CAT.8100Z
Radial lead type (Applicable standard JIS C0806-2)
In order to identify correct part number for
the taped product, taping code must be
added.
If the bulk part number is up to 11th digit,
taping code shall be as follows:
In case 12th digit is numeral, it shall be
Taped Leads for Automatic Insertion Systems
Notes:
Conductive polymer aluminum solid electrolytic capacitors
Specifications Capacitor Taping code
diameter
Packaging Lead style Leader FP0(φ) Code Applicable size
Formed lead See Table 1
12.7 3 to 8
TP
φ4 to 8 Case length (5mmL), φ6.3×6
Ammo-pack See Table 2
12.7 4 to 10 TP
φ4 to 6.3
Case
length
(7mmL)
, φ4
Straight lead
TD
See Table 2
15.0 12.5 TO (φ12.5×12.5 to 25)
See Table 2
15.0 16, 18 TN (φ16 ×15 to 25, φ18×15 to 25)
T E
φ4 to 8 Case length (5mmL, 7mmL)
T P (φ3 ×5, φ4 ×11)
T A
(φ5×9 to φ8×9, φ4×11 to φ8×20)
–
+
(mm)
ALUMINUM ELECTROLYTIC CAPACITORS
φ5×9 or more, φ6.3×9
or more
,
φ8×7
or more
, φ10×8 to 25)
Notes:
1 F = 2.0mm is also available, provided
that capacitor case length is less than 9mm.
Taping code to be .
2 Tolerance on F for φ16 and φ18 units
shall be ±0.8mm.
3 Tolerance on Ho for φ3 units shall be
16.0 MIN.
4 Conductive polymer aluminum solid
electrolytic capacitors
Case Size Straight Lead Type Case dia (φ) ×Length (L)
Tolerance φ16
Item φ5φ6.3 φ8 ×5φ8 ×7φ8φ10 φ12.5 φ18
TP TP, TD TP, TD TP TD TD TD TO TN
φdLead-wire diameter ±0.05 0.45 0.45 0.5 0.6 0.6 0.6 0.8
PPitch of component ±1.0 12.7 12.7 12.7 12.7 12.7 12.7 12.7 15.0 30.0
P0Feed hole pitch ±0.2 12.7 12.7 12.7 12.7 12.7 12.7 12.7 15.0 15.0
P1Hole center to lead ±0.5 5.1 5.1 4.6 4.6 3.85 5.0 3.75
P2±1.0 6.35 6.35 6.35 6.35 6.35 6.35 6.35 7.5 7.5
F 2.5 12.5 12.5 2.5 3.5 3.5 5.0 5.0 7.5 2
H 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5
WTape Width ±0.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0
W0MIN 7.0 7.0 7.0 7.0 7.0 7.0 7.0 12.5 12.5
φ
D
0
Feed hole diameter
±0.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
tTotal tape thickness ±0.2 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
+0.8
–0.2
+0.75
–0.5
0.45
0.5, 0.6 0.45
0.5, 0.6
Feed hole center
to component center
Lead-to-lead
distance
Height of component
from tape center
Hold down tape
width
5.1
( 1 5.35)
5.1
( 1 5.35)
Formed Lead Type Case dia (φ) ×Length (L)
Tolerance φ3 ×5φ4 ×11
Item
TP TP TE TA TA
φdLead-wire diameter ±0.05 0.40 0.45 0.45 (φ8× 7 : 0.5) 0.5 (φ4× 11 : 0.45) 0.6
PPitch of component ±1.0 12.7 12.7 12.7 12.7 12.7
P0Feed hole pitch ±0.2 12.7 12.7 12.7 12.7 12.7
P1Hole center to lead ±0.5 5.1 5.1 3.85 3.85 3.85
P2±1.0 6.35 6.35 6.35 6.35 6.35
F 2.5 2.5 5.0 5.0 5.0
KClinch height MAX 1.5 2.5 1.5 2.5 4.0
H 18.5 18.5 17.5 18.5 20.0
H0±0.5 16.0 316.0 16.0 16.0 16.0
WTape Width ±0.5 18.0 18.0 18.0 18.0 18.0
W0MIN 7.0 7.0 7.0 7.0 7.0
φ
D
0
Feed hole diameter
±0.2 4.0 4.0 4.0 4.0 4.0
tTotal tape thickness ±0.2 0.6 0.6 0.6 0.6 0.6
Feed hole center
to component center
Lead-to-lead
distance
Height of component
from tape center
Lead-wire clinch
height
Hold down tape
width
+0.8
–0.2
+0.75
–0.5