics Corporation ChangPing, China g a 8 |D. FAROLE 1X1 MAG4S(TM), 7N2P1 SCHEMATIC, PRODUCT SPEC 714 SERIES CIRCUIT, WITH DECOUPLING CAPACITOR, 108-2100 NO LEDS He He He gis 3 10 PLC 1 PLO 12 PLC is PLC ous APPLICATION SPEC 4 PLC -a _ SIZE | CAGE CODE [ORAWING NO RESTRICTED TO) WATER A FINISH K WOOHT _ Al 0077916660571 2 = CUSTOMER DRAWING nts F171 eB AMP 4805 REV 31MAR2000