RFSA4013 RFSA4013 Temperature Compensating Attenuator TEMPERATURE COMPENSATING ATTENUATOR Features +85dBm IIP2 Typical GND VDD GND GND 2 11 NC RFIN 3 10 RFOUT 9 NC ATTEN 4 High 1dB Compression Point >+30dBm Low Supply Current 1mA Typical 5V Power Supply Class 1C ESD (1000V) 12 NC NC 1 5 6 7 8 GND 3 Selectable Attenuation versus Temperature Slopes +55dBm IIP3 Typical 13 CONTROL BLOCK Broadband 50MHz to 6000MHz Frequency Range 14 MODE2 15 MODE1 Patent Pending Circuit Architecture 16 GND GND GND Package: QFN, 16-Pin, 0.9mm x 3mm x 3mm Functional Block Diagram Complete Solution in a Small 3mm x 3mm QFN Package 3.3V Part Available - RFSA4023 Applications Cellular, 3G Infrastructure WiBro, WiMax, LTE Microwave Radio High-Linearity Level Control Product Description RFMD's RFSA4013 is a fully monolithic analog temperature compensating attenuator (TCA) featuring exceptional linearity over its entire gain control range. It is designed to offset the gain reduction of an RF component over temperature without the need for closed loop feedback. Three customer selectable temperature coefficients make it a flexible solution for RF lineups. It incorporates revolutionary new circuit architecture to solve a long standing industry problem with regards to attenuator architecture: high IP3, low DC current and broad bandwidth. Traditional approaches for solving this problem require expensive co-fired ceramics with temperature sensitive materials or current hungry PIN diodes with elaborate area consuming control circuits. This temperature compensating attenuator requires only a single supply voltage and two logic bits to set control attenuation slope versus temperature. The RFSA4013 draws a very low 1mA current and is packaged in a small 3mm x 3mm QFN. This attenuator is matched to 50 over its rated control range and frequency with no external matching components required. Ordering Information RFSA4013SQ RFSA4013SR RFSA4013TR7 RFSA4013PCK-410 Sample bag with 25 pieces 7" Sample reel with 100 pieces 7" Reel with 2500 pieces 50MHz to 6000MHz PCBA with 5-piece sample bag Optimum Technology Matching(R) Applied GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS GaN HEMT BiFET HBT Si BJT RF MICRO DEVICES(R), RFMD(R), Optimum Technology Matching(R), Enabling Wireless ConnectivityTM, PowerStar(R), POLARISTM TOTAL RADIOTM and UltimateBlueTM are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. (c)2012, RF Micro Devices, Inc. DS111221 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. 1 of 16 RFSA4013 Absolute Maximum Ratings Parameter Rating Unit Supply Voltage (VDD) -0.5 to +6.0 V Mode Pin Voltage (MODE 1) -0.5 to +6.0 V Mode Pin Voltage (MODE 2) -0.5 to +6.0 V +30 dBm Operating Temperature -40 to +85 C Storage Temperature RF Input Power -65 to +150 C Maximum Junction Temperature +125 C ESD - Human Body Model (HBM) 1000 V Parameter Min. Specification Typ. Max. 4.75 5 5.25 Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Unit Condition General Supply Voltage (VDD) Supply Current 1 Operating Temperature -40 Thermal Resistance 85 45 RF Input Power V mA C C/W 27 dBm 6000 MHz RF Performance Frequency Range 50 Attenuation Slope Mode1 = Low Mode2 = High 0.043 dB/C -40C to 80C Attenuation Slope Mode1 = High Mode2 = High 0.058 dB/C -40C to 80C Attenuation Slope Mode1 = High Mode2 = Low 0.066 dB/C -40C to 80C Nominal +25C Attenuation Mode1 = Low Mode2 = High 5.4 dB Nominal +25C Attenuation Mode1 = High Mode2 = High 6.35 dB Nominal +25C Attenuation Mode1 = High Mode2 = Low 7.4 dB 3 Deg Relative Phase Insertion Phase at +25C temperature relative to max temperature Return Loss 20 dB Input 1dB Compression Point 30 dBm 55 dBm PIN + (IM3dBC/2) Input IP3 45 Input IP2 85 dBm PIN + IM2dBC, IM2 is F1 + F2 Input IH2 87 dBm PIN + H2dBC, H2 is Second Harmonic Input IH3 59 dBm PIN + (H3dBC/2), H3 is Third Harmonic Power Supply MODE pin Logic Low MODE pin Logic High +0.4 1 V V NOTE: Typical performance at nominal conditions unless otherwise noted: Supply voltage = 5.0V, Operating temperature = 25C, RF frequency 2GHz 2 of 16 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. DS111221 RFSA4013 Measured Performance Insertion Loss versus Temperature Insertion Loss versus Frequency Mode 1=High, Mode 2=Low, VDD=5V 0 0 -2 -2 -4 -4 -6 -6 Insertion Loss (dB) Insertion Loss (dB) RF 2GHz, VDD=5V -8 -10 -12 -14 Mode1=High Mode2=Low -16 -8 -10 -12 -14 -16 Mode1=High Mode2=High -18 -18 Mode1=Low Mode2=High -20 -60 -40 -20 0 20 40 60 0 1 2 3 4 5 6 Insertion Loss versus Frequency Mode 1=High, Mode 2=High, VDD=5V Mode 1=Low, Mode 2=High, VDD=5V 0 0 -2 -2 -4 -4 -6 -6 Insertion Loss (dB) Insertion Loss (dB) 60C Frequency (GHz) Insertion Loss versus Frequency -8 -10 -12 -14 -18 0C 40C 80C Temperature (C) -16 -20C 20C -20 100 80 -40C -40C -20C 0C 20C 40C 60C -8 -10 -12 -14 -16 -18 80C -20 -40C -20C 0C 20C 40C 60C 80C -20 0 1 2 3 4 5 0 6 1 2 Frequency (GHz) 3 4 5 6 Frequency (GHz) Input Return Loss versus Temperature Input Return Loss versus Frequency RF 2GHz, VDD=5V Mode 1=High, Mode 2=Low, VDD=5V 0 0 -5 -5 Mode1=High Mode2=Low Mode1=High Mode2=High -10 -10 Input Return Loss (dB) Input Return Loss (dB) Mode1=Low Mode2=High -15 -20 -25 -30 -35 -40 -15 -20 -25 -30 -35 -40 -45 -45 -50 -40C -20C 0C 20C 40C 60C 80C -50 -60 -40 -20 0 20 40 Temperature (C) DS111221 60 80 100 0 1 2 3 4 5 6 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. 3 of 16 RFSA4013 Measured Performance Input Return Loss versus Frequency Input Return Loss versus Frequency Mode 1=High, Mode 2=High, VDD=5V Mode 1=Low, Mode 2=High, VDD=5V 0 -5 -5 -10 -10 Input Return Loss (dB) Input Return Loss (dB) 0 -15 -20 -25 -30 -35 -40 -45 -40C -20C 0C 20C 40C 60C -15 -20 -25 -30 -35 -40 -45 80C -50 -20C 0C 20C 40C 60C 80C -50 0 1 2 3 4 5 0 6 1 2 Frequency (GHz) 3 4 6 Output Return Loss versus Frequency RF 2GHz, VDD=5V Mode 1=High, Mode 2=Low, VDD=5V 0 0 -5 -10 Output Return Loss (dB) -5 -10 -15 -20 -25 -30 -35 Mode1=High Mode2=Low -40 -15 -20 -25 -30 -35 -40 Mode1=High Mode2=High -45 -45 Mode1=Low Mode2=High -50 -40C -20C 0C 20C 40C 60C 80C -50 -60 -40 -20 0 20 40 60 80 100 0 1 2 Temperature (C) -5 -5 -10 -10 Output Return Loss (dB) 0 -15 -20 -25 -30 -35 -40C -20C 0C 20C 40C 60C 6 -15 -20 -25 -30 -35 -40 -45 80C -50 -40C -20C 0C 20C 40C 60C 80C -50 0 1 2 3 Frequency (GHz) 4 of 16 5 Mode 1=Low, Mode 2=High, VDD=5V 0 -45 4 Output Return Loss versus Frequency Mode 1=High, Mode 2=High, VDD=5V -40 3 Frequency (GHz) Output Return Loss versus Frequency Output Return Loss (dB) 5 Frequency (GHz) Output Return Loss versus Temperature Output Return Loss (dB) -40C 4 5 6 0 1 2 3 4 5 6 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. DS111221 RFSA4013 Measured Performance Input IP3 versus Temperature Input IP3 versus Attenuation RF 2GHz, VDD=5V, Pin=+20dBm/Tone 70 70 60 60 50 50 Input IP3 (dBm) Input IP3 (dBm) RF 2GHz, VDD=5V, Pin=+20dBm/Tone 40 30 40 30 20 20 Mode1=High Mode2=Low Mode1=High Mode2=Low Mode1=High Mode2=High 10 Mode1=High Mode2=High 10 Mode1=Low Mode2=High Mode1=Low Mode2=High 0 0 -60 -40 -20 0 20 40 60 80 -14 100 -12 -10 -8 -4 -2 Input IP3 versus Temperature Input IP3 versus Temperature VDD=5V, Mode 1=High, Mode 2=Low, Pin=+20dBm/Tone VDD=5V, Mode 1=High, Mode 2=High, Pin=+20dBm/Tone 70 70 60 60 50 50 Input IP3 (dBm) Input IP3 (dBm) -6 0 Attenuation (dB) Temperature (C) 40 30 40 30 20 20 10 50MHz 500MHz 1000MHz 2000MHz 3000MHz 4000MHz 10 50MHz 500MHz 1000MHz 2000MHz 3000MHz 4000MHz 0 0 -60 -40 -20 0 20 40 60 80 100 -60 -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) Input IP3 versus Temperature VDD=5V, Mode 1=Low, Mode 2=High, Pin=+20dBm/Tone 70 60 Input IP3 (dBm) 50 40 30 20 10 50MHz 500MHz 1000MHz 2000MHz 3000MHz 4000MHz 0 -60 -40 -20 0 20 40 60 80 100 Temperature (C) DS111221 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. 5 of 16 RFSA4013 Measured Performance Input IP2 versus Temperature Input IP2 versus Attenuation RF 2GHz, VDD=5V, Pin=+20dBm/Tone 120 120 110 110 100 100 90 90 80 80 Input IP2 (dBm) Input IP2 (dBm) RF 2GHz, VDD=5V, Pin=+20dBm/Tone 70 60 50 40 70 60 50 40 30 30 Mode1=High Mode2=Low 20 10 Mode1=High Mode2=Low 20 Mode1=High Mode2=High Mode1=High Mode2=High 10 Mode1=Low Mode2=High Mode1=Low Mode2=High 0 0 -60 -40 -20 0 20 40 60 80 -14 100 -12 -10 -8 -4 -2 0 Attenuation (dB) Temperature (C) Input IP2 versus Temperature Input IP2 versus Temperature Vdd=5V, Mode 1=High, Mode 2=Low, Pin=+20dBm/Tone VDD=5V, Mode 1=High, Mode 2=High, Pin=+20dBm/Tone 120 120 110 110 100 100 90 90 80 80 Input IP2 (dBm) Input IP2 (dBm) -6 70 60 50 40 70 60 50 40 30 50MHz 500MHz 30 50MHz 500MHz 20 1000MHz 2000MHz 20 1000MHz 2000MHz 3000MHz 4000MHz 10 3000MHz 4000MHz 10 0 0 -60 -40 -20 0 20 40 60 80 100 Temperature (C) -60 -40 -20 0 20 40 60 80 100 Temperature (C) Input IP2 versus Temperature VDD=5V, Mode 1=Low, Mode 2=High, Pin=+20dBm/Tone 120 110 100 Input IP2 (dBm) 90 80 70 60 50 40 30 50MHz 500MHz 20 1000MHz 2000MHz 10 3000MHz 4000MHz 0 -60 -40 -20 0 20 40 60 80 100 Temperature (C) 6 of 16 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. DS111221 RFSA4013 Measured Performance 3rd Harmonic IH3 versus Temperature 3rd Harmonic IH3 versus Attenuation RF 2GHz, VDD=5V, Pin=+20dBm 80 80 70 70 60 60 50 50 IH3 (dBm) IH3 (dBm) RF 2GHz, VDD=5V, Pin=+20dBm 40 30 40 30 Mode1=High Mode2=Low 20 Mode1=High Mode2=Low 20 Mode1=High Mode2=High Mode1=High Mode2=High Mode1=Low Mode2=High 10 Mode1=Low Mode2=High 10 0 0 -60 -40 -20 0 20 40 60 80 100 -14 -12 -10 -8 Temperature (C) 3rd Harmonic IH3 versus Temperature -4 -2 0 3rd Harmonic IH3 versus Temperature VDD=5V, Mode 1=High, Mode 2=Low, Pin=+20dBm VDD=5V, Mode 1=High, Mode 2=High, Pin=+20dBm 80 80 70 70 60 60 50 50 IH3 (dBm) IH3 (dBm) -6 Attenuation (dB) 40 40 30 30 20 50MHz 500MHz 1000MHz 2000MHz 20 10 10 3000MHz 50MHz 500MHz 1000MHz 2000MHz 3000MHz 4000MHz 4000MHz 0 0 -60 -40 -20 0 20 40 60 80 100 -60 -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) 3rd Harmonic IH3 versus Temperature VDD=5V, Mode 1=Low, Mode 2=High, Pin=+20dBm 80 70 60 IH3 (dBm) 50 40 30 20 10 50MHz 500MHz 1000MHz 2000MHz 3000MHz 4000MHz 0 -60 -40 -20 0 20 40 60 80 100 Temperature (C) DS111221 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. 7 of 16 RFSA4013 Measured Performance 2nd Harmonic IH2 versus Temperature 2nd Harmonic IH2 versus Attenuation RF 2GHz, VDD=5V, Pin=+20dBm 120 120 110 110 100 100 90 90 80 80 IH2 (dBm) IH2 (dBm) RF 2GHz, VDD=5V, Pin=+20dBm 70 60 50 40 70 60 50 40 30 30 Mode1=High Mode2=Low 20 Mode1=High Mode2=Low 20 Mode1=High Mode2=High 10 Mode1=High Mode2=High 10 Mode1=Low Mode2=High 0 Mode1=Low Mode2=High 0 -60 -40 -20 0 20 40 60 80 100 -14 -12 -10 -8 Temperature (C) 2nd Harmonic IH2 versus Temperature -4 0 -2 2nd Harmonic IH2 versus Temperature VDD=5V, Mode 1=High, Mode 2=Low, Pin=+20dBm VDD=5V, Mode 1=High, Mode 2=High, Pin=+20dBm 120 120 110 110 100 100 90 90 80 80 IH2 (dBm) IH2 (dBm) -6 Attenuation (dB) 70 60 50 40 70 60 50 40 30 50MHz 500MHz 30 50MHz 500MHz 20 1000MHz 2000MHz 20 1000MHz 2000MHz 10 3000MHz 4000MHz 10 3000MHz 4000MHz 0 0 -60 -40 -20 0 20 40 60 80 100 Temperature (C) -60 -40 -20 0 20 40 60 80 100 Temperature (C) 2nd Harmonic IH2 versus Temperature VDD=5V, Mode 1=Low, Mode 2=High, Pin=+20dBm 120 110 100 90 IH2 (dBm) 80 70 60 50 40 30 20 10 50MHz 500MHz 1000MHz 2000MHz 3000MHz 4000MHz 0 -60 -40 -20 0 20 40 60 80 100 Temperature (C) 8 of 16 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. DS111221 RFSA4013 Measured Performance Relative Insertion Phase versus Attenuation Relative Insertion Phase versus Attenuation VDD=5V, Mode 1=High, Mode 2=High 20 20 15 15 Relative Insertion Phase (Deg) Relative Insertion Phase (Deg) VDD=5V, Mode 1=High, Mode 2=Low 10 5 0 -5 1GHz -10 2GHz 3GHz -15 10 5 0 -5 1GHz -10 2GHz 3GHz -15 4GHz 4GHz -20 -20 -16 -14 -12 -10 -8 -6 -4 -2 0 -16 -14 -12 -10 Attenuation (dB) Relative Insertion Phase versus Attenuation -4 -2 0 VDD=5V, Mode 1=High, Mode 2=Low 20 20 15 15 Relative Insertion Phase (Deg) Relative Insertion Phase (Deg) -6 Relative Insertion Phase versus Temperature VDD=5V, Mode 1=Low, Mode 2=High 10 5 0 -5 1GHz -10 2GHz 3GHz -15 10 5 0 -5 1GHz -10 2GHz 3GHz -15 4GHz 4GHz -20 -20 -16 -14 -12 -10 -8 -6 -4 -2 0 -60 -40 -20 0 Attenuation (dB) 20 40 60 80 100 Temperature (C) Relative Insertion Phase versus Temperature Relative Insertion Phase versus Temperature VDD=5V, Mode 1=High, Mode 2=High VDD=5V, Mode 1=Low, Mode 2=High 20 20 15 15 Relative Insertion Phase (Deg) Relative Insertion Phase (Deg) -8 Attenuation (dB) 10 5 0 -5 1GHz -10 2GHz 5 0 -5 1GHz -10 2GHz 3GHz 3GHz -15 10 -15 4GHz 4GHz -20 -20 -60 -40 -20 0 20 40 Temperature (C) DS111221 60 80 100 -60 -40 -20 0 20 40 60 80 100 Temperature (C) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. 9 of 16 RFSA4013 Input IP3 versus Temperature Input IP3 versus Attenuation VDD=5V, 2 Tones at 6GHz and 6.001GHz, Pin=+10dBm/Tone VDD=5V, 2 Tones at 6GHz and 6.001GHz, Pin=+10dBm/Tone 65 65 60 60 55 55 Input IP3 (dBm) Input IP3 (dBm) Measured at 6GHz Performance 50 45 50 45 Mode1=High Mode2=Low Mode1=High Mode2=Low Mode1=High Mode2=High 40 Mode1=High Mode2=High 40 Mode1=Low Mode2=High Mode1=Low Mode2=High 35 -60 -40 100 -20 0 20 40 Temperature (C) 60 80 35 100 -14 -12 -11 -10 Attenuation (dB) -9 Input IP2 versus Temperature Input IP2 versus Attenuation VDD=5V, F=12.001GHz, Pin=+10dBm/Tone VDD=5V, F=12.001Hz, Pin=+10dBm/Tone -8 -7 -6 100 95 95 90 90 85 85 80 Input IP2 (dBm) Input IP2 (dBm) -13 75 70 65 80 75 70 65 Mode1=High Mode2=Low 60 Mode1=High Mode 2=High Mode1=Low Mode2=High 55 50 -60 10 of 16 -40 -20 0 20 40 Temperature (C) 60 80 Mode1=High Mode2=Low 60 Mode1=High Mode2=High 55 100 Mode1=Low Mode2=High 50 -14 -13 -12 -11 -10 Attenuation (dB) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. -9 -8 -7 -6 DS111221 RFSA4013 Measured at 6GHz Performance 2nd Harmonic IH2 versus Temperature 100 VDD=5V, F=6GHz, Pin=+10dBm/Tone 100 95 95 90 90 85 85 80 80 IH2 (dBm) IH2 (dBm) 2nd Harmonic IH2 versus Attenuation VDD=5V, F=6GHz, Pin=+10dBm/Tone 75 70 65 75 70 65 Mode1=High Mode2=Low 60 Mode1=High Mode2=High Mode1=Low Mode2=High 55 50 -60 -40 -20 0 20 40 Temperature (C) 60 80 Mode1=High Mode2=Low 60 Mode1=High Mode2=High 55 Mode1=Low Mode2=High 50 100 -14 -13 3rd Harmonic IH3 versus Temperature -11 -10 Attenuation (dB) -9 -8 -7 -6 3rd Harmonic IH3 versus Attenuation VDD=5V, F=6GHz, Pin=+10dBm/Tone 75 -12 VDD=5V, F=6GHz, Pin=+10dBm/tone 75 Mode1=High Mode2=Low 70 70 Mode1=High Mode2=High 65 65 Mode1=Low Mode2=High 60 IH3 (dBm) IH3 (dBm) 60 55 55 50 50 45 Mode1=High Mode2=Low 45 Mode1=High Mode2=High 40 40 35 -60 -40 -20 0 20 40 Temperature (C) 60 80 100 Mode1=Low Mode2=High 35 -14 -13 -12 -11 -10 Attenuation (dB) -9 -8 -7 -6 Supply Current versus Temperature TCA 5V Mode, VDD=5V, F=6GHz 1.6 1.4 Supply Current (mA) 1.2 1.0 0.8 0.6 Mode1=High Mode2=Low 0.4 Mode1=High Mode2=High 0.2 Mode1=Low Mode2=High 0.0 -60 DS111221 -40 -20 0 20 40 Temperature (C) 60 80 100 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. 11 of 16 RFSA4013 Pin Names and Description Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 GND Name GND NC RFIN NC GND MODE1 MODE2 GND NC RFOUT NC GND GND GND VDD GND GND Description Ground Pin No Connection. Do not Connect to PC Board Ground Plane. RF Input. Use External DC Block. No Connection. Do not Connect to PC Board Ground Plane. Ground Pin Logic Input for Slope Selection. See Table for Options. Logic Input for Slope Selection. See Table for Options. Ground Pin No Connection. Do not Connect to PC Board Ground Plane. RF Output. Use External DC Block. No Connection. Do not Connect to PC Board Ground Plane. Ground Pin Ground Pin Ground Pin Supply Voltage (5V) Ground Pin Exposed Package Ground Paddle is RF and DC Ground Mode Selection Table 12 of 16 Mode1 Mode2 Slope dB/C 25C Atten (dB) LOW HIGH HIGH HIGH HIGH LOW 0.043 0.058 0.066 5.4 6.35 7.4 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. DS111221 RFSA4013 VDD Evaluation Board Schematic C4 1F C9 1000pF R5 100 13 14 15 16 1 12 2 11 RFSA4013 RFIN 3 C1 1000pF 4 9 C2 1000pF 8 7 6 5 C8 1000pF C7 1000pF MODE2 MODE1 DS111221 RFOUT 10 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. 13 of 16 RFSA4013 Evaluation Board Assembly Drawing Evaluation Board Build of Materials (BOM) Description Reference Designator Manufacturer Manufacturer's P/N U1 RFMD RFSA4013 CONN, SMA, END LNCH, MINI, FLT, 0.068" J1-J2 Emerson Network Power 142-0741-851 CONN, HDR, ST, 4-PIN, 0.100", T/H P1-P2 MOLEX 22-28-4043 DDI SA2013-410(A) C1, C2, C7-C9 Murata Electronics GRM155R71H102KA01D CAP, 1F, 10%, 16V, X7R, 1206 C4 Murata Electronics GRM31MR71E105KC01L RES, 100, 5%, 1/16W, 0402 R5 Kamaya, Inc RMC1/16S-101JTH DNP C3, C5-C6 N/A N/A DNP R1-R4 N/A N/A Temperature Compensating Attenuator TCA, 5V PCB, SA2013-410 CAP, 1000pF, 10%, 25V, X7R, 0402 14 of 16 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. DS111221 RFSA4013 Package Drawing (0.9mm x 3mm x 3mm) 3.0000.100 0.400.050 1.7000.100 0.500 BSC 3.0000.100 1.7000.100 0.250 +0.050 / -0.070 0.850.050 0.203 Ref Branding Diagram (0.9mm x 3mm x 3mm) 5# 6TCEG%QFG 3LQ,QGLFDWRU 7UDFH&RGHWREHDVVLJQHGE\6XE&RQ DS111221 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. 15 of 16 RFSA4013 PCB Patterns 16 of 16 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. DS111221