Go To Image Index Wiha Quality Tools Go To Numerical Index www.wihatools.com 113 Wiha ComfortGrip Pliers ComfortGrip Long Nose Pliers 329 Long Nose Pliers With Cutting Edge DIN ISO 5745 Long nose pliers. Extra long cutters for flat and round wires. Gripping surfaces serrated in parts. Cutting edges additionally induction hardened to approx. 60 HRC. Special tool steel. Two component ComfortGrip handle. SHOP Item No. 329 19 Z05016005 329 22 Z05020005 mm 160 200 Inch 6.3 8.0 Cutting Capacity Copper AWG Pkg. wt. #10 #8 1 1 .32 .42 329 Bent Nose Pliers With Cutters DIN ISO 5745 Long nose pliers angled approx. 40O. Extra long cutting edge for flat and round wires. Gripping surfaces serrated in parts. Cutting edges additionally induction hardened to approx. 60 HRC. Special tool steel. Two component ComfortGrip handle. ComfortGrip Bent Long Nose Pliers Angled approx. 40 O SHOP ComfortGrip Flat Nose Pliers Item No. 329 24 Z05116005 329 25 Z05120005 mm 160 200 Cutting Capacity Copper AWG Pkg. wt. Inch 6.3 8.0 #10 #8 1 1 .32 .42 329 31 Long Flat Nose Pliers DIN ISO 5745 Extra long head. Gripping surfaces serrated and induction hardened. Special tool steel. Two component ComfortGrip handle. Gripping and right-angled bending of wires and sheet metal parts. SHOP ComfortGrip Diagonal Cutters Item No. 329 31 Z07016005 mm 160 Inch 6.3 Pkg. 1 wt. .32 I N D E X 329 Diagonal Cutters DIN ISO 5749 Low wear lap joint, riveted and able to withstand high levels of load. Low force action, clean cutting. Long life cutting edge is achieved with additional induction hardening to approx. 60 HRC. Special CV tool steel forgings hardened and tempered. For soft & medium hard wire. SHOP ComfortGrip High Leverage Diagonal Cutters SHOP PREVIOUS Item No. 329 36 Z12014005 329 40 Z12016005 329 43 Z12018005 mm 140 160 180 Inch 5.5 6.3 7.0 Cutting Capacity Copper AWG #6 #6 #6 Pkg. 1 1 1 wt. .39 .48 .62 329 High Leverage Diagonal Cutters DIN ISO 5749 Semi-circular. Low wear lap joint, riveted and able to withstand high levels of load. Low force action, clean cutting. Long life cutting edges are achieved through additional induction hardening to approx. 64 HRC. C60 special CV tool steel hardened and tempered. Item No. 329 49 Z16016005 329 50 Z16018005 329 53 Z16020005 NEXT mm 160 180 200 Inch 6.3 7.0 8.0 Cutting Capacity Copper AWG #6 #5 #4 Pkg. 1 1 1 wt. .48 .57 .64