www.wihatools.com
Wiha Quality Tools
113
ComfortGrip Long Nose Pliers
ComfortGrip Bent Long Nose Pliers
ComfortGrip Flat Nose Pliers
Item
No. mm Inch Pkg. wt.
329 19 Z05016005 160 6.3 #10 1 .32
329 22 Z05020005 200 8.0 #8 1 .42
Long Nose Pliers With Cutting Edge DIN ISO 5745
Long nose pliers. Extra long cutters for flat and round wires.
Gripping surfaces serrated in parts. Cutting edges additionally induction
hardened to approx. 60 HRC. Special tool steel. Two component
ComfortGrip handle.
329
Item
No. mm Inch Pkg. wt.
329 31 Z07016005 160 6.3 1 .32
Long Flat Nose Pliers DIN ISO 5745
Extra long head. Gripping surfaces serrated and induction hardened.
Special tool steel. Two component ComfortGrip handle. Gripping and
right-angled bending of wires and sheet metal parts.
329 31
Item
No. mm Inch Pkg. wt.
329 24 Z05116005 160 6.3 #10 1 .32
329 25 Z05120005 200 8.0 #8 1 .42
Bent Nose Pliers With Cutters DIN ISO 5745
Long nose pliers angled approx. 40O. Extra long cutting edge for flat
and round wires. Gripping surfaces serrated in parts. Cutting edges
additionally induction hardened to approx. 60 HRC. Special tool steel.
Two component ComfortGrip handle.
329
Angled approx. 40O
Wiha ComfortGrip Pliers
Cutting Capacity
Copper AWG
Cutting Capacity
Copper AWG
Item
No. mm Inch Pkg. wt.
329 36 Z12014005 140 5.5 #6 1 .39
329 40 Z12016005 160 6.3 #6 1 .48
329 43 Z12018005 180 7.0 #6 1 .62
Diagonal Cutters DIN ISO 5749
Low wear lap joint, riveted and able to withstand high levels of load.
Low force action, clean cutting. Long life cutting edge is achieved with
additional induction hardening to approx. 60 HRC. Special CV tool steel
forgings hardened and tempered. For soft & medium hard wire.
329
Item
No. mm Inch Pkg. wt.
329 49 Z16016005 160 6.3 #6 1 .48
329 50 Z16018005 180 7.0 #5 1 .57
329 53 Z16020005 200 8.0 #4 1 .64
High Leverage Diagonal Cutters DIN ISO 5749
Semi-circular. Low wear lap joint, riveted and able to withstand high
levels of load. Low force action, clean cutting. Long life cutting edges
are achieved through additional induction hardening to approx. 64 HRC.
C60 special CV tool steel hardened and tempered.
329
ComfortGrip Diagonal Cutters
ComfortGrip High Leverage Diagonal Cutters
Cutting Capacity
Copper AWG
Cutting Capacity
Copper AWG
Go To
Image Index
Go To
Numerical Index
I
N
D
E
X
SHOP
SHOP
SHOP
SHOP
SHOP
PREVIOUS NEXT
