BXB150-48S3V3FLTJ - Emerson Network Power - Embedded Power

Embedded Power for

Business-Critical Continuity

BXB150 Series

Single output

Special Features

• Industry standard footprint

MTBF >1.4 million hours

(Bellcore 332)

• Input voltage to ETS300-132-2

• Adjustable output voltage

• No minimum load required

• Separate case ground pin

• 2:1 input range for battery

powered applications

• Undervoltage lockout (UVLO)

• UL, VDE and CSA

safety approvals

• Available RoHS compliant

• 2 year warranty

Total Power: 150 W

Input Voltage: 18 - 36 Vdc

36 - 75 Vdc

# of Outputs: Single

Safety

VDE0805/EN60950/IEC950

UL1950

CSA C22.2 No. 950

Rev.05.13.08

bxb150

1 of 4

Electrical Specifications

Output

Voltage adjustability: 60% to 110%

Setpoint accuracy: ±1.0%

Line regulation Low line to high line ±0.5%

Load regulation Full load to min. load ±0.10%

Minimum load 0 %

Overshoot At turn on and turn-off None

Undershoot None

Ripple and noise

5 Hz - 20 MHz (see note 1)

3.3 V and 5 V 75 mV pk-pk,

20 mV rms

12V and 15 V 100 mV pk-pk,

30 mV rms

Temperature coefficient ±0.01% / ºC

Transient response (see note 2) ±2.0% max. deviation

170 μsrecovery

to within ±1.0%

Remote sense 0.5 Vdc transmission

line drop compensation

Rev.05.13.08

bxb150

2 of 4

Embedded Power for

Business-Critical Continuity

Input

Input voltage range 24 Vin nominal 18 - 36 Vdc

48 Vin nominal 36 - 75 Vdc

Input current No load 130 mA max.

Remote OFF 20 mA max.

Input current (max.)

(See note 4)

24 Vin 9.0 A max. @ lo max.

and Vin = 0 to 75 V

48 Vin 6.5 A max. @ lo max.

and Vin = 0 to 75 V

Input reflected ripple (See note 6) 5 mA pk-pk

Active low remote ON/OFF

Logic compatiblity

OFF

(See note 7)

Open collector ref to -input

1.2 Vdc max.

Open circuit

Undervoltage lockout: 24 Vin: power-up 17 V

24 Vin: power-down 16.3 V

48 Vin: power-up 34 V

48 Vin: power-down 32.5 V

Startup time (see note 8) Power-up 20 ms

Remote ON/OFF 20 ms

Thermal performance Operating case temp. -40 ºC to +100 ºC

Non-operating -55 ºC to +125 ºC

Altitude Operating 10,000 feet max.

Non-operating 40,000 feet max.

Vibration 5 - 500 Hz 2.4 G rms (approx.)

Environmental Specifications

General Specifications

Efficiency See table

Isolation voltage Input/case 1500 Vdc

Input/output 1500 Vdc

Output/case 1500 Vdc

Switching frequency Fixed 500 kHz typ.

Approvals and

standards (see note 5)

VDE0805, EN60950, IEC950

UL1950, CSa c22.2 No. 950

Case material Aluminum baseplate with plastic case

Weight 110 g (3.88 oz)

MTBF Bellcore 332 1,400,000 hours

MIL-HDBK-217F 580,000 hours min.

@ 40 °C, 100% FL

EMC Charateristics

Conducted emissions (see note 3) Bellcore 1089 Level A

FCC part 15 Level A

EN55022, CISPR22 Level A

Protection

Short-circuit Continuous, automatic recovery

Overvoltage Non-latching

Undervoltage Non-latching

Thermal 110 °C baseplate, automataic recovery

Telecom Specifications

Central office

interface A

ETS300-132-2

Rev.05.13.08

bxb150

3 of 4

Embedded Power for

Business-Critical Continuity

Notes

1Measured with 10 μF tantalum capacitor and 1 μF ceramic capacitor across

output.

2di/dt = 0.1 A/1 μs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to 0.75 lo

max. and 0.75 lo max. to 0.5 lo max.

3Units should be characterised within systems. External components required.

4Input fusing is recommended based on surge current and maximum input

current.

5This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

6Simulated source impedance of 12 μH. 12 μH inductor in series with +Vin.

7Active high remote ON/OFF option is available (standard product is active low),

designate with the suffix ‘FHT’ e.g. BXB150-48S05FHTJ. Consult factory for

further details and options.

8Start-up into resistive load.

9The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.

TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special

request, please contact your local sales representative for details.

10 NOTICE: Some models do not support all options. Please contact your local

sales representative or use the on-line model number search tool at

http://www.powerconversion.com to find a suitable alternative.

ALL DIMENSIONS IN INCHES (mm)

Tolerance : x.xx 0.02in. (0.51mm)

x.xxx 0.010in. (0.254mm)

VIEW SHOWN

PIN SIDE UP

1.90

(48.26) 0.190 (4.83) 0.010 (0.25)

2 x Ø.080 (2.03) 0.002 (0.05)

4 x M3 x 0.5 Through

7 x Ø.040 (1.02) 0.002 (0.05)

2.28 (57.91) Max.

0.700 (17.77)

1.000 (25.40)

1.400 (35.56)

2.000 (50.80)

0.190 (4.83) 0.010 (0.25)

0.400 (10.16)

0.500 (12.69) 0.010 (0.25)

0.400 (10.16)

1.000 (25.40)

1.400 (35.56)

Vo(+) +SEN TRIM -SEN Vo (-)

VI(+) ON/OFF CASE VI (-)

0.200 (5.08) Min.

Length for all Input

and Output Pins

0.500 (12.70)

2.40 (60.96)

Max.

External Output Trimming

Output can be externally trimmed

by using the method shown.

TRIM

DOWN

RT1

RT2

Ordering Information

Output

Power

(Max.)

Input

Voltage OVP Output

Voltage

Output

Current

(Min.)

Output

Current

(Max.)

Efficiency

(Typ.)

Regulation

Model Number

Line Load

100 W 18 - 36 Vdc 4.3 Vdc 3.3 V 0 A 30 A 77% ±0.05% ±0.1% BXB150-24S3V3FLTJ

100 W 36 - 75 Vdc 4.3 Vdc 3.3 V 0 A 30 A 79% ±0.05% ±0.1% BXB150-48S3V3FLTJ

150 W 36 - 75 Vdc 6.5 Vdc 5 V 0 A 30 A 84% ±0.05% ±0.1% BXB150-48S05FLTJ

150 W 36 - 75 Vdc 14.5 Vdc 12 V 0 A 12.5 A 84% ±0.05% ±0.1% BXB150-48S12FLTJ

150 W 36 - 75 Vdc 17.5 Vdc 15 V 0 A 10 A 88% ±0.05% ±0.1% BXB150-48S15FLTJ

Pin connections

Pin Number Function

1 +Vin

2Remote ON/OFF

3Case

4 -Vin

5-Vout

6-Sense

7Trim

8+Sense

9+Vout

Mechanical Drawing

Embedded Power for

Business-Critical Continuity

Rev.05.13.08

bxb150

4 of 4

Americas

5810 Van Allen Way

Carlsbad, CA 92008

USA

Telephone: +1 (760) 930 4600

Facsimile: +1 (760) 930 0698

Europe (UK)

Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX

United Kingdom

Telephone: +44 (0) 1384 842 211

Facsimile: +44 (0) 1384 843 355

Asia (HK)

14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon

Hong Kong

Telephone: +852 2176 3333

Facsimile: +852 2176 3888

For global contact, visit:

www.powerconversion.com

techsupport.embeddedpower

@emerson.com

While every precaution has been taken to ensure

accuracy and completeness in this literature, Emerson

Network Power assumes no responsibility, and disclaims

all liability for damages resulting from use of this

information or for any errors or omissions.

Emerson Network Power and the Emerson

Network Power logo are trademarks and

service marks of Emerson Electric Co.

EmersonNetworkPower. com

Embedded Computing

Embedded Power

Monitoring

Outside Plant

Power Switching & Controls

Precision Cooling

Racks & Integrated Cabinets

Services

Surge Protection

Emerson Network Power.

The global leader in enabling

business-critical continuity.

AC Power

Connectivity

DC Power