OPI7002RCE - Optek Technologies, Inc.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue A.1 03/07

Page 1 of 3

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Optically Coupled Isolator

OPI7002, OPI7002RCE, OPI7010, OPI710RCE

OPI7320, OPI7320RCE, OPI7340, OPI7340RCE

Features:

• ± 6 kV electrical isolation

• Inexpensive plastic housing

• Choice of phototransistor or photodarlington output

• UL registered File No. E8730*

Description:

Each OPI7002 and OPI7010 consists of an infrared emitting diode coupled to a NPN silicon phototransistor. The

LED and sensor are encased in a black, low-cost plastic housing. Pin spacing is compatible with standard dual-in-

line packages.

Each OPI7320 and OPI7340 consists of an infrared emitting diode coupled to a NPN silicon photodarlington. The

LED and sensor are encased in a high dielectric plastic housing. Pin spacing is compatible with standard dual-in-

line packages.

The RCE versions reverses the Phototransistor Emitter and Collector pin-out.

Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for

more information.

Product Photo Here

Applications:

• Requiring high voltage isolation

between input and output

• Electrical isolation in dirty environments

• Industrial equipment

• Medical equipment

• Office equipment

OPI7002, OPI7010

2 3

1 4

2 3

1 4

OPI7320, OPI7340

Part

Number

LED

Peak

Wavelength

Sensor

Isolation

Voltage

(,000)

CTR

Min IF (mA)

Typ / Max

VCE

(Volts)

Max

Lead

Length /

Spacing

OPI7002 890 nm Transistor 6 20 10 / 50 30 0.30" /

0.30"

OPI7010 100

OPI7320 890 nm or

935 nm Darlington 6

200 5 / 50 15 0.30" /

0.30"

OPI7340 400

Ordering Information

INCHES

[MILLIMETERS]

DIMENSIONS ARE IN:

RoHS

OPI7002RCE, OPI7010RCE

2 3

1 4

2 3

1 4

OPI7320RCE, OPI7340RCE

Pin # LED Pin # Transistor/ RCE

2 Cathode 3 Collector / Emitter

1 Anode 4 Emitter / Collector

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue A.1 03/07

Page 2 of 3

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Optically Coupled Isolator

OPI7002, OPI7002RCE, OPI7010, OPI710RCE

OPI7320, OPI7320RCE, OPI7340, OPI7340RCE

Notes:

(1) Measured with input leads and output leads shorted.

(2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.

(3) Derate linearly 1.66 mW/° C above 25° C.

Absolute Maximum Ratings (TA = 25° C unless otherwise noted)

Operating Temperature Range -40° C to +85° C

Storage Temperature Range -40° C to +85° C

Input-to-Output Isolation Voltage(1)(2) ±6 kVDC

Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron](3) 260° C

Input Diode

Forward DC Current 50 mA

Peak Forward current (1 µs pulse width, 300 pps) 3 A

Reverse Voltage 2 V

Power Dissipation(3) 100 mW

Output Phototransistor

Collector-Emitter Voltage

OPI7002, OPI7010, OPI7002RCE, OPI7010RCE

OPI7320, OPI7340, OPI7320RCE, OPI7340RCE

30 V

15 V

Emitter-Collector Voltage 5.0 V

Power Dissipation(3) 100 mW

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue A.1 03/07

Page 3 of 3

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Optically Coupled Isolator

OPI7002, OPI7002RCE, OPI7010, OPI710RCE

OPI7320, OPI7320RCE, OPI7340, OPI7340RCE

Electrical Characteristics (TA = 25° C unless otherwise noted)

SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS

Input Diode (See OP140 or OP240 for additional information—for reference only)

VF Forward Voltage - 1.2 1.70 V IF = 10 mA

IR Reverse Current - - 100 µA VR = 2.0 V

Output Phototransistor (OPI7002, OPI7010) (See OP550 for additional information—for reference only)

Output Photodarlington (OPI7320, OPI7340) (See OP560 for additional information—for reference only)

V(BR)CEO

Collector-Emitter Breakdown Voltage

OPI7002/RCE, OPI7010/RCE

OPI7320/RCE, OPI7340/RCE

IC = 100 µA, IF = 0

V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V

IE = 100 µA, IF = 0

ICEO Collector-Emitter Dark Current - - 100 nA

VCE = 10 V, IF = 0

Coupled

IC/ IF

DC Current Transfer Ratio

OPI7002, OPI7002RCE

OPI7010, OPI7010RCE

OPI7320, OPI7320RCE

OPI7340, OPI7340RCE

100

200

400

IF = 10 mA, VCE = 5 V

IF = 5 mA, VCE = 5 V

V(SAT)

Collector-Emitter Saturation Voltage

OPI7002/RCE, OPI7010/RCE

OPI7320/RCE, OPI7340/RCE

0.4

1.0

IF = 10 mA, IC = 0.50 mA

IF = 5 mA, IC = 2 mA

VISO Isolation Voltage(1) 6 - - kVDC See note 1

T(ON)

Turn-On Time

OPI7002/RCE, OPI7010/RCE

OPI7320/RCE, OPI7340/RCE

150

- µs

T(OFF)

Turn-Off Time

OPI7002/RCE, OPI7010/RCE

OPI7320/RCE, OPI7340/RCE

125

CIO Capacitance Input-to-Output(1)

0.2

VIO = 0, F = 1 MHz

VCE = 10 V, IC = 10 mA, RL = 100 Ω

Notes:

(1) Measured with input leads and output leads shorted.