V o l t a g e P r o t e c t i o n D e v i c e s October 2015 Chip Protectors For ESD protection SGNE series SGNE04 SGNE06 0402 [01005 inch]* 0603 [0201 inch] * Dimensions Code JIS[EIA] (2/10) Voltage Protection Devices REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS Please note the following precautions in order to avoid problems with chip protectors such as characteristic degradation and element destruction. Please store these products in an environment with a temperature of 5 to 40C and humidity level of 20 to 70%RH, and use them within six months. Poor storage conditions may lead to the deterioration of the solderability of the terminal electrodes, so please be careful to avoid contact with humidity, dew condensation, dust, toxic gas (hydrogen, hydrogen sulfide, sulfurous acid, chlorine, ammonia, etc.), direct sunlight, and so on. Please do not use products that have been dropped or detached when mounting. Please solder with the reflow soldering method, and not the flow (dip) soldering method. Please note the following precautions to avoid problems with chip protectors such as characteristic degradation and element destruction, which ultimately lead to the generation of heat and smoke with the elements. Do not use in locations where the temperatures exceed the operating temperature range such as under direct sunlight or near sources of heat. Do not use in locations where there are high levels of humidity such as under direct exposure to weather and areas where steam is released. Do not use in locations such as dusty areas, high-saline environments, places where the atmosphere is contaminated with corrosive gas, etc. Avoid powerful vibrations, impact (such as by dropping), pressure, etc. that may lead to splitting in the products. Do not use with a voltage that exceeds the maximum allowable circuit voltage. When resin coating (including modular) a varistor, do not use a resin that will cause deterioration of the varistor. Be sure never to use resin that generates hydrogen as palladium is used for the inner electrode. Avoid attachment near combustible materials. Please contact our sales offices when considering the use of the products listed on this catalog for applications, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property ('specific uses' such as automobiles, airplanes, medical instruments, nuclear devices, etc.) as well as when considering the use for applications that exceed the range and conditions of this catalog. Please also contact us when using these products for automotive applications. Please note that we are not responsible for any damages or losses incurred resulting from the use of these products that exceeds the range and conditions of this catalog or specific uses. Please take appropriate measures such as acquiring protective circuits and devices that meet the uses, applications, and conditions of the instruments and keeping backup circuits. 20151023 / vpd_protectors_sgne_en.fm (3/10) Voltage Protection Devices Chip Protectors Product compatible with RoHS directive Compatible with lead-free solders ESD Protection Overview of the SGNE Series FEATURES Multilayer chip protector is the ESD protection solution which is using a semiconductor ceramic. It is the possible replacement of TVS Diode for ESD protectrion. Chip size is available with EIA01005(0402mm), EIA0201(0603mm). Rather than the present products of TDK, it has the outstanding ESD absorption feature. Excellent ESD protection characteristic. (Based on IEC61000-4-2, Contact-8kV) APPLICATION ESD protection such as signal line, audio line Filter for EMI protection Smart phone, tablet PC, portable music player, note PC, etc PART NUMBER CONSTRUCTION SGNE Series name 04 LxW Dimensions (mm) 04 0.4x0.2 06 0.6x0.3 C Structure 080 Breakdown voltage (V) 080 8 270 27 M T 150 Varistor voltage Capacitance Packaging style tolerance (pF) (%) M 20 T Taping 150 15 6R8 6.8 N 25 Capacitance tolerance (%) N 30 G 2pF ESD Clamp voltage Average voltage (IEC61000-4-2, 8kV) RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ * All specifications are subject to change without notice. 20151023 / vpd_protectors_sgne_en.fm (4/10) Voltage Protection Devices Overview of the SGNE Series TDK ESD Protection Device Map Multilayer chip protector is a ESD protection component which has excellent ESD absorption characteristic and the low capacitance. This SGNE series is suitable for the applications which require the low clamping voltage and the low capacitance. Average 30 to 100ns 300 NEW! ESD Clamping Voltage at 8kV-ESD 200 ML Varistor AVR "L" series Low Capacitance 100 80 70 60 ML Chip Protectors 50 40 ML Varistor AVR "M" series 30 TVS Diode's area 20 10 0.6 0.8 1 2 3 4 5 6 78 10 High ESD absorption capability 20 30 40 50 6070 100 Capacitance (pF) 200 300 400 600 1000 2000 3000 * All specifications are subject to change without notice. 20151023 / vpd_protectors_sgne_en.fm (5/10) Voltage Protection Devices Overview of the SGNE Series RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T: Temperature T4 T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 T2 150C 180C Time t1 120s max. Soldering Temp. Time T3 t2 230C 40s max. Peak Temp. T4 260C max. Time t3 5s * All specifications are subject to change without notice. 20151023 / vpd_protectors_sgne_en.fm (6/10) Voltage Protection Devices SGNE series SGNE04/SGNE06 Types SHAPE & DIMENSIONS W L B T EIA 01005 0201 W 0.20.02 0.30.03 T 0.20.02 0.30.03 Dimensions in mm B 0.07min. 0.1min. CIRCUITS DIAGRAM c RECOMMENDED LAND PATTERN L 0.40.02 0.60.03 b EIA 01005 0201 a a 0.20 0.25 to 0.35 b Dimensions in mm b c 0.15 to 0.20 0.18 to 0.20 0.20 to 0.30 0.25 to 0.35 * All specifications are subject to change without notice. 20151023 / vpd_protectors_sgne_en.fm (7/10) Voltage Protection Devices SGNE series SGNE04/SGNE06 Types ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Part No. Maximum continuous voltage Vdc(V) Breakdown voltage V(V) [1mA] Capacitance Leakage current C(pF) [1MHz] Vdc(A) max. EIA01005(0402mm) SGNE04C080MT150N25 EIA0201(0603mm) SGNE06C080MT150N25 SGNE06C270MT6R8G60 max. ESD Clamp voltage Average Voltage (V) [IEC61000-4-2, 8kV] max. 4.3 8 ( 6.4 to 9.6) 15 (10.5 to 19.5) 20 25 4.3 15 8 27 ( 6.4 to 9.6) (21.6 to 32.4) 15 6.8 (10.5 to 19.5) ( 4.8 to 8.8) 20 20 25 60 Short bar residual inductance =0nH * All specifications are subject to change without notice. 20151023 / vpd_protectors_sgne_en.fm (8/10) Voltage Protection Devices SGNE series SGNE04/SGNE06 Types ELECTRICAL CHARACTERISTICS SGNE 0603mm Case Size IMPEDANCE vs. FREQUENCY CHARACTERISTICS 10000 CAPACITANCE vs. FREQUENCY CHARACTERISTICS 1000 6.8pF 100 Capacitance(pF) Impeadance() 1000 15pF 10 100 15pF 10 6.8pF 1 0.1 1 10 100 Frequency(MHz) 1000 1 10000 1 10 100 Frequency(MHz) 1000 10000 Short bar residual inductance =0nH SGNE 15pF Type IMPEDANCE vs. FREQUENCY CHARACTERISTICS 10000 CAPACITANCE vs. FREQUENCY CHARACTERISTICS 1000 Capacitance(pF) Impeadance() 1000 100 10 100 10 1 0.1 1 10 100 Frequency(MHz) 1000 10000 1 1 10 100 Frequency(MHz) 1000 10000 Short bar residual inductance =0nH * All specifications are subject to change without notice. 20151023 / vpd_protectors_sgne_en.fm (9/10) Voltage Protection Devices SGNE series SGNE04/SGNE06 Types ESD CLAMP CHARACTERISTICS 1600 Vpeak (Voltage) Without Varistor 1200 Vave Based on IEC61000-4-2 150pF, 330, Contact, 8kV Voltage (V) 800 30 100 400 0 -400 -100 Without ESD Device SGNE06C080MT150N25 SGNE06C270MT6R8G60 SGNE04C080MT150N25 15pF Type 0 100 200 Time (nano-seconds) 300 400 SGNE06C270MT6R8G60 120 120 100 100 80 60 40 80 60 40 20 20 0 0 -20 -100 0 100 200 Time (nano-seconds) 300 Vpeak=59V, Vave=22V 140 Voltage (V) Voltage (V) SGNE06C080MT150N25 Vpeak=99V, Vave=51V 140 ESD Clamping Voltage(V, at 8kV) Vpeak Vave 1561 395 59 22 99 51 56 21 Part No. 6.8pF Type (ns) -20 -100 400 0 100 200 Time (nano-seconds) 300 400 SGNE04C080MT150N25 Vpeak=56V, Vave=21V 140 120 Voltage (V) 100 80 60 40 20 0 -20 -100 0 100 200 Time (nano-seconds) 300 400 * All specifications are subject to change without notice. 20151023 / vpd_protectors_sgne_en.fm (10/10) Voltage Protection Devices SGNE series Packaging Style REEL DIMENSIONS o60min. 2.00.5 1.0 8.4 +2.0 -0.0 o130.2 o210.8 14.4max. o1802.0 Dimensions in mm 4.00.1 B A 8.00.3 2.00.05 3.50.05 1.5 +0.1 0 1.750.1 TAPE DIMENSIONS P1 K Dimensions in mm Type SGNE0402 SGNE0603 160min. A 0.260.04 0.380.05 B 0.460.04 0.680.05 Taping 200min. Drawing direction P1 2.00.05 2.00.05 300min. K 0.4max. 0.45max. Dimensions in mm * All specifications are subject to change without notice. 20151023 / vpd_protectors_sgne_en.fm