GP2Y0D310K GP2Y0D310K Distance Measuring Sensor Unit Digital output (100 mm) type Description Agency approvals/Compliance GP2Y0D310K0F is a distance measuring sensor unit, composed of an integrated combination of PSD (position sensitive detector) , IRED (infrared emitting diode) and signal processing circuit. The variety of the reflectivity of the object, the environmental temperature and the operating duration are not influenced easily to the distance detection because of adopting the triangulation method. The output voltage of this sensor stays high in case an object exists in the specified distance range. So this sensor can also be used as proximity sensor. 1. Compliant with RoHS directive (2002/95/EC) Applications 1. Touch-less switch (Sanitary equipment, Control of illumination, etc.) 2. Robot cleaner 3. Amusement equipment (Robot, Arcade game machine) Features 1. Digital output type 2. Detecting distance : Typ. 100 mm 3. Compact type Package size : 15x9.6x8.7 mm 4. Consumption current : Typ. 31 mA 5. Supply voltage : 4.5 to 5.5 V 6. High-speed measurement cycle : 8 ms Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: E4-A00701EN Date Dec.01.2006 1 (c)SHARP Corporation GP2Y0D310K Block diagram VCC GND Signal processing circuit Voltage regulator C1 REG PSD Oscillation circuit LED drive circuit VO Output circuit LED R1 LED_FB Distance measuring IC R1 (LED current adjustment resistance=1 (LED current TYP 300mA) C1=0.1F Outline Dimensions (Unit : mm) Stamp (Example) s 310K 5X SHARP Model name s 310K 5X Month(1 to 9,X,Y,Z) Year(2005:5) Light emission (8.4) 4 2 8.24 9.6 (4.22) (3.68) 3.1 2.5 * Detector lens (10) (2.8) 4 (Root of terminal) (2.965) Emitter lens MAX0.6 Lever cutting remainder 15 3.7 (3) 0.25 Light emission (4.9) 1 7 2 3 4 6 (2-0.3) Terminal No. 1 2 3 4 5 6 2-1.6 8.7 Standard Surface 5 6 5-0.5 (2-0.3) 6 GP2Y0D310K 1 6 Symbol VCC LED_FB VO GND Reg 2 R 3 4 5 C 4-P2.5 C=0.1F R=1 14.7 (Root of terminal) * Position of the detector lens is not fixed because the sensor output is adjusted by moving the lens. Note 1. Unspecified tolerances shall be 0.3 mm. Note 2. ( ):Reference value Note 3. Terminal No.7 which connect LED cathode is used for testing Please this terminal don' t use Product mass : Approx. 1.5g Sheet No.: E4-A00701EN 2 GP2Y0D310K Absolute Maximum Ratings Parameter Supply voltage Output terminal voltage Operating temperature Storage temperature (Ta=25,VCC=5V) Symbol VCC VO Topr Tstg Rating -0.3 to +7 -0.3 to VCC+0.3 -10 to +60 -20 to +70 Unit V V Electro-optical Characteristics Parameter Output terminal voltage Detecting distance Average supply current Symbol VOH VOL L ICCL ICCH (Ta=25, Vcc=5V) Conditions Output voltage at high level Output voltage at Low level Note (1) (2) (3) R1 = 1 (detection) R1 = 1 (non detection) MIN. TYP. Vcc-0.3 80 100 31 18 MAX. 0.6 120 50 35 Unit V V mm mA mA * L : Distance to reflective object (Note 1) Using reflective object : White paper (Made by Kodak Co., Ltd. gray cards R-27*white face, reflectance; 90%) (Note 2) The individual product shall be adjusted to have L = 100 20 mm as the distance before shipping detecting. (Note 3) Output voltage switch has a hysteresis width. The distance specified by L should be the distance which the output turns from L to H in case an object moves to the sensor. Recommended operating conditions Parameter Supply voltage Symbol VCC Rating 4.5 to 5.5 Unit V Sheet No.: E4-A00701EN 3 GP2Y0D310K Fig. 1 Timing chart Vcc (Power supply) TYP 2.6 ms Distance measuring operating Vo (Output) Stand-by TYP 5.5 ms TYP 5.5 ms First measurement Second measurement Unstable output MAX 12 ms First output nth measurement Second output nth output MAX 8.5 ms Sheet No.: E4-A00701EN 4 GP2Y0D310K Fig. 2 Example of Output distance characteristics HL Output [V] H Hysteresis width L LH 0 20 40 60 80 100 Distance to reflective object L [mm] 120 140 160 180 200 220 240 Set-up detection distance L = 100 mm 20 mm Sheet No.: E4-A00701EN 5 GP2Y0D310K Notes Advice for the optics * The lens of this device needs to be kept clean. There are cases that dust, water or oil and so on deteriorate the characteristics of this device. Please consider in actual application. * Please don't do washing. Washing may deteriorate the characteristics of optical system and so on. Please confirm resistance to chemicals under the actual usage since this product has not been designed against washing. Advice for the characteristics * In case that an optical filter is set in front of the emitter and detector portion, the optical filter which has the most efficient transmittance at the emitting wavelength range of LED for this product ( = 870 70nm), shall be recommended to use. Both faces of the filter should be mirror polishing. Also, as there are cases that the characteristics may not be satisfied according to the distance between the protection cover and this product or the thickness of the protection cover, please use this product after confirming the operation sufficiently in actual application. * In case that there is an object near to emitter side of the sensor between sensor and a detecting object, please use this device after confirming sufficiently that the characteristics of this sensor do not change by the object. * When the detector is exposed to the direct light from the sun, tungsten lamp and so on, there are cases that it can not measure the distance exactly. Please consider the design that the detector is not exposed to the direct light from such light source. * Distance to a mirror reflector can not be sometimes measured exactly. In case of changing the mounting angle of this product, it may measure the distance exactly. * In case that reflective object has boundary line which material or color etc. are excessively different, in order to decrease deviation of measuring distance, it shall be recommended to set the sensor that the direction of boundary line and the line between emitter center and detector center are in parallel. (Incorrect) (Correct) * In order to decrease deviation of measuring distance by moving direction of the reflective object, it shall be recommended to set the sensor that the moving direction of the object and the line between emitter center and detector center are vertical. (Incorrect) (Correct) (Moving direction) (Moving direction) Advice for the power supply * In order to stabilize power supply line, we recommend to insert a by-pass capacitor of 47F or more between Vcc and GND near this product. Notes on handling * There are some possibilities that the internal components in the sensor may be exposed to the excessive mechanical stress. Please be careful not to cause any excessive pressure on the sensor package and also on the PCB while assembling this product. * Soldering shall be done with a soldering iron and below 260, less than 5s and maximum 2 times. Also, please pay attention not to put outer force on lead terminals while soldering. Please do not apply flow soldering because it may damage optical lens of the device. Sheet No.: E4-A00701EN 6 GP2Y0D310K Presence of ODC etc. This product shall not contain the following materials. And they are not used in the production process for this product. Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform) Specific brominated flame retardants such as the PBB and PBDE are not used in this product at all. This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC). * Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE). Sheet No.: E4-A00701EN 7 GP2Y0D310K Package specification Product Tray Tray section Product MAX. 200 pieces per tray Sheet No.: E4-A00701EN 8 GP2Y0D310K Important Notices * The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii) SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). * Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. * Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection * If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices. * This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. * Contact and consult with a SHARP representative if there are any questions about the contents of this publication. Sheet No.: E4-A00701EN 9