TMC Series Established Reliability TACmicrochipTM KEY FEATURES * * * * Weibull graded Reliability 0.1% / K hrs Low leakage Conformance testing (Lot by Lot) * Extended traceability * Approved for use in life support medical devices CASE DIMENSIONS: millimeters (inches) L EIA Code Code POLARITY BAND NOT TO EXCEED CENTER LINE Lt %K 0402 1005-05 L 0603 1608-08 R W Length (L) Width (W) A 0805 2012-12 1206 3216-16 Height (H) Termination Length (Lt) Typical Mass 0.10 (0.004) 2.0mg 0.15 (0.006) 8.6mg 0.15 (0.006) 29.9mg 0.15 (0.006) 44.6mg 1.00 +0.20 -0.00 0.50 +0.20 -0.00 0.50 +0.20 -0.00 (0.039 +0.008 ) -0.000 (0.020 +0.008 ) -0.000 (0.020 +0.008 ) -0.000 +0.20 +0.25 % H S EIA Metric 1.60 -0.15 (0.063 +0.010 -0.006 ) 0.85 -0.10 (0.033 +0.008 -0.004 ) 2.00 +0.25 -0.15 1.35 -0.10 (0.053 +0.008 ) +0.20 (0.079 +0.010 ) -0.006 -0.004 +0.00 1.60 -0.20 (0.063 +0.000 ) -0.008 3.200.20 (0.1260.008) +0.20 0.85 -0.00 (0.033 +0.008 -0.004 ) +0.20 1.35 -0.10 (0.053 +0.008 ) -0.004 +0.00 1.60 -0.20 (0.063 +0.000 ) -0.008 HOW TO ORDER TMC R 106 M 010 E ** Type TACmicrochipTM Case Code 0402=K 0603=L 0805=R 1206=A Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance K=10% M=20% Rated DC Voltage 002=2Vdc 003=3Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc Packaging E = Non Modular Tin Termination D = Non Modular Gold Termination (see table below) Additional characters may be add for special requirements Packaging Suffix RTA - Std. termination (Nickel & Tin) supplied on plastic embossed tape on a 4mm pitch in a 7" diameter reel. XTA - Std. termination (Nickel & Tin) supplied on plastic embossed tape on a 4mm pitch in a 4.25" diameter reel. PTA - Std. termination (Nickel & Tin) supplied on punched paper tape on a 2mm pitch in a 7" diameter reel. QTA - Std. termination (Nickel & Tin) supplied on punched paper tape on a 2mm pitch in a 4.25" diameter reel. ATA - Nickel & thin Gold plated termination, supplied on plastic embossed tape on a 4mm pitch in a 7" diameter reel. FTA - Nickel & thin Gold plated termination, supplied on plastic embossed tape on a 4mm pitch in a 4.25" diameter reel. Packaging Suffix Standard Standard Reel Tin Termination Tin Termination Gold Termination Size Plastic Tape Paper Tape Plastic Tape 1206/0805/0603 0402 1206/0805/0603 7" Rxx Pxx Axx Xxx Qxx Fxx 414" ESTABLISHED RELIABILITY RANGE (EIA Sizes) Capacitance Cap. (F) Code 0.33 334 0.47 474 0.68 684 1.0 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 220 227 Available Ratings 3.0V (LETTER DENOTES CASE SIZE) Voltage Rating DC (VR) at 85C 4.0V 6.3V K K R R R R R R L R R R 10V 16V K/L K/L L L L L/R R R R R A L L L L R A A TAK Developmental Ratings - subject to change 39 TMC Series Established Reliability TACmicrochipTM Production Processing, Test, and Inspection Simulated Function Test 100% Thermal Shock Conditioning MIL-STD-202, Method 107, Condition F (10 cycles) 20 pc random sample selected Additional Function Tests Solderability Test, MIL-C-55365 n = -13, c = 0 Electrical Measurements Cap, DF, ESR & DCL 100% Weibull Grading to FRL B minimum Pass Simulated Mounting (1.3*WVDC @ 85C for 40 hours, minimum) 30 sec @ 235C Simulated Rework Repeat Mounting Procedure 2 times 100% Elec. Test Simulated Preconditioning 24 hours @ 150C Thermal Shock MIL-STD-202, Method 107, Condition F (10 cycles) Electrical Measurements Cap, DF, ESR, & DCL 100% Mech. Insp. Receipt to inventory for shipment Simulated Life Test Fail AQL Electrical Inspection AQL Mechanical Inspection Pass 1.3*WVDC @ 85C for 6 hours (accel = 279.15) Fail Electrical Measurements Cap, DF, ESR & DCL c=0 Pass Note: Under specific conditions, contained in documented procedures, a lot that fails inspection may be re-tested and/or reworked for resubmissions. Electrical test parameters are set in accordance with customer's specification. 40