SPEC NO: DSAM8461 REV NO: V.2A DATE: MAR/28/2015 PAGE: 1 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301003059
26mm (1.02 INCH) SINGLE DIGIT NU MERIC
DISPLAY
Part Number: SC10-11SYKWA
Super Bright Yellow
Features
z1.02 inch digit height.
zLow current operation.
zExcellent character appearance.
zHigh light output.
zEasy mounting on P.C. boards or sockets.
zMechanically rugged.
zStandard : gray face, white segment.
zRoHS compliant.
Description
The Super Bright Yellow device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ± 0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAM8461 REV NO: V.2A DATE: MAR/28/2015 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301003059
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA Description
Min. Typ.
Super Bright Yellow (AlGaInP) White Diffused
150000 400000
Common Cathode,
Rt. Hand Decimal.
*52000 *140000
SC10-11SYKWA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Yellow 590 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Yellow 590 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA
C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz
VF [2] Forward Voltage
(DP) Super Bright Yellow 4.0
(2.0)
5.0
(2.5) V IF=20mA
IR Reverse Current
(Per chip) Super Bright Yellow 10 uA VR=5V
Parameter Super Bright Yellow Units
Power dissipation
(Per chip) 75 mW
DC Forward Current (DP) 30
(30) mA
Peak Forward Current [1] (DP) 175
(175) mA
Reverse Voltage
(Per chip)
5
(5) V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAM8461 REV NO: V.2A DATE: MAR/28/2015 PAGE: 3 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301003059
Super Bright Yellow SC10-11SYKWA
SPEC NO: DSAM8461 REV NO: V.2A DATE: MAR/28/2015 PAGE: 4 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301003059
SPEC NO: DSAM8461 REV NO: V.2A DATE: MAR/28/2015 PAGE: 5 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301003059
PACKING & LABEL SPECIFICATIONS SC10-11SYKWA
Terms and conditions for the usage of this doc ument
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAM8461 REV NO: V.2A DATE: MAR/28/2015 PAGE: 6 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301003059
SPEC NO: DSAM8461 REV NO: V.2A DATE: MAR/28/2015 PAGE: 7 OF 7
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301003059
