Features n Non-contacting magnetic technology n RoHS compliant* n Highly resistant to vibration/shock n Highly resistant to fluid/dust ingress n Programmable slope n Robust design for industrial applications n Ideal memory positioning sensor AMM20B Multiturn Magnetic Position Sensor Electrical Characteristics1 (@ 25 C) VDD Supply Voltage...................................................................................................5 V 10 % Supply Current 2 For Low Speed Processing (Code L).................................................................... 12 mA max. For High Speed Processing (Code H).................................................................. 15 mA max. Output Signal (Single)...................................................................................................... Analog Independent Linearity....................................................... 0.5 % (0.3 % available on request) Backlash...................................................................................................................... < 10 typ. Effective Electrical Angle 3 3-10 Turns............................1080 , 1440 , 1800 , 2160 , 2520 , 2880 , 3240 or 3600 11-16 Turns......................................................3960 , 4320 , 4680 , 5040 , 5400 , 5760 Voltage Output (Programmable)................................................................. 1 to 99 % VDD 1 % Output Resolution................................................................................................12 bit @ 3600 Load Resistance Recommended........................................................................ 10K ohms to Overvoltage Protection..................................................................................................+20 VDC Reverse Voltage Protection............................................................................................-10 VDC Environmental Characteristics Operating and Storage Temperature..................................................................-40 to +125 C Humidity....................................................................... MIL-STD-202, Method 103, Condition B Insulation Resistance @ 500 VAC..........................................................................100 MW min. Rotational Life (Shaft Revolutions)............................................................................... 50 million Vibration...............................................................................................................................15 G Shock...................................................................................................................................50 G IP Rating............................................................................................................................... IP50 Product Dimensions 1.570 (0.062) 9.53 0.38 (.375 .015) 20.62 0.78 (.812 .031) Mechanical Angle 3-10 Turns.............................................................................................................. 3960 min. 11-16 Turns............................................................................................................ 6480 min. Shaft/RPM............................................................................................................500 RPM max. Torque Starting & Running.......................................................................2.82 N-cm. (4.0 oz-in.) max. Mounting............................................................................ 170-200 N-cm (15-18 lb.-in.) max. Shaft Material....................................................................................................... Stainless steel Terminal Pins.......................................................................Phos. Bronze, 100 % tin plated (e3) Bearing..................................................................................................................Bronze sleeve Housing and Rear Lid..................................................................................................... UL94V0 Soldering Condition Manual Soldering.................................................. 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire; 370 C (700 F) max. for 3 seconds Wave Soldering............................................... 96.5Sn/3.0Ag/0.5Cu solder with no-clean flux; 260 C (500 F) max. for 5 seconds Wash processes.........................................................................................Not recommended 1At room ambient: +25 C nominal and 50 % relative humidity nominal, except as 2 See "Processing Speed" in How to Order selection guide. 3 Other Effective Electrical Angles available. See How to Order selection guide. 21.55 0.38 (.848 .015) 7.62 0.38 (.300 .015) 0.64 0.25 (.025 .010) 0.250 X 45 CHAMFER (0.010) 5.080 (0.200) 3/8 " 32-UNEF-2A THD ADJUSTMENT SLOT Mechanical Characteristics (@ 25 C) 0.64 0.25 (.025 .010) 6.34 +0.00/-0.07 DIA. (.250 +.000/-.003) 10.29 +0.00/-0.13 DIA. (.405 +.000/-.005) 0.81 0.81 WIDE X DEEP (.032) (.032) + 20.22 (0.80) S1 - AMM20B MEXICO 14.29 (0.56) TOLERANCES EXCEPT WHERE NOTED .127 .50 DECIMALS: .XX .XXX (.005) (.02) DIMENSIONS: MM (INCHES) noted. Resolution No. of Turns 3 4 5 6 7 8 9 EEA 1080 1440 1800 2160 2520 2880 3240 Resolution 1228 1638 2047 2456 2866 3275 3685 No. of Turns 10 11 12 13 14 15 16 EEA 3600 3960 4320 4680 5040 5400 5760 WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov Resolution 4094 2816 3072 3328 3584 3840 4096 *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/ disclaimer.pdf. AMM20B Multiturn Magnetic Position Sensor How To Order A M M 2 0 B 5 A 1 B L A S L 3-10 Turns 11-16 Turns Code Description Code Description 24 1080 (3 Turns) 88 3960 (11 Turns) 32 1440 (4 Turns) 96 4320 (12 Turns) 40 1800 (5 Turns) 02 4680 (13 Turns) 48 2160 (6 Turns) 10 5040 (14 Turns) 56 2520 (7 Turns) 18 5400 (15 Turns) 64 2880 (8 Turns) 26 5760 (16 Turns) 72 3240 (9 Turns) 80 3600 (10 Turns) CONFIGURATION Code Description M Multiturn SIZE Code Description 20 20 mm MOUNTING CONFIGURATION Code Description B Bushing Mount, Stainless Steel Shaft: 13/16 " FMS, 1/4 " Dia. DIRECTION Code Description 1 CCW (Output Increasing) 3 CW (Output Increasing) Bushing Material: Brass TERMINAL CONFIGURATION Code Description L Axial PC Pin Bearing Type: Sleeve SUPPLY VOLTAGE, VCC Rotational Life (Millions of Cycles) Code Description 5 5 VDC Code 3-10 Turns 11-16 Turns Type A1 B1 Analog / Single Output 8 VOLTAGE RATIO 1 % Code Description A 1-99 % of VCC INDEPENDENT LINEARITY EEA (Turns) Code Description 3-16 A 1.0 % 5-16 B 0.5 % 10-16 C 0.3 % 6 4 2 0 SHAFT STYLE Code Description S Slotted NUMBER OF TURNS / OUTPUT TYPE 10 0 50 100 150 8 0 EFFECTIVE ELECTRICAL ANGLE MODEL DESIGNATOR Code Description AM Analog Magnetic 12 3 200 250 PROCESSING SPEED Code Output Refresh Rate H High (400 s Typ.) L Low (660 s Typ.) 300Shaded 350 areas 400 represent 450 most 500 common features. Shaft Side Load (grams) 100 90 80 70 60 50 40 30 20 10 0 OUTPUT 0 500 1000 1500 2000 2500 Mechanical Angle () 3000 3500 CW DIRECTION 4000 Rotational Life vs. Shaft Side Load Rotational Life (Millions of Cycles) Vout (%) Standard Output: 10-Turn CW Increasing (Code 380 Shown) 60 50 40 30 20 10 0 0 50 100 150 200 250 300 350 400 450 500 Shaft Side Load (grams) REV. 03/19 (%) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 100 90 80 70 60 Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, "Bourns"). Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R) product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns(R) product with other components in the user's application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns(R) product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns(R) product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns(R) product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns(R) product to meet the requirements of such industry standard or particular qualification. Users of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns(R) products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns(R) products in such unauthorized applications might not be safe and thus is at the user's sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns(R) standard products that are suitable for use in automotive applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns(R) standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns(R) standard product in the data sheet as compliant with the AEC-Q standard or "automotive grade" does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns(R) standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns(R) standard products that are suitable for use in aircraft or space applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. The use and level of testing applicable to Bourns(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R) custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R) products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns(R) products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R