© Semiconductor Components Industries, LLC, 2008
June, 2008 − Rev. 7
1Publication Order Number:
MBR2515L/D
MBR2515L
SWITCHMODEt
Power Rectifier
Features and Benefits
•Low Forward Voltage
•Low Power Loss/High Efficiency
•High Surge Capacity
•100°C Operating Junction Temperature
•25 A Total
•Pb−Free Packages are Available*
Applications
•Power Supply – Output Rectification
•Power Management
•Instrumentation
Mechanical Characteristics
•Case: Epoxy, Molded
•Epoxy Meets UL 94, V−0 @ 0.125 in
•Weight: 1.9 Grams (Approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•Lead Temperatures for Soldering Purposes: 260°C Max. for 10 Seconds
•ESD Rating: Human Body Model 3B
Machine Model C
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
Device Package Shipping
ORDERING INFORMATION
MBR2515L TO−220
TO−220AC
CASE 221B
STYLE 1
50 Units/Rail
SCHOTTKY BARRIER
RECTIFIER
25 AMPERES, 15 VOLTS
4
1
3
MBR2515LG TO−220
(Pb−Free)
50 Units/Rail
http://onsemi.com
3
4
1
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
B2515L = Device Code
KA = Diode Polarity
AY WWG
B2515L
KA
MARKING
DIAGRAM
MBR2515L
http://onsemi.com
2
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
15 V
Average Rectified Forward Current
(TC = 91°C per Device)
IF(AV)
25
A
Peak Repetitive Forward Current, per Leg (Square Wave, 20 kHz, TC = 95°C) IFRM 25 A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz)
IFSM 150 A
Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz) IRRM 1.0 A
Storage Temperature Range Tstg −65 to +125 °C
Operating Junction Temperature TJ−65 to +100 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
THERMAL CHARACTERISTICS
Characteristic Conditions Symbol Max Unit
Maximum Thermal Resistance, Junction−to−Case Min. Pad RqJC 1.0 °C/W
Maximum Thermal Resistance, Junction−to−Ambient Min. Pad RqJA 70
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Min Typical Max Unit
Instantaneous Forward Voltage (Note 1)
(iF = 25 Amps, Tj = 25°C)
(iF = 25 Amps, Tj = 70°C)
(iF = 19 Amps, Tj = 70°C)
vF
−
−
−
0.41
0.37
0.34
0.45
0.42
0.38
V
Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, Tj = 25°C)
(Rated dc Voltage, Tj = 70°C)
iR
−
−
1.0
24
15
200
mA
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
MBR2515L
http://onsemi.com
3
Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage
VF
, INSTANTANEOUS FORWARD VOLTAGE (V) VF
, INSTANTANEOUS FORWARD VOLTAGE (V)
0.50.40.30.20.10
0.1
1.0
10
100
0.1
1.0
10
100
IF
, INSTANTANEOUS FORWARD CURRENT (A)
0.6
25°C
IF
, INSTANTANEOUS FORWARD CURRENT (A)
100°C
70°C
0.50.40.30.20.10 0.6
25°C
100°C
70°C
Figure 3. Typical Reverse Current Figure 4. Current Derating, Case, Per Leg
VR, REVERSE VOLTAGE (V)
105.0
0.1
1.0
10
1000
IR, REVERSE CURRENT (mA)
15
Figure 5. Current Derating, Ambient, Per Leg Figure 6. Forward Power Dissipation
TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (A)
7550250
00
8.0
10
14
IF(AV), AVERAGE FORWARD CURRENT (A)
100
PF(AV), AVERAGE POWER DISSIPATION (W)
14128.06.02.0026
100
25°C
100°C
70°C
12
4.0
6.0
4.0
2.0
10 201816 2422
TJ = 100°C
dc
Square Wave
20
22
18
16
12
14
10
8.0
4.0
6.0
2.0
dc
Square Wave
dc
TC, CASE TEMPERATURE (°C)
0
4
8
12
16
80 85 90 95 100 10
5
SQUARE
IF(AV), AVERAGE FORWARD
CURRENT (A)
75
20
24
28
dc
RqJA = 16°C/W
RqJA = 70°C/W
(No Heat Sink)
32
36
40
MBR2515L
http://onsemi.com
4
PACKAGE DIMENSIONS
TO−220
CASE 221B−04
ISSUE E
STYLE 1:
PIN 1. CATHODE
2. N/A
3. ANODE
4. CATHODE
B
R
J
D
G
L
H
QT
U
A
K
C
S
4
13
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.595 0.620 15.11 15.75
B0.380 0.405 9.65 10.29
C0.160 0.190 4.06 4.82
D0.025 0.035 0.64 0.89
F0.142 0.161 3.61 4.09
G0.190 0.210 4.83 5.33
H0.110 0.130 2.79 3.30
J0.014 0.025 0.36 0.64
K0.500 0.562 12.70 14.27
L0.045 0.060 1.14 1.52
Q0.100 0.120 2.54 3.04
R0.080 0.110 2.04 2.79
S0.045 0.055 1.14 1.39
T0.235 0.255 5.97 6.48
U0.000 0.050 0.000 1.27
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
F
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
MBR2515L/D
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loca
l
Sales Representative
